Sex- and melanism-specific variations in the oxidative status of adult tawny owls in response to manipulated reproductive effort

Funding: This work was supported by the Swiss National Science Foundation [grants PPOA-102913 and 3100AO_120517 to AR and 31003A_124988 to PB). © 2015. Published by The Company of Biologists Ltd.

Coal-fired Power Plants with Flexible Amine-based CCS and Co-located Wind Power: Environmental, Economic and Reliability Outcomes

Carbon Capture and Storage (CCS) technologies provide a means to significantly reduce carbon emissions from the existing fleet of fossil-fired plants, and hence can facilitate a gradual transition from conventional to more sustainable sources of electric power. This is especially relevant for coal plants that have a CO2 emission rate that is roughly two times higher than that of natural gas plants. Of the different kinds of CCS technology available, post-combustion amine based CCS is the best developed and hence more suitable for retrofitting an existing coal plant. The high costs from operating CCS could be reduced by enabling flexible operation through amine storage or allowing partial capture of CO2 during high electricity prices. This flexibility is also found to improve the power plant’s ramp capability, enabling it to offset the intermittency of renewable power sources. This thesis proposes a solution to problems associated with two promising technologies for decarbonizing the electric power system: the high costs of the energy penalty of CCS, and the intermittency and non-dispatchability of wind power. It explores the economic and technical feasibility of a hybrid system consisting of a coal plant retrofitted with a post-combustion-amine based CCS system equipped with the option to perform partial capture or amine storage, and a co-located wind farm. A techno-economic assessment of the performance of the hybrid system is carried out both from the perspective of the stakeholders (utility owners, investors, etc.) as well as that of the power system operator.

In order to perform the assessment from the perspective of the facility owners (e.g., electric power utilities, independent power producers), an optimal design and operating strategy of the hybrid system is determined for both the amine storage and partial capture configurations. A linear optimization model is developed to determine the optimal component sizes for the hybrid system and capture rates while meeting constraints on annual average emission targets of CO2, and variability of the combined power output. Results indicate that there are economic benefits of flexible operation relative to conventional CCS, and demonstrate that the hybrid system could operate as an energy storage system: providing an effective pathway for wind power integration as well as a mechanism to mute the variability of intermittent wind power.

In order to assess the performance of the hybrid system from the perspective of the system operator, a modified Unit Commitment/ Economic Dispatch model is built to consider and represent the techno-economic aspects of operation of the hybrid system within a power grid. The hybrid system is found to be effective in helping the power system meet an average CO2 emissions limit equivalent to the CO2 emission rate of a state-of-the-art natural gas plant, and to reduce power system operation costs and number of instances and magnitude of energy and reserve scarcity.

Development and reliability of a direct access sensor using flip chip on flex technology with anisotropic conductive adhesive

Technological developments in biomedical microsystems are opening up new opportunities to improve healthcare procedures. Swallowable diagnostic sensing capsules are an example of these. In none of the diagnostic sensing capsules, is the sensor’s first level packaging achieved via Flip Chip Over Hole (FCOH) method using Anisotropic Conductive Adhesive (ACA). In a capsule application with direct access sensor (DAS), ACA not only provides the electrical interconnection but simultaneously seals the interconnect area and the underlying electronics. The development showed that the ACA FCOH was a viable option for the DAS interconnection. Adequate adhesive formed a strong joint that withstood a shear stress of 120N/mm2 and a compressive stress of 6N required to secure the final sensor assembly in place before encapsulation. Electrical characterization of the ACA joint in a fluid environment showed that the ACA was saturated with moisture and that the ions in the solution actively contributed to the leakage current, characterized by the varying rate of change of conductance. Long term hygrothermal aging of the ACA joint showed that a thermal strain of 0.004 and a hygroscopic strain of 0.0052 were present and resulted in a fatigue like process. In-vitro tests showed that high temperature and acidity had a deleterious effect of the ACA and its joint. It also showed that the ACA contact joints positioned at around or over 1mm would survive the gastrointestinal (GI) fluids and would be able to provide a reliable contact during the entire 72hr of the GI transit time. A final capsule demonstrator was achieved by successfully integrating the DAS, the battery and the final foldable circuitry into a glycerine capsule. Final capsule soak tests suggested that the silicone encapsulated system could survive the 72hr gut transition.

SIGNIFICANCE OF HEAT DISSIPATION IN THE CATHODE CATALYST LAYER ON THE LIFETIME AND RELIABILITY OF POLYMER ELECTROLYTE FUEL CELLS

To study the dissipation of heat generated due to the formation of pinholes that cause local hotspots in the catalyst layer of the Polymer Electrolyte Fuel Cell, a two-phase non-isothermal model has been developed by coupling Darcy’s law with heat transport. The domain under consideration is a section of the membrane electrode assembly with a half-channel and a half-rib. Five potential locations where a pinhole might form were analyzed: at the midplane of the channel, midway between the channel midplane and the channel wall, at the channel or rib wall, midway between the rib midplane and the channel wall, at the midplane of the rib. In the first part of this work, a preliminary thermal model was developed. The model was then refined to account for the two-phase effects. A sensitivity study was done to evaluate the effect of the following properties on the maximum temperature in the domain: Catalyst layer thermal conductivity, the Microporous layer thermal conductivity, the anisotropy factor of the Catalyst layer thermal conductivity, the Porous transport layer porosity, the liquid water distribution and the thickness of the membrane and porous layers. Accounting for the two-phase effects, a slight cooling effect was observed across all hotspot locations. The thermal properties of the catalyst layer were shown to have a limited impact on the maximum temperature in the catalyst layer of new fuel cells without pinhole. However, as hotspots start to appear, thermal properties play a more significant role in mitigating the thermal runaway.

Argaric Sociology: Sex and Death

The detailed, rich and diverse Argaric funerary record offers an opportunity to explore social dimensions that usually remain elusive for prehistoric research, such us social rules on kinship rights and obligations, sexual tolerance and the role of funerary practices in preserving the economic and political organization. This paper addresses these topics through an analysis of the social meaning of Argaric double tombs by looking at body treatment and composition of grave goods assemblages according to gender and class affiliation. The Argaric seems to have been a conservative society, scarcely tolerant regarding homosexuality, and willing to celebrate ancestry associated to certain places as a means of asserting residence and property rights.

A literature review to Examine the Validity and Reliability of group poster presentations as an assessment method of a module in an undergraduate nursing degree programme

The introduction of a poster presentation as a formative assessment method over a multiple choice examination after the first phase of a three phase “health and well-being” module in an undergraduate nursing degree programme was greeted with a storm of criticism from fellow lecturers stating that poster presentations are not valid or reliable and totally irrelevant to the assessment of learning in the module. This paper seeks to investigate these criticisms by investigating the literature regarding producing nurses fit for practice, nurse curriculum development and wider nurse education, the purpose of assessment, validity and reliability to critically evaluate the poster presentation as a legitimate assessment method for these aims.

The Accuracy and Reliability of Traditional Surface Flow Type Mapping: Is It Time for A New Method of Characterising Physical River Habitat?

Surface flow types (SFT) are advocated as ecologically relevant hydraulic units, often mapped visually from the bankside to characterise rapidly the physical habitat of rivers. SFT mapping is simple, non-invasive and cost-efficient. However, it is also qualitative, subjective and plagued by difficulties in recording accurately the spatial extent of SFT units. Quantitative validation of the underlying physical habitat parameters is often lacking, and does not consistently differentiate between SFTs. Here, we investigate explicitly the accuracy, reliability and statistical separability of traditionally mapped SFTs as indicators of physical habitat, using independent, hydraulic and topographic data collected during three surveys of a c. 50m reach of the River Arrow, Warwickshire, England. We also explore the potential of a novel remote sensing approach, comprising a small unmanned aerial system (sUAS) and Structure-from-Motion photogrammetry (SfM), as an alternative method of physical habitat characterisation. Our key findings indicate that SFT mapping accuracy is highly variable, with overall mapping accuracy not exceeding 74%. Results from analysis of similarity (ANOSIM) tests found that strong differences did not exist between all SFT pairs. This leads us to question the suitability of SFTs for characterising physical habitat for river science and management applications. In contrast, the sUAS-SfM approach provided high resolution, spatially continuous, spatially explicit, quantitative measurements of water depth and point cloud roughness at the microscale (spatial scales ≤1m). Such data are acquired rapidly, inexpensively, and provide new opportunities for examining the heterogeneity of physical habitat over a range of spatial and temporal scales. Whilst continued refinement of the sUAS-SfM approach is required, we propose that this method offers an opportunity to move away from broad, mesoscale classifications of physical habitat (spatial scales 10-100m), and towards continuous, quantitative measurements of the continuum of hydraulic and geomorphic conditions which actually exists at the microscale.

Validity and reliability of a pictorial instrument for assessing perceived motor competence in Portuguese children

It is important to assess young children's perceived Fundamental Movement Skill (FMS) competence in order to examine the role of perceived FMS competence in motivation toward physical activity. Children's perceptions of motor competence may vary according to the culture/country of origin; therefore, it is also important to measure perceptions in different cultural contexts. The purpose was to assess the face validity, internal consistency, test–retest reliability and construct validity of the 12 FMS items in the Pictorial Scale for Perceived Movement Skill Competence for Young Children (PMSC) in a Portuguese sample. Methods Two hundred one Portuguese children (girls, n = 112), 5 to 10 years of age (7.6 ± 1.4), participated. All children completed the PMSC once. Ordinal alpha assessed internal consistency. A random subsamples (n = 47) were reassessed one week later to determine test–retest reliability with Bland–Altman method. Children were asked questions after the second administration to determine face validity. Construct validity was assessed on the whole sample with a Bayesian Structural Equation Modelling (BSEM) approach. The hypothesized theoretical model used the 12 items and two hypothesized factors: object control and locomotor skills. Results The majority of children correctly identified the skills and could understand most of the pictures. Test–retest reliability analysis was good, with an agreement ration between 0.99 and 1.02. Ordinal alpha values ranged from acceptable (object control 0.73, locomotor 0.68) to good (all FMS 0.81). The hypothesized BSEM model had an adequate fit. Conclusions The PMSC can be used to investigate perceptions of children's FMS competence. This instrument can also be satisfactorily used among Portuguese children.

Art, sex, and institutions: defining, collecting, and displaying Shunga

In Edo-Japan (c.1603 – 1868) shunga, sexually explicit prints, paintings and illustrated books, were widely produced and disseminated. However, from the 1850s onwards, shunga was suppressed by the government and it has largely been omitted from art history, excluded from exhibitions and censored in publications. Although changes have taken place, cultural institutions continue to be cautious about what they collect and exhibit, with shunga largely remaining a prohibited subject in Japan. Since the 1970s there has been a gradual increase in the acceptance of shunga outside Japan, as evidenced in the growing number of exhibitions and publications. The initial impetus behind this thesis was: Why and how did shunga become increasingly acceptable in Europe and North America in the twentieth century, whilst conversely becoming unacceptable in post-Edo Japan? I discuss how and why attitudes to shunga in the UK and Japan have changed from the Edo period to the present day, and consider how definitions can affect this. My research examines how shunga has been dealt with in relation to private and institutional collecting and exhibitions. In order to gauge modern responses, the 2013 Shunga: Sex and Pleasure in Japanese Art exhibition at the British Museum is used as an in-depth study – utilising mixed methods and an interdisciplinary approach to analyse curatorial and legal decisions, as well as visitor feedback. To-date there are no official or standardised guidelines for the acquisition, cataloguing, or display of sexually explicit artefacts. It is intended that institutions will benefit from my analysis of the changing perceptions of shunga and of previous shunga collections and exhibitions when dealing with shunga or other sexually explicit items in the future.

Validity and reliability of the Cyber-aggression Questionnaire for Adolescents (CYBA)

Cybercrime is a growing and worrisome problem, particularly when it involves minors. Cyber-aggression among adolescents in particular can result in negative legal and psychological consequences for people involved. Therefore, it is important to have instruments to detect these incidents early and understand the problem to propose effective measures for prevention and treatment. This paper aims to design a new self-report, the Cyber-Aggression Questionnaire for Adolescents (CYBA), to evaluate the extent to which the respondent conducts aggressions through a mobile phone or the internet and analyse the factorial and criterion validity and reliability of their scores in a sample of adolescents from Asturias, Spain. The CYBA was administered to 3,148 youth aged between 12 and 18 years old along with three self-reports to measure aggression at school, impulsivity, and empathy. Regarding factorial validity, the model that best represents the structure of the CYBA consists of three factors (Impersonation, Visual-sexual Cyber-aggression, and Verbal Cyber-aggression and Exclusion) and four additional indicators of Visual Cyber-aggression-Teasing/Happy Slapping. Regarding criterion validity, the score on the CYBA correlates positively with aggression at school and impulsivity and negatively with empathy. That is the way cyber-aggression correlates with these three variables, according to previous empirical evidence. The reliability of the scores on each item and factor of the CYBA are adequate. Therefore, the CYBA offers a valid and reliable measure of cyber-aggression in adolescents.

MULTIMODAL PERFORMANCE AND RELIABILITY ANALYSIS OF THE PIERRE AUGER OBSERVATORY NORTH SITE

The Pierre Auger Cosmic Ray Observatory North site employs a large array of surface detector stations (tanks) to detect the secondary particle showers generated by ultra-high energy cosmic rays. Due to the rare nature of ultra-high energy cosmic rays, it is important to have a high reliability on tank communications, ensuring no valuable data is lost. The Auger North site employs a peer-to-peer paradigm, the Wireless Architecture for Hard Real-Time Embedded Networks (WAHREN), designed specifically for highly reliable message delivery over fixed networks, under hard real-time deadlines. The WAHREN design included two retransmission protocols, Micro- and Macro- retransmission. To fully understand how each retransmission protocol increased the reliability of communications, this analysis evaluated the system without using either retransmission protocol (Case-0), both Micro- and Macro-retransmission individually (Micro and Macro), and Micro- and Macro-retransmission combined. This thesis used a multimodal modeling methodology to prove that a performance and reliability analysis of WAHREN was possible, and provided the results of the analysis. A multimodal approach was necessary because these processes were driven by different mathematical models. The results from this analysis can be used as a framework for making design decisions for the Auger North communication system.

Validation and reliability of the Japanese version of the Food Allergy Quality of Life Questionnaire - Parent Form

Background: Food allergy (FA) is a heavy burden for patients and their families and can significantly reduce the quality of life (QoL) of both. To provide adequate support, qualitative and quantitative evaluation of the parents' QoL may be helpful. The objective of this study is to develop and validate a Japanese version of the Food Allergy QoL QuestionnaireeParent Form (FAQLQ-PF-J), an internationally validated disease-specific QoL measurement of the parental burden of having a child with FA. Methods: The FAQLQ-PF and the Food Allergy Independent Measure (FAIM), an instrument to test the construct validity of the FAQLQ-PF-J, were translated into Japanese. After language validation, the questionnaires were administered to parents of FA children aged 0e12 years and those of age-matched healthy (without FA) children. Internal consistency (by Cronbach's a) and test-retest reliability were evaluated. Construct validity and discriminant validity were also examined. Results: One hundred twenty-seven parents of children with FA and 48 parents of healthy children filled out the questionnaire. The FAQLQ-PF-J showed excellent internal consistency (Cronbach's a > 0.77) and test-retest reliability. Good construct validity was demonstrated by significant correlations between the FAQLQ-PF-J and FAIM-J scores. It discriminated parents of children with FA from those without. The scores were significantly higher (lower QoL) for parents of FA children with a history of anaphylaxis than those without, for those with >6 FA-related symptoms experienced than those with less FA-related symptoms. Conclusions: The FAQLQ-PF-J is a reliable and valid measure of the parental burden of FA in children.

AN INVESTIGATION OF THE RELIABILITY AND VALIDITY OF THE CENTER FOR EPIDEMIOLOGIC STUDIES DEPRESSION SCALE IN THREE ETHNIC GROUPS

Epidemiologic studies of mental disorder have called attention to the need for identifying untreated cases and to the inadequacies of the instruments available for this purpose. Accurate case ascertainment devices are the basis of sound epidemiology. Without these, neither case classification nor analytic studies of risk factors is possible.^ The purpose of this research was to examine the reliability and validity of an instrument designed to measure depressive symptoms in community populations--the Center for Epidemiologic Studies Depression Scale (CES-D Scale). Two particular foci of the study were whether or not the scale had the same statistical structure across three ethnic groups and whether or not the magnitude and pattern of rates of symptoms for these groups were affected by one source of response error, that due to response tendencies. The effects of age and education on the pattern and magnitude of rates also were examined. In addition, the reliability and validity of the measures of response tendencies were assessed.^ The study population consisted of residents of Alameda County, California. A stratified sample of approximately 700 whites, blacks and Mexican-Americans was interviewed in the summer and fall of 1978.^ The results of the analysis indicated that the scale was reliable and measured a similar content domain across the three ethnic groups. The unadjusted sex- and ethnic-specific rates of depressive symptoms showed an ethnic pattern for both sexes: rates for whites were lowest, those for Mexican-Americans were highest, and those for blacks were intermediate. Measures of response tendencies--need for social approval, trait desirability, and acquiescence--affected the magnitude of the rates for most comparisons. Likewise, the pattern of rates changed somewhat from that originally observed. The one fairly consistent observation was that rates for Mexican-American women were higher than those for the other two female subgroups in most of the comparisons. These results must be considered in the context of the reliability and validity assessment of the measures of response tendencies which indicated the tenuousness of these measures.^ Age affected the ethnic pattern of rates for men in an inconsistent way; for women, Mexican-Americans continued to have higher rates than whites or blacks in all age categories. Education affected the magnitude of rates for women but not for men. For both men and women, Mexican-Americans had higher rates in all educational strata. Rates for women showed an inverse association with education while those for men did not. ^

The Short-EMBU in Australia, Spain, and Venezuela - Factorial invariance, and associations with sex roles, self-esteem, and Eysenckian personality dimensions

The short(s)-EMBU (Swedish acronym for Egna Minnen Betraffande Uppfostran [My memories of upbringing]) consists of 23 items, is based on the early 81-item EMBU, and was developed out of the necessity of having a brief measure of perceived parental rearing practices when the clinical and/or research context does not adequately permit application of time-consuming test batteries. The s-EMBU comprises three subscales: Rejection., Emotional Warmth, and (Over)Protection. The factorial and/or construct validity and reliability of the s-EMBU were examined in samples comprising a total of 1950 students from Australia, Spain, and Venezuela. The data were presented for the three national groups separately. Findings confirmed the cross-national validity of the factorial structure underlying the s-EMBU. Rejection by fathers and mothers was consistently associated with high trait-neuroticism and low self-esteem in recipients of both sexes in each nation, as was high parental emotional warmth with high femininity (humility). The findings on factorial validity are in keeping with previous ones obtained in East Germany, Greece, Guatemala, Hungary, Italy, and Sweden. The s-EMBU is again recommended for use in several different countries as. a reliable, functional equivalent to the original 81-item EMBU.