Contributions to the Resilience Management in the Internet of Things

El auge del "Internet de las Cosas" (IoT, "Internet of Things") y sus tecnologías asociadas han permitido su aplicación en diversos dominios de la aplicación, entre los que se encuentran la monitorización de ecosistemas forestales, la gestión de catástrofes y emergencias, la domótica, la automatización industrial, los servicios para ciudades inteligentes, la eficiencia energética de edificios, la detección de intrusos, la gestión de desastres y emergencias o la monitorización de señales corporales, entre muchas otras. La desventaja de una red IoT es que una vez desplegada, ésta queda desatendida, es decir queda sujeta, entre otras cosas, a condiciones climáticas cambiantes y expuestas a catástrofes naturales, fallos de software o hardware, o ataques maliciosos de terceros, por lo que se puede considerar que dichas redes son propensas a fallos. El principal requisito de los nodos constituyentes de una red IoT es que estos deben ser capaces de seguir funcionando a pesar de sufrir errores en el propio sistema. La capacidad de la red para recuperarse ante fallos internos y externos inesperados es lo que se conoce actualmente como "Resiliencia" de la red. Por tanto, a la hora de diseñar y desplegar aplicaciones o servicios para IoT, se espera que la red sea tolerante a fallos, que sea auto-configurable, auto-adaptable, auto-optimizable con respecto a nuevas condiciones que puedan aparecer durante su ejecución. Esto lleva al análisis de un problema fundamental en el estudio de las redes IoT, el problema de la "Conectividad". Se dice que una red está conectada si todo par de nodos en la red son capaces de encontrar al menos un camino de comunicación entre ambos. Sin embargo, la red puede desconectarse debido a varias razones, como que se agote la batería, que un nodo sea destruido, etc. Por tanto, se hace necesario gestionar la resiliencia de la red con el objeto de mantener la conectividad entre sus nodos, de tal manera que cada nodo IoT sea capaz de proveer servicios continuos, a otros nodos, a otras redes o, a otros servicios y aplicaciones. En este contexto, el objetivo principal de esta tesis doctoral se centra en el estudio del problema de conectividad IoT, más concretamente en el desarrollo de modelos para el análisis y gestión de la Resiliencia, llevado a la práctica a través de las redes WSN, con el fin de mejorar la capacidad la tolerancia a fallos de los nodos que componen la red. Este reto se aborda teniendo en cuenta dos enfoques distintos, por una parte, a diferencia de otro tipo de redes de dispositivos convencionales, los nodos en una red IoT son propensos a perder la conexión, debido a que se despliegan en entornos aislados, o en entornos con condiciones extremas; por otra parte, los nodos suelen ser recursos con bajas capacidades en términos de procesamiento, almacenamiento y batería, entre otros, por lo que requiere que el diseño de la gestión de su resiliencia sea ligero, distribuido y energéticamente eficiente. En este sentido, esta tesis desarrolla técnicas auto-adaptativas que permiten a una red IoT, desde la perspectiva del control de su topología, ser resiliente ante fallos en sus nodos. Para ello, se utilizan técnicas basadas en lógica difusa y técnicas de control proporcional, integral y derivativa (PID - "proportional-integral-derivative"), con el objeto de mejorar la conectividad de la red, teniendo en cuenta que el consumo de energía debe preservarse tanto como sea posible. De igual manera, se ha tenido en cuenta que el algoritmo de control debe ser distribuido debido a que, en general, los enfoques centralizados no suelen ser factibles a despliegues a gran escala. El presente trabajo de tesis implica varios retos que conciernen a la conectividad de red, entre los que se incluyen: la creación y el análisis de modelos matemáticos que describan la red, una propuesta de sistema de control auto-adaptativo en respuesta a fallos en los nodos, la optimización de los parámetros del sistema de control, la validación mediante una implementación siguiendo un enfoque de ingeniería del software y finalmente la evaluación en una aplicación real. Atendiendo a los retos anteriormente mencionados, el presente trabajo justifica, mediante una análisis matemático, la relación existente entre el "grado de un nodo" (definido como el número de nodos en la vecindad del nodo en cuestión) y la conectividad de la red, y prueba la eficacia de varios tipos de controladores que permiten ajustar la potencia de trasmisión de los nodos de red en respuesta a eventuales fallos, teniendo en cuenta el consumo de energía como parte de los objetivos de control. Así mismo, este trabajo realiza una evaluación y comparación con otros algoritmos representativos; en donde se demuestra que el enfoque desarrollado es más tolerante a fallos aleatorios en los nodos de la red, así como en su eficiencia energética. Adicionalmente, el uso de algoritmos bioinspirados ha permitido la optimización de los parámetros de control de redes dinámicas de gran tamaño. Con respecto a la implementación en un sistema real, se han integrado las propuestas de esta tesis en un modelo de programación OSGi ("Open Services Gateway Initiative") con el objeto de crear un middleware auto-adaptativo que mejore la gestión de la resiliencia, especialmente la reconfiguración en tiempo de ejecución de componentes software cuando se ha producido un fallo. Como conclusión, los resultados de esta tesis doctoral contribuyen a la investigación teórica y, a la aplicación práctica del control resiliente de la topología en redes distribuidas de gran tamaño. Los diseños y algoritmos presentados pueden ser vistos como una prueba novedosa de algunas técnicas para la próxima era de IoT. A continuación, se enuncian de forma resumida las principales contribuciones de esta tesis: (1) Se han analizado matemáticamente propiedades relacionadas con la conectividad de la red. Se estudia, por ejemplo, cómo varía la probabilidad de conexión de la red al modificar el alcance de comunicación de los nodos, así como cuál es el mínimo número de nodos que hay que añadir al sistema desconectado para su re-conexión. (2) Se han propuesto sistemas de control basados en lógica difusa para alcanzar el grado de los nodos deseado, manteniendo la conectividad completa de la red. Se han evaluado diferentes tipos de controladores basados en lógica difusa mediante simulaciones, y los resultados se han comparado con otros algoritmos representativos. (3) Se ha investigado más a fondo, dando un enfoque más simple y aplicable, el sistema de control de doble bucle, y sus parámetros de control se han optimizado empleando algoritmos heurísticos como el método de la entropía cruzada (CE, "Cross Entropy"), la optimización por enjambre de partículas (PSO, "Particle Swarm Optimization"), y la evolución diferencial (DE, "Differential Evolution"). (4) Se han evaluado mediante simulación, la mayoría de los diseños aquí presentados; además, parte de los trabajos se han implementado y validado en una aplicación real combinando técnicas de software auto-adaptativo, como por ejemplo las de una arquitectura orientada a servicios (SOA, "Service-Oriented Architecture"). ABSTRACT The advent of the Internet of Things (IoT) enables a tremendous number of applications, such as forest monitoring, disaster management, home automation, factory automation, smart city, etc. However, various kinds of unexpected disturbances may cause node failure in the IoT, for example battery depletion, software/hardware malfunction issues and malicious attacks. So, it can be considered that the IoT is prone to failure. The ability of the network to recover from unexpected internal and external failures is known as "resilience" of the network. Resilience usually serves as an important non-functional requirement when designing IoT, which can further be broken down into "self-*" properties, such as self-adaptive, self-healing, self-configuring, self-optimization, etc. One of the consequences that node failure brings to the IoT is that some nodes may be disconnected from others, such that they are not capable of providing continuous services for other nodes, networks, and applications. In this sense, the main objective of this dissertation focuses on the IoT connectivity problem. A network is regarded as connected if any pair of different nodes can communicate with each other either directly or via a limited number of intermediate nodes. More specifically, this thesis focuses on the development of models for analysis and management of resilience, implemented through the Wireless Sensor Networks (WSNs), which is a challenging task. On the one hand, unlike other conventional network devices, nodes in the IoT are more likely to be disconnected from each other due to their deployment in a hostile or isolated environment. On the other hand, nodes are resource-constrained in terms of limited processing capability, storage and battery capacity, which requires that the design of the resilience management for IoT has to be lightweight, distributed and energy-efficient. In this context, the thesis presents self-adaptive techniques for IoT, with the aim of making the IoT resilient against node failures from the network topology control point of view. The fuzzy-logic and proportional-integral-derivative (PID) control techniques are leveraged to improve the network connectivity of the IoT in response to node failures, meanwhile taking into consideration that energy consumption must be preserved as much as possible. The control algorithm itself is designed to be distributed, because the centralized approaches are usually not feasible in large scale IoT deployments. The thesis involves various aspects concerning network connectivity, including: creation and analysis of mathematical models describing the network, proposing self-adaptive control systems in response to node failures, control system parameter optimization, implementation using the software engineering approach, and evaluation in a real application. This thesis also justifies the relations between the "node degree" (the number of neighbor(s) of a node) and network connectivity through mathematic analysis, and proves the effectiveness of various types of controllers that can adjust power transmission of the IoT nodes in response to node failures. The controllers also take into consideration the energy consumption as part of the control goals. The evaluation is performed and comparison is made with other representative algorithms. The simulation results show that the proposals in this thesis can tolerate more random node failures and save more energy when compared with those representative algorithms. Additionally, the simulations demonstrate that the use of the bio-inspired algorithms allows optimizing the parameters of the controller. With respect to the implementation in a real system, the programming model called OSGi (Open Service Gateway Initiative) is integrated with the proposals in order to create a self-adaptive middleware, especially reconfiguring the software components at runtime when failures occur. The outcomes of this thesis contribute to theoretic research and practical applications of resilient topology control for large and distributed networks. The presented controller designs and optimization algorithms can be viewed as novel trials of the control and optimization techniques for the coming era of the IoT. The contributions of this thesis can be summarized as follows: (1) Mathematically, the fault-tolerant probability of a large-scale stochastic network is analyzed. It is studied how the probability of network connectivity depends on the communication range of the nodes, and what is the minimum number of neighbors to be added for network re-connection. (2) A fuzzy-logic control system is proposed, which obtains the desired node degree and in turn maintains the network connectivity when it is subject to node failures. There are different types of fuzzy-logic controllers evaluated by simulations, and the results demonstrate the improvement of fault-tolerant capability as compared to some other representative algorithms. (3) A simpler but more applicable approach, the two-loop control system is further investigated, and its control parameters are optimized by using some heuristic algorithms such as Cross Entropy (CE), Particle Swarm Optimization (PSO), and Differential Evolution (DE). (4) Most of the designs are evaluated by means of simulations, but part of the proposals are implemented and tested in a real-world application by combining the self-adaptive software technique and the control algorithms which are presented in this thesis.

Desarrollo de una plataforma de gestión de un laboratorio automatizado

El presente TFG está enmarcado en el contexto de la biología sintética (más concretamente en la automatización de protocolos) y representa una parte de los avances en este sector. Se trata de una plataforma de gestión de laboratorios autónomos. El resultado tecnológico servirá para ayudar al operador a coordinar las máquinas disponibles en un laboratorio a la hora de ejecutar un experimento basado en un protocolo de biología sintética. En la actualidad los experimentos biológicos tienen una tasa de éxito muy baja en laboratorios convencionales debido a la cantidad de factores externos que intervienen durante el protocolo. Además estos experimentos son caros y requieren de un operador pendiente de la ejecución en cada fase del protocolo. La automatización de laboratorios puede suponer un aumento de la tasa de éxito, además de una reducción de costes y de riesgos para los trabajadores en el entorno del laboratorio. En la presente propuesta se pretende que se dividan las distintas entidades de un laboratorio en unidades funcionales que serán los elementos a ser coordinados por la herramienta resultado del TFG. Para aportar flexibilidad a la herramienta se utilizará una arquitectura orientada a servicios (SOA). Cada unidad funcional desplegará un servicio web proporcionando su funcionalidad al resto del laboratorio. SOA es esencial para la comunicación entre máquinas ya que permite la abstracción del tipo de máquina que se trate y como esté implementada su funcionalidad. La principal dificultad del TFG consiste en lidiar con las dificultades de integración y coordinación de las distintas unidades funcionales para poder gestionar adecuadamente el ciclo de vida de un experimento. Para ello se ha realizado un análisis de herramientas disponibles de software libre. Finalmente se ha escogido la plataforma Apache Camel como marco sobre el que crear la herramienta específica planteada en el TFG. Apache Camel juega un papel importantísimo en este proyecto, ya que establece las capas de conexión a los distintos servicios y encamina los mensajes oportunos a cada servicio basándose en el contenido del fichero de entrada. Para la preparación del prototipo se han desarrollado una serie de servicios web que permitirán realizar pruebas y demostraciones de concepto de la herramienta en sí. Además se ha desarrollado una versión preliminar de la aplicación web que utilizará el operador del laboratorio para gestionar las peticiones, decidiendo que protocolo se ejecuta a continuación y siguiendo el flujo de tareas del experimento.---ABSTRACT---The current TFG is bound by synthetic biology context (more specifically in the protocol automation) and represents an element of progression in this sector. It consists of a management platform for automated laboratories. The technological result will help the operator to coordinate the available machines in a lab, this way an experiment based on a synthetic biological protocol, could be executed. Nowadays, the biological experiments have a low success rate in conventional laboratories, due to the amount of external factors that intrude during the protocol. On top of it, these experiments are usually expensive and require of an operator monitoring at every phase of the protocol. The laboratories’ automation might mean an increase in the success rate, and also a reduction of costs and risks for the lab workers. The current approach is hoped to divide the different entities in a laboratory in functional units. Those will be the elements to be coordinated by the tool that results from this TFG. In order to provide flexibility to the system, a service-oriented architecture will be used (SOA). Every functional unit will deploy a web service, publishing its functionality to the rest of the lab. SOA is essential to facilitate the communication between machines, due to the fact that it provides an abstraction on the type of the machine and how its functionality is implemented. The main difficulty of this TFG consists on grappling with the integration and coordination problems, being able to manage successfully the lifecycle of an experiment. For that, a benchmark has been made on the available open source tools. Finally Apache Camel has been chosen as a framework over which the tool defined in the TFG will be created. Apache Camel plays a fundamental role in this project, given that it establishes the connection layers to the different services and routes the suitable messages to each service, based on the received file’s content. For the prototype development a number of services that will allow it to perform demonstrations and concept tests have been deployed. Furthermore a preliminary version of the webapp has been developed. It will allow the laboratory operator managing petitions, to decide what protocol goes next as it executes the flow of the experiment’s tasks.

El centro comercial : una teoría tipológica : claves para el reconocimiento de una arquitectura ignorada

Existe en el panorama edificado un patrimonio construido que se reconoce como Centro Comercial. Un conjunto entendido, en sentido genérico, como familia arquitectónica que tiene características propias y específicas que la identifican. El objeto de la presente tesis doctoral consiste en argumentar que este conjunto constituye un nuevo tipo en el panorama de las tipologías arquitectónicas. Un tipo con entidad propia, que se conecta a una forma diferente de entender la idea de modelo. Un concepto que va más allá de la consideración tradicional del término. Modelo virtual. Este tipo, que surge de una estructura teórica que hemos denominado teoría tipológica, se constituye en una herramienta más para el estudio y el desarrollo proyectual de los espacios arquitectónicos, tanto del propio Centro Comercial como del conjunto de la disciplina arquitectónica, como referencia legítima. El presente trabajo de tesis se inicia con un bloque introductorio denominado Método. Definimos en él una metodología que hemos llamado emocional. Trata de la oportunidad de la tesis. Del porqué de un título que recoge la palabra ignorada. Del interés que suscita el asunto en el contexto del momento presente. Oportunidad e interés en base a una vida profesional dedicada al mundo del Centro Comercial y a la importancia del patrimonio elegido como objeto de estudio. También ha sido un aliciente detectar como las planificaciones del territorio y de los ámbitos de las relaciones colectivas no han sido capaces de integrar un resultado satisfactorio. Quizás por no considerar la complejidad de sus muchas facetas. En consecuencia, el texto busca la esencia del Centro Comercial como soporte para la crítica de su impacto en los nuevos escenarios de relación que la sociedad y el entorno físico imponen. Ámbitos donde los mecanismos históricos del asociacionismo tradicional han dado paso a otros, como el Centro Comercial, de exaltación del individualismo, pero demandados por una sociedad que se identifica con ellos. Espacios que, con Galbraith, existen por de la perversidad intrínseca del binomio consumo-producción que inducen la perplejidad. Ésta pasa a formar parte de la esencia del nuevo espacio comercial, como quedó de manifiesto en el Congreso de Minnesota de 1997, sobre el Centro Comercial. Una sociedad que ha girado hacia el logro material en términos de culto, ocasionando creciente valor significante del consumo. Razón última de la humanidad al decir de Rem Koolhaas. Culto que desemboca en la urgencia de alcanzar niveles de estatus y de identificación con el grupo. Dos parámetros que marcan la relación con el otro. Relación de comparación que excita la necesidad de posesión de objetos que llevaban a recrear en el consumidor la ilusión de ser especiales, de no pasar desapercibidos. El producto de consumo, el objeto, se eleva a la consideración de valor social. En el Centro Comercial se venden valores. Marketing de valores. El deseo del individuo, no la necesidad, queda involucrado en el proceso. La oportunidad y el interés de este estudio surgen además para aclarar el significado de un espacio que sirve al consumidor y a su entorno. Un significado que alcanza sentido, entre otros, por la aparición de un nuevo contexto tras la Segunda Guerra Mundial. Suburbanización, automóvil, nivel de vida, un nuevo papel de la mujer. La Era del Consumo. Una era que genera la paradoja de un individuo con autodeterminación y autosuficiencia crecientes, en un mundo cada vez más condicionado y controlado por dinámicas de ofertas mediatizadas e ilimitadas. La arquitectura en este contexto ha de juzgarse por su relación con un hombre contemporáneo que camina hacia una progresiva excepcionalidad. Cerramos la presentación justificando el término ignorada que aparece en el Título de la Tesis. Subrayamos la escasa existencia de estudios estructurados que relacionen Centro Comercial y arquitectura. Realidad que se constata partiendo del libro de Pevsner, Historia de las Tipologías Arquitectónicas, de 1976. Analizamos también la aceptación que el Centro Comercial, valorado en algunos ámbitos como arquitectura populista. Primer Capítulo, los antecedentes. Se propone un recorrido histórico por la arquitectura comercial de todos los tiempos. El Documento busca concretar las características de la arquitectura comercial a lo largo de la historia para determinar relaciones entre ella y el Centro Comercial. Estas correspondencias van a permitir contestar la pregunta retórica que nos hacemos al inicio del Capítulo: ¿Es la arquitectura del Centro Comercial una arquitectura subsidiaria, o tiene personalidad propia independiente de la del mundo comercial? Con Zevi40, queremos dejar constancia que la relación arquitectura-historia es imprescindible en la tarea proyectual. Un análisis novedoso solo es posible desde la búsqueda de unas raíces auténticas. Así mismo, con Guy de Maupassant, estamos convencidos que “La arquitectura, a través de los siglos, ha tenido el privilegio de dar un símbolo a cada una de las épocas, de resumir con un pequeñísimo número de monumentos típicos, el modo de pensar, de soñar de una raza y de una civilización”. Este recorrido se inicia interpretando la arquitectura comercial minoica. Llegaremos, paso a paso, hasta el siglo XX, los grandes itinerarios comerciales y el Centro Comercial. Se descubren una serie de invariantes que permiten comparar y extraer conclusiones. Resulta novedoso constatar que el Centro Comercial nace para dar respuesta al hombre contemporáneo en su afán consumista. También lo es la rápida implantación y evolución del Centro Comercial en un corto periodo de sesenta años frente al ritmo sosegado de otras soluciones comerciales. Novedad es ver como el comercio y sus arquitecturas nacen abiertos, bajo tenderetes y el Centro Comercial se presenta cerrado. Así mismo, las referencias sacras constituyen un elemento de novedad para la reflexión, en un contexto materialista. Y tantas otras. En Minos, la óptica comercial ofrece otra visión de su legendaria cultura. ¿Palacio o plataforma logística?, gestión centralizada del intercambio, ¿vida pública y vida privada? Así, hasta llegar al siglo XIX. Sus las galerías y sus pasajes acristalados concebidos en primera instancia como medida de recomposición urbana. Espacio entendido desde lo público-privado, desde lo interior-exterior, desde el dentro-afuera, desde lo cerrado-abierto. Con los nuevos mercados de abastos, representan una revolución en el ámbito de la funcionalidad, de la máquina, de la gestión moderna y de las relaciones del ciudadano con la ciudad apoyado en base al intercambio de bienes de consumo. El Centro Comercial es heredero de esta transformación. El Gran Almacén, por otra parte, es el reflejo de otra gran revolución. La que va ligada a la producción y comercialización en masa, las comunicaciones, el precio fijo y el aumento del nivel de vida. El Centro Comercial reinterpreta estas situaciones insertándolas en un nuevo modelo de gestión. En el siglo XX, maestro en técnicas de venta, aparece el hipermercado. El Híper, con su carga de pedagogía, se incorpora al esquema orgánico del Centro Comercial. La tienda en si misma constituye la pieza base de dicho puzle orgánico. Es en esta época cuando la tienda empieza su despegue autónomo como arquitectura, aportando su experiencia. Tras ello, llegamos a las grandes rutas comerciales, que proponemos como metáfora del shopping. Cerramos el capítulo concluyendo con Eugenio Ferrer que “si establecemos una relación entre el espacio y el capitalismo, entonces podemos inferir que los espacios del consumo de masas (ECM) son configuraciones nuevas respecto al pasado (...), pero el sistema que lo introduce no lo es del todo”. Segundo Capítulo. Búsqueda de claves que permitan el reconocimiento del Centro Comercial. Llegados a este punto y con la perspectiva del tiempo cabe preguntarnos, ¿qué entendemos pues por Centro Comercial? ¿Cómo lo percibimos? Abordamos ahora el problema de la percepción del Centro Comercial y su significado. Además de constituirse en símbolo, referencia siempre presente, la eficacia del Shopping es una de las principales causas de su poder de atracción. El Centro Comercial resulta de la síntesis de la revolución del consumo y de la revolución de la gestión. Espacio eficaz del entretenimiento como destino. El usuario resuelve su vida cotidiana dentro de un hábitat que considera propio y que se entiende como el lugar hiperbólico de la transacción comercial. Espacio de la abundancia para el disfrute. Una arquitectura involucrada en esta eficacia. Su sentido del lugar no es otro que el Shopping, que se desenvuelve de forma análoga en todas partes. El hogar del consumidor. Las nuevas catedrales. Las catedrales del consumo. Destino místico. Lugar de peregrinación para el consumidor fervoroso. Espacio sagrado que integra al usuario en la cultura dominante. Cultura del consumo. Templos, donde el tiempo ha perdido su sentido. Paraíso. Un espacio donde la altura, la luz natural, la dimensión general refuerzan el carácter sacro de un espacio para una nueva religión laica. Un espacio seguro, protegido que nos acerca a ideas como la de útero materno, con su carga de calidez y de significación erótica aplicado al encuentro compra-comprador y, ligado a ello, la literatura especializada habla del Centro Comercial como nave espacial hiperesterilizada o de agujero negro que absorbe la energía cultural. Más allá, la simulación, donde se percibe un simulacro de ciudad. Simulacro coherente con todo lo que el Shopping desencadena a su alrededor. El lugar de los sueños, de la fantasía. Aquí los productos se han metamorfoseado en fetiches, en significados. Televisión tridimensional, donde el usuario actúa guiado por una pulsión similar al zapping. Espacio lúdico de la fascinación por comprar o de imaginar que se compra. Espacio de simulaciones que llevan a la ensoñación. Un nuevo lugar que sustituye al espacio cotidiano, con el señuelo de la protección, en un contexto imaginariamente público. Espacio de la hiperrealidad donde no se distingue la realidad de la fantasía, donde tras episodios de confusión y desconcierto, se borran las fronteras con lo imaginario. Espacio mágico, escenario del gran espectáculo del consumo, controlado milimétricamente, al modo de la visita a un gran monumento, que ha de sobrevivir a los tiempos para dar testimonio de nuestro momento. Un icono, un símbolo que transmite un mensaje, que solo el consumidor es capaz de interpretar. Una agitada mezcla, sin precedentes, de percepciones que hablan de perplejidad y asombro ante el fenómeno del Centro Comercial, su espacio y las reacciones del hombre contemporáneo. ¿Cuáles serían las claves que nos permitirían reconocer la calidad esencial de un Centro Comercial, en esta concurrencia de perplejidades? Primero, la función de servicio. Un espacio donde ocurren muchas más cosas que lo obvio, que la compra. Un edificio que se involucra con el entorno de la mano de lo inesperado, la sorpresa y las expectativas. Esta vocación de servicio conecta Centro Comercial y naturaleza arquitectónica. Función que sugiere percepciones ligadas a la experiencia de compra. Organismo que vive y late al unísono con su visitante, colocándose al servicio de sus necesidades, de su afán de consumo, del que vive. Segundo, la comunidad servida. El Centro comercial sirve a una sociedad concreta. La sociedad consumista. Una nueva sociedad que se identifica con el edificio desarrollando un sentido de comunidad al nivel de sus deseos. Esta comunidad que se configura a su alrededor, constituye el activo más poderoso para el éxito de su realidad cotidiana y de su futuro. Tercero, un compromiso de carácter holístico. La economía de la experiencia aplicada al afán consumista de una sociedad identificada con su Centro, da lugar a una experiencia holística planificada. Diseño emocional. Colaboración para el éxito de un conjunto de establecimientos comerciales que participan en la aventura espacio-comercial del Centro Comercial. Ellos son los inductores primarios del consumo. Pero esta colaboración tiene su culminación en la amplificación del mensaje, como un inmenso altavoz, que proviene de la unidad configurada por todos ellos. El reflejo de esta amplificación de mensajes, desde la poderosa unidad constituida, es el aumento de la rentabilidad, fin último de la operación. Cuarto, la forma a través de una identificación de carácter gestáltico. Desde la lectura gestáltica que hacemos de la unidad holística, se advierte una poderosa capacidad de comunicación del sistema con su contexto. Centro y entorno se tornan entonces cómplices que complementan sus realidades. El Centro Comercial, arquitectura estructurada como sistema se percibe –ha de percibirse- como forma unitaria que procede de una mirada de raíz gestáltica que continuamente la recompone desde una óptica espacial y física, ligada a la experiencia individual. Esta unidad formal, más allá de la forma real, se constituye en esencia de de su arquitectura. Quinto, el Centro Comercial como sistema. Un sistema soportado por la Teoría General de Sistemas. La consideración del Centro Comercial como sistema es consecuencia de su estructura holística. El todo no se comporta como la suma de las partes y estas no lo hacen como lo harían en solitario. De aquí surge la necesidad de diálogo permanente entre la comercialización –proceso de incorporación de partes- y su traducción al mundo del diseño –proceso de articular arquitectónicamente las partes. Como sistema así configurado, el Centro Comercial se inserta en el paradigma contemporáneo, lo que genera realidades duales que no son excluyentes y reacciones de perplejidad e incertidumbre que el sistema corrige con su capacidad de autorregulación. Aparece también el espectador cuántico, el visitante, el consumidor, que interactúa con el sistema. Desde las herramientas que nos aporta la idea de sistema complejo, afrontamos el Mix Comercial -en definitiva la eficaz localización de las piezas en orden a sus relaciones y al organismo resultante- y su incidencia en la arquitectura que estamos concibiendo. Una arquitectura impredecible por lo mutable, que se erige en reto de la operación y del diseñador. Diseño que, de la mano del concepto de sistema se convierte en herramienta a mayor gloria de la operación global. El debate del estilismo no será más que el resultado del análisis en busca del éxito de esta operación. Sexto, una arquitectura de la negociación. Negociación como mecanismo proyectual y como resultado. La solución de proyecto nunca resulta evidente en el Centro Comercial como consecuencia de lo imprevisible del propio proceso de configuración. Su concreción solo puede ser fruto del compromiso de todos los agentes por conseguir el objetivo de la operación. Esto se consigue desde el equilibrio de intereses. Comerciales y de diseño. Un compromiso con la negociación y una negociación íntimamente ligada a la coordinación. Séptimo, el espacio y el tiempo. El debate espacio-tiempo condiciona y estructura la percepción del Centro Comercial. Introducimos conceptos como cronotopo –el instante y el lugar donde ocurre algo- y paradoja –incoherencia de la relación causa efecto- que sitúan el vínculo entre el tiempo y el espacio del Centro Comercial en un contexto de Shopping. En el discurrir paralelo del tiempo histórico –el tiempo de fuera- y del tiempo interior, el de dentro del Centro Comercial –tiempo presente o intemporalidad-, se produce el triunfo social del Centro Comercial que se traduce en haber sabido resolver en el espacio y en el tiempo las paradojas postmodernas del hombre contemporáneo. Octavo, de lo global. Globalidad que no es ajena a lo local. Una arquitectura que insertada en la dinámica de una economía de ámbito mundial, refleja las contradicciones que ella impone, fundamentalmente en los procesos de inclusión y exclusión, afectando de manera decisiva al debate de lo local, que el Centro Comercial debe incorporar como herramienta ineludible de reconocimiento. Terminamos el capítulo segundo manifestando como estas ocho claves, asumidas en su conjunto, confirman que el Centro Comercial puede aparecer como un todo conceptual cohesionado, pasando a formar parte de una familia arquitectónica coherente, cuya estructura funcional somos capaces de establecer. El Capítulo Tercero presenta con detalle la figura del arquitecto Víctor Gruen, creador reconocido del moderno Centro Comercial. Presentamos su trayectoria profesional observando como las diferentes claves analizadas en capítulos anteriores van apareciendo de manera natural a lo largo de ella "Victor Gruen may well have been the most influential architect of the twentieth century." Malcolm Gladwell. The Terrazo Jungle. Fifty Years Ago, The Mall Was Born. America Never Would Be The Same. 2004. In The New Yorker. Hombre complejo, conflictivo. Las paradojas a lo largo de su carrera fueron notables. Sin embargo siempre apareció como un hombre recto. Garret Eckbo, reconocido paisajista y colaborador de Gruen en el Centro Comercial peatonal del Centro urbano de Fresno, California, se asombraba de que alguien como Gruen hubiese sido capaz de combinar cortesía y humanidad en la carrera de ratas (sic) en la que se convirtió el universo de la comercialización americana y mantener la integridad542. Philip Johnson, en 1962, ponderando las muchas habilidades de Gruen manifestó que no estaba seguro si alguno de ellos, arquitectos artistas, hubiera sido capaz de hacer lo que Gruen hizo. A más, sobre Gruen, manifestó lo siguiente: "... El va más allá de la creación de un bello edificio. En jugar con la gente y sugerir lo que tienen que hacer, es un maestro. Y obtiene buenos resultados como hace la escultura. El suyo es un arte cívico, un sentido cívico.... Él es capaz de sentarse y poner cosas juntas. No es pomposo ni vano. Yo no me reuniría con él para hablar del diseño (de edificios). Víctor siente que cuando se habla de diseño se está ignorando todo el contexto... Su arquitectura es poderosamente limpia, no vuela la fantasía. Pero cuando te haces con su complejidad, ves que has descubierto algo más allá del diseño.... No puedes decir que haya alguien como él. La arquitectura tiene la suerte de tenerle como arquitecto..." Philip Johnson. Article in Fortune Review. 1962. El Documento de tesis cierra la visión de Gruen realizando un recorrido por los diferentes capítulos de su libro esencial, Shopping Towns Usa: The Planning of Shopping Centers. Solo su índice resulta un monumento al proceso de gestación del Centro Comercial. El libro, aquí simplemente mostrado en su estructura básica como un silencioso testigo, es la referencia canónica los Centros Comerciales contemporáneos, desde su aparición. . El Cuarto Capítulo del Documento de tesis es una recapitulación del trabajo anterior, en el que se sintetizan los conceptos de función y estilo relacionados con el Centro Comercial, se define en qué consiste cada uno de ellos y como, a partir de ahí, podemos afirmar que nos encontramos ante un tipo arquitectónico nuevo en el panorama de la disciplina arquitectónica. Terminamos el Capítulo integrando el Centro Comercial con un cuerpo teórico de referencias que se remiten a un tipo arquitectónico concreto y particular, acogiendo su singularidad como fenómeno arquitectónico autónomo. Como Conclusión de la tesis, resultado de todo lo anterior es decir, como consecuencia de la integración de un torrente de percepciones e intuiciones en un cuerpo teórico de referencias, deducidas de la existencia de unas claves que estructuran y penetran la esencia del singular modelo estudiado, haciéndolo detectable y seductor, resultan las características de un tipo arquitectónico con entidad propia que ordena, orienta y supedita la realidad y la existencia de esta nueva arquitectura. Una arquitectura nunca antes definida como tal, en el panorama tipológico de la disciplina. Teoría tipológica para una nueva arquitectura, que hemos ido proponiendo a lo largo del trabajo y que es coherente con los diferentes parámetros que se han analizado. Un conjunto edificado que, desde el estudio de sus claves esenciales y de sus invariantes perceptibles, aparece ahora más cercano, más familiar. Tanto que es posible destilar desde este conocimiento cercano e íntimo, una síntesis útil como referencia proyectual y como referencia para las grandes cuestiones que preocupan al discurrir del debate arquitectónico y sus ideas. El debate de la disciplina. El objeto de esta tesis, que consistía en establecer que el conjunto edificado que conocemos como Centro Comercial se constituye en un nuevo tipo en el panorama de las tipologías arquitectónicas, entendido el Centro Comercial en sentido genérico como familia arquitectónica con características propias y específicas que la hacen autónoma y reconocible, queda a nuestro juicio argumentado y justificado. ABSTRACT Within the frame of the built heritage there is a construction that is recognized as Shopping Center. An ensemble understood as an architectural family with its own specific recognizable characteristics. This thesis aims to explain that this building complex constitutes a new type in the panorama of architectural typology. This typology, with its singular identity, is connected to a way of understanding the idea of the model beyond an orthodox conception of the term understood as virtual model. This typology comes from a theoretical structure that we called typological theory, and it serves as yet another tool to reference the study and development design of the architectural spaces. In this first section, the Method, we emotionally explore the opportunities of this thesis. Why this typology has been ignored and the interest this work has in the present moment. An opportunity and an interest explained from an experience of a life dedicated to the world of Shopping Centers. The text then introduces the need for a rigorous knowledge of the Shopping Center’s essence in order to understand its impact in the frame of a new society and a new physical environment. A frame time where the historical mechanisms of association of civic community have given way to other gathering spaces like the Shopping Center, which encourages individualism, but is demanded by a society that relates to them. Spaces that, according to Galbraith, are a result of the intrinsic perversity of the unstoppable movement of the wheel of consumption-production. A society that has turned to worship of material achievement. Worship that provokes the appearance of an increasing value of consumption, according to Koolhaas, the only goal of humanity. Worship that ends in the need to reach certain status levels in the plane of a permanent comparison where the need of possession excites the consumer and gives them the illusion of being special. The product of consumption rises up to consideration of social values, entering a dynamic of marketing values, not only objects, but the desire of the individual remains. The study appears also to clarify the meaning of a space that serves the consumer and its context. A meaning that makes sense with the appearance of the suburbanization, the massive utilization of the car, the increase of living standards and the new role of women in the society after the Second World War, giving rise to the Age of Consumption. A world now determined and controlled by media and unlimited offers, where it’s necessary to place them in the context of the ordinary. An architecture that has to be judged precisely for its relation with this specific contemporary man. This section ends justifying the term ignored that appears in the Title of the Thesis, considering it in relation with the lack of studies structured about the Shopping Center and its architecture, drawing from Pevsner's work, A history of building types, 1976. Finally, the Shopping Center is analyzed with the most critical of thoughts, which considers it as populist architecture. The First Chapter, Precedents, proposes an historical tour of the commercial architecture throughout history. The Document looks to place on record the characteristics of the commercial architecture to set the connection between them and the Mall itself. These correspondences are going to allow us to answer the rhetorical question: is it the architecture of the Shopping Center a subsidiary architecture, or does it have its own personality independent from that of the commercial world? The reason of this historical search, citing Bruno Zevi, is that it is indispensable to establish the relationship between architecture and history, understating that an analysis is only possible when researching for their roots. Moreover, according to Guy de Maupassant, we are sure that architecture has had the privilege, across the centuries, of symbolizing as it were each age(…), through the harmony of lines and the charm of ornamentation all the grace and grandeur of an epoch. This historical reading, inseparable from a consistent design action, begins interpreting the commercial architecture of the Minoan to the 20th Century. Though this analysis of the big commercial itineraries and the study of the Shopping Center itself. A reading where we have found a series of constants that make it possible to draw conclusions from this comparison. The Mall appears to give response to the needs of a consumerist society. Comparing to the calm pace of the evolution of other commercial solutions, it is relevant its fast implantation and evolution in a short period of sixty years. Though via different solutions, the commercial spaces are considered taking into account the public-private relation, the interior-exterior, the inside-out, the closed-opened. Through that, the 19th century galleries and the food markets represent a revolution in functionality, in the machine, the modern management and the relations of the citizen within the city. All of this, the Mall inheritor feels. Likewise, the Department Store is the reflection of another great revolution. Production and commercialization en-mass, communications, the fixed price and increase of the living standard. The Mall reinterprets these situations inserting them in a new model of management. Already in the 20th century Mall and mass technologies of sale, the hypermarket is enthusiastically incorporated into the configuration of this organic scheme, constituting the base of one of the models, the French, that will be highly developed in the European continent. The shop itself constitutes, on the other hand, the key piece that completes the puzzle of the Mall and is in this epoch when it starts taking off as architecture, has an autonomous character. After all this, finally, we come to the big commercial routes, which we propose as metaphor of the shopping. Citing Eugenio Ferrer we can conclude that “If we establish a relation between the space and the capitalism, then we can infer that the spaces of the consumption of masses (ECM) are new configurations with regard to the past (...), but the system that introduces it it is not completely” Now we arrive at this point and with the perspective of time it is necessary to ask us, what do we understand about the Shopping Center? How do we perceive it? The second Chapter approaches the problem of the perception of the Mall and from this it is possible to detect and to identify key drivers that orientate the architectural comprehension of the space. The efficiency of the Shopping Center is its main power of attraction. A world that has ensued from the synthesis of the revolution of consumption and management. An effective cavern-like place of entertainment where the user, the consumer, the postmodern man solves his daily life inside a considered habitat. The hyperbolic place of commercial transaction. An abundance of space, that makes us perceive it as destination of entertainment. An architecture has evolved this efficiency, where the sense of place is at one with the sense of the Shopping. The home of the consumer. The new cathedrals. The cathedral of consumption. The place of peregrination for the fervent consumer. A sacred space that integrates the user in the dominant culture. A temple, where time itself has stopped existing. In this paroxysm, an expression of the Garden of Eden or Paradise itself. A space where the height, the natural daylight and the spatial dimension reinforce the sacred character of a new lay religion. Another common perception is that of a protected area, which leads to metaphors and considerations that suggest the idea of maternal womb, with its weight of erotic meaning, referring to the encounter of the shopper making a purchase. The literature also tells us about its perception as a sterile space capsule, a black hole that absorbs all cultural energy. Likewise, a world simulation where a mock city is perceived at first instance. Consistent with all that shopping triggers inside. A city, a space conceived as a place of dreams, fantasy, where the products have been metamorphosed into fetishes. Entertaining a television, three-dimensional television, where the user acts guided by a drive similar to zapping. A play area where the latest fascination is in the act of buying. Space simulations that unite and transcend creating atmospheres that lead to reverie. A new space replacing the daily space with the lure of safe space in a public context. A hyper-reality space with reality and fantasy, where borders are erased with imaginary episodes of confusion and bewilderment, without distinction. The charm and fascination of a space that reads like magic. The magic of a space which is defined as stage extravaganza, the large theatre, the consumer surveys in the fine control mode in which you visit a national monument. The shopping center has to survive the times to be a testimony of our time. An icon, a symbol that conveys a message, the message reads ‘consumer’. In short, a Shopping Center is a mix of unprecedented insights that speak of a widespread phenomenon of bewilderment. Its space and the reactions of contemporary man unfold in it like a fish in water. What are the key aspects which allow us to recognize the essential quality of a shopping center in this concurrence of perplexities? First, we want to record a service function of space much deeper than the immediately obvious, i.e. a purchase occurs. A building that appears to be involved with the environment and its people from the hand of the unexpected circumstances; surprise and attention. And that, in turn, also involves the visitor beyond the purchase. This dedication to service closely links the mall with its architectural nature. It is not the function of a lifeless machine. It is a feature that suggests unsuspected perceptions linked to the purchase, which speaks of an organism that lives and breathes in unison with the visitor. Second, in addition to the vocation of service-oriented desire for consumption, the Mall environment serves a particular society - The consumer society. A new society which relates to building a sense of community developed to the level of their desires. This community also constitutes the most powerful asset to the success of the daily life of the Shopping Center. Third, we emphasize that the so called economy of the experience is combined with the consumer zeal of a company that is identified by the Shopping Center. It connects to form a holistic and planned experience. This experience takes shape in the entity that ensues from the premeditated association and synergy, in the sense of a collaboration for success. A set of concrete commercial and independent establishments, take part in the spatial and commercial adventure that is the Mall and they are the instigators of the consumption. This holistic behavior finds culmination in the amplification of a claim that becomes unitary, like an immense force that leads to an increased profitability to all the levels. Consummation is a reference of one human being overturned in an architecture assimilated into a legitimate, emotional design with stability. A holistic quality is born of the essence of the building - and by virtue of the Conditions of Alexander, Christopher Alexander, determines the system condition of the Shopping Center. Fourth, we propose to establish what character the Mall will form when joined with the concept of its typology. This is going to allow the architectural work to be formed. As a result of the holistic structure that we see, the Mall is perceived as a system whose parts have their own function, justifying their existence in the ecosystem. Across a gestalt there is a powerful capacity of communication between the system and its context. We visualize on the one that stands out our building, turning both, Center and environment, in accomplices of a few special relations who complement each other in his realities. This relationship within a complex and diverse environment gives the Mall a range of unique spatial perceptions, the result of disparate experiences, which because of its root origin of gestalt, are integrated into a unified and coordinated manner fully intelligible and organized. This is the final formal essence of the Shopping Center. We can conclude here that the Mall as architecture is a structured system and should be perceived as a unit both from a physical and spatial perspective as this is the essence of its architecture. Fifth, the Mall as a system. A system which is being supported by a broad theoretical corpus, the General Systems Theory, which offers sufficient methodology to descend into consideration and give an enlightened conclusion on the overall understanding of the Mall. Consideration of the Mall as a system is a result of its holistic structure. The whole does not behave like any of the parties and they do not behave the way they used to before belonging to the whole, because they inhibit many of their qualities to their advantage. It arises the need for an ongoing dialogue between marketing processes and its translation into the physical world, the design. The system generates multiple perceptions to be integrated into a body which is to be understood as unitary. As a system, the Mall is inserted into the contemporary paradigm, creating dual realities that are not exclusive and are reactions of uncertainty that the system be properly designed at all levels, faced with their ability to self-regulate. Likewise, considering the visitor, the customer, like the quantum spectator who interacts with the system permanently. Moreover, a complex system confronts us with the Commercial mix, the effective location of parts in order to relate to the body and its importance in the architecture we are conceiving. Unpredictable architecture, which stands as the challenge of the operation and the designer. Design that becomes the tool of the system to create success for the overall operation. The discussion of the styling is merely the result of analysis that also seeks the success of the system, i.e. the styling should send the right message for the environment to ensure its survival. Sixth, the idea of negotiation as an architecture project, a mechanism inherent to the status of the proposed system. The project solution is never evident at the Shopping Center because of the unpredictability of the process itself. It can only be the fruit of the commitment of all stakeholders to achieve the objective of the operation. This is achieved from the balance of interests, of commercial and design. A commitment to negotiation and a negotiation linked to coordination. The pursuit of stability is key, as instability is always present and constantly requires strategies to build the object you are configuring. Seventh, proposes space-time itself as a circumstance that determines and structures the perception of the Mall in a singular way. We introduce concepts as chronotope and paradox to help us place the relationship between time and space within the Mall in the context of shopping. A consequence of the parallel flow of historical time - the time outside - and the time inside the Mall, the big shopping center formula is precisely that of having the feeling of timelessness in the space. The social triumph of the mall is the ability to resolve in space and in time all postmodern paradoxes and, beyond that, of contemporary man, condensing into a small space and time an enormous amount of cultural symbols, often contradictory, but they attract the practice of consumerism. Eighth, global level. Globalization which doesn’t ignore the local level. Architecture that is inserted into the dynamics of a global economy, reflects the contradictions that it imposes, mainly in the processes of inclusion and exclusion. Inclusion and exclusion affect the debate of the local level, which the Mall must incorporate as an unavoidable tool of recognition. The eight fundamental principles, when applied as a whole, confirm that the built heritage, which corresponds to the general Mall idea, can be presented as a cohesive conceptual whole. This becomes part of a coherent architectural family, whose functional structures are able to be established. The Third chapter presents in a detailed way the figure of the architect Victor Gruen, recognized as the creator of the modern Mall. Studying his professional experience, it is shown how the different keys analyzed in previous chapters are appearing in a natural way. "Victor Gruen may well have been the most influential architect of the twentieth century." Malcolm Gladwell. The Terrazo Jungle. Fifty Years Ago, The Mall Was Born. America Never Would Be The Same. 2004. In The New Yorker. He was a complex, troubled man and the paradoxes along his career were notable. Nevertheless, always he appeared as a straight man. Garret Eckbo, the recognized landscape painter and collaborator of Gruen was astonished how Gruen had been capable of combining comity and humanity in this career of rates, into that the American commercialization turned, Johnson, in 1962, weighting many Gruen's skills demonstrated that he was not sure if anyone of them, architects artists, had been capable of doing what Gruen did. He goes beyond just the creation of a beautiful building. In playing on people and suggesting what they ought to do, he is a master. (…) his architecture is clean - hardly architecture, no flights of fancy. But when you get hold of its complexity, you've got something beyond the design... You can't say there's someone like him. Architecture is lucky to have him as an architect." Philip Johnson. Article in Fortune Review. 1962. The Document of the thesis closes with Gruen's vision of realizing a tour through the different chapters of his essential book, Shopping towns USA: The Planning of Shopping Centers. It’s mere index turns out to be a monument to the process of the gestation of the Mall. The book, simply acted in its basic structure as a silent witness, as the canonical reference for the contemporary Malls. The Fourth Chapter of the Document of the thesis is a recapitulation of the previous work, which synthesizes the concepts of function and style related to the Shopping Center, and clearly defines how they are defined so we can conclude that we have found an architectural new type in the panorama of the architectural discipline. Therefore, the Conclusion of the thesis integrates this development in a theoretical body of references that relate to an architectural specific and particular type, which receives the singularity of the Shopping Center as an architectural independent phenomenon as it has tried to demonstrate from the beginning of the work. To conclude, as a result of the integrative process and the development of the theoretical body of references, the essential characteristics of the order and concept of the architectural typology form the existence of a new architecture; architecture never before defined as such, in the theoretical typology of the discipline. A theoretical typology for a new architecture is proposed throughout the discussed research and forms a conclusion of the different parameters that have been analysed. As a building complex, from the study of the essential characteristics and of the perceptible constants, the typology is more clearly defined and thus, becomes a useful tool and precedent for the consideration of the discipline. The thesis then justifies how the building complex known as Shopping Center constitutes a new type of architectural typology.

Colaboração e cooperação entre sistemas produtivos dispersos de empresas virtuais.

No mercado global e digital, as empresas são desafiadas a encontrar caminhos inovadores para atender o aumento da pressão -competitiva. A competição é uma das formas de interação das organizações, além da colaboração e da cooperação. A cooperação e a colaboração apresentam formas de produzir conjuntamente aumentando o potencial de atendimento das empresas. Os desafios mais encontrados no mercado são: reduzir os custos, sempre assegurar qualidade e personalizar os produtos e serviços. Um fenômeno de negócios comum hoje é a terceirização da manufatura e da logística para fornecedores domésticos e estrangeiros e provedores de serviços. Essa terceirização provoca, intrinsecamente, um espalhamento geográfico da produção em novos centros que oferecem vantagens nos recursos energéticos, matérias primas e centros de produção de conhecimento. Essa terceirização pode ser realizada também nas formas de colaboração e cooperação. Para isso, as empresas necessitam estabelecer uma forma de confiança entre si. No conceito de empresa virtual, a confiança é amplamente discutida para atingir uma colaboração e/ou cooperação entre empresas. O objetivo deste trabalho é propor e modelar uma ferramenta que atenda as necessidades das empresas para colaboração e/ou cooperação entre elas, considerando suas necessidades de confiança. As empresas aqui são vistas como sistemas produtivos, com suas camadas de gerenciamento de negócios, de acordo com o padrão ANSI/ISA 95. Além disso, um tipo de interpretação da rede de Petri, chamada de rede de Petri produtiva é introduzida como ferramenta para descrever o processo produtivo realizado pelas empresas na forma de workflow. A modelagem dessa arquitetura do sistema produtivo utiliza técnicas de sistemas distribuídos, como a arquitetura orientada a serviços. Além disso, um dos enfoques é das necessidades para o desenvolvimento de novos produtos, que envolve o desafio de personalização. Testes foram realizados para avaliar a proposta de workflow com pessoas de diferentes níveis de conhecimento sobre os processos, sejam de manufatura, sejam de outras áreas. Já a arquitetura proposta foi submetida a um estudo analítico das hipóteses levantadas no ambiente colaborativo.

Robotic control systems based on bioinspired multi-agent systems: application of the principles of neuroscience to robotics

Robotics is a field that presents a large number of problems because it depends on a large number of disciplines, devices, technologies and tasks. Its expansion from perfectly controlled industrial environments toward open and dynamic environment presents a many new challenges, such as robots household robots or professional robots. To facilitate the rapid development of robotic systems, low cost, reusability of code, its medium and long term maintainability and robustness are required novel approaches to provide generic models and software systems who develop paradigms capable of solving these problems. For this purpose, in this paper we propose a model based on multi-agent systems inspired by the human nervous system able to transfer the control characteristics of the biological system and able to take advantage of the best properties of distributed software systems.

Multi-agent system for control of robots inspired on the distributed activity and hormonal regulation of humans

Robotics is an emerging field with great activity. Robotics is a field that presents several problems because it depends on a large number of disciplines, technologies, devices and tasks. Its expansion from perfectly controlled industrial environments toward open and dynamic environment presents a many new challenges. New uses are, for example, household robots or professional robots. To facilitate the low cost, rapid development of robotic systems, reusability of code, its medium and long term maintainability and robustness are required novel approaches to provide generic models and software systems who develop paradigms capable of solving these problems. For this purpose, in this paper we propose a model based on multi-agent systems inspired by the human nervous system able to transfer the control characteristics of the biological system and able to take advantage of the best properties of distributed software systems. Specifically, we model the decentralized activity and hormonal variation.

Data normalization and integration in robotic systems using web services technologies

The robotics is one of the most active areas. We also need to join a large number of disciplines to create robots. With these premises, one problem is the management of information from multiple heterogeneous sources. Each component, hardware or software, produces data with different nature: temporal frequencies, processing needs, size, type, etc. Nowadays, technologies and software engineering paradigms such as service-oriented architectures are applied to solve this problem in other areas. This paper proposes the use of these technologies to implement a robotic control system based on services. This type of system will allow integration and collaborative work of different elements that make up a robotic system.

A formal framework for modelling complex network management systems

Society today is completely dependent on computer networks, the Internet and distributed systems, which place at our disposal the necessary services to perform our daily tasks. Subconsciously, we rely increasingly on network management systems. These systems allow us to, in general, maintain, manage, configure, scale, adapt, modify, edit, protect, and enhance the main distributed systems. Their role is secondary and is unknown and transparent to the users. They provide the necessary support to maintain the distributed systems whose services we use every day. If we do not consider network management systems during the development stage of distributed systems, then there could be serious consequences or even total failures in the development of the distributed system. It is necessary, therefore, to consider the management of the systems within the design of the distributed systems and to systematise their design to minimise the impact of network management in distributed systems projects. In this paper, we present a framework that allows the design of network management systems systematically. To accomplish this goal, formal modelling tools are used for modelling different views sequentially proposed of the same problem. These views cover all the aspects that are involved in the system; based on process definitions for identifying responsible and defining the involved agents to propose the deployment in a distributed architecture that is both feasible and appropriate.

SOA-Based Model for Value-Added ITS Services Delivery

Integration is currently a key factor in intelligent transportation systems (ITS), especially because of the ever increasing service demands originating from the ITS industry and ITS users. The current ITS landscape is made up of multiple technologies that are tightly coupled, and its interoperability is extremely low, which limits ITS services generation. Given this fact, novel information technologies (IT) based on the service-oriented architecture (SOA) paradigm have begun to introduce new ways to address this problem. The SOA paradigm allows the construction of loosely coupled distributed systems that can help to integrate the heterogeneous systems that are part of ITS. In this paper, we focus on developing an SOA-based model for integrating information technologies (IT) into ITS to achieve ITS service delivery. To develop our model, the ITS technologies and services involved were identified, catalogued, and decoupled. In doing so, we applied our SOA-based model to integrate all of the ITS technologies and services, ranging from the lowest-level technical components, such as roadside unit as a service (RS S), to the most abstract ITS services that will be offered to ITS users (value-added services). To validate our model, a functionality case study that included all of the components of our model was designed.

A Construction Management Framework for Mass Customisation in Traditional Construction

A Mass Customisation model is discussed as a competitive positioning strategy in the marketplace adding value to the customer’s end-use. It includes the user as part of the construction process responding to the customer’s demands and wishes. To the present day, almost all proposals for Mass Customisation have been focused on the design phase and single family houses. The reality is that the processes carried out in the work execution are so inefficient that the costs of the Mass Customisation models are assumed by the customer and they do not offer solutions that support the change management. Furthermore, this inefficiency often makes Mass Customisation unfeasible in terms of deadlines and site management. Therefore, the present proposal focuses on achieving the paradigm of Mass Customisation in the traditional residential construction complementary to the existing proposals in the design phase. All this through the proposal of a framework for the integral management in the work execution, which will address change management introduced by the users offering an efficient and productive model that reduces costs in the process. This model will focus on the synergy between different strategies, techniques and technologies currently used in the construction management (such as Lean Construction or Six Sigma), together with, other strategies and technologies that have proven to be valid solutions in other fields (such as Business Process Management, Service Oriented Architecture, etc.).

Conceptual Modelling of Complex Network Management Systems

Society, as we know it today, is completely dependent on computer networks, Internet and distributed systems, which place at our disposal the necessary services to perform our daily tasks. Moreover, and unconsciously, all services and distributed systems require network management systems. These systems allow us to, in general, maintain, manage, configure, scale, adapt, modify, edit, protect or improve the main distributed systems. Their role is secondary and is unknown and transparent to the users. They provide the necessary support to maintain the distributed systems whose services we use every day. If we don’t consider network management systems during the development stage of main distributed systems, then there could be serious consequences or even total failures in the development of the distributed systems. It is necessary, therefore, to consider the management of the systems within the design of distributed systems and systematize their conception to minimize the impact of the management of networks within the project of distributed systems. In this paper, we present a formalization method of the conceptual modelling for design of a network management system through the use of formal modelling tools, thus allowing from the definition of processes to identify those responsible for these. Finally we will propose a use case to design a conceptual model intrusion detection system in network.

Flexible processing architecture for maintaining QoS in embedded systems applications

Comunicación presentada en las V Jornadas de Computación Empotrada, Valladolid, 17-19 Septiembre 2014

Web services based state of the environment reporting

The Environmental Sciences Division within Queensland Environmental Protection Agency works to monitor, assess and model the condition of the environment. The Division has as a legislative responsibility to produce a whole-of-government report every four years dealing environmental conditions and trends in a ”State of the Environment report” (SoE)[1][2][3]. State of Environment Web Service Reporting System is a supplementary web service based SoE reporting tool, which aims to deliver accurate, timely and accessible information on the condition of the environment through web services via Internet [4][5]. This prototype provides a scientific assessment of environmental conditions for a set of environmental indicators. It contains text descriptions and tables, charts and maps with spatiotemporal dimensions to show the impact of certain environmental indicators on our environment. This prototype is a template based indicator system, to which the administrator may add new sql queries for new indicator services without changing the architecture and codes of this template. The benefits are brought through a service-oriented architecture which provides an online query service with seamless integration. In addition, since it uses web service architecture, each individual component within the application can be implemented by using different programming languages and in different operating systems. Although the services showed in this demo are built upon two datasets of regional ecosystem and protection area of Queensland, it will be possible to report on the condition of water, air, land, coastal zones, energy resources, biodiversity, human settlements and natural culture heritage on the fly as well. Figure 1 shows the architecture of the prototype. In the next section, I will discuss the research tasks in the prototype.

Human resource management and organizational performance:evidence from the retail banking sector

Underpinned by the resource-based view (RBV), social exchange theory (SET), and a theory of intrinsic motivation (empowerment), I proposed and tested a multi-level model that simultaneously examines the intermediate linkages or mechanisms through which HPWS impact individual and organizational performance. First and underpinned by RBV, I examined at the unit level, collective human capital and competitive advantage as path-ways through which the use of HPWS influences – branch market performance. Second and-, underpinned by social exchange (perceived organizational support) and intrinsic motivation (psychological empowerment) theories, I examined cross and individual level mechanisms through which experienced HPWS may influence employee performance. I tested the propositions of this study with multisource data obtained from junior and senior customer contact employees, and managers of 37 branches of two banks in Ghana. Results of the Structural Equation Modeling (SEM) analysis revealed that (i) collective human capital partially mediated the relationship between management-rated HPWS and competitive advantage, while competitive advantage completely mediated the influence of human capital on branch market performance. Consequently, management-rated HPWS influenced branch market performance indirectly through collective human capital and competitive advantage. Additionally, results of hierarchical linear modeling (HLM) tests of the cross-level influences on the motivational implications of HPWS revealed that (i) management-rated HPWS influenced experienced HPWS; (ii) perceived organizational support (POS) and psychological empowerment fully mediated the influence of experienced HPWS on service-oriented organizational citizenship behaviour (OCB), and; (iii) service-oriented OCB mediated the influence of psychological empowerment and POS on service quality and task performance. I discuss the theoretical and practical implications of these findings.

Responsive systems:an introduction

This paper introduces responsive systems: systems that are real-time, event-based, or time-dependent. There are a number of trends that are accelerating the adoption of responsive systems: timeliness requirements for business information systems are becoming more prevalent, embedded systems are increasingly integrated into soft real-time command-and-control systems, improved message-oriented middleware is facilitating growth in event-processing applications, and advances in service-oriented and component-based techniques are lowering the costs of developing and deploying responsive applications. The use of responsive systems is illustrated here in two application areas: the defense industry and online gaming. The papers in this special issue of the IBM Systems Journal are then introduced. The paper concludes with a discussion of the key remaining challenges in this area and ideas for further work.