Optimal control theory for a unitary operation under dissipative evolution

We show that optimizing a quantum gate for an open quantum system requires the time evolution of only three states irrespective of the dimension of Hilbert space. This represents a significant reduction in computational resources compared to the complete basis of Liouville space that is commonly believed necessary for this task. The reduction is based on two observations: the target is not a general dynamical map but a unitary operation; and the time evolution of two properly chosen states is sufficient to distinguish any two unitaries. We illustrate gate optimization employing a reduced set of states for a controlled phasegate with trapped atoms as qubit carriers and a iSWAP gate with superconducting qubits.

Optimizing Robust Quantum Gates in Open Quantum Systems

We are currently at the cusp of a revolution in quantum technology that relies not just on the passive use of quantum effects, but on their active control. At the forefront of this revolution is the implementation of a quantum computer. Encoding information in quantum states as “qubits” allows to use entanglement and quantum superposition to perform calculations that are infeasible on classical computers. The fundamental challenge in the realization of quantum computers is to avoid decoherence – the loss of quantum properties – due to unwanted interaction with the environment. This thesis addresses the problem of implementing entangling two-qubit quantum gates that are robust with respect to both decoherence and classical noise. It covers three aspects: the use of efficient numerical tools for the simulation and optimal control of open and closed quantum systems, the role of advanced optimization functionals in facilitating robustness, and the application of these techniques to two of the leading implementations of quantum computation, trapped atoms and superconducting circuits. After a review of the theoretical and numerical foundations, the central part of the thesis starts with the idea of using ensemble optimization to achieve robustness with respect to both classical fluctuations in the system parameters, and decoherence. For the example of a controlled phasegate implemented with trapped Rydberg atoms, this approach is demonstrated to yield a gate that is at least one order of magnitude more robust than the best known analytic scheme. Moreover this robustness is maintained even for gate durations significantly shorter than those obtained in the analytic scheme. Superconducting circuits are a particularly promising architecture for the implementation of a quantum computer. Their flexibility is demonstrated by performing optimizations for both diagonal and non-diagonal quantum gates. In order to achieve robustness with respect to decoherence, it is essential to implement quantum gates in the shortest possible amount of time. This may be facilitated by using an optimization functional that targets an arbitrary perfect entangler, based on a geometric theory of two-qubit gates. For the example of superconducting qubits, it is shown that this approach leads to significantly shorter gate durations, higher fidelities, and faster convergence than the optimization towards specific two-qubit gates. Performing optimization in Liouville space in order to properly take into account decoherence poses significant numerical challenges, as the dimension scales quadratically compared to Hilbert space. However, it can be shown that for a unitary target, the optimization only requires propagation of at most three states, instead of a full basis of Liouville space. Both for the example of trapped Rydberg atoms, and for superconducting qubits, the successful optimization of quantum gates is demonstrated, at a significantly reduced numerical cost than was previously thought possible. Together, the results of this thesis point towards a comprehensive framework for the optimization of robust quantum gates, paving the way for the future realization of quantum computers.

Efficient Characterisation and Optimal Control of Open Quantum Systems - Mathematical Foundations and Physical Applications

Since no physical system can ever be completely isolated from its environment, the study of open quantum systems is pivotal to reliably and accurately control complex quantum systems. In practice, reliability of the control field needs to be confirmed via certification of the target evolution while accuracy requires the derivation of high-fidelity control schemes in the presence of decoherence. In the first part of this thesis an algebraic framework is presented that allows to determine the minimal requirements on the unique characterisation of arbitrary unitary gates in open quantum systems, independent on the particular physical implementation of the employed quantum device. To this end, a set of theorems is devised that can be used to assess whether a given set of input states on a quantum channel is sufficient to judge whether a desired unitary gate is realised. This allows to determine the minimal input for such a task, which proves to be, quite remarkably, independent of system size. These results allow to elucidate the fundamental limits regarding certification and tomography of open quantum systems. The combination of these insights with state-of-the-art Monte Carlo process certification techniques permits a significant improvement of the scaling when certifying arbitrary unitary gates. This improvement is not only restricted to quantum information devices where the basic information carrier is the qubit but it also extends to systems where the fundamental informational entities can be of arbitary dimensionality, the so-called qudits. The second part of this thesis concerns the impact of these findings from the point of view of Optimal Control Theory (OCT). OCT for quantum systems utilises concepts from engineering such as feedback and optimisation to engineer constructive and destructive interferences in order to steer a physical process in a desired direction. It turns out that the aforementioned mathematical findings allow to deduce novel optimisation functionals that significantly reduce not only the required memory for numerical control algorithms but also the total CPU time required to obtain a certain fidelity for the optimised process. The thesis concludes by discussing two problems of fundamental interest in quantum information processing from the point of view of optimal control - the preparation of pure states and the implementation of unitary gates in open quantum systems. For both cases specific physical examples are considered: for the former the vibrational cooling of molecules via optical pumping and for the latter a superconducting phase qudit implementation. In particular, it is illustrated how features of the environment can be exploited to reach the desired targets.

Hybrid optimization schemes for quantum control

Optimal control theory is a powerful tool for solving control problems in quantum mechanics, ranging from the control of chemical reactions to the implementation of gates in a quantum computer. Gradient-based optimization methods are able to find high fidelity controls, but require considerable numerical effort and often yield highly complex solutions. We propose here to employ a two-stage optimization scheme to significantly speed up convergence and achieve simpler controls. The control is initially parametrized using only a few free parameters, such that optimization in this pruned search space can be performed with a simplex method. The result, considered now simply as an arbitrary function on a time grid, is the starting point for further optimization with a gradient-based method that can quickly converge to high fidelities. We illustrate the success of this hybrid technique by optimizing a geometric phase gate for two superconducting transmon qubits coupled with a shared transmission line resonator, showing that a combination of Nelder-Mead simplex and Krotov’s method yields considerably better results than either one of the two methods alone.

Desenvolupament computacional de la semblança molecular quàntica

La present Tesi Doctoral, titulada desenvolupament computacional de la semblança molecular quàntica, tracta, fonamentalment, els aspectes de càlcul de mesures de semblança basades en la comparació de funcions de densitat electrònica.El primer capítol, Semblança quàntica, és introductori. S'hi descriuen les funcions de densitat de probabilitat electrònica i llur significança en el marc de la mecànica quàntica. Se n'expliciten els aspectes essencials i les condicions matemàtiques a satisfer, cara a una millor comprensió dels models de densitat electrònica que es proposen. Hom presenta les densitats electròniques, mencionant els teoremes de Hohenberg i Kohn i esquematitzant la teoria de Bader, com magnituds fonamentals en la descripció de les molècules i en la comprensió de llurs propietats.En el capítol Models de densitats electròniques moleculars es presenten procediments computacionals originals per l'ajust de funcions densitat a models expandits en termes de gaussianes 1s centrades en els nuclis. Les restriccions físico-matemàtiques associades a les distribucions de probabilitat s'introdueixen de manera rigorosa, en el procediment anomenat Atomic Shell Approximation (ASA). Aquest procediment, implementat en el programa ASAC, parteix d'un espai funcional quasi complert, d'on se seleccionen variacionalment les funcions o capes de l'expansió, d'acord als requisits de no negativitat. La qualitat d'aquestes densitats i de les mesures de semblança derivades es verifica abastament. Aquest model ASA s'estén a representacions dinàmiques, físicament més acurades, en quant que afectades per les vibracions nuclears, cara a una exploració de l'efecte de l'esmorteïment dels pics nuclears en les mesures de semblança molecular. La comparació de les densitats dinàmiques respecte les estàtiques evidencia un reordenament en les densitats dinàmiques, d'acord al que constituiria una manifestació del Principi quàntic de Le Chatelier. El procediment ASA, explícitament consistent amb les condicions de N-representabilitat, s'aplica també a la determinació directe de densitats electròniques hidrogenoides, en un context de teoria del funcional de la densitat.El capítol Maximització global de la funció de semblança presenta algorismes originals per la determinació de la màxima sobreposició de les densitats electròniques moleculars. Les mesures de semblança molecular quàntica s'identifiquen amb el màxim solapament, de manera es mesuri la distància entre les molècules, independentment dels sistemes de referència on es defineixen les densitats electròniques. Partint de la solució global en el límit de densitats infinitament compactades en els nuclis, es proposen tres nivells de aproximació per l'exploració sistemàtica, no estocàstica, de la funció de semblança, possibilitant la identificació eficient del màxim global, així com també dels diferents màxims locals. Es proposa també una parametrització original de les integrals de recobriment a través d'ajustos a funcions lorentzianes, en quant que tècnica d'acceleració computacional. En la pràctica de les relacions estructura-activitat, aquests avenços possibiliten la implementació eficient de mesures de semblança quantitatives, i, paral·lelament, proporcionen una metodologia totalment automàtica d'alineació molecular. El capítol Semblances d'àtoms en molècules descriu un algorisme de comparació dels àtoms de Bader, o regions tridimensionals delimitades per superfícies de flux zero de la funció de densitat electrònica. El caràcter quantitatiu d'aquestes semblances possibilita la mesura rigorosa de la noció química de transferibilitat d'àtoms i grups funcionals. Les superfícies de flux zero i els algorismes d'integració usats han estat publicats recentment i constitueixen l'aproximació més acurada pel càlcul de les propietats atòmiques. Finalment, en el capítol Semblances en estructures cristal·lines hom proposa una definició original de semblança, específica per la comparació dels conceptes de suavitat o softness en la distribució de fonons associats a l'estructura cristal·lina. Aquests conceptes apareixen en estudis de superconductivitat a causa de la influència de les interaccions electró-fonó en les temperatures de transició a l'estat superconductor. En aplicar-se aquesta metodologia a l'anàlisi de sals de BEDT-TTF, s'evidencien correlacions estructurals entre sals superconductores i no superconductores, en consonància amb les hipòtesis apuntades a la literatura sobre la rellevància de determinades interaccions.Conclouen aquesta tesi un apèndix que conté el programa ASAC, implementació de l'algorisme ASA, i un capítol final amb referències bibliogràfiques.

Temperature Dependence of the Intergranular Critical Current Density in Uniaxially Pressed Bi(1.65)Pb(0.35)Sr(2)Ca(2)Cu(3)O(10+delta) Samples

We have studied the normal and superconducting transport properties of Bi(1.65)Pb(0.35)Sr(2)Ca(2)Cu(3)O(10+delta) (Bi-2223) ceramic samples. Four samples, from the same batch, were prepared by the solid-state reaction method and pressed uniaxially at different compacting pressures, ranging from 90 to 250 MPa before the last heat treatment. From the temperature dependence of the electrical resistivity, combined with current conduction models for cuprates, we were able to separate contributions arising from both the grain misalignment and microstructural defects. The behavior of the critical current density as a function of temperature at zero applied magnetic field, J (c) (T), was fitted to the relationship J (c) (T)ae(1-T/T (c) ) (n) , with na parts per thousand 2 in all samples. We have also investigated the behavior of the product J (c) rho (sr) , where rho (sr) is the specific resistance of the grain-boundary. The results were interpreted by considering the relation between these parameters and the grain-boundary angle, theta, with increasing the uniaxial compacting pressure. We have found that the above type of mechanical deformation improves the alignment of the grains. Consequently the samples exhibit an enhance in the intergranular properties, resulting in a decrease of the specific resistance of the grain-boundary and an increase in the critical current density.

Intergranular properties of uniaxially pressed YBa(2)Cu(3)O(7-delta) ceramic samples

We performed measurements of electrical resistivity as a function of temperature, rho(T), in polycrystalline samples of YBa(2)Cu(3)O(7-delta) (Y-123) subjected to different uniaxial compacting pressures. We observed by using X-ray diffractometry that samples have a very similar composition. Most of the identified peaks are related to the superconducting Y-123 phase. Also, from the X-ray diffraction patterns performed, in powder and pellet samples, we estimated the Lotgering factor along the (00l) direction, F((00l)). The results indicate that F((00l)) increases from 0.13 to 0.16. From electrical resistivity measurements as a function of temperature, we were able to separate contributions arising from both the grain misalignment and microstructural defects. We found appreciable degradation in the normal-state transport properties of samples with an increase in uniaxial compacting pressure. It seems that this type of behavior is associated with an increase in the influence of microstructural defects at the intergranular level. The experimental results are analyzed in the framework of a current conduction model of granular samples.

Magnetic Susceptibility Measurements at Ultra-low Temperatures

We report the design and operation of a device for ac magnetic susceptibility measurements that can operate down to 1 mK. The device, a modification of the standard mutual inductance bridge, is designed with detailed consideration of the thermalization and optimization of each element. First, in order to reduce local heating, the primary coil is made with superconducting wire. Second, a low-temperature transformer which is thermally anchored to the mixing chamber of a dilution refrigerator, is used to match the output of the secondary coil to a high-sensitivity bridge detector. The careful thermal anchoring of the secondary coil and the matching transformer is required to reduce the overall noise temperature and maximize sensitivity. The sample is immersed in liquid (3)He to minimize the Kapitza thermal resistance. The magnetic susceptibility of several magnetic compounds, such as the well-known spin gap compound NiCl(2)-4SC(NH(2))(2) and other powdered samples, have been successfully measured to temperatures well below 10 mK.

Low-energy nuclear reactions with double-solenoid based radioactive nuclear beam

The University of Notre Dame, USA (Becchetti et al, Nucl. Instrum. Metho ds Res. A505, 377 (2003)) and later the University of Sao Paulo, Brazil (Lichtenthaler et al, Eur. Phys. J. A25, S-01, 733 (2005)) adopted a system based on superconducting solenoids to produce low-energy radioactive nuclear beams. In these systems the solenoids act as thick lenses to collect, select, and focus the secondary beam into a scattering chamb er. Many experiments with radioactive light particle beams (RNB) such as (6)He, (7)Be, (8)Li, (8)B have been performed at these two facilities. These low-energy RNB have been used to investigate low-energy reactions such as elastic scattering, transfer and breakup, providing useful information on the structure of light nuclei near the drip line and on astrophysics. Total reaction cross-sections, derived from elastic scattering analysis, have also been investigated for light system as a function of energy and the role of breakup of weakly bound or exotic nuclei is discussed.

Scientific program of the Radioactive Ion Beams Facility in Brasil (RIBRAS)

The RIBRAS facility (Radioactive Ion Beams in Brasil) is installed in connection with the 8MV Pelletron tandem of the University of Sao Paulo Physics Institute. It consists of two superconducting solenoids which focalize light radioactive secondary beams of low energy, produced by transfer reactions. Recent experimental results include the elastic scattering and transfer reactions of (6)He halo nucleus on (9)Be, (27)Al, (51)V and (120)Sn targets. The elastic scattering and transfer of (8)Li and (7)Be on several targets is also being studied. The transfer reaction (8)Li(p,alpha)(5)He of astrophysical interest was also Studied in the E(cm)=0.2-2.5 MeV energy range.

Estudo experimental e teórico das propriedades magnéticas e supercondutoras dos compostos borocarbetos da série Y(Ni 1-x Mn x) 2 B2 C com x = 0,0, 0,01, 0,025, 0,05, 0,10 e 0,15

Apresentamos neste trabalho os resultados de um estudo experimental e teórico dos compostos borocarbetos supercondutores da série Y(Ni1-xMnx)2B2C com x = 0; 0,01; 0,025; 0,05; 0,10; 0,15. A principal motivação para este trabalho foi investigar a estrutura eletrônica e a possível formação do momento magnético sobre os átomos de impureza de Mn nos compostos Y(Ni1- xMnx)2B2C. O aparecimento do momento magnético localizado no sítio da impureza possibilitou estudar a influência do Mn sobre o mecanismo de quebra de pares supercondutores e sobre as propriedades magnéticas do composto. Os borocarbetos são compostos de estrutura cristalina tetragonal de corpo centrado e altamente anisotrópicos (c/a~3). São intermetálicos de alta temperatura crítica supercondutora Tc, com forte acoplamento elétron-fonon. Em alguns casos podem apresentar ordem magnética, supercondutividade e também coexistência ou competição energética entre ambos. As medidas de transporte eletrônico, em função da temperatura, foram feitas utilizando-se um detector síncroton baseado na técnica de quatro pontos operando na faixa de 4,2K até 300K. Essas medidas possibilitaram o estudo das propriedades relacionadas ao transporte eletrônico na fase supercondutora. Na fase normal, extraiu-se a dependência em energia da função espectral de fonons α² F (ω) para alguns compostos da série estudada. As medidas magnéticas em função da temperatura e do campo magnético foram feitas utilizando-se um SQUID (Superconducting Quantun Interference Device – Quantun Design Model MPMS XL). Tais medidas permitiram a caracterização das propriedades magnéticas de nossas amostras. Em particular determinou-se o valor, em regime de saturação, do momento magnético associado ao sítio cristalino do Mn. Foram determinadas também as correntes críticas supercondutoras usando o Modelo de estado crítico de Bean e a variação da temperatura crítica supercondutora (Tc) com a mudança do campo externo aplicado. As medidas magnéticas permitiram a obtenção do diagrama que relaciona o campo crítico inferior (HC1) e a temperatura, variando-se a concentração do átomo dopante de manganês. Foi feito um esforço teórico no sentido de interpretar os resultados experimentais. Para isso foram usados três modelos: O modelo de estado crítico de Bean já citado acima e um modelo baseado na fórmula de Ziman usando uma aproximação para a função espectral de fonons para descrever a resistividade no regime de alta temperatura. Além disto, usou-se o modelo de duas sub-redes para a descrição do momento magnético das impurezas de Mn, em função da concentração, na série Y(Ni ) ( 2 ω α F 1-xMnx)2B2C.

Bianisotropia uniaxial em estruturas irradiantes com multicamadas e supercondutores

This work presents a theoretical and numerical analysis of parameters of a rectangular microstrip antenna with bianisotropic substrate, and including simultaneously the superconducting patch. The full-wave Transverse Transmission Line - TTL method, is used to characterize these antennas. The bianisotropic substrate is characterized by the permittivity and permeability tensors, and the TTL gives the general equations of the electromagnetic fields of the antennas. The BCS theory and the two fluids model are applied to superconductors in these antennas with bianisotropic for first time. The inclusion of superconducting patch is made using the complex resistive boundary condition. The resonance complex frequency is then obtained. Are simulated some parameters of antennas in order to reduce the physical size, and increase the its bandwidth. The numerical results are presented through of graphs. The theoretical and computational analysis these works are precise and concise. Conclusions and suggestions for future works are presented

Aplicações de arranjos de antenas de microfita com patch supercondutor

This work has as main objective the study of arrays of microstrip antennas with superconductor rectangular patch. The phases and the radiation patterns are analyzed. A study of the main theories is presented that explain the microscopic and macroscopic phenomena of superconductivity. The BCS, London equations and the Two Fluid Model, are theories used in the applications of superconductors, at the microstrip antennas and antennas arrays. Phase Arrangements will be analyzed in linear and planar configurations. The arrangement factors of these configurations are obtained, and the phase criteria and the spacing between the elements, are examined in order to minimize losses in the superconductor, compared with normal conductors. The new rectangular patch antenna, consist of a superconducting material, with the critical temperature of 233 K, whose formula is Tl5Ba4Ca2Cu9Oy, is analyzed by the method of the Transverse nTransmission Line (TTL), developed by H. C. C. Fernandes, applied in the Fourier Transform Domain (FTD). The TTL is a full-wave method, which has committed to obtaining the electromagnetic fields in terms of the transverse components of the structure. The inclusion of superconducting patch is made using the complex resistive boundary condition, using the impedance of the superconductor in the Dyadic Green function, in the structure. Results are obtained from the resonance frequency depending on the parameters of the antenna using superconducting material, radiation patterns in E-Plane and H -Plane, the phased antennas array in linear and planar configurations, for different values of phase angles and different spacing between the elements

Antenas de microfita com patch supercondutor a 212 K

This work has as main objective to study the application of microstrip antennas with patch and use of superconducting arrays of planar and linear phase. Was presented a study of the main theories that explain clearly the superconductivity. The BCS theory, Equations of London and the Two Fluid Model are theories that supported the implementation of the superconducting microstrip antennas. Arrangements phase was analyzed in linear and planar configuration of its antennas are reported factors such arrays to settings and criteria of phase and the spacing between the elements that make the arrayst was reviewed in order to minimize losses due to secondary lobes. The antenna used has a rectangular patch Sn5InCa2Ba4Cu10Oy the superconducting material was analyzed by the method of Transverse Transmission Line (TTL) applied in the field of Fourier transform (FTD). The TTL is a full-wave method, which has committed to obtaining the electromagnetic fields in terms of cross-cutting components of the structure. The inclusion of superconducting patch is made using the boundary condition, complex resistive. Are obtained when the resonant frequency depending on the parameters of the antenna, radiation pattern of E-Plan and H-Plan for the M-phase arrangements of antennas in the linear and planar configurations for different values of phase and spacing between the elements.

Pareamento BCS em um Líquido de Luttinger em 1D

In this work we investigate the effect of a BCS-type pairing term for free spinless fermions, with a propensity to form a condensate of pairs in a 1+1 dimension. Using the of bosonization technique we explore the possible condition of existence of quasiparticles in a superconducting state. Although there is no spontaneous breaking of chiral symmetry the propagator of one-particle fermion is massive and, in fact, resembles the one-particle Green s function of conventional quasiparticles