Stability of the curvature perturbation in dark sectors` mutual interacting models

We consider perturbations in a cosmological model with a small coupling between dark energy and dark matter. We prove that the stability of the curvature perturbation depends on the type of coupling between dark sectors. When the dark energy is of quintessence type, if the coupling is proportional to the dark matter energy density, it will drive the instability in the curvature perturbations: however if the coupling is proportional to the energy density of dark energy, there is room for the stability in the curvature perturbations. When the dark energy is of phantom type, the perturbations are always stable, no matter whether the coupling is proportional to the one or the other energy density. (C) 2008 Elsevier B.V. All rights reserved.

Competitive Solar Heating Systems for Residential Buildings (REBUS)

Research on solar combisystems for the Nordic and Baltic countries have been carriedout. The aim was to develop competitive solar combisystems which are attractive tobuyers and to educate experts in the solar heating field.The participants of the projects were the universities: Technical University of Denmark,Dalarna University, University of Oslo, Riga Technical University and Lund Institute ofTechnology, as well as the companies: Metro Therm A/S (Denmark), Velux A/S(Denmark), Solentek AB (Sweden), SolarNor (Norway) and SIA Grandeg (Latvia).The project included education, research, development and demonstration. Theactivities started in 2003 and were finished by the end of 2006. A number of Ph.D.studies in Denmark, Sweden and Latvia, and a post-doc. study in Norway were carriedout. Close cooperation between the researchers and the industry partners ensured thatthe results of the projects can be utilized. The industry partners will soon be able tobring the developed systems into the market.In Denmark and Norway the research and development focused on solarheating/natural gas systems, and in Sweden and Latvia the focus was on solarheating/pellet systems. Additionally, Lund Institute of Technology and University ofOslo studied solar collectors of various types being integrated into the building.

Characterization of residential chimney conditions for flue gas flow measurements

A literature survey and a theoretical study were performed to characterize residential chimney conditions for flue gas flow measurements. The focus is on Pitot-static probes to give sufficient basis for the development and calibration of a velocity pressure averaging probe suitable for the continuous dynamic (i.e. non steady state) measurement of the low flow velocities present in residential chimneys. The flow conditions do not meet the requirements set in ISO 10780 and ISO 3966 for Pitot-static probe measurements, and the methods and their uncertainties are not valid. The flow velocities in residential chimneys from a heating boiler under normal operating condi-tions are shown to be so low that they in some conditions result in voiding the assumptions of non-viscous fluid justifying the use of the quadratic Bernoulli equation. A non-linear Reynolds number dependent calibration coefficient that is correcting for the viscous effects is needed to avoid significant measurement errors. The wide range of flow velocity during normal boiler operation also results in the flow type changing from laminar, across the laminar to turbulent transition region, to fully turbulent flow, resulting in significant changes of the velocity profile during dynamic measurements. In addition, the short duct lengths (and changes of flow direction and duct shape) used in practice are shown to result in that the measurements are done in the hydrodynamic entrance region where the flow velocity profiles most likely are neither symmetrical nor fully developed. A measurement method insensitive to velocity profile changes is thus needed, if the flow velocity profile cannot otherwise be determined or predicted with reasonable accuracy for the whole measurement range. Because of particulate matter and condensing fluids in the flue gas it is beneficial if the probe can be constructed so that it can easily be taken out for cleaning, and equipped with a locking mechanism to always ensure the same alignment in the duct without affecting the calibration. The literature implies that there may be a significant time lag in the measurements of low flow rates due to viscous effects in the internal impact pressure passages of Pitot probes, and the significance in the discussed application should be studied experimentally. The measured differential pressures from Pitot-static probes in residential chimney flows are so low that the calibration and given uncertainties of commercially available pressure transducers are not adequate. The pressure transducers should be calibrated specifically for the application, preferably in combination with the probe, and the significance of all different error sources should be investigated carefully. Care should be taken also with the temperature measurement, e.g. with averaging of several sensors, as significant temperature gradients may be present in flue gas ducts.

Emissions Characterisation of residential pellet boilers during start-up and stop periods

In this study, gaseous emissions and particles are measured during start-up and stop periods for an over-fed boiler and an under-fed boiler. Both gaseous and particulate matter emissions are continuously measured in the laboratory. The measurement of gaseous emissions includes oxygen (O2), carbon dioxide (CO2), carbon monoxide (CO), nitrogen oxide and (NO). The emissions rates are calculated from measured emissions concentrations and flue gas flow. The behaviours of the boilers during start-up and stop periods are analysed and the emissions are characterised in terms of CO, NO, TOC and particles (PM2.5 mass and number). The duration of the characterised periods vary between two boilers due to the difference in type of ignition and combustion control. The under-fed boiler B produces higher emissions during start-up periods than the over-fed boiler A. More hydrocarbon and particles are emitted by the under-fed boiler during stop periods. Accumulated mass of CO and TOC during start-up and stop periods contribute a major portion of the total mass emitted during whole operation. However, accumulated mass of NO and PM during start-up and stop periods are not significant as the duration of emission peak is relatively short.

EMISSIONS CHARACTERISTICS OF A RESIDENTIAL PELLET BOILER AND A STOVE

Gaseous and particulate emissions from a residential pellet boiler and a stove are measured at a realistic 6-day operation sequence and during steady state operation. The aim is to characterize the emissions during each phase in order to identify when the major part of the emissions occur to enable actions for emission reduction where the savings can be highest. The characterized emissions comprised carbon monoxide (CO), nitrogen oxide (NO), total organic carbon (TOC) and particulate matter (PM 2.5). In this study, emissions were characterised by mass concentration and emissions during start-up and stop phases were also presented in accumulated mass. The influence of start-up and stop phases on the emissions, average emission factors for the boiler and stove were analysed using the measured data from a six-days test. The share of start-up and stop emissions are significant for CO and TOC contributing 95% and 89% respectively at the 20kW boiler and 82% and 89% respectively at the 12 kW stove. NO and particles emissions are shown to dominate during stationary operation.

Energy efficient and economic renovation of residential buildings with low-temperature heating and air heat recovery

With the building sector accounting for around 40% of the total energy consumption in the EU, energy efficiency in buildings is and continues to be an important issue. Great progress has been made in reducing the energy consumption in new buildings, but the large stock of existing buildings with poor energy performance is probably an even more crucial area of focus. This thesis deals with energy efficiency measures that can be suitable for renovation of existing houses, particularly low-temperature heating systems and ventilation systems with heat recovery. The energy performance, environmental impact and costs are evaluated for a range of system combinations, for small and large houses with various heating demands and for different climates in Europe. The results were derived through simulation with energy calculation tools. Low-temperature heating and air heat recovery were both found to be promising with regard to increasing energy efficiency in European houses. These solutions proved particularly effective in Northern Europe as low-temperature heating and air heat recovery have a greater impact in cold climates and on houses with high heating demands. The performance of heat pumps, both with outdoor air and exhaust air, was seen to improve with low-temperature heating. The choice between an exhaust air heat pump and a ventilation system with heat recovery is likely to depend on case specific conditions, but both choices are more cost-effective and have a lower environmental impact than systems without heat recovery. The advantage of the heat pump is that it can be used all year round, given that it produces DHW. Economic and environmental aspects of energy efficiency measures do not always harmonize. On the one hand, lower costs can sometimes mean larger environmental impact; on the other hand there can be divergence between different environmental aspects. This makes it difficult to define financial subsidies to promote energy efficiency measures.

Emissions from realistic operation of residential wood pellets heating systems

Emissions from residential combustion appliances vary significantly depending on the firing behaviours and combustion conditions, in addition to combustion technologies and fuel quality. Although wood pellet combustion in residential heating boilers is efficient, the combustion conditions during start-up and stop phases are not optimal and produce significantly high emissions such as carbon monoxide and hydrocarbon from incomplete combustion. The emissions from the start-up and stop phases of the pellet boilers are not fully taken into account in test methods for ecolabels which primarily focus on emissions during operation on full load and part load. The objective of the thesis is to investigate the emission characteristics during realistic operation of residential wood pellet boilers in order to identify when the major part of the annual emissions occur. Emissions from four residential wood pellet boilers were measured and characterized for three operating phases (start-up, steady and stop). Emissions from realistic operation of combined solar and wood pellet heating systems was continuously measured to investigate the influence of start-up and stop phases on total annual emissions. Measured emission data from the pellet devices were used to build an emission model to predict the annual emission factors from the dynamic operation of the heating system using the simulation software TRNSYS. Start-up emissions are found to vary with ignition type, supply of air and fuel, and time to complete the phase. Stop emissions are influenced by fan operation characteristics and the cleaning routine. Start-up and stop phases under realistic operation conditions contribute 80 – 95% of annual carbon monoxide (CO) emission, 60 – 90% total hydrocarbon (TOC), 10 – 20% of nitrogen oxides (NO), and 30 – 40% particles emissions. Annual emission factors from realistic operation of tested residential heating system with a top fed wood pelt boiler can be between 190 and 400 mg/MJ for the CO emissions, between 60 and 95 mg/MJ for the NO, between 6 and 25 mg/MJ for the TOC, between 30 and 116 mg/MJ for the particulate matter and between 2x10-13 /MJ and 4x10-13 /MJ for the number of particles. If the boiler has the cleaning sequence with compressed air such as in boiler B2, annual CO emission factor can be up to 550 mg/MJ. Average CO, TOC and particles emissions under realistic annual condition were greater than the limits values of two eco labels. These results highlight the importance of start-up and stop phases in annual emission factors (especially CO and TOC). Since a large or dominating part of the annual emissions in real operation arise from the start-up and stop sequences, test methods required by the ecolabels should take these emissions into account. In this way it will encourage the boiler manufacturers to minimize annual emissions. The annual emissions of residential pellet heating system can be reduced by optimizing the number of start-ups of the pellet boiler. It is possible to reduce up to 85% of the number of start-ups by optimizing the system design and its controller such as switching of the boiler pump after it stops, using two temperature sensors for boiler ON/OFF control, optimizing of the positions of the connections to the storage tank, increasing the mixing valve temperature in the boiler circuit and decreasing the pump flow rate. For 85 % reduction of start-ups, 75 % of CO and TOC emission factors were reduced while 13% increase in NO and 15 % increase in particle emissions was observed.

Assessing the physical environment of older people’s residential care facilities: development of the Swedish version of the Sheffield Care Environment Assessment Matrix (S-SCEAM)

Background There is emerging evidence that the physical environment is important for health, quality of life and care, but there is a lack of valid instruments to assess health care environments. The Sheffield Care Environment Assessment Matrix (SCEAM), developed in the United Kingdom, provides a comprehensive assessment of the physical environment of residential care facilities for older people. This paper reports on the translation and adaptation of SCEAM for use in Swedish residential care facilities for older people, including information on its validity and reliability. Methods SCEAM was translated into Swedish and back-translated into English, and assessed for its relevance by experts using content validity index (CVI) together with qualitative data. After modification, the validity assessments were repeated and followed by test-retest and inter-rater reliability tests in six units within a Swedish residential care facility that varied in terms of their environmental characteristics. Results Translation and back translation identified linguistic and semantic related issues. The results of the first content validity analysis showed that more than one third of the items had item-CVI (I-CVI) values less than the critical value of 0.78.  After modifying the instrument, the second content validation analysis resulted in I-CVI scores above 0.78, the suggested criteria for excellent content validity. Test-retest reliability showed high stability (96% and 95% for two independent raters respectively), and inter-rater reliability demonstrated high levels of agreement (95% and 94% on two separate rating occasions). Kappa values were very good for test-retest (κ= 0.903 and 0.869) and inter-rater reliability (κ= 0.851 and 0.832). Conclusions Adapting an instrument to a domestic context is a complex and time-consuming process, requiring an understanding of the culture where the instrument was developed and where it is to be used. A team, including the instrument’s developers, translators, and researchers is necessary to ensure a valid translation and adaption. This study showed preliminary validity and reliability evidence for the Swedish version (S-SCEAM) when used in a Swedish context. Further, we believe that the S-SCEAM has improved compared to the original instrument and suggest that it can be used as a foundation for future developments of the SCEAM model.

Comparison Of Demand Pattern Calibration In Water Distribution Networks With Geographic And Non-Geographic Parameterization

Demands are one of the most uncertain parameters in a water distribution network model. A good calibration of the model demands leads to better solutions when using the model for any purpose. A demand pattern calibration methodology that uses a priori information has been developed for calibrating the behaviour of demand groups. Generally, the behaviours of demands in cities are mixed all over the network, contrary to smaller villages where demands are clearly sectorised in residential neighbourhoods, commercial zones and industrial sectors. Demand pattern calibration has a final use for leakage detection and isolation. Detecting a leakage in a pattern that covers nodes spread all over the network makes the isolation unfeasible. Besides, demands in the same zone may be more similar due to the common pressure of the area rather than for the type of contract. For this reason, the demand pattern calibration methodology is applied to a real network with synthetic non-geographic demands for calibrating geographic demand patterns. The results are compared with a previous work where the calibrated patterns were also non-geographic.

A restatement of the welafare costs of inflation. The wast of scarce resources in the manufacturing , banking and household sectors

Lucas (2000) estimates that the US welfare costs of inflation are around 1% of GDP. This measurement is consistent with a speci…c distorting channel in terms of the Bailey triangle under the demand for monetary base schedule (outside money): the displacement of resources from the production of consumption goods to the household transaction time à la Baumol. Here, we consider also several new types of distortions in the manufacturing and banking industries. Our new evidences show that both banks and firms demand special occupational employments to avoid the inflation tax. We de…ne the concept of ”the foat labor”: The occupational employments that are aflected by the in‡ation rates. More administrative workers are hired relatively to the bluecollar workers for producing consumption goods. This new phenomenon makes the manufacturing industry more roundabout. To take into account this new stylized fact and others, we redo at same time both ”The model 5: A Banking Sector -2” formulated by Lucas (1993) and ”The Competitive Banking System” proposed by Yoshino (1993). This modelling allows us to characterize better the new types of misallocations. We …nd that the maximum value of the resources wasted by the US economy happened in the years 1980-81, after the 2nd oil shock. In these years, we estimate the excess resources that are allocated for every speci…c distorting channel: i) The US commercial banks spent additional resources of around 2% of GDP; ii) For the purpose of the firm foating time were used between 2.4% and 4.1% of GDP); and iii) For the household transaction time were allocated between 3.1% and 4.5 % of GDP. The Bailey triangle under the demand for the monetary base schedule represented around 1% of GDP, which is consistent with Lucas (2000). We estimate that the US total welfare costs of in‡ation were around 10% of GDP in terms of the consumption goods foregone. The big di¤erence between our results and Lucas (2000) are mainly due to the Harberger triangle in the market for loans (inside money) which makes part of the household transaction time, of the …rm ‡oat labor and of the distortion in the banking industry. This triangle arises due to the widening interest rates spread in the presence of a distorting inflation tax and under a fractionally reserve system. The Harberger triangle can represent 80% of the total welfare costs of inflation while the remaining percentage is split almost equally between the Bailey triangle and the resources used for the bank services. Finally, we formulate several theorems in terms of the optimal nonneutral monetary policy so as to compare with the classical monetary theory.

The Brazilian and the french private equity sectors from 2006 to present: a comparative analysis

Private equity, ou o ato de fundos ou investidores de investir em empresas não cotadas em bolsa pública, assumiu uma importância crescente no mundo financeiro nos últimos anos. De fato, enquanto o surgimento de um setor de private equity (PE) tem sido um grande fenômeno em mercados emergentes desde meados dos anos 2000, a crise financeira mundial enfraqueceu private equity no mundo desenvolvido. Assim, esta pesquisa vai se concentrar em dois países com dinâmicas supostamente muito diferentes em relação a este sector: França e Brasil. O objetivo será o de discernir padrões gerais de comportamento em ambos os sectores de PE durante todo o período compreendido 2006-2013, e tentar determinar em que medida eles são comparáveis. Utilizando a literatura como fonte conceitual para o quadro comparativo a ser desenvolvido, será analisado se as condições do mercado e do ambiente institucional evoluíram durante o período estudado na França e no Brasil, se comparar, e se eles impactaram o nível de atividade de private equity - oferta e demanda de fundos - em ambos os países. Para identificar esses padrões, a pesquisa contará com uma análise de dados exploratória qualitativa, com base em um quadro dos determinantes do setor de PE identificados e retirados da literatura acadêmica. Esta pesquisa trazera sua contribuição para o trabalho acadêmico existente sobre private equity, graças à sua natureza comparativa e para a sua conclusão sobre a relevância dos determinantes acima mencionados sobre a atividade de private equity na França e no Brasil.

The impact of the 2008 economic recession on three residential property type investments: a case study of five diverse zip codes in Washington DC, USA

There has been 47 recessions in the United States of America (US) since 1790. US recessions have increasingly affected economies of other countries in the world as nations become more and more interdependent on each other. The worst economic recession so far was the “Great Depression” – an economic recession that was caused by the 1929 crash of the stock market in the US. The 2008 economic recession in the US was a result of the burst of the “housing bubble” created by predatory lending. The economic recession resulted in increased unemployment (according to NBER 8.7 million jobs were lost from Feb. 2008 to Feb. 2010); decrease in GDP by 5.1%; increase in poverty level from 12.1% (2007) to 16.0% (2008) (NBER) This dissertation is an attempt to research the impact of the 2008 economic recession on different types of residential investments: a case study of five (5) diverse neighborhoods/zip codes in Washington DC, USA The main findings were that the effect of the 2008 economic depression on the different types of residential properties was dependent on the location of the property and the demographics/socio-economic factors associated with that location.

Paisagem, um patrimônio esquecido: subsídios para a construção de uma metodologia de valoração e proteção do cenário natural litorâneo

The so-called "residential tourism" came to intensify the previous occupation of the coastal zones, characterized by traditional beach houses, and brought significant consequences for their spatial configuration, and especially for its scenic value of the landscape. Although there is the intention to regulate the activities of enterprising groups by some legal instruments to control the use and occupation of land, and to contain some negative effects, the actions of government are still inefficient in trying to follow the implications on the landscape from the accelerated growth of the real estate and touristic sectors. Supported in the speech of economic development and income generation, public managers prioritize areas to attract tourists to the detriment of preserving important physical attributes of the natural environment that contribute significantly to the quality of life. The result can be noticed in the use of natural elements as one of the major components in the land valorization, and in the immediate attraction of investors and enterprising. Therefore, the objective of this work is to contribute to the debate on the landscape preservation a little detailed thematic in view of their relevance in the current context - by indicating subsidies to the creation of a methodology for the evaluation and protection of coastal zones that may assist the government in creating new instruments, and better prepare it in control of the occupation of these areas. For such, was followed two ways to analysis: the indirect method and the direct method. The first is grounded in the evaluation of landscape attributes, which is based on the work of Raquel Tardin (2008) and Eduardo Cuesta, Encarnación Algarra and Isabel Pastor (2001). The second, based on the research of Leticia and Carlos Hardt (2010) and on the concepts of phenomenology - expressed by Antonio Christofoletti (1985) and Yi-Fu Tuan (1983) - considers the population perspective on the quality of the natural scenery. Developed through cartographic materials, photographic collections and quantitative tables, this dissertation utilized as a case study the beaches of Barra de Tabatinga and Camurupim, located in the city of Nísia Floresta/RN. Despite already being sighted spaces of advanced stage of landscape degradation in these locations, areas of remarkable scenic value can still be found, what reinforce the urgency in adopting preservationists actions. The absence of laws focused on the management and protection of the landscape singularities associated with the inefficiency of the government to invigilate the land occupation in coastal zones, encourage the excessive action of the real estate-tourism, and consequently make the government the main responsible for the environmental and landscape impacts in these areas - by its omission or by their connivance. Therefore, the legislation permeates this entire process and constitutes itself as the most effective way to guarantee the right to the landscape to present and future generations. Are also pointed some important considerations to build a methodology, especially concerning possibilities of improvements and adaptations of its applicability in each case

Análise de desempenho na rede metropolitana de saúde da Universidade Federal do Rio Grande do Norte : um dimensionamento aplicado a telemedicina e a telessaúde utilizando QoS baseado no padrão IEEE 802.1Q

It s notorious the advance of computer networks in recent decades, whether in relation to transmission rates, the number of interconnected devices or the existing applications. In parallel, it s also visible this progress in various sectors of the automation, such as: industrial, commercial and residential. In one of its branches, we find the hospital networks, which can make the use of a range of services, ranging from the simple registration of patients to a surgery by a robot under the supervision of a physician. In the context of both worlds, appear the applications in Telemedicine and Telehealth, which work with the transfer in real time of high resolution images, sound, video and patient data. Then comes a problem, since the computer networks, originally developed for the transfer of less complex data, is now being used by a service that involves high transfer rates and needs requirements for quality of service (QoS) offered by the network . Thus, this work aims to do the analysis and comparison of performance of a network when subjected to this type of application, for two different situations: the first without the use of QoS policies, and the second with the application of such policies, using as scenario for testing, the Metropolitan Health Network of the Federal University of Rio Grande do Norte (UFRN)