An overview on a nonideal system with three and a half degrees of freedom

The present paper studies a system comprised of two blocks connected by springs and dampers, and a DC motor with limited power supply fixed on a block, characterizing a non-ideal problem. This DC motor exciting the system causes interactions between the motor and the structure supporting it. Because of that, the non-ideal mathematical formulation of the problem has one and a half extra degree of freedom than the ideal one. A suitable choice of physical parameters leads to internal resonance conditions, that is, its natural frequencies are multiple of each other, by a known integer quantity. The purpose here is to study the dynamic behavior of the system using an analytical method based on perturbation techniques. The literature shows that the averaging method is the more flexible method concerning non-ideal problems. Summarizing, an steady state solution in amplitude and phase coordinates was obtained with averaging method showing the dependence of the structure amplitudes with the rotation frequency of the motor. Moreover, this solution shows that on of the amplitude coordinates has influence in the determination of the stationary rotation frequency. The analytical solution obtained shows the presence of the rotation frequency in expressions representing the oscillations of the structure, and the presence of amplitude coordinates in expressions describing the dynamic motion of the DC motor. These characteristics show the influence not only of the motor on structure but also of the response of the structure on dynamical behavior of the motor. Copyright © 2005 by ASME.

Microhardness assessment of different commercial brands of resin composites with different degrees of translucence

Owing to improvements in its mechanical properties and to the availability of shade and translucence resources, resin composite has become one of the most widely used restorative materials in present day Dentistry. The aim of this study was to assess the relation between the surface hardness of seven different commercial brands of resin composites (Charisma, Fill Magic, Master Fill, Natural Look, Opallis, Tetric Ceram, and Z250) and the different degrees of translucence (translucid, enamel and dentin). Vickers microhardness testing revealed significant differences among the groups. Z250 was the commercial brand that showed the best performance in the hardness test. When comparing the three groups assessed within the same brand, only Master Fill and Fill Magic presented statistically significant differences among all of the different translucencies. Natural Look was the only one that showed no significant difference among any of the three groups. Charisma, Opallis, Tetric Ceram and Z250 showed significant differences among some of the tested groups. Based on the results found in this study, it was not possible to establish a relation between translucence and the microhardness of the resin composites assessed. Depending on the material assessed, however, translucence variation did affect the microhardness values of the resin composites.

Cleaning Conveyor Belts in the Chicken-Cutting Area of a Poultry Processing Plant with 45 degrees C Water

Conveyor belts are widely used in food handling areas, especially in poultry processing plants. Because they are in direct contact with food and it is a requirement of the Brazilian health authority, conveyor belts are required to be continuously cleaned with hot water under pressure. The use of water in this procedure has been questioned based on the hypothesis that water may further disseminate microorganisms but not effectively reduce the organic material on the surface. Moreover, reducing the use of water in processing may contribute to a reduction in costs and emission of effluents. However, no consistent evidence in support of removing water during conveyor belt cleaning has been reported. Therefore, the objective of the present study was to compare the bacterial counts on conveyor belts that were or were not continuously cleaned with hot water under pressure. Superficial samples from conveyor belts (cleaned or not cleaned) were collected at three different times during operation (T1, after the preoperational cleaning [5 a.m.]; T2, after the first work shift [4 p.m.]; and T3, after the second work shift [1:30 a.m.]) in a poultry meat processing facility, and the samples were subjected to mesophilic and enterobacterial counts. For Enterobacteriaceae, no significant differences were observed between the conveyor belts, independent of the time of sampling or the cleaning process. No significant differences were observed between the counts of mesophilic bacteria at the distinct times of sampling on the conveyor belt that had not been subjected to continuous cleaning with water at 45 degrees C. When comparing similar periods of sampling, no significant differences were observed between the mesophilic counts obtained from the conveyor belts that were or were not subjected to continuous cleaning with water at 45 degrees C. Continuous cleaning with water did not significantly reduce microorganism counts, suggesting the possibility of discarding this procedure in chicken processing.

Control of Limit Cycle Oscillation in a Three Degrees of Freedom Airfoil Section Using Fuzzy Takagi-Sugeno Modeling

This work presents a strategy to control nonlinear responses of aeroelastic systems with control surface freeplay. The proposed methodology is developed for the three degrees of freedom typical section airfoil considering aerodynamic forces from Theodorsen's theory. The mathematical model is written in the state space representation using rational function approximation to write the aerodynamic forces in time domain. The control system is designed using the fuzzy Takagi-Sugeno modeling to compute a feedback control gain. It useds Lyapunov's stability function and linear matrix inequalities (LMIs) to solve a convex optimization problem. Time simulations with different initial conditions are performed using a modified Runge-Kutta algorithm to compare the system with and without control forces. It is shown that this approach can compute linear control gain able to stabilize aeroelastic systems with discontinuous nonlinearities.

Chilling curves for Piaractus mesopotamicus (Holmberg, 1887) embryos stored at-8 degrees C

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Bacterial and chemical leaching of chalcopyrite concentrates as affected by the redox potential and ferric/ferrous iron ratio at 22 degrees C

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

325 degrees C thermoluminescence peak growth in quartz related to oxygen vacancies

The thermoluminescence intensity as a function of gamma-ray dose of the 325 degreesC peak, in quartz grains extracted from sea sediments and from fluvial aeolic dunes, is studied. It is found that the response curve at low doses has a concavity directed opposite to that of quartz grains extracted from archaeological potteries. To explain this behavior a model is proposed here based on oxygen vacancies and [AlO4/h](0) centers. The experimentally observed ESR intensity of E-I'-centers as a function of radiation dose can also be explained by this model.

Process for producing biodiesel fuel with reduced viscosity and a cloud point below thirty-two (32) degrees fahrenheit

Triglycerides are reacted in a liquid phase reaction with methanol and a homogeneous basic catalyst. The reaction yields a spatially separated two phase result with an upper located non-polar phase consisting principally of non-polar methyl esters and a lower located phase consisting principally of glycerol and residual methyl esters. The glycerol phase is passed through a strong cationic ion exchanger to remove anions, resulting in a neutral product which is flashed to remove methanol and which is reacted with isobutylene in the presence of a strong acid catalyst to produce glycerol ethers. The glycerol ethers are then added back to the upper located methyl ethyl ester phase to provide an improved biodiesel fuel.

On the relationship between squid and the environment: artisanal jigging for Loligo plei at Sao Sebastiao Island (24 degrees S), southeastern Brazil

The squid Loligo plei concentrates in the southeastern Brazil Bight, where it has traditionally supported small-scale fisheries around Sao Sebastiao Island (SSI). Sea surface temperature (SST), chlorophyll-a (Chl a), windspeed, wave height, rainfall, and lunar phase are related to fishing records and to the results of a survey of local fishers to investigate how they believe environmental variables might affect catches of L. plei. Daily fishery-dependent data over the years 2005-2009 were obtained from a fishing cooperative and were matched with satellite and meteorological forecast data. Generalized linear models were used to explore the significance of environmental variables in relation to variability in catch and catch per unit effort (cpue). Squid are fished with jigs in water shallower than 20 m, generally where SST is warmer and Chl a and windspeed are lower. Cpue and monthly catches decreased from 2005 to 2008, followed by a slight increase in 2009. The correlations between fishery and environmental data relate well to fishers` oceanological knowledge, underscoring the potential of incorporating such knowledge into evaluations of the fishery.

Slipper lobster (Crustacea, Decapoda, Scyllaridae) fisheries off the southeastern coast of Brazil: I. Exploitation patterns between 23 degrees 00 ` and 29 degrees 65 ` S

In southeastern Brazil, slipper lobsters (Scyllarides deceptor and S. brasiliensis) are caught by fleets trawling for pink shrimp (Farfantepenaeus brasiliensis and F. paulensis) and pots-and-traps fishing for octopuses (Octopus vulgaris). Eight hundred fifty-six landings of shrimp trawlers and 28 of the octopus fleet were monitored in the Santos region from May 2006 to April 2007. Additional analysis was performed using a database covering the period from 1999 onwards. This study seeks to identify the recent patterns of exploitation of these lobsters with the goal of improving the way towards fishery sustainability. Scyllarides deceptor was the dominant lobster species with 1032 specimens collected, while only three specimens of S. brasiliensis were identified. The area known as the `Farol do Boi` (23 degrees 01`S, 45 degrees 00`W to 25 degrees 00`S, 45 degrees 40`W at 60-135 m deep) showed the highest Catch Per Unit Effort (CPUE). A General Linearized Model (GLM) was used to investigate the factors influencing variations in CPUE in trawl fleets and led to the conclusion that year, month and depth were the most important factors. We detected a significant decrease in the relative abundance of lobsters in the fishing zone despite relatively low fishing effort. Recommendations to protect the lobster resources include taking special precautions in the natural refuge area of the `Farol do Boi`, as an exclusion zone for trawl fleets, and controlling the use of traps longlines to catch octopuses. Concerns about depensatory processes due to the over-exploitation of lobster populations around the world are raised. (C) 2009 Elsevier B.V. All rights reserved.

Spatial and temporal patterns in size and maturation of Loligo plei and Loligo sanpaulensis (Cephalopoda: Loliginidae) in southeastern Brazilian waters, between 23 degrees S and 27 degrees S

Patterns of population dynamics of Loligo plei and Loligo sanpaidensis in Southeastern Brazil were investigated with samples obtained from commercial catches and research cruises from 1999 to 2000 and from 2002 to 2003. Size and maturity Structure of the two species varied according to depth and season. Body size decreased with depth for L plei, whereas for L. sanpaidensis size increased with depth LIP to 100 m and decreased again in deeper areas. GSI and incidence of mature animals decreased with depth in both species. L. plei females matured at a larger size in summer, while size at maturity in L. sanpaulensis was greater in autumn. For L. plei, reproductive events Occurred in the late winter and spring, in depths up to 40 m, and during summer in inshore waters. L. sanpaidensis increased reproductive activity ill Summer, winter and spring between depths of 30 and 80 Ill. The presence of high proportions of immature Squid offshore Suggests that juveniles might develop in these areas and, upon maturation, migrate back to inshore waters to spawn, particularly in spring and Summer. However, differences found in aggregation patterns in different depth strata, as well as the seasonal differences found in the size structure of L. plei and L. sanpaidensis, Could ultimately be due to Changes in the water Column related to food availability. Considering that L. plei and L. sanpaidensis are both caught as by-catch by shrimp trawlers throughout file year, we also discuss hypotheses on the life cycle of the species and its implications for fishery management. We recommend measures to protect squid spawning grounds by creating spring and summer protected areas where trawling would be prohibited until 60 m depth, i.e. in the area and time of year when mature individuals concentrate.

Eddy-induced upwelling off Cape Sao Tome (22 degrees S, Brazil)

The regional ocean off southeast Brazil (20 degrees S-28 degrees S) is known as a current-eddy-upwelling region. The proximity of the Brazil Current to the coast in the Cape Sao Tome vicinities, as well as of its quasi-stationary unstable meanders, suggests the possibility of background eddy-induced upwelling. Such phenomenon can intensify the prevalent coastal upwelling due to wind and topographic effects. In this paper, with the help of a numerical simulation, we provide evidence that eddy-induced upwelling in the absence of wind is possible in this region. The simulation was conducted with a regional configuration of the 3-D Princeton Ocean Model initialized by a feature-based implementation of the Brazil Current and Cape Frio eddy, blended with climatology. (C) 2010 Elsevier Ltd. All rights reserved.

Is the Brazil Current eddy-dominated to the north of 20 degrees S?

The Brazil Current (BC) originates with the arrival and bifurcation of the southernmost branch of the South Equatorial Current (sSEC) between 10-20 degrees S. Previous climatological studies showed a stratified sSEC bifurcation and that the resulting southern branch formed a shallow BC - a weak western boundary current. The analysis of three recent synoptic surveys and global model outputs challenge the description of a continuous BC. The sSEC bifurcation signal near the continental margin was unclear in the analyses, and the velocity fields were dominated by mesoscale eddies. Recurrent anticyclones that seemed to be related to the meandering BC led us to construct a picture of a flow strongly influenced by topography and probably very unstable. Given this new emerging scenario, we hypothesize that the Brazil Current is eddy-dominated to the north of 20 degrees S. Citation: Soutelino, R. G., I. C. A. da Silveira, A. Gangopadhyay, and J. A. Miranda (2011), Is the Brazil Current eddy-dominated to the north of 20 S?, Geophys. Res. Lett., 38, L03607, doi:10.1029/2010GL046276.