Repeated exposure to Lutzomyia intermedia sand fly saliva induces local expression of interferon-inducible genes both at the site of injection in mice and in human blood.

During a blood meal, Lutzomyia intermedia sand flies transmit Leishmania braziliensis, a parasite causing tegumentary leishmaniasis. In experimental leishmaniasis, pre-exposure to saliva of most blood-feeding sand flies results in parasite establishment in absence of any skin damages in mice challenged with dermotropic Leishmania species together with saliva. In contrast, pre-immunization with Lu. intermedia salivary gland sonicate (SGS) results in enhanced skin inflammatory exacerbation upon co-inoculation of Lu. intermedia SGS and L. braziliensis. These data highlight potential unique features of both L. braziliensis and Lu. intermedia. In this study, we investigated the genes modulated by Lu. intermedia SGS immunization to understand their potential impact on the subsequent cutaneous immune response following inoculation of both SGS and L. braziliensis. The cellular recruitment and global gene expression profile was analyzed in mice repeatedly inoculated or not with Lu. intermedia. Microarray gene analysis revealed the upregulation of a distinct set of IFN-inducible genes, an immune signature not seen to the same extent in control animals. Of note this INF-inducible gene set was not induced in SGS pre-immunized mice subsequently co-inoculated with SGS and L. braziliensis. These data suggest the parasite prevented the upregulation of this Lu. intermedia saliva-related immune signature. The presence of these IFN-inducible genes was further analyzed in peripheral blood mononuclear cells (PBMCs) sampled from uninfected human individuals living in a L. braziliensis-endemic region of Brazil thus regularly exposed to Lu. intermedia bites. PBMCs were cultured in presence or absence of Lu. intermedia SGS. Using qRT-PCR we established that the IFN-inducible genes induced in the skin of SGS pre-immunized mice, were also upregulated by SGS in PBMCs from human individuals regularly exposed to Lu. intermedia bites, but not in PBMCs of control subjects. These data demonstrate that repeated exposure to Lu. intermedia SGS induces the expression of potentially host-protective IFN-inducible genes.

Rhumatologie. Une nouvelle option thérapeutique dans la prise en charge de l'inflammation chronique en rhumatologie: les inhibiteurs des janus kinases [A new therapeutical option for chronic inflammation in rheumatology: janus kinases inhibitors (JAK)].

In the last 15 years, the therapeutical options for the treatment of chronic inflammatory diseases in rheumatology have increased a lot. Nevertheless, some patients do not respond or respond partially to the current therapies--including to the biologics therapy. Tofacitinib (Xeljanz) is now on the Swiss market. It inhibits the JAK pathway. Tofacitinib--as monotherapy or with methotrexate--improves the control of rheumatoid arthritis (RA). In a comparative study, tofacitinib was as effective as adalimumab. Further, tofacitinib reduced structural damages in RA and is considered as an alternative, in case of non-response, to anti-TNF and probably to other biologics therapy. The side effects are upper respiratory tract and opportunist infections and tuberculosis. Blood count, lipids, kidney function, liver tests, CK and blood pressure have to be monitored.

Méthodes sismiques actives adaptées à l'étude de milieux hétérogènes : application aux glissements de terrain

Résumé Les glissements de terrain représentent un des principaux risques naturels dans les régions montagneuses. En Suisse, chaque année les glissements de terrains causent des dégâts qui affectent les infrastructures et ont des coûts financiers importants. Une bonne compréhension des mécanismes des glissements peut permettre d'atténuer leur impact. Celle-ci passe notamment par la connaissance de la structure interne du glissement, la détermination de son volume et de son ou ses plans de glissement. Dans un glissement de terrain, la désorganisation et la présence de fractures dans le matériel déplacé engendre un changement des paramètres physiques et en particulier une diminution des vitesses de propagation des ondes sismiques ainsi que de la densité du matériel. Les méthodes sismiques sont de ce fait bien adaptées à l'étude des glissements de terrain. Parmi les méthodes sismiques, l'analyse de la dispersion des ondes de surface est une méthode simple à mettre en oeuvre. Elle présente l'avantage d'estimer les variations des vitesses de cisaillement avec la profondeur sans avoir spécifiquement recours à l'utilisation d'une source d'onde S et de géophones horizontaux. Sa mise en oeuvre en trois étapes implique la mesure de la dispersion des ondes de surface sur des réseaux étendus, la détermination des courbes de dispersion pour finir par l'inversion de ces courbes. Les modèles de vitesse obtenus à partir de cette procédure ne sont valides que lorsque les milieux explorés ne présentent pas de variations latérales. En pratique cette hypothèse est rarement vérifiée, notamment pour un glissement de terrain dans lequel les couches remaniées sont susceptibles de présenter de fortes hétérogénéités latérales. Pour évaluer la possibilité de déterminer des courbes de dispersion à partir de réseaux de faible extension des mesures testes ont été effectuées sur un site (Arnex, VD) équipé d'un forage. Un profil sismique de 190 m de long a été implanté dans une vallée creusée dans du calcaire et remplie par des dépôts glacio-lacustres d'une trentaine de mètres d'épaisseur. Les données acquises le long de ce profil ont confirmé que la présence de variations latérales sous le réseau de géophones affecte l'allure des courbes de dispersion jusqu'à parfois empêcher leur détermination. Pour utiliser l'analyse de la dispersion des ondes de surface sur des sites présentant des variations latérales, notre approche consiste à déterminer les courbes de dispersions pour une série de réseaux de faible extension, à inverser chacune des courbes et à interpoler les différents modèles de vitesse obtenus. Le choix de la position ainsi que de l'extension des différents réseaux de géophones est important. Il tient compte de la localisation des hétérogénéités détectées à partir de l'analyse de sismique réfraction, mais également d'anomalies d'amplitudes observées sur des cartes qui représentent dans le domaine position de tir - position du récepteur, l'amplitude mesurée pour différentes fréquences. La procédure proposée par Lin et Lin (2007) s'est avérée être une méthode efficace permettant de déterminer des courbes de dispersion à partir de réseaux de faible extension. Elle consiste à construire à partir d'un réseau de géophones et de plusieurs positions de tir un enregistrement temps-déports qui tient compte d'une large gamme de distances source-récepteur. Au moment d'assembler les différentes données une correction de phase est appliquée pour tenir compte des hétérogénéités situées entre les différents points de tir. Pour évaluer cette correction nous suggérons de calculer pour deux tir successif la densité spectrale croisée des traces de même offset: Sur le site d'Arnex, 22 courbes de dispersions ont été déterminées pour de réseaux de géophones de 10 m d'extension. Nous avons également profité du forage pour acquérir un profil de sismique verticale en ondes S. Le modèle de vitesse S déduit de l'interprétation du profil de sismique verticale est utilisé comme information à priori lors l'inversion des différentes courbes de dispersion. Finalement, le modèle en deux dimension qui a été établi grâce à l'analyse de la dispersion des ondes de surface met en évidence une structure tabulaire à trois couches dont les limites coïncident bien avec les limites lithologiques observées dans le forage. Dans celui-ci des argiles limoneuses associées à une vitesse de propagation des ondes S de l'ordre de 175 m/s surmontent vers 9 m de profondeur des dépôts de moraine argilo-sableuse caractérisés par des vitesses de propagation des ondes S de l'ordre de 300 m/s jusqu'à 14 m de profondeur et supérieur ou égal à 400 m/s entre 14 et 20 m de profondeur. Le glissement de la Grande Combe (Ballaigues, VD) se produit à l'intérieur du remplissage quaternaire d'une combe creusée dans des calcaires Portlandien. Comme dans le cas du site d'Arnex les dépôts quaternaires correspondent à des dépôts glacio-lacustres. Dans la partie supérieure la surface de glissement a été localisée à une vingtaine de mètres de profondeur au niveau de l'interface qui sépare des dépôts de moraine jurassienne et des dépôts glacio-lacustres. Au pied du glissement 14 courbes de dispersions ont été déterminées sur des réseaux de 10 m d'extension le long d'un profil de 144 m. Les courbes obtenues sont discontinues et définies pour un domaine de fréquence de 7 à 35 Hz. Grâce à l'utilisation de distances source-récepteur entre 8 et 72 m, 2 à 4 modes de propagation ont été identifiés pour chacune des courbes. Lors de l'inversion des courbes de dispersion la prise en compte des différents modes de propagation a permis d'étendre la profondeur d'investigation jusqu'à une vingtaine de mètres de profondeur. Le modèle en deux dimensions permet de distinguer 4 couches (Vs1 < 175 m/s, 175 m/s < Vs2 < 225 m/s, 225 m/s < Vs3 < 400 m/s et Vs4 >.400 m/s) qui présentent des variations d'épaisseur. Des profils de sismiques réflexion en ondes S acquis avec une source construite dans le cadre de ce travail, complètent et corroborent le modèle établi à partir de l'analyse de la dispersion des ondes de surface. Un réflecteur localisé entre 5 et 10 m de profondeur et associé à une vitesse de sommation de 180 m/s souligne notamment la géométrie de l'interface qui sépare la deuxième de la troisième couche du modèle établi à partir de l'analyse de la dispersion des ondes de surface. Abstract Landslides are one of the main natural hazards in mountainous regions. In Switzerland, landslides cause damages every year that impact infrastructures and have important financial costs. In depth understanding of sliding mechanisms may help limiting their impact. In particular, this can be achieved through a better knowledge of the internal structure of the landslide, the determination of its volume and its sliding surface or surfaces In a landslide, the disorganization and the presence of fractures in the displaced material generate a change of the physical parameters and in particular a decrease of the seismic velocities and of the material density. Therefoe, seismic methods are well adapted to the study of landslides. Among seismic methods, surface-wave dispersion analysis is a easy to implement. Through it, shearwave velocity variations with depth can be estimated without having to resort to an S-wave source and to horizontal geophones. Its 3-step implementation implies measurement of surface-wave dispersion with long arrays, determination of the dispersion curves and finally inversion of these curves. Velocity models obtained through this approach are only valid when the investigated medium does not include lateral variations. In practice, this assumption is seldom correct, in particular for landslides in which reshaped layers likely include strong lateral heterogeneities. To assess the possibility of determining dispersion curves from short array lengths we carried out tests measurements on a site (Arnex, VD) that includes a borehole. A 190 m long seismic profile was acquired in a valley carved into limestone and filled with 30 m of glacio-lacustrine sediments. The data acquired along this profile confirmed that the presence of lateral variations under the geophone array influences the dispersion-curve shape so much that it sometimes preventes the dispersion curves determination. Our approach to use the analysis of surface-wave dispersion on sites that include lateral variations consists in obtaining dispersion curves for a series of short length arrays; inverting each so obtained curve and interpolating the different obtained velocity model. The choice of the location as well as the geophone array length is important. It takes into account the location of the heterogeneities that are revealed by the seismic refraction interpretation of the data but also, the location of signal amplitude anomalies observed on maps that represent, for a given frequency, the measured amplitude in the shot position - receiver position domain. The procedure proposed by Lin and Lin (2007) turned out to be an efficient one to determine dispersion curves using short extension arrays. It consists in building a time-offset from an array of geophones with a wide offset range by gathering seismograms acquired with different source-to-receiver offsets. When assembling the different data, a phase correction is applied in order to reduce static phase error induced by lateral variation. To evaluate this correction, we suggest to calculate, for two successive shots, the cross power spectral density of common offset traces. On the Arnex site, 22 curves were determined with 10m in length geophone-arrays. We also took advantage of the borehole to acquire a S-wave vertical seismic profile. The S-wave velocity depth model derived from the vertical seismic profile interpretation is used as prior information in the inversion of the dispersion-curves. Finally a 2D velocity model was established from the analysis of the different dispersion curves. It reveals a 3-layer structure in good agreement with the observed lithologies in the borehole. In it a clay layer with a shear-wave of 175 m/s shear-wave velocity overlies a clayey-sandy till layer at 9 m depth that is characterized down to 14 m by a 300 m/s S-wave velocity; these deposits have a S-wave velocity of 400 m/s between depths of 14 to 20 m. The La Grand Combe landslide (Ballaigues, VD) occurs inside the Quaternary filling of a valley carved into Portlandien limestone. As at the Arnex site, the Quaternary deposits correspond to glaciolacustrine sediments. In the upper part of the landslide, the sliding surface is located at a depth of about 20 m that coincides with the discontinuity between Jurassian till and glacio-lacustrine deposits. At the toe of the landslide, we defined 14 dispersion curves along a 144 m long profile using 10 m long geophone arrays. The obtained curves are discontinuous and defined within a frequency range of 7 to 35 Hz. The use of a wide range of offsets (from 8 to 72 m) enabled us to determine 2 to 4 mode of propagation for each dispersion curve. Taking these higher modes into consideration for dispersion curve inversion allowed us to reach an investigation depth of about 20 m. A four layer 2D model was derived (Vs1< 175 m/s, 175 m/s <Vs2< 225 m/s, 225 m/s < Vs3 < 400 m/s, Vs4> 400 m/s) with variable layer thicknesses. S-wave seismic reflection profiles acquired with a source built as part of this work complete and the velocity model revealed by surface-wave analysis. In particular, reflector at a depth of 5 to 10 m associated with a 180 m/s stacking velocity image the geometry of the discontinuity between the second and third layer of the model derived from the surface-wave dispersion analysis.

Reputation based on punishment rather than generosity allows for evolution of cooperation in sizable groups

Cooperation among unrelated individuals can arise if decisions to help others can be based on reputation. While working for dyadic interactions, reputation-use in social dilemmas involving many individuals (e.g. public goods games) becomes increasingly difficult as groups become larger and errors more frequent. Reputation is therefore believed to have played a minor role for the evolution of cooperation in collective action dilemmas such as those faced by early humans. Here, we show in computer simulations that a reputation system based on punitive actions can overcome these problems and, compared to reputation system based on generous actions, (i) is more likely to lead to the evolution of cooperation in sizable groups, (ii) more effectively sustains cooperation within larger groups, and (iii) is more robust to errors in reputation assessment. Punishment and punishment reputation could therefore have played crucial roles in the evolution of cooperation within larger groups of humans.

Laboratory Study of Structural Behavior of Alternative Dowel Bars, April 2006

Load transfer across transverse joints has always been a factor contributing to the useful life of concrete pavements. For many years, round steel dowels have been the conventional load transfer mechanism. Many problems have been associated with the round steel dowels. The most detrimental effect of the steel dowel is corrosion. Repeated loading over time also damages joints. When a dowel is repeatedly loaded over a long period of time, the high bearing stresses found at the top and bottom edge of a bar erode the surrounding concrete. This oblonging creates multiple problems in the joint. Over the past decade, Iowa State University has performed extensive research on new dowel shapes and materials to mitigate the effects of oblonging and corrosion. This report evaluates the bearing stress performance of six different dowel bar types subjected to two different shear load laboratory test methods. The first load test is the AASHTO T253 method. The second procedure is an experimental cantilevered dowel test. The major objective was to investigate and improve the current AASHTO T253 test method for determining the modulus of dowel support, k0. The modified AASHTO test procedure was examined alongside an experimental cantilever dowel test. The modified AASHTO specimens were also subjected to a small-scale fatigue test in order to simulate long-term dowel behavior with respect to concrete joint damage. Loss on ignition tests were also performed on the GFRP dowel specimens to determine the resin content percentage. The study concluded that all of the tested dowel bar shapes and materials were adequate with respect to performance under shear loading. The modified AASHTO method yielded more desirable results than the ones obtained from the cantilever test. The investigators determined that the experimental cantilever test was not a satisfactory test method to replace or verify the AASHTO T253 method.

Intra-Industry Trade, Multilateral Trade Integration, and Invasive Species Risk, December 2006

We analyze the linkage between protectionism and invasive species (IS) hazard in the context of two-way trade and multilateral trade integration, two major features of real-world agricultural trade. Multilateral integration includes the joint reduction of tariffs and trade costs among trading partners. Multilateral trade integration is more likely to increase damages from IS than predicted by unilateral trade opening under the classic Heckscher-Ohlin-Samuelson (HOS) framework because domestic production (the base susceptible to damages) is likely to increase with expanding export markets. A country integrating its trade with a partner characterized by relatively higher tariff and trade costs is also more likely to experience increased IS damages via expanded domestic production for the same reason. We illustrate our analytical results with a stylized model of the world wheat market.

Patient safety management from the perspective of nurses

OBJECTIVE To evaluate the actions of patient safety management developed in hospitals, from the perspective of nurses. METHOD This is a cross-sectional, descriptive study of the survey type. Participants were seven hospitals, in which seven nurse managers and 49 sector coordinator nurses (n = 56) answered the instrument prepared by the author. RESULTS The results showed that 100% of hospitals have an adverse event reporting system, 71.4% have a Risk Management Committee and 80% have discussions about the events. There is agreement that these discussions lead to favorable changes for patient safety in the surveyed institutions. The employees' fear of punishment for their faults, and the underreporting of events were the aspects of greatest weakness found. CONCLUSION The institutions should develop organizational policies focused on stimulating event notification and on the implementation of measures directed to a non-punitive organizational culture.

Leaf consumption and duration of instars of the cassava defoliator Erinnyis ello (L., 1758) (Lepidoptera, Sphingidae)

The objectives of this research were to evaluate leaf consumption and the developmental time of the larvae of Erynnyis ello (L., 1758) (Lepidoptera, Sphingidae) reared on cassava, in order to obtain information for the integrated management of this pest. The larvae were reared on excised cassava leaves in Petri dishes and later in gerbox, and kept in chambers at 24 ± 2 ºC and 75 ± 10% RH. The total leaf area consumed by the larva to complete its development was 589.67 cm²; each of the five instars consumed, respectively: 1.89 cm²; 5.74 cm²; 17.48 cm²; 76.66 cm²; and 487.90 cm². The consumption by the first three instars was insignificant, and did not reach 5% altogether; the 4th represented 13%; the 5th presented a consumption significantly higher, about 82.7%. The total time for the larval development was 22.61 days, and the duration for each of the five larval instar was, respectively: 4.35; 3.19; 3.32; 4.52; and 4.94 days. The pre-pupal period lasted 2.29 days. Since the highest consumption is by the 5th instar larva, the control should be applied before this age to avoid heavier damages to the cassava crop.

Ocorrência e flutuação populacional de Chrysopidae (Neuroptera) em áreas de plantio de Pinus taeda (L.) (Pinaceae) no sul do Paraná

The lacewings are very voracious predators of aphids. The objective of this research was to evaluate the occurrence of adult chrysopids in areas of Pinus reforestation where the giant conifer aphid Cinara spp. (Hemiptera: Aphididae) is causing severe damages. A total of 47 specimens were collected during one year and identified as: Chrysoperla externa (Hagen, 1861), Leucochrysa (Nodita) intermedia (Scheneir, 1851) and Leucochrysa (Nodita) vieirana (Navás, 1913). The captures in the area where the plants were one year old represented about 75% of the adults probably due to the high Cinara infestation on the trees in this area. The chrysopids were recorded mostly during the summer, possibly influenced by temperature.

Comparação dos sistemas de cultivo nativo e adensado de erva mate, Ilex paraguariensis St. Hil., quanto à ocorrência e flutuação populacional de insetos

This research was carried out in order to compare the occurrence of insects in two maté cultivation systems, native and high tree density. It was performed from August/2000 to September/2001, in a private property in São Mateus do Sul county, in Paraná State, Brazil. Visual inspections of trees and light traps were used to evaluate insect populations in both areas. For Hedypathes betulinus (Klug) (Coleoptera, Cerambycidae), only six adults were observed in the dense area. Based on presence of sawdust at the basis of the trunk, it was obtained that the number of attacked trees did not surpass 11% in either area. For Gyropsylla spegazziniana (Lizer y Trelles) (Hemiptera, Psyllidae), the number of galls per tree was counted and it was observed that the population peak occurred from November to January. For Hylesia spp. (Lepidoptera, Saturniidae) and Thelosia camina Schaus (Lepidoptera, Eupterotidae), the presence of caterpillars on the trees was noticed from September to February, with the population peak in November and December. Adults of Hylesia spp. were more numerous in February and March. Two species that were not previously recorded for Brazil on maté were identified: Hylesia paulex Dognin (83%) and Hylesia remex Dyer (17%), collected with light traps. The maté caterpillar, T. camina was not collected with these traps. Nymphs and adults of Ceroplastes grandis Hempel (Hemiptera, Coccidae) were observed along the year on the branches, with population peak between April and June for the nymphs and from September to November for the adults. It should be considered that despite higher insect incidence in the dense area compared to the native area, the first presents higher yield, and that with a good pest management program the insect problems can be minimized.

Correlation between the infestation level of Sitophilus zeamais Motschulsky, 1855 (Coleoptera, Curculionidae) and the quality factors of stored corn, Zea mays L. (Poaceae)

This experiment was carried out in order to evaluate the effect of Sitophilus zeamais on physical, physiological and sanitary quality of stored corn. Samples of 500 g of the hybrid OC-705, in three replicates, were conditioned in glasses covered with a screened lid, and kept in chamber at 25±2ºC, 70±5% RH and 12 h of photophase, for 150 days. The infestation levels were 0, 5, 15 and 50 adults/replicate, for the storage periods of 30, 60, 90, 120 and 150 days. The moisture content, classification, weight loss, germination and internal infestation were evaluated monthly. Significant inverse correlations were verified between the number of insects and both the germination and the weight loss; also between the internal infestation and the germination and the standard type. The presence of S. zeamais showed a positive correlation with the weight loss, what means that the internal and external infestations contribute to the reduction of physiological and physical quality of corn seeds. The mean dry matter loss was 0,36%/day, corresponding to a consumption of 0,0001%/insect/month. As the result of those damages, the product suffered reduction of the commercial grade in 30 days, with significant loss in all quality factors.

The aldosterone-mineralocorticoid receptor pathway exerts anti-inflammatory effects in endotoxin-induced uveitis.

We have previously shown that the eye is a mineralocorticoid-sensitive organ and we now question the role of mineralocorticoid receptor (MR) in ocular inflammation. The endotoxin-induced uveitis (EIU), a rat model of human intraocular inflammation, was induced by systemic administration of lipopolysaccharide (LPS). Evaluations were made 6 and 24 hours after intraocular injection of aldosterone (simultaneous to LPS injection). Three hours after onset of EIU, the MR and the glucocorticoid metabolizing enzyme 11-beta hydroxysteroid dehydrogenase type 2 (11β-HSD2) expression were down-regulated in iris/ciliary body and the corticosterone concentration was increased in aqueous humor, altering the normal MR/glucocorticoid receptor (GR) balance. At 24 hours, the GR expression was also decreased. In EIU, aldosterone reduced the intensity of clinical inflammation in a dose-dependent manner. The clinical benefit of aldosterone was abrogated in the presence of the MR antagonist (RU26752) and only partially with the GR antagonist (RU38486). Aldosterone reduced the release of inflammatory mediators (6 and 24 hours: TNF-α, IFN-γ, MIP-1α) in aqueous humor and the number of activated microglia/macrophages. Aldosterone partly prevented the uveitis-induced MR down-regulation. These results suggest that MR expression and activation in iris/ciliary body could protect the ocular structures against damages induced by EIU.

Analysis of past and future dam formation and failure in the Santa Cruz River (San Juan province, Argentina)

Around 11.5 * 106 m3 of rock detached from the eastern slope of the Santa Cruz valley (San Juan province, Argentina) in the first fortnight of January 2005. The rockslide?debris avalanche blocked the course, resulting in the development of a lake with maximum length of around 3.5 km. The increase in the inflow rate from 47,000?74,000 m3/d between April and October to 304,000 m3/d between late October and the first fortnight of November, accelerated the growing rate of the lake. On 12 November 2005 the dam failed, releasing 24.6 * 106 m3 of water. The resulting outburst flood caused damages mainly on infrastructure, and affected the facilities of a hydropower dam which was under construction 250 km downstream from the source area. In this work we describe causes and consequences of the natural dam formation and failure, and we dynamically model the 2005 rockslide?debris avalanche with DAN3D. Additionally, as a volume ~ 24 * 106 m3of rocks still remain unstable in the slope, we use the results of the back analysis to forecast the formation of a future natural dam. We analyzed two potential scenarios: a partial slope failure of 6.5 * 106 m3 and a worst case where all the unstable volume remaining in the slope fails. The spreading of those potential events shows that a new blockage of the Santa Cruz River is likely to occur. According to their modeled morphometry and the contributing watershed upstream the blockage area, as the one of 2005, the dams would also be unstable. This study shows the importance of back and forward analysis that can be carried out to obtain critical information for land use planning, hazards mitigation, and emergency management.

Noctuidae moths occurring in grape orchards in Serra Gaúcha, Brazil and their relation to fruit-piercing

There is no study aiming to investigate if Noctuidae moths are responsible for piercing cultivated fruits in South America. This research aims to survey noctuid moths and list the species with mouth-parts (proboscis) morphology that suggest the capacity to cause damages to grape orchards in the state of Rio Grande do Sul, Brazil. Catches were carried out weekly from late November 2007 to late March 2008 (fructification period) using light traps and McPhail traps in three grape orchards in the region of Serra Gaúcha. The catches resulted in 187 taxa, with 149 identified at the specific level and 38 at genus level. The proboscises of representative taxa were removed and analyzed under stereomicroscope and scan electron microscope. It was verified that only Oraesia argyrosema (Hampson, 1926) and Gonodonta biarmata Guenée, 1852 show proboscis with suitable morphology for piercing rind and pulp of a grape berry. Achaea ablunaris (Guenée, 1852); Ascalapha odorata (Linnaeus, 1758); Letis mineis Geyer, 1827; Mocis latipes Hübner, 1823; Ophisma tropicalis Guenée, 1852, and Zale exhausta (Guenée, 1852) show proboscis only adapted to lacerate the pulp. The proboscis morphology of the remaining noctuid moths suggests lack of capacity to cause damage. Despite the presence of species capable of piercing grape berries, the populations of such species are very reduced and unable to cause damage of economic level.

Treating high blood pressure: is reaching the target more important than the means? No, the means are important.

All major antihypertensive drug classes i.e. diuretics, beta-blockers, calcium antagonists and blockers of the renin-angiotensin system have been shown to effectively lower blood pressure and hence to reduce cardiovascular outcomes in hypertensive patients. These drugs decrease cardiovascular complications in hypertension essentially because they reduce systemic blood pressure. Nevertheless, there is growing evidence that the extent of the benefits differed between drug classes suggesting that the various classes of antihypertensive agents are not equivalent in their ability to protect against target organ damages and cardiovascular and renal endpoints. More recently, evidence has also accumulated to demonstrate that even combination therapies are not equally effective in reducing the occurrence of cardiovascular complications in hypertension. These recent observations suggest that the means to lower blood pressure are as important as the achieved target blood pressure in the management of hypertensive patients.