Iowa State Rehabilitation Council 2003-2004 Annual Report

This Council was mandated by the 1992 Amendments to the Rehabilitation Act. Report includes mission, Council duties, accomplishments throughout the year, and member biographies.

Development of a Mix Design Process for Cold-in-Place Rehabilitation Using Foamed Asphalt, December 2005

Report by Iowa Department of Transportation about pavements materials.

Iowa Department of Education, Division of Vocational Rehabilitation, Notification Letter, April 14th, 2005

State Audit Reports

Réadaptation cardiovasculaire, un- bien sous-utilisé [Cardiac rehabilitation, a proven intervention underutilized in the French-speaking part of Switzerland].

Cardiac rehabilitation is associated with a reduced risk of recurrence and mortality after an acute coronary syndrome. Cardiac rehabilitation is a multidisciplinary approach which starts during the acute hospital phase, then followed by a four to six weeks home-based or stationary program, in order to maintain long-term lifestyle changes. Despite the important health benefits of cardiac rehabilitation and its cost-effectiveness, only half of the patients in Europe will achieve a cardiovascular prevention program after an acute coronary syndrome. In the French part of Switzerland, one explanation for this low adherence might be the lack of both stationary and home-based program facilities.

Iowa Vocational Rehabilitation Performance Report, FY 2005

Agency Performance Report

Iowa Vocational Rehabilitation Performance Report, FY 2004

Agency Performance Report

Iowa Vocational Rehabilitation Performance Report, FY 2005

Agency Performance Report

Wear of two artificial tooth materials in vivo: a 12-month pilot study.

STATEMENT OF PROBLEM: Wear of methacrylate artificial teeth resulting in vertical loss is a problem for both dentists and patients. PURPOSE: The purpose of this study was to quantify wear of artificial teeth in vivo and to relate it to subject and tooth variables. MATERIAL AND METHODS: Twenty-eight subjects treated with complete dentures received 2 artificial tooth materials (polymethyl methacrylate (PMMA)/double-cross linked PMMA fillers; 35%/59% (SR Antaris DCL, SR Postaris DCL); experimental 48%/46%). At baseline and after 12 months, impressions of the dentures were poured with improved stone. After laser scanning, the casts were superimposed and matched. Maximal vertical loss (mm) and volumetric loss (mm(3)) were calculated for each tooth and log-transformed to reduce variability. Volumetric loss was related to the occlusally active surface area. Linear mixed models were used to study the influence of the factors jaw, tooth, and material on adjusted (residual) wear values (alpha=.05). RESULTS: Due to drop outs (n=5) and unmatchable casts (n=3), 69% of all teeth were analyzed. Volumetric loss had a strong linear relationship to surface area (P<.001); this was less pronounced for vertical loss (P=.004). The factor showing the highest influence was the subject. Wear was tooth dependent (increasing from incisors to molars). However, these differences diminished once the wear rates were adjusted for occlusal area, and only a few remained significant (anterior versus posterior maxillary teeth). Another influencing factor was the age of the subject. CONCLUSIONS: Clinical wear of artificial teeth is higher than previously measured or expected. The presented method of analyzing wear of artificial teeth using a laser-scanning device seemed suitable.

Rehabilitation of Concrete Pavements Utilizing Rebblization and Crack and Seat Methods, June 2005

Deterioration in portland cement concrete (PCC) pavements can occur due to distresses caused by a combination of traffic loads and weather conditions. Hot mix asphalt (HMA) overlay is the most commonly used rehabilitation technique for such deteriorated PCC pavements. However, the performance of these HMA overlaid pavements is hindered due to the occurrence of reflective cracking, resulting in significant reduction of pavement serviceability. Various fractured slab techniques, including rubblization, crack and seat, and break and seat are used to minimize reflective cracking by reducing the slab action. However, the design of structural overlay thickness for cracked and seated and rubblized pavements is difficult as the resulting structure is neither a “true” rigid pavement nor a “true” flexible pavement. Existing design methodologies use the empirical procedures based on the AASHO Road Test conducted in 1961. But, the AASHO Road Test did not employ any fractured slab technique, and there are numerous limitations associated with extrapolating its results to HMA overlay thickness design for fractured PCC pavements. The main objective of this project is to develop a mechanistic-empirical (ME) design approach for the HMA overlay thickness design for fractured PCC pavements. In this design procedure, failure criteria such as the tensile strain at the bottom of HMA layer and the vertical compressive strain on the surface of subgrade are used to consider HMA fatigue and subgrade rutting, respectively. The developed ME design system is also implemented in a Visual Basic computer program. A partial validation of the design method with reference to an instrumented trial project (IA-141, Polk County) in Iowa is provided in this report. Tensile strain values at the bottom of the HMA layer collected from the FWD testing at this project site are in agreement with the results obtained from the developed computer program.

Measurements of three-dimensional glenoid erosion when planning the prosthetic replacement of osteoarthritic shoulders.

The three-dimensional (3D) correction of glenoid erosion is critical to the long-term success of total shoulder replacement (TSR). In order to characterise the 3D morphology of eroded glenoid surfaces, we looked for a set of morphological parameters useful for TSR planning. We defined a scapular coordinates system based on non-eroded bony landmarks. The maximum glenoid version was measured and specified in 3D by its orientation angle. Medialisation was considered relative to the spino-glenoid notch. We analysed regular CT scans of 19 normal (N) and 86 osteoarthritic (OA) scapulae. When the maximum version of OA shoulders was higher than 10°, the orientation was not only posterior, but extended in postero-superior (35%), postero-inferior (6%) and anterior sectors (4%). The medialisation of the glenoid was higher in OA than normal shoulders. The orientation angle of maximum version appeared as a critical parameter to specify the glenoid shape in 3D. It will be very useful in planning the best position for the glenoid in TSR.

Rehabilitation outcomes for orthopaedic trauma individuals as measured by the INTERMED.

PURPOSE: Bio-psychosocial characteristics of patients after orthopaedic traumas may be a strong predictor of poor outcome. The objective of this prospective study was to assess whether the INTERMED, a measure of bio-psychosocial complexity, identifies complex inpatients during rehabilitation including vocational aspects with a poor outcome 1 year after discharge. METHOD: At entry, the INTERMED scores of 118 inpatients were used to assign patients to the high or low complexity group. A questionnaire evaluated 1 year after discharge whether patients: (1) returned to work, (2) still have therapies, (3) take psychoactive drugs, (4) take medication against pain and (5) were satisfied with vocational therapy. Univariate logistic regressions identified which variables predict INTERMED case complexity during hospitalisation as well as predictors (i.e. INTERMED case complexity, French as preferred language, duration of the disability, accident at work, work qualification, severity of the injury, psychiatric co-morbidities, pain) of the five measured outcomes 1 year after discharge. RESULTS: During hospitalisation, the high complexity group was associated with a high prevalence of psychiatric co-morbidities, a higher level of pain and a weaker perception of treatment effects. One year after discharge, the INTERMED was the sole variable to predict all outcomes. CONCLUSION: The INTERMED identifies complex patients during vocational rehabilitation after orthopaedic trauma and is a good predictor of poor outcome 1 year after discharge.

Iowa State Rehabilitation Council Annual Report 2005-2006, December 31, 2007

Annual Report for Iowa Vocational Rehabilitation Services (IVRS), a division of the Iowa Department of Education, is committed to working for and with individuals who have disabilities to achieve their employment, independence and economic goals. This document contains information highlighting the accomplishments of IVRS this year.