Fundamental domains for proper affine actions of Coxeter groups in three dimensions

We study proper actions of groups $G \cong \Z/2\Z \ast \Z/2\Z \ast \Z/2\Z$ on affine space of three real dimensions. Since $G$ is nonsolvable, work of Fried and Goldman implies that it preserves a Lorentzian metric. A subgroup $\Gamma < G$ of index two acts freely, and $\R^3/\Gamma$ is a Margulis spacetime associated to a hyperbolic surface $\Sigma$. When $\Sigma$ is convex cocompact, work of Danciger, Gu{\'e}ritaud, and Kassel shows that the action of $\Gamma$ admits a polyhedral fundamental domain bounded by crooked planes. We consider under what circumstances the action of $G$ also admits a crooked fundamental domain. We show that it is possible to construct actions of $G$ that fail to admit crooked fundamental domains exactly when the extended mapping class group of $\Sigma$ fails to act transitively on the top-dimensional simplices of the arc complex of $\Sigma$. We also provide explicit descriptions of the moduli space of $G$ actions that admit crooked fundamental domains.

Proper holding temperatures

Proper holding temperatures will ensure that Time/Temperature Control for Safety foods are not in the temperature danger zone (between 45°F and 130°F) while food items are held for further preparation and/or consumption. Hot foods must be maintained at or above 130°F. Cold foods must be maintained at or below 45°F. It also contains a holding temperature log template for use in restaurants.

Proper cooling temperatures

Proper cooling temperatures will prevent microbial growth by helping limit the time that food is exposed to the temperature danger zone. After cooking or heating, Time/Temperature for Safety (TCS) foods must be cooled quickly: From 130°F to 70°F within 2 hours, and From 70°F to 45°F within 4 hours. This sheet also contains a rapid cooling temperature log template.

A supervised machine learning method for word sense disambiguation of Portuguese nouns

Dissertação de Mestrado, Ciências da Linguagem, Faculdade de Ciências Humanas e Sociais, Universidade do Algarve, 2010

Delays In Receiving Obstetric Care And Poor Maternal Outcomes: Results From A National Multicentre Cross-sectional Study.

The vast majority of maternal deaths in low-and middle-income countries are preventable. Delay in obtaining access to appropriate health care is a fairly common problem which can be improved. The objective of this study was to explore the association between delay in providing obstetric health care and severe maternal morbidity/death. This was a multicentre cross-sectional study, involving 27 referral obstetric facilities in all Brazilian regions between 2009 and 2010. All women admitted to the hospital with a pregnancy-related cause were screened, searching for potentially life-threatening conditions (PLTC), maternal death (MD) and maternal near-miss (MNM) cases, according to the WHO criteria. Data on delays were collected by medical chart review and interview with the medical staff. The prevalence of the three different types of delays was estimated according to the level of care and outcome of the complication. For factors associated with any delay, the PR and 95%CI controlled for cluster design were estimated. A total of 82,144 live births were screened, with 9,555 PLTC, MNM or MD cases prospectively identified. Overall, any type of delay was observed in 53.8% of cases; delay related to user factors was observed in 10.2%, 34.6% of delays were related to health service accessibility and 25.7% were related to quality of medical care. The occurrence of any delay was associated with increasing severity of maternal outcome: 52% in PLTC, 68.4% in MNM and 84.1% in MD. Although this was not a population-based study and the results could not be generalized, there was a very clear and significant association between frequency of delay and severity of outcome, suggesting that timely and proper management are related to survival.

Otorhinolaryngological Findings In A Group Of Patients With Rheumatic Diseases.

Otorhinolaryngological manifestations of rheumatologic diseases represent a great challenge not only to the generalistphysician but also to the ENT doctor andrheumatologist. They often represent early manifestations of an autoimmune disorder which requires prompt and aggressive immunosuppressive treatment. Auditory, nasal, laryngeal and eye symptoms can be the first manifestation of rheumatic diseases and their proper assessment helps the doctor to identify signs of disease activity. The objective of this study is to identify the ENT manifestations in patients with rheumatic diseases in a high complexity hospital, regarding facilitating an early diagnosis and treatment. We performed clinical and complete otorhinolaryngological evaluations in patients selected from the outpatient rheumatology in a standardized manner by the use of a standardized form filling during the secondhalf of 2010. In the study group, systemic lupus erythematosus (SLE) patients had predominantly laryngeal manifestations, while patients with Sjögren's syndrome showed a higher prevalence of otologic manifestations. Changes in audiometric tests were found in 53% of Wegener's granulomatosis (WG) patients, 80% of relapsing polychondritis (RP), 33% of systemic lupus erythematosus (SLE) and 50% of Churg-Strauss syndrome (SCS). Regarding nasal alterations, these were found so prevalent in all conditions, especially Churg-Strauss syndrome. This study demonstrated that most patients treated in our hospital has the ENT signs and symptoms commonly associated in previous studies on rheumatic diseases, but further studies with a larger number of patients must be made to establish such relations.

Direct Adhesive Pin-retained Restorations For Severely Worn Dentition Treatment: A 1.5-year Follow-up Report.

Excessive occlusal surface wear can result in occlusal disharmony, functional and esthetic impairment. As a therapeutic approach, conventional single crowns have been proposed, but this kind of treatment is complex, highly invasive and expensive. This case report describes the clinical outcomes of an alternative minimally invasive treatment based on direct adhesive-pin retained restorations. A 64-year-old woman with severely worn dentition, eating problems related to missing teeth and generalized tooth hypersensitivity was referred for treatment. Proper treatment planning based on the diagnostic wax-up simulation was used to guide the reconstruction of maxillary anterior teeth with direct composite resin over self-threading dentin pins. As the mandibular remaining teeth were extremely worn, a tooth-supported overdenture was installed. A stabilization splint was also used to protect the restorations. This treatment was a less expensive alternative to full-mouth rehabilitation with positive esthetic and functional outcomes after 1.5 years of follow-up.

Sci1 Is A Component Of The Auxin-dependent Control Of Cell Proliferation In Arabidopsis Upper Pistil.

To characterize the recently described SCI1 (stigma/style cell cycle inhibitor 1) gene relationship with the auxin pathway, we have taken the advantage of the Arabidopsis model system and its available tools. At first, we have analyzed the At1g79200 T-DNA insertion mutants and constructed various transgenic plants. The loss- and gain-of-function plants displayed cell number alterations in upper pistils that were controlled by the amino-terminal domain of the protein. These data also confirmed that this locus holds the functional homolog (AtSCI1) of the Nicotiana tabacum SCI1 gene. Then, we have provided some evidences the auxin synthesis/signaling pathways are required for downstream proper AtSCI1 control of cell number: (a) its expression is downregulated in yuc2yuc6 and npy1 auxin-deficient mutants, (b) triple (yuc2yuc6sci1) and double (npy1sci1) mutants mimicked the auxin-deficient phenotypes, with no synergistic interactions, and (c) the increased upper pistil phenotype in these last mutants, which is a consequence of an increased cell number, was able to be complemented by AtSCI1 overexpression. Taken together, our data strongly suggests SCI1 as a component of the auxin signaling transduction pathway to control cell proliferation/differentiation in stigma/style, representing a molecular effector of this hormone on pistil development.

Strain Gauges's Analysis On Implant-retained Prosthesis' Cast Accuracy.

A proper cast is essential for a successful rehabilitation with implant prostheses, in order to produce better structures and induce less strain on the implants. The aim of this study was to evaluate the precision of four different mold filling techniques and verify an accurate methodology to evaluate these techniques. A total of 40 casts were obtained from a metallic matrix simulating three unit implant-retained prostheses. The molds were filled using four different techniques in four groups (n = 10): Group 1 - Single-portion filling technique; Group 2 - Two-step filling technique; Group 3 - Latex cylinder technique; Group 4 - Joining the implant analogs previously to the mold filling. A titanium framework was obtained and used as a reference to evaluate the marginal misfit and tension forces in each cast. Vertical misfit was measured with an optical microscope with an increase of 120 times following the single-screw test protocol. Strain was quantified using strain gauges. Data were analyzed using one-way ANOVA (Tukey's test) (α =0.05). The correlation between strain and vertical misfit was evaluated by Pearson test. The misfit values did not present statistical difference (P = 0.979), while the strain results showed statistical difference between Groups 3 and 4 (P = 0.027). The splinting technique was considered to be as efficient as the conventional technique. The strain gauge methodology was accurate for strain measurements and cast distortion evaluation. There was no correlation between strain and marginal misfit.

Monte Carlo Simulation Of The Response Functions Of Cdte Detectors To Be Applied In X-ray Spectroscopy.

In this work, the energy response functions of a CdTe detector were obtained by Monte Carlo (MC) simulation in the energy range from 5 to 160keV, using the PENELOPE code. In the response calculations the carrier transport features and the detector resolution were included. The computed energy response function was validated through comparison with experimental results obtained with (241)Am and (152)Eu sources. In order to investigate the influence of the correction by the detector response at diagnostic energy range, x-ray spectra were measured using a CdTe detector (model XR-100T, Amptek), and then corrected by the energy response of the detector using the stripping procedure. Results showed that the CdTe exhibits good energy response at low energies (below 40keV), showing only small distortions on the measured spectra. For energies below about 80keV, the contribution of the escape of Cd- and Te-K x-rays produce significant distortions on the measured x-ray spectra. For higher energies, the most important correction is the detector efficiency and the carrier trapping effects. The results showed that, after correction by the energy response, the measured spectra are in good agreement with those provided by a theoretical model of the literature. Finally, our results showed that the detailed knowledge of the response function and a proper correction procedure are fundamental for achieving more accurate spectra from which quality parameters (i.e., half-value layer and homogeneity coefficient) can be determined.

Determination Of The Phenolic Composition From Brazilian Tropical Fruits By Uhplc-ms/ms.

Although Brazil is the third largest fruit producer in the world, several specimens consumed are not well studied from the chemical viewpoint, especially for quantitative analysis. For this reason and the crescent employment of mass spectrometry (MS) techniques in food science we selected twenty-two phenolic compounds with important biological activities and developed an ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) method using electrospray (ESI) in negative ion mode aiming their quantification in largely consumed Brazilian fruits (açaí-do-Amazonas, acerola, cashew apple, camu-camu, pineapple and taperebá). Multiple reaction monitoring (MRM) was applied and the selection of proper product ions for each transition assured high selectivity. Linearity (0.99580%), precision (CV<20%) and extraction recovery rate (>80%) were satisfactory and showed that the method provides an efficient protocol to analyze phenolic compounds in fruit pulp extracts.

Sistematização do dimensionamento técnico e econômico de sistemas fotovoltaicos isolados por meio de programa computacional

One of the main referring subjects to the solar energy is how to compare it economically with other sources of energy, as much alternatives as with conventionals (like the electric grid). The purpose of this work was to develop a software which congregates the technical and economic main data to identify, through methods of microeconomic analysis, the commercial viability in the sizing of photovoltaic systems, besides considering the benefits proceeding from the proper energy generation. Considering the period of useful life of the components of the generation system of photovoltaic electricity, the costs of the energy proceeding from the conventional grid had been identified. For the comparison of the conventional sources, electric grid and diesel generation, three scenes of costs of photovoltaic panels and two for the factor of availability of diesel generation had been used. The results have shown that if the cost of the panels is low and the place of installation is more distant of the electric grid, the photovoltaic system becomes the best option.

Filtros de areia aplicados à irrigação localizada: teoria e prática

The application of sand filters in localized irrigation systems is recommended in the presence of organic and algae contamination. The proper design and maintenance of these equipments are essential to assure an effective water quality control, in order to reduce the emitters clogging, to keep its water application uniformity, and to prevent increasing in the system operation costs. Despite the existence of some references about design, operation and maintenance of these filters, they are dispersed, with not enough details to guarantee the optimization of its hydraulics structure design and the proper selection of porous media to be used. Therefore, the objective of this work was to report a current literature review, relating practical information with scientific knowledge. The content of this review would help to induce and intensify the research on this subject and to contribute so the operational functions for the equipment are reached. It is also expected to assist the improvement of the filtration and flushing processes in the agricultural irrigation and the development of original design procedures and the rational use of these devices.

As vozes da sociedade: letramento, consciência e poder

The dialectic tension between the phenomenon of illiteracy and the remedial efforts of the literate to provide a voice for those who don t have one, reflects at the same time the difficulties that the emerging discourses have to struggle with, and highlights the importance of this struggle as one that belongs to the opressed, not the well-meaning educators and political activists. It also informs the latter s efforts on behalf of the uneducated. Naturally these issues have attracted a good deal of attention of some specialists in South America. There is now a movement afoot there that aims at placing illiterate discourse inside the societal discourse proper without letting the latter manipulate the former for its own ends. I will address the typical exigencies and limitations inherent in such efforts, but at the same time point to new ways of understanding and handling the problem of literacy in a developing country.