IQ in children with autism spectrum disorders: data from the Special Needs and Autism Project (SNAP)

Background Autism spectrum disorder (ASD) was once considered to be highly associated with intellectual disability and to show a characteristic IQ profile, with strengths in performance over verbal abilities and a distinctive pattern of ‘peaks’ and ‘troughs’ at the subtest level. However, there are few data from epidemiological studies. Method Comprehensive clinical assessments were conducted with 156 children aged 10–14 years [mean (s.d.)=11.7 (0.9)], seen as part of an epidemiological study (81 childhood autism, 75 other ASD). A sample weighting procedure enabled us to estimate characteristics of the total ASD population. Results Of the 75 children with ASD, 55% had an intellectual disability (IQ<70) but only 16% had moderate to severe intellectual disability (IQ<50); 28% had average intelligence (115>IQ>85) but only 3% were of above average intelligence (IQ>115). There was some evidence for a clinically significant Performance/Verbal IQ (PIQ/VIQ) discrepancy but discrepant verbal versus performance skills were not associated with a particular pattern of symptoms, as has been reported previously. There was mixed evidence of a characteristic subtest profile: whereas some previously reported patterns were supported (e.g. poor Comprehension), others were not (e.g. no ‘peak’ in Block Design). Adaptive skills were significantly lower than IQ and were associated with severity of early social impairment and also IQ. Conclusions In this epidemiological sample, ASD was less strongly associated with intellectual disability than traditionally held and there was only limited evidence of a distinctive IQ profile. Adaptive outcome was significantly impaired even for those children of average intelligence.

Operator performance evaluation of controlled depth of field in a stereographically displayed virtual environment

Retinal blurring resulting from the human eye's depth of focus has been shown to assist visual perception. Infinite focal depth within stereoscopically displayed virtual environments may cause undesirable effects, for instance, objects positioned at a distance in front of or behind the observer's fixation point will be perceived in sharp focus with large disparities thereby causing diplopia. Although published research on incorporation of synthetically generated Depth of Field (DoF) suggests that this might act as an enhancement to perceived image quality, no quantitative testimonies of perceptional performance gains exist. This may be due to the difficulty of dynamic generation of synthetic DoF where focal distance is actively linked to fixation distance. In this paper, such a system is described. A desktop stereographic display is used to project a virtual scene in which synthetically generated DoF is actively controlled from vergence-derived distance. A performance evaluation experiment on this system which involved subjects carrying out observations in a spatially complex virtual environment was undertaken. The virtual environment consisted of components interconnected by pipes on a distractive background. The subject was tasked with making an observation based on the connectivity of the components. The effects of focal depth variation in static and actively controlled focal distance conditions were investigated. The results and analysis are presented which show that performance gains may be achieved by addition of synthetic DoF. The merits of the application of synthetic DoF are discussed.

The ERA-Interim reanalysis: configuration and performance of the data assimilation system

ERA-Interim is the latest global atmospheric reanalysis produced by the European Centre for Medium-Range Weather Forecasts (ECMWF). The ERA-Interim project was conducted in part to prepare for a new atmospheric reanalysis to replace ERA-40, which will extend back to the early part of the twentieth century. This article describes the forecast model, data assimilation method, and input datasets used to produce ERA-Interim, and discusses the performance of the system. Special emphasis is placed on various difficulties encountered in the production of ERA-40, including the representation of the hydrological cycle, the quality of the stratospheric circulation, and the consistency in time of the reanalysed fields. We provide evidence for substantial improvements in each of these aspects. We also identify areas where further work is needed and describe opportunities and objectives for future reanalysis projects at ECMWF

Everything and nothing project

An EPRSC ‘Partnerships for Public Engagement’ scheme 2010. FEC 122,545.56/UoR 10K everything and nothing is a performance and workshop which engages the public creatively with mathematical concepts: the Poincare conjecture, the shape of the universe, topology, and the nature of infinity are explored through an original, thought provoking piece of music theatre. Jorge Luis Borges' short story 'The Library of Babel' and the aviator Amelia Earhart’s attempt to circumnavigate the globe combine to communicate to audience key mathematical concepts of Poincare’s conjecture. The project builds on a 2008 EPSRC early development project (EP/G001650/1) and is led by an interdisciplinary team the19thstep consisting of composer Dorothy Ker, sculptor Kate Allen and mathematician Marcus du Sautoy. everything and nothing has been devised by Dorothy Ker and Kate Allen, is performed by percussionist Chris Brannick, mezzo soprano Lucy Stevens and sound designer Kelcey Swain. The UK tour targets arts-going audiences, from the Green Man Festival to the British Science Festival. Each performance is accompanied with a workshop led by Topologist Katie Steckles. Alongside the performances and workshops is a website, http://www.everythingandnothingproject.com/ The Public engagement evaluation and monitoring for the project are carried out by evaluator Bea Jefferson. The project is significant in its timely relation to contemporary mathematics and arts-science themes delivering an extensive programme of public engagement.

Performance as social practice

Starting point for these outputs is a large scale research project in collaboration with the Zurich University for the Arts and the Kunstmuseum Thun, looking at a redefinition of Social Sculpture (Joseph Beuys/ Bazon Brock, 1970) as a functional device re-deployed to expand the art discourse into a societal discourse. Although Beuys‘ version of a social sculpture involved notions of abstruse mysticism and reformulations of a national identity these were never-the less part of a social transformation that shifted and re-arranged power relations. Following Laclau and Mouffe in their contention that democray is a fundamentally antagonistic process and contesting Grant Kester’s understanding of a ethically based relational practice, this work is alignes itself with Hirschhorn’s claim to an aesthetic practice within communities, following the possibility to view a socially based practice from both ends of the ethics debate, whereby ethical aspects fuels the aethetic to “create situations that are beautiful because they are ethical and shocking because they are ethical, thus in turn aesthetic because they are ethical” (O’Donnell). This project sets out to engage in activities which interact with surrounding communities and evoce new imaginations of site, thereby understanding site as a catalysts for subjective emergences. Performance is tested as a site for social practice. Archival research into local audio/visual resources, such as the Swiss Radio Archive, the Swiss Military Film Archives and zoological film archives of the Basel Zoo, was instrumental to the navigation of this work, under theme of crisis, catastrophy, landscape, fallout, in order to create a visual language for an active performance site. Commissioned by the Kunstmuseum Thun in collaboration with the University for the Arts in Zurich as part of a year long exhibition programme, (other artists are Jeanne Van Heeswijk (NL) and San Keller (CH), ) this project brings together a series of different works in a new performace installation. The performance process includes a performance workshop with 30 school children from local Swiss schools and their teachers, which was conducted publicly in the museum spaces. It enabled the children to engage with an unexpected set of tribal and animalistic behaviours, looking at situations of flight and rescue, resulting in a large performance choreography orchestration without an apparent conductor, it includes a collaboration with renowned Swiss zoologist, Prof Klaus Zuberbühler(University of St Andrews) and the Colonal General Haldimann commander of the military base in Thun. The installation included 2 static video images, shot in an around spectacular local cave site (Beatus Caves) including 3 children. The project will culminate in an edited edition of the Oncurating Journal, (issue no, tbc, in 2012) including interviews and essays from project collaborators. (Army Commander General, Thun, Jörg Hess, performance script, Timothy Long, and others)

Instructions for an Audio Performance/Scissors Music

‘Instructions for an Audio Performance/Scissors Recording’ is a score for a performance using an amplified scissors that can be downloaded and interpreted by a performer anywhere in the world. The file functions as a manual for the performer with guidance for creating the instrument and preparing the performance space while it also provides a template for the actual sonic pattern to be followed in the live performance. Created originally for ‘Storageroom’ an online platform featuring complete exhibitions that are available for download, the piece was exhibited and interpreted in a live performance by Ayelet Lerman for the File Transfer Protocol, the contemporary section of the Haifa-Jerusalem-Tel Aviv exhibition at the Museum of Art, Haifa, Israel.

The design of a semantics-oriented organisational performance measurement system

Current methods and techniques used in designing organisational performance measurement systems do not consider the multiple aspects of business processes or the semantics of data generated during the lifecycle of a product. In this paper, we propose an organisational performance measurement systems design model that is based on the semantics of an organisation, business process and products lifecycle. Organisational performance measurement is examined from academic and practice disciplines. The multi-discipline approach is used as a research tool to explore the weaknesses of current models that are used to design organisational performance measurement systems. This helped in identifying the gaps in research and practice concerning the issues and challenges in designing information systems for measuring the performance of an organisation. The knowledge sources investigated include on-going and completed research project reports; scientific and management literature; and practitioners’ magazines.

The GCM–Reality Intercomparison Project for SPARC (GRIPS): scientific issues and initial results

To investigate the effects of the middle atmosphere on climate, the World Climate Research Programme is supporting the project "Stratospheric Processes and their Role in Climate" (SPARC). A central theme of SPARC, to examine model simulations of the coupled troposphere—middle atmosphere system, is being performed through the initiative called GRIPS (GCM—Reality Intercomparison Project for SPARC). In this paper, an overview of the objectives of GRIPS is given. Initial activities include an assessment of the performance of middle atmosphere climate models, and preliminary results from this evaluation are presented here. It is shown that although all 13 models evaluated represent most major features of the mean atmospheric state, there are deficiencies in the magnitude and location of the features, which cannot easily be traced to the formulation (resolution or the parameterizations included) of the models. Most models show a cold bias in all locations, apart from the tropical tropopause region where they can be either too warm or too cold. The strengths and locations of the major jets are often misrepresented in the models. Looking at three—dimensional fields reveals, for some models, more severe deficiencies in the magnitude and positioning of the dominant structures (such as the Aleutian high in the stratosphere), although undersampling might explain some of these differences from observations. All the models have shortcomings in their simulations of the present—day climate, which might limit the accuracy of predictions of the climate response to ozone change and other anomalous forcing.

Performance-based contracting in the construction sector

Construction procurement is complex and there is a very wide range of options available to procurers. Inappropriate choices about how to procure may limit practical opportunities for innovation. In particular, traditional approaches to construction procurement set up many obstacles for technology suppliers to provide innovative solutions. This is because they are often employed as sub-contractors simply to provide and install equipment to specifications developed before the point at which they become involved in a project. A research team at the University of Reading has developed a procurement framework that comprehensively defines the various options open to procurers in a more fine-grained way than has been known in the past. This enables informed decisions that can establish tailor-made procurement approaches that take into account the needs of specific clients. It enables risk and reward structures to be aligned so that contracts and payment mechanisms are aligned precisely with what a client seeks to achieve. This is not a “one-size-fits-all” approach. Rather, it is an approach that enables informed decisions about how to organize individual procurements that are appropriate to particular circumstances, acknowledging that they differ for each client and for each procurement exercise. Within this context, performance-based contracting (PBC) is explored in terms of the different ways in which technology suppliers within constructed facilities might be encouraged and rewarded for the kinds of innovation sought by the ultimate clients. Examples from various industry sectors are presented, from public sector and from private sector, with a commentary about what they sought to achieve and the extent to which they were successful. The lessons from these examples are presented in terms of feasibility in relation to financial issues, governance, economics, strategic issues, contractual issues and cash flow issues for clients and for contractors. Further background documents and more detailed readings are provided in an appendix for those who wish to find out more.

Application of dried blood spots to determine vitamin D status in a large nutritional study with unsupervised sampling: the Food4Me project

An efficient and robust method to measure vitamin D (25-hydroxy vitamin D3 (25(OH)D3) and 25-hydroxy vitamin D2 in dried blood spots (DBS) has been developed and applied in the pan-European multi-centre, internet-based, personalised nutrition intervention study Food4Me. The method includes calibration with blood containing endogenous 25(OH)D3, spotted as DBS and corrected for haematocrit content. The methodology was validated following international standards. The performance characteristics did not reach those of the current gold standard liquid chromatography-MS/MS in plasma for all parameters, but were found to be very suitable for status-level determination under field conditions. DBS sample quality was very high, and 3778 measurements of 25(OH)D3 were obtained from 1465 participants. The study centre and the season within the study centre were very good predictors of 25(OH)D3 levels (P<0·001 for each case). Seasonal effects were modelled by fitting a sine function with a minimum 25(OH)D3 level on 20 January and a maximum on 21 July. The seasonal amplitude varied from centre to centre. The largest difference between winter and summer levels was found in Germany and the smallest in Poland. The model was cross-validated to determine the consistency of the predictions and the performance of the DBS method. The Pearson's correlation between the measured values and the predicted values was r 0·65, and the sd of their differences was 21·2 nmol/l. This includes the analytical variation and the biological variation within subjects. Overall, DBS obtained by unsupervised sampling of the participants at home was a viable methodology for obtaining vitamin D status information in a large nutritional study.

High performance polyester-based materials

Biaxially oriented films produced from semi-crystalline, semi-aromatic polyesters are utilised extensively as components within various applications, including the specialist packaging, flexible electronic and photovoltaic markets. However, the thermal performance of such polyesters, specifically poly(ethylene terephthalate) (PET) and poly(ethylene-2,6-naphthalate) (PEN), is inadequate for several applications that require greater dimensional stability at higher operating temperatures. The work described in this project is therefore primarily focussed upon the copolymerisation of rigid comonomers with PET and PEN, in order to produce novel polyester-based materials that exhibit superior thermomechanical performance, with retention of crystallinity, to achieve biaxial orientation. Rigid biphenyldiimide comonomers were readily incorporated into PEN and poly(butylene-2,6-naphthalate) (PBN) via a melt-polycondensation route. For each copoly(ester-imide) series, retention of semi-crystalline behaviour is observed throughout entire copolymer composition ratios. This phenomenon may be rationalised by cocrystallisation between isomorphic biphenyldiimide and naphthalenedicarboxylate residues, which enables statistically random copolymers to melt-crystallise despite high proportions of imide sub-units being present. In terms of thermal performance, the glass transition temperature, Tg, linearly increases with imide comonomer content for both series. This facilitated the production of several high performance PEN-based biaxially oriented films, which displayed analogous drawing, barrier and optical properties to PEN. Selected PBN copoly(ester-imide)s also possess the ability to either melt-crystallise, or form a mesophase from the isotropic state depending on the applied cooling rate. An equivalent synthetic approach based upon isomorphic comonomer crystallisation was subsequently applied to PET by copolymerisation with rigid diimide and Kevlar®-type amide comonomers, to afford several novel high performance PET-based copoly(ester-imide)s and copoly(ester-amide)s that all exhibited increased Tgs. Retention of crystallinity was achieved in these copolymers by either melt-crystallisation or thermal annealing. The initial production of a semi-crystalline, PET-based biaxially oriented film with a Tg in excess of 100 °C was successful, and this material has obvious scope for further industrial scale-up and process development.

Estimating future bidding performance of competitor bidders in capped tenders

Research in Bid Tender Forecasting Models (BTFM) has been in progress since the 1950s. None of the developed models were easy-to-use tools for effective use by bidding practitioners because the advanced mathematical apparatus and massive data inputs required. This scenario began to change in 2012 with the development of the Smartbid BTFM, a quite simple model that presents a series of graphs that enables any project manager to study competitors using a relatively short historical tender dataset. However, despite the advantages of this new model, so far, it is still necessary to study all the auction participants as an indivisible group; that is, the original BTFM was not devised for analyzing the behavior of a single bidding competitor or a subgroup of them. The present paper tries to solve that flaw and presents a stand-alone methodology useful for estimating future competitors’ bidding behaviors separately.

The Climate-system Historical Forecast Project: do stratosphere-resolving models make better seasonal climate predictions in boreal winter?

Using an international, multi-model suite of historical forecasts from the World Climate Research Programme (WCRP) Climate-system Historical Forecast Project (CHFP), we compare the seasonal prediction skill in boreal wintertime between models that resolve the stratosphere and its dynamics (“high-top”) and models that do not (“low-top”). We evaluate hindcasts that are initialized in November, and examine the model biases in the stratosphere and how they relate to boreal wintertime (Dec-Mar) seasonal forecast skill. We are unable to detect more skill in the high-top ensemble-mean than the low-top ensemble-mean in forecasting the wintertime North Atlantic Oscillation, but model performance varies widely. Increasing the ensemble size clearly increases the skill for a given model. We then examine two major processes involving stratosphere-troposphere interactions (the El Niño-Southern Oscillation/ENSO and the Quasi-biennial Oscillation/QBO) and how they relate to predictive skill on intra-seasonal to seasonal timescales, particularly over the North Atlantic and Eurasia regions. High-top models tend to have a more realistic stratospheric response to El Niño and the QBO compared to low-top models. Enhanced conditional wintertime skill over high-latitudes and the North Atlantic region during winters with El Niño conditions suggests a possible role for a stratospheric pathway.

Measuring Application Availability,Usage and Performance : Implementation of EnView System

The main objective for this degree project is to implement an Application Availability Monitoring (AAM) system named Softek EnView for Fujitsu Services. The aim of implementing the AAM system is to proactively identify end user performance problems, such as application and site performance, before the actual end users experience them. No matter how well applications and sites are designed and nomatter how well they meet business requirements, they are useless to the end users if the performance is slow and/or unreliable. It is important for the customers to find out whether the end user problems are caused by the network or application malfunction. The Softek EnView was comprised of the following EnView components: Robot, Monitor, Reporter, Collector and Repository. The implemented system, however, is designed to use only some of these EnView elements: Robot, Reporter and depository. Robots can be placed at any key user location and are dedicated to customers, which means that when the number of customers increases, at the sametime the amount of Robots will increase. To make the AAM system ideal for the company to use, it was integrated with Fujitsu Services’ centralised monitoring system, BMC PATROL Enterprise Manager (PEM). That was actually the reason for deciding to drop the EnView Monitor element. After the system was fully implemented, the AAM system was ready for production. Transactions were (and are) written and deployed on Robots to simulate typical end user actions. These transactions are configured to run with certain intervals, which are defined collectively with customers. While they are driven against customers’ applicationsautomatically, transactions collect availability data and response time data all the time. In case of a failure in transactions, the robot immediately quits the transactionand writes detailed information to a log file about what went wrong and which element failed while going through an application. Then an alert is generated by a BMC PATROL Agent based on this data and is sent to the BMC PEM. Fujitsu Services’ monitoring room receives the alert, reacts to it according to the incident management process in ITIL and by alerting system specialists on critical incidents to resolve problems. As a result of the data gathered by the Robots, weekly reports, which contain detailed statistics and trend analyses of ongoing quality of IT services, is provided for the Customers.