Florescimento e frutificação do maracujazeiro silvestre Passiflora setacea D. C. cultivado em Jaboticabal, SP

Muitas espécies de Passiflora apresentam comportamento florífero diferente durante o ano e, consequentemente, com variações nas produções e períodos de colheitas, como observado para o maracujazeiro-amarelo (Passiflora edulis sims). Estudo com espécies silvestre constitui-se numa importante alternativa para usos de novos genótipos no melhoramento das espécies cultivadas comercialmente, em especial, a Passiflora setacea, devido ao grande potencial de mercado; contudo, essa espécie é pouco estudada, principalmente em relação à propagação, germinação, floração e condições de armazenamento. Assim, o objetivo deste trabalho foi avaliar o florescimento e a frutificação do maracujazeiro silvestre Passiflora setacea cultivado em Jaboticabal-SP. A floração e a frutificação foram avaliadas pelo percentual de frutificação através da polinização natural e artificial das flores, realizado no período de agosto a outubro. As características físicas dos frutos foram avaliadas através dos seguintes parâmetros: a) massa do fruto (g); b) diâmetro longitudinal do fruto (cm); c) diâmetro transversal do fruto (cm); d) espessura da casca (cm); e) rendimento de polpa (%). A característica química foi determinada por meio do teor de sólidos solúveis (SS). Verificou-se que a Passiflora setacea apresentou precocidade de floração em relação ao maracujazeiro-amarelo, com florescimento durante o ano todo, nas condições de Jaboticabal-SP. Observou-se que essa espécie possui bom nível de tolerância às doenças foliares, resistência à morte precoce e apresenta diferentes níveis de compatibilidade entre as plantas, possibilitando a essas características serem utilizadas em programas de melhoramento genético. Constatou-se ainda que as características físicas encontradas nos frutos atendem às exigências da indústria.

Reconstrução do L.C.P. do joelho: técnica de fixação no leito tibial (INLAY). Avaliação objetiva e subjetiva de 30 casos

A reconstrução cirúrgica do ligamento cruzado posterior (L.C.P.) do joelho ainda permanece como um grande desafio terapêutico. Neste trabalho avaliamos 30 pacientes submetidos à reconstrução cirúrgica do L.C.P. com a técnica de fixação do enxerto tendíneo no leito tibial por abordagem direta (INLAY). 28 pacientes eram do sexo masculino e 2 do feminino, com idade média de 31,10 anos. O tempo médio de lesão foi de 34,24 meses em 67% dos casos a lesão foi secundária a acidente motociclístico. As lesões condrais e do ligamento cruzado anterior (L.C.A.) do joelho estavam presentes em 67% e 33% dos casos, respectivamente. Os pacientes foram avaliados objetivamente (teste de gaveta posterior) e subjetivamente (Escala de Lysholm). O seguimento pós-operatório médio foi de 21,7 meses. Cerca de 66% dos casos foram classificados como bom e excelente na avaliação subjetiva e objetiva. A análise estatística apresentou comportamento semelhante para as duas avaliações.Os resultados clínicos pós-operatórios obtidos neste trabalho têm nos encorajado a seguir com esta técnica cirúrgica.

Tratamento cirúrgico da fratura-avulsão da inserção tibial do L.C.P. do joelho: experiência de 21 casos

Avaliamos 21 pacientes, sendo 16 pacientes do sexo masculino e 5 do feminino, com idade média de 30 anos, foram submetidos à tratamento cirúrgico da fratura-avulsão do LCP. em 57% dos casos a lesão foi secundária a acidente motociclístico e 19% a acidente automobilístico. em 72% dos casos foi identificada uma lesão na face anterior do joelho. O tratamento cirúrgico consistiu na abordagem posterior do joelho e fixação do fragmento ósseo com parafuso e arruela em 18 casos; e amarrilhas trans-ósseas em 3 casos, onde o fragmento ósseo era muito pequeno. em 91% dos casos, a cirurgia foi realizada dentro dos primeiros 15 dias apos a lesão. Os pacientes foram avaliados objetivamente (teste de gaveta posterior) e subjetivamente (Escala de Lysholm), apos um seguimento pós-operatório mínimo de 12 meses. A análise estatística não mostrou diferença significativa, ao nível de 5%, entre as avaliações objetiva e subjetiva. A ausência de lesão ligamentar periférica pode ter contribuído para que os resultados clínicos pós-operatórios tenham avaliação subjetiva satisfatória; entretanto, a presença de uma posteriorização tibial residual sugere que a fratura-avulsão do ligamento cruzado posterior deve ser abordada não como uma lesão óssea pura, mas sim, como uma lesão ósteo-ligamentar.

EXPRESSION OF C-ERB B-2 PROTEIN AND DNA-PLOIDY IN BREAST CARCINOGENESIS

Objective.-to examine the c-erb B-2 expression and nuclear DNA content in samples of breast lesions to ascertain any relationship between c-erb B-2 expression and aneuploidy in the different types of proliferative breast lesions and in intraductal and invasive carcinomas.Design and Setting.-lmmunohistochemical analysis of c-erb B-2 expression and cytometric nuclear DNA assessment were performed in a series of 39 cases of intraductal hyperplasia without atypia, 7 cases of intraductal hyperplasia with atypia, 64 cases of intraductal carcinoma, and 85 cases of invasive breast carcinoma (30 of which had extensive intraductal component).Results.-Overexpression of c-erb B-2 was seen only in cases of carcinoma: 28 (43.7%) intraductal carcinomas and 15 (17.6%) invasive carcinomas. Aneuploidy was demonstrated in 3 (43.0%) cases of intraductal hyperplasia with atypia, in 54 (84.4%) cases of intraductal carcinoma, and in 63 (74.2%) cases of invasive carcinoma. All cases of intraductal hyperplasia without atypia were euploid and none expressed c-erb B-2. Among the carcinomas (intraductal and invasive) there was a strong relationship between aneuploidy and c-erb B-2 expression. In most instances, the intraductal and invasive components of the 30 invasive carcinomas with extensive intraductal component displayed similar DNA content and c-erb B-2 immunoreactivity; whenever there was a difference, the intraductal component tended to be aneuploid (five out of six cases) and c-erb B-2 positive (one case), in contrast to the respective invasive component.Conclusions.-The higher frequency of aneuploidy and c-erb B-2 expression in intraductal carcinomas in comparison with invasive carcinomas suggests there is not a linear relationship between DNA content abnormalities and neoplastic progression and that some invasive breast carcinomas evolve without an identifiable intraductal phase or are unrelated to disturbances at the c-erb B-2 locus.

Protective Effect of HLA-DRB1*11 and Predisposition of HLA-C*04 in the Development of Severe Liver Damage in Brazilian Patients with Chronic Hepatitis C Virus Infection

The objective of this study was to investigate human leucocyte antigen (HLA) genes in patients chronically infected with hepatitis C virus (HCV) and to analyse the possible role of these genes in the progression of chronic hepatitis C. One hundred and forty-five (145) Brazilian patients infected only with HCV genotype 1 were evaluated. HLA class I (A*, B*, C*) and class II (DRB1*, DQA1*, DQB1*) typing were carried out by PCR-SSO, through Luminex technology. Associations were found with protection against development of liver damage by both DRB1*11 (5.0% versus 18.2%, P = 0.0016, OR = 0.23, CI 95% = 0.090.58; Pc=0.0208) and DRB1*11-DQA1*05-DQB1*03 haplotype (4.2% versus 15.3%, P = 0.0032; OR = 0.24, CI 95% = 0.08-0.64). Liver damage was associated with HLA-C*04 in patients with <20 years of infection (38.4% versus 9.1%, P = 0.002, OR = 6.25, CI 95% = 1.9719.7; Pc=0.0238). It is concluded that HLA alleles can influence the development of liver damage in HCV type-1 chronically infected Brazilian patients.

Influence of HLA alleles in response to treatment with pegylated interferon-alpha and ribavirin in patients with chronic hepatitis C

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

An objective reconstruction of the chain of contagion

North's clustering method, which is based on a much used ecological model, the nearest neighbor distance, was applied to the objective reconstruction of the chain of household-to-household transmission of variola minor (the mild form of smallpox). The discrete within-household outbreaks were considered as points which were ordered in a time sequence using a 10-40 day interval between introduction of the disease into a source household and a receptor household. The closer points in the plane were assumed to have a larger probability of being links of a chain of household-to-household spread of the disease. The five defining distances (Manhattan or city-block distance between presumptive source and receptor dwellings) were 100, 200, 300, 400 and 500 m. The subchain sets obtained with the five defining distances were compared with the subchains empirically reconstructed during the field study of the epidemic through direct investigation of personal contacts of the introductory cases with either introductory or subsequent cases from previously affected households. The criteria of fit of theoretical to empirical clusters were: (a) the number of clustered dwellings and subchains, (b) number of dwellings in a subchain and (c) position of dwellings in a subchain. The defining distance closet to the empirical findings was 200 m, which fully agrees with the travelling habits of the study population. Less close but acceptable approximations were obtained with 100, 300, 400 and 500 m. The latter two distances gave identical results, as if a clustering ceiling had been reached. It seems that North's clustering model may be used for an objective reconstruction of the chain of contagious whose links are discrete within-household outbreaks. © 1984.

Aspects of the sexual reproduction of the Brazilian arnica (Solidago chilensis Meyen var. megapotamica (D.C.) Cabrera - Asteraceae)

The species is a very popularly used plant as woundwort. Leaves, top flowers and rhizomes are used. The objective of this work is a contribution to the germination study, photoblastism and more adequate temperature for reproduction of the species. The best temperature for the germination was found to be 20°C and no seeds germinated under continuous darkness, within 14 days; therefore, the seeds are positive photoblastics. The seed germination percentage was low, in relation to the mass of the achene produced, varying from 8,2 to 20,0%. The alternated temperatures of 20° and 30°C did not influence the seed germination and the average of the weight of 100 seeds was 0,026 1 g.

Java applets for a WWW-HTML-based course in power electronics

This paper introduces Java applet programs for a WWW (world wide web)-HTML (hypertext markup language)-based multimedia course in Power Electronics. The applet programs were developed with the purpose of providing an interactive visual simulation and analysis of idealized uncontrolled single-phase, and three-phase rectifiers. In addition, this paper discusses the development and utilization of JAVA applet programs to solve some design-oriented equations for rectifier applications. The major goal of these proposed JAVA applets was to provide more facilities for the students increase their pace in Power Electronics course, emphasizing waveforms analysis, and providing conditions for an on-line comparative analysis among different hands-on laboratory experiences, via a normal Internet TCP/IP connection. Therefore, using the proposed JAVA applets, which were embedded in a WWW-HTML-based course in Power Electronics, was observed an important improvement of the apprenticeship for the content of this course. Therefore, the course structure becomes fluid, allowing a true on-line course over the WWW, motivating students to learn its content, and apply it in some applications-oriented projects, and their home-works.

Educational Java applets get in power electronics labs

This paper presents Java applet programs for a WWW (world wide web)-HTML (hypertext markup language)-based multimedia course in basic power electronics circuits. These tools make use of the benefits of Java language to provide a dynamic and interactive approach to simulate steady-state idealized rectifiers (uncontrolled and controlled; single-phase and three-phase). In addition, this paper discusses the development and the use of the Java applet programs to assist the teaching of basics rectifier power electronics circuits, and to serve as a first design tool for basics power electronics circuits in the experiments of the laboratories. In order to validate the developed simulation applets, the results were confronted with results obtained from a well-know simulator package PSPICE. © 2005 IEEE.

Influence of resin composite insertion technique in preparations with a high C-factor

Objective: To evaluate the marginal microleakage in enamel and dentin/cementum walls in preparations with a high C-factor, using 3 resin composite insertion techniques. The null hypothesis was that there is no difference among the 3 resin composite insertion techniques. Method and Materials: Standardized Class 5 cavities were prepared in the lingual and buccal aspects of 30 caries-free, extracted third molars. The prepared teeth were randomly assigned to 3 groups: (1) oblique incremental placement technique, (2) horizontal incremental placement technique, and (3) bulk insertion (single increment). The preparations were restored with a 1-bottle adhesive (Single Bond, 3M ESPE) and microhybrid resin composite (Z100, 3M ESPE). Specimens were isolated with nail varnish except for a 2-mm-wide rim around the restoration and thermocycled (1,000 thermal cycles, 5°C/55°C; 30-second dwell time). The specimens were immersed in an aqueous solution of 50 wt% silver nitrate for 24 hours, followed by 8 hours in a photo-developing solution and evaluated for microleakage using an ordinal scale of 0 to 4. The microleakage scores obtained from occlusal and gingival walls were analyzed with Wilcoxon and Kruskal-Wallis nonparametric tests. Results: The null hypothesis was accepted. The horizontal incremental placement technique, the oblique incremental technique, and bulk insertion resulted in statistically similar enamel and dentin microleakage scores. Conclusion: Neither the incremental techniques nor the bulk placement technique were capable of eliminating the marginal microleakage in preparations with a high C-factor.

Razão triglicérides/HDL-C e proteína C reativa de alta sensibilidade na avaliação do risco cardiovascular

Introduction: Calculated indexes from laboratory measurements and the determination of plasma markers are commonly used in cardiovascular risk assessment. Objective: To use triglycerides/high-density lipoprotein cholesterol (HDL-C) ratio, estimate of low-density lipoprotein (LDL) particle size and high sensitive C-reactive protein (hs-CRP) levels to the clinical and laboratorial assessment of coronary risk among patients with coronary disease. Material and methods: Sixty patients were chosen accordingly, 36 female (F) (65 ± 9 years of age) and 24 male (M) (55 ± 10 years of age) diagnosed with stable ischemic cardiopathy at Ana Neri Hospital, Salvador, Bahia, Brazil. The investigation was carried out at the Clinical Biochemistry Laboratory of the College of Pharmacy at Federal University of Bahia (UFBA). Blood samples were collected after a 12-hour fast to determine hs-CRP, lipid profile and risk indicators. All data were assessed through Syncron LX®20 Beckman Coulter. The inferential analysis results were considered significant when p ≤ 5%. Data analysis was carried out with GraphPad Prism® (4.03 version) software. Results: Data analysis showed a positive correlation between hs-CRP and triglycerides/HDL-C ratio only among women (r = 0.4; p = 0.0442), n = 36. The analysis of other parameters did not show any significance. Conclusion: The triglycerides/HDL-C ratio and hs-CRP may be used as indicators of increase in cardiovascular risk among women with coronary artery disease (CAD).

A multi-objective programming approach for the optimal operation of distributed generation considering uncertainty

Due to the renewed interest in distributed generation (DG), the number of DG units incorporated in distribution systems has been rapidly increasing in the past few years. This situation requires new analysis tools for understanding system performance, and taking advantage of the potential benefits of DG. This paper presents an evolutionary multi-objective programming approach to determine the optimal operation of DG in distribution systems. The objectives are the minimization of the system power losses and operation cost of the DG units. The proposed approach also considers the inherent stochasticity of DG technologies powered by renewable resources. Some tests were carried out on the IEEE 34 bus distribution test system showing the robustness and applicability of the proposed methodology. © 2011 IEEE.

Antimicrobial effects of ozonated water on the sanitization of dental instruments contaminated with E. coli, S. aureus, C. albicans, or the spores of B. atrophaeus

Objectives: Ozone has been used as an alternative method for the decontamination of water, food, equipment and instruments. The objective of this study was to evaluate the antimicrobial effects of ozonated water on the sanitization of dental instruments that were contaminated by Escherichia coli, Staphylococcus aureus, Candida albicans and the spores of Bacillus atrophaeus. Methods: A total of one hundred and twenty standardized samples of diamond dental burs were experimentally contaminated with E. coli (ATCC 25922), S. aureus (ATCC 6538) and C. albicans (ATCC 18804) and the spores of B. atrophaeus (ATCC 6633) for 30min. After the contamination, the samples were exposed to ozonated water (10mg/L O3) for 10 or 30min. The control group was composed of samples that were exposed to distilled water for 30min. After the exposure to the ozonated water, 0.1mL aliquots were seeded onto BHI agar to count the colony-forming units per milliliter (CFU/mL) of E. coli, S. aureus, and B. atrophaeus. Sabouraud dextrose agar was used to count the CFU/mL of C. albicans. The results were subjected to an analysis of variance and the Tukey test. Results: For all of the microorganisms studied, the ozonated water reduced the number of CFU/mL after 10 and 30. min of sanitization, and this microbial reduction was dependent on the duration of the exposure to the ozonated water. E. coli exhibited the greatest reduction in CFU/mL (2.72-3.78. log) followed by S. aureus (2.14-3.19. log), C. albicans (1.44-2.14. log) and the spores of B. atrophaeus (1.01-1.98. log). Conclusion: The ozonated water was effective in reducing the CFU of E. coli, S. aureus, C. albicans and B. atrophaeus spores, suggesting that ozonated water can be used for the sanitization of dental instruments. © 2012 King Saud Bin Abdulaziz University for Health Sciences.

Desenvolvimento de interface amigável de rotina em linguagem c++ para o processamento aritmético e estatístico de dados censitários

A routine was developed in C++ for the processing of social and environmental census data acquired by the Brazilian Institute of Geography and Statistics (IBGE). The routine employs a simple graphical environment. The data generated are presented in a tabular format, which facilitates a broad and objective view of the values, and provides a convenient means of querying the database. The source code used to develop the routine permits updates and changes, as required by the user. Statistical and mathematical analysis enables the generation of social and environmental indicators, together with quantitative and qualitative classification of the socio-environmental quality of the region analyzed. As an example, the routine was applied using census data for the city of Sorocaba (São Paulo State, Brazil), including conditions of household occupation, water supply, sanitation, level of education, income, and other factors. It is envisaged that the proposed analytical model will assist professionals from different fields of research and teaching to develop urban planning and management strategies.