Novo formato de pilar protético em zircônia estabilizada por Itría (Y-Tzp) para implantodontia desenvolvido pela técnica de slip casting

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência da angulação do preparo coronário na resistência à fratura de restaurações cerâmicas à base de Y-TZP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Etnoecologia da pesca na Reserva Extrativista Riozinho do Anfrísio - Terra do Meio, Amazônia, Brasil

Este artigo apresenta alguns aspectos etnoecológicos da atividade pesqueira na Reserva Extrativista Riozinho do Anfrísio, área protegida (AP) localizada no município de Altamira, Pará. Esta AP foi criada em 2004 através de uma iniciativa conjunta dos ribeirinhos e movimentos sociais da região da Transamazônica e Xingu. Dentre as diversas atividades produtivas desenvolvidas pelos ribeirinhos, a pesca é uma das mais importantes. Através de métodos atinentes ao campo da etnoecologia, foram estudadas as cosmologias e os saberes locais acerca da ictiofauna de importância alimentar e comercial. O estudo apontou que os ribeirinhos demonstram grande conhecimento sobre os ecossistemas e a biodiversidade de peixes, o qual deve ser reconhecido como parte do patrimônio biocultural local. Em termos de estratégias para a conservação dos recursos naturais estes saberes devem ser igualmente valorizados.

Modelo teórico de sensores ópticos baseados em fibras com grade de Bragg

Ao se aplicar uma tração exterior a uma fibra óptica, seu índice de refração pode modificar devido ao efeito foto-elástico. Quando a fibra contém uma grade de Bragg inscrita em seu núcleo, além do índice de refração seu período espacial também modifica, permitindo sua aplicação como sensores ópticos de temperatura e/ou deformação de alta sensitvidade. Do ponto de vista teórico, até o presente a operação de sensores baseados em fibras ópticas com grade de Brag (FGB) é explicada pelo efeito foto-elástico, através de componentes adequadas do tensor foto-elástico de fibras de sílica dopadas com germânio (germano-silicatadas). Em praticamente toda a literatura previamente estudada, apenas este tipo de fibra óptica tem suas propriedades optomecânicas bem definidas, o que pode representar uma restrição. Nesta dissertação apresentamos uma formulação teórica alternativa para o estudo das propriedades de um sensor de deformação longitudinal baseado em fibra óptica com grade de Bragg (FGB) que não depende do conhecimento prévio das componentes do tensor foto-elástico, e que leva a resultados que dependem apenas da razão de Poisson da fibra, uma característica mecânica facilmente mensurável, e de seu índice de refração efetivo. Os resultados obtidos com este modelo apresentam ótima concordância com aqueles obtidos pelo modelo conhecido da literatura, além de permitir estimar o comportamento de outros parâmetros relacionados ao espectro de refletividade da FGB.

Safety factors in sheet pile wall design: considerations by using traditional methods and FEM analysis

The purpose of the work is: define and calculate a factor of collapse related to traditional method to design sheet pile walls. Furthermore, we tried to find the parameters that most influence a finite element model representative of this problem. The text is structured in this way: from chapter 1 to 5, we analyzed a series of arguments which are usefull to understanding the problem, while the considerations mainly related to the purpose of the text are reported in the chapters from 6 to 10. In the first part of the document the following arguments are shown: what is a sheet pile wall, what are the codes to be followed for the design of these structures and what they say, how can be formulated a mathematical model of the soil, some fundamentals of finite element analysis, and finally, what are the traditional methods that support the design of sheet pile walls. In the chapter 6 we performed a parametric analysis, giving an answer to the second part of the purpose of the work. Comparing the results from a laboratory test for a cantilever sheet pile wall in a sandy soil, with those provided by a finite element model of the same problem, we concluded that:in modelling a sandy soil we should pay attention to the value of cohesion that we insert in the model (some programs, like Abaqus, don’t accept a null value for this parameter), friction angle and elastic modulus of the soil, they influence significantly the behavior of the system (structure-soil), others parameters, like the dilatancy angle or the Poisson’s ratio, they don’t seem influence it. The logical path that we followed in the second part of the text is reported here. We analyzed two different structures, the first is able to support an excavation of 4 m, while the second an excavation of 7 m. Both structures are first designed by using the traditional method, then these structures are implemented in a finite element program (Abaqus), and they are pushed to collapse by decreasing the friction angle of the soil. The factor of collapse is the ratio between tangents of the initial friction angle and of the friction angle at collapse. At the end, we performed a more detailed analysis of the first structure, observing that, the value of the factor of collapse is influenced by a wide range of parameters including: the value of the coefficients assumed in the traditional method and by the relative stiffness of the structure-soil system. In the majority of cases, we found that the value of the factor of collapse is between and 1.25 and 2. With some considerations, reported in the text, we can compare the values so far found, with the value of the safety factor proposed by the code (linked to the friction angle of the soil).

Study of the Compressive Strength of Aluminum Curved Elements

Currently, the Specification for Aluminum Structures (Aluminum Association, 2010) shows thin-walled aluminum plate sections with radii greater than eight inches have a lower compressive strength capacity than a flat plate with the same width and thickness. This inconsistency with intuition, which suggests any degree of folding a plate should increase its elastic buckling strength, inspired this study. A wide range of curvatures are studied—from a nearly flat plate to semi-circular. To quantify the curvature, a single non-dimensional parameter is used to represent all combinations of width, thickness and radius. Using the finite strip method (CU-FSM), elastic local buckling stresses are investigated. Using the ratio of stress values of curved plates compared to flat plates of the same size, equivalent plate-buckling coefficients are calculated. Using this data, nonlinear regression analyses are performed to develop closed form equations for five different edge support conditions. These equations can be used to calculate the elastic critical buckling stress for any curved aluminum section when the geometric properties (width, thickness, and radius) and the material properties (elastic modulus and Poisson’s ratio) are known. This procedure is illustrated in examples, each showing the applicability of the derived equations to geometries other than those investigated in this study and also providing comparisons with theoretically exact numerical analysis results.

A systematic review of the survival and complication rates of resin-bonded bridges after an observation period of at least 5 years

OBJECTIVES: The objectives of this systematic review were to assess the 5-year survival of resin-bonded bridges (RBBs) and to describe the incidence of technical and biological complications. METHODS: An electronic Medline search complemented by manual searching was conducted to identify prospective and retrospective cohort studies on RBBs with a mean follow-up time of at least 5 years. Patients had to have been examined clinically at the follow-up visit. Assessment of the identified studies and data extraction were performed independently by two reviewers. Failure and complication rates were analyzed using random-effects Poissons regression models to obtain summary estimates of 5-year proportions. RESULTS: The search provided 6110 titles and 214 abstracts. Full-text analysis was performed for 93 articles, resulting in 17 studies that met the inclusion criteria. Meta-analysis of these studies indicated an estimated survival of RBBs of 87.7% (95% confidence interval (CI): 81.6-91.9%) after 5 years. The most frequent complication was debonding (loss of retention), which occurred in 19.2% (95% CI: 13.8-26.3%) of RBBs over an observation period of 5 years. The annual debonding rate for RBBs placed on posterior teeth (5.03%) tended to be higher than that for anterior-placed RBBs (3.05%). This difference, however, did not reach statistical significance (P=0.157). Biological complications, like caries on abutments and RBBs lost due to periodontitis, occurred in 1.5% of abutments and 2.1% of RBBs, respectively. CONCLUSION: Despite the high survival rate of RBBs, technical complications like debonding are frequent. This in turn means that a substantial amount of extra chair time may be needed following the incorporation of RBBs. There is thus an urgent need for studies with a follow-up time of 10 years or more, to evaluate the long-term outcomes.

Velocities and elastic moduli of basalts from Pacific DSDP sites

Compressional (Vp) and shear (Vs) wave velocities have been measured to 10 kb in 32 cores of basalt from 14 Pacific sites of the Deep Sea Drilling Project. Both Vp and V s show wide ranges (3.70 to 6.38 km/sec for Vp and 1.77 to 3.40 km/sec for V s at 0.5 kb) which are linearly related to density and sea floor age, confirming earlier findings by Christensen and Salisbury of decreasing velocity with progressive submarine weathering based on studies of basalts from five sites in the Atlantic. Combined Pacific and Atlantic data give rates of decreasing velocity of -1.89 and -1.35 km/sec per 100 my for Vp and Vs respectively. New analyses of oceanic seismic refraction data indicate a decrease in layer 2 velocities with age similar to that observed in the laboratory, suggesting that weathering penetrates to several hundred meters in many regions and is largely responsible for the extreme range and variability of layer 2 refraction velocities.

Comparison of vibration and rolling noise emission of resilient and solid monobloc railway wheels in underground lines

Flat or worn wheels rolling on rough or corrugated tracks can provoke airborne noise and ground-borne vibration, which can be a serious concern for nearby neighbours of urban rail transit lines. Among the various treatments used to reduce vibration and noise, resilient wheels play an important role. In conventional resilient wheels, a slightly prestressed V­shaped rubber ring is mounted between the steel wheel centre and tyre. The elastic layer enhances rolling noise and vibration suppression, as well as impact reduction on the track. In this paper the effectiveness of resilient wheels in underground lines, in comparison to monobloc ones, is assessed. The analysed resilient wheel is able to carry greater loads than standard resilient wheels used for light vehicles. It also presents a greater radial resiliency and a higher axial stiffness than conventional V­wheels. The finite element method was used in this study. A quarter car model was defined, in which the wheelset was modelled as an elastic body. Several simulations were performed in order to assess the vibrational behaviour of elastic wheels, including modal, harmonic and random vibration analysis, the latter allowing the introduction of realistic vertical track irregularities, as well as the influence of the running speed. Due to numerical problems some simplifications were needed. Parametric variations were also performed, in which the sensitivity of the whole system to variations of rubber prestress and Poisson’s ratio of the elastic material was assessed.Results are presented in the frequency domain, showing a better performance of the resilient wheels for frequencies over 200 Hz. This result reveals the ability of the analyzed design to mitigate rolling noise, but not structural vibrations, which are primarily found in the lower frequency range.

Cohesive-frictional modelling of bond and splitting action of prestressing wire

This work shows a numerical procedure for bond between indented wires and concrete, and the coupled splitting of the concrete. The bond model is an interface, non-associative, plasticity model. It is coupled with a cohesive fracture model for concrete to take into account the splitting of such concrete. The radial component of the prestressing force, increased by Poisson’s effect, may split the surrounding concrete, decreasing the wire confinement and diminishing the bonding. The combined action of the bond and the splitting is studied with the proposed model. The results of the numerical model are compared with the results of a series of tests, such as those which showed splitting induced by the bond between wire and concrete. Tests with different steel indentation depths were performed. The numerical procedure accurately reproduces the experimental records and improves knowledge of this complex process.

Estudio de hormigón autocompactante con árido reciclado

La tesis doctoral “Estudio de hormigón autocompactante con árido reciclado” realizada dentro del programa de doctorado de la Universidad Politécnica de Madrid “Máster en técnicas experimentales avanzadas en la ingeniería civil”, investiga la sustitución de áridos gruesos naturales por reciclados en hormigones autocompactantes, para demostrar la posibilidad de utilización de este tipo de árido en la fabricación de hormigones autocompactantes. En cuanto a la línea experimental adoptada, la primera fase corresponde a la caracterización de los cementos y de los áridos naturales y reciclados. En ella se han obtenido las principales características físicas y mecánicas. Una vez validadas las características de todos los materiales y adoptada una dosificación de hormigón autocompactante, se han elaborado cuatro dosificaciones con cuatro grados de incorporación de árido reciclado cada una, y una dosificación con seis grados de incorporación de árido reciclado. Fabricándose un total de 22 tipos de hormigón diferentes, sin contar todas las amasadas iniciales hasta la consecución de un hormigón autocompactante. Las cinco dosificaciones se han dividido en dos grupos para poder analizar con mayor grado de definición las características de cada uno. El primer grupo es aquel que contienen los hormigones con diferentes relaciones a/c, que incluye a la muestra A (a/c=0.55), muestra D (a/c=0.50) y muestra E (a/c=0.45). Por el contrario, el segundo grupo dispone de una relación fija de a/c=0.45 pero diferentes relaciones a/c efectivas, ya que algunas de las muestras disponen de un contenido de agua que permite contrarrestar la mayor absorción del árido reciclado. Estando en este grupo la muestra E (sin agua adicional), la muestra H (con presaturación de los áridos) y la muestra I (con un aporte de agua junto con el agua de amasado. Una vez fabricados los hormigones, se pasa a la segunda fase del estudio correspondiente a la caracterización del hormigón en estado fresco. En esta fase se han llevado a cabo los ensayos de escurrimiento, escurrimiento con anillo japonés, ensayo embudo en V y embudo V a los 5 minutos. Todos estos ensayos permiten evaluar la autocompactabilidad del hormigón según el anejo 17 de la EHE-08. La tercera fase del estudio se centra en la caracterización de los hormigones en estado endurecido, evaluando las características resistentes del hormigón. Para ello, se han realizado los ensayos de resistencia a compresión, a tracción, módulo de elasticidad y coeficiente de Poisson. En la cuarta y última fase, se han analizado la durabilidad de los hormigones, debido que a pesar de ofrecer una adecuada autocompactabilidad y resistencia mecánica, se debe de obtener un hormigón con una correcta durabilidad. Para tal fin, se ha determinado la resistencia a la penetración de agua bajo presión y carbonatación de las probetas. Este último ensayo se ha realizado teniendo en cuenta las condiciones del denominado método natural, con una exposición al ambiente de 90 días y 365 días. Con todos estos resultados se elaboraron las conclusiones derivadas de la investigación, demostrándose la posibilidad de fabricación de hormigones autocompactantes con árido reciclado (HACR) con sustituciones de hasta un 40%, e incluso dependiendo de la relación a/c con sustituciones del 60% y el 80%. ABSTRACT The doctoral thesis titled Analysis of self-compacting concrete with recycled aggregates, has been developed in accordance with the doctoral program: Master degree in advanced experimental techniques in civil engineering, at UPM. It investigates the possibility of replacing natural coarse aggregates with recycled coarse aggregates, in the field of self-compacting concrete. The aim of this dissertation is to analyze the possibility of using recycled coarse aggregates in the manufacture process of self-compacting concretes. Regarding the experimental part, the first phase refers to mechanical and physical characterization of some materials such as cement, natural aggregates and recycled aggregates. Once the characteristics of all materials have been validated and the mixing proportions have been adopted, four different mixes are elaborated by using four dosage rates of recycled aggregates in each one of the samples. Moreover, an additional sample consisting of six different dosages of recycled aggregates is considered. A total number of 22 concrete specimens have been manufactured, without including all the initial kneading samples used to obtain this type of self-compacting concrete. The aforementioned mixes have been divided in two different groups to be able to analyze with more definition. The first group is the one in which the concrete contains different values of the water - cement ratio. It includes the next samples: A (w/c=0.55), D (w/c=0.50) and E (w/c=0.45). The second group has a fixed water -cement ratio, w/c=0.45, but a different effective water - cement ratio, since some of the samples have a water content that enables to offset the major absorption of the recycled aggregates, being in this group the mixing E (without additional water), the mixing H (with saturated recycled aggregate) and the mixing I (with an additional water content to the existing kneading water). Once the concrete samples have been manufactured, the following section deals with the characterization of the concrete in fresh conditions. To accomplish this, several characterization tests are carried out such as the slump-flow test, test slump flow with Japanese ring, test V-funnel and V-funnel to 5 minutes. These tests are used to assess the self-compacting conditions according to the annex 17 of the EHE-08 The third phase of the study focuses on the mechanical characterization, the assessment of the strength properties of the concrete such as compressive strength, tensile strength, modulus of elasticity and Poisson´s ratio. Within the fourth and last phase, durability of the concrete is evaluated. This fact is motivated by the need to obtain not only good self-compacting and mechanical strength properties, but also adequate durability conditions. To accomplish the aforementioned durability, resistance of the samples under certain conditions such as water penetration pressure and carbonation, has been obtained. The latter test has been carried out taking into account the natural method, with an exhibition period to the environment of 90 days and 365 days. Through the results coming from this research work, it has been possible to obtain the main conclusions. It has been demonstrated the possibility to manufacture self-compacting concrete by using recycled aggregates with replacement rates up to 40% or, depending on the w/c ratio, rates of 60% and 80% might be reached.

Restauración del medio marino en la reserva marina de Tabarca (Alicante, España): estructura y variaciones temporales de la ictiofauna asociada al arrecife artificial

El arrecife artificial de Tabarca se diseñó e instaló principalmente con el objetivo de impedir la pesca de arrastre ilegal sobre las praderas de Posidonia oceanica. Además se diseñó un arrecife alveolar experimental para estudiar sus efectos sobre la ictiofauna litoral y sus posibilidades como lugar de pesca alternativo a la flota artesanal de Tabarca. La ictiofauna asociada al arrecife artificial de Tabarca se estudió mediante censos visuales durante tres años consecutivos entre 1990 y 1992, con una frecuencia estacional. Los resultados muestran una estructura de la comunidad condicionada por el diseño y emplazamiento de los módulos. La dinámica temporal manifiesta una clara diferencia según consideremos el poblamiento total o sólo el residente: el primero refleja una pauta muy fluctuante, poco predecible; el poblamiento residente muestra una tendencia hacia la estructuración, con un aumento progresivo de especies sedentarias predadoras, y un incremento significativo de la biomasa. Estos resultados refuerzan las interpretaciones que dan un papel condicionante al tamaño del arrecife artificial y a su localización.

Composición de la dieta y estrategia alimentaria de cinco especies de peces bentónicos de la costa de Cullera (España)

This paper provides data on diet and feeding habits of five benthic fish species (Torpedo torpedo (Linnaeus,1758), Mullus surmuletus (Linnaeus, 1758), Uranoscopus scaber (Linnaeus,1758), Scorpaena scrofa (Linnaeus,1758) and Synaptura lusitanica (Capello,1868)) common in the artisanal fisheries in the Cullera coast (Mediterranean sea – Spain) and T.torpedo, U.scaber y S. lusitánica feeding habits are almost unknown. T. torpedo preferred small preys like fishes, polychaetes and molluscs, these preys were feed in small portions. M. surmuletus showed the highest feeding dynamic, consuming small prey in large numbers like crustaceans (brachyura and amphypoda). U. scaber had similar feeding habits, but the numbers of preys in the stomach were lower. The principal preys were fishes, crustaceans, molluscs and polychaetes. S.scrofa ate larger prey items such as fish, followed by crustaceans and molluscs. Finally S. lusitánica had a high vacuity index, feeding polychaetes as the most important prey in their diet. Feeding strategy indicates a specialization of T.torpedo, S.scrofa and S. lusitanica; conversely M. surmuletus and U. scaber were generalized species.

Preliminary data on horse mackerel (Trachurus spp) landings from Mauritanian waters

European fishery off Mauritania (one of the most productive and most intensively exploited regions in the world) targeted to small pelagic fish accounts for 30% of the total catches in the area. The Instituto Español de Oceanografía (IEO), through its Centro Oceanográfico de Canarias, follows up the activity of these vessels that land at Spanish port (Las Palmas de Gran Canaria, Spain), under the European Project Data Collection (Regulation (EC) 1543/2000). One of the target groups in this fishery is Trachurus spp, commercially named “JAX”. During 2008 and 2009, several samples of this group from these landings were analysed, and Caranx rhonchus was the second species of importance. The mixture of these species in the landings of this UE fleet should be determined to improve the data provided to the international Working Groups responsible for assessment of those resources.

Trends in socioeconomic inequalities in amenable mortality in urban areas of Spanish cities, 1996-2007

Background: While research continues into indicators such as preventable and amenable mortality in order to evaluate quality, access, and equity in the healthcare, it is also necessary to continue identifying the areas of greatest risk owing to these causes of death in urban areas of large cities, where a large part of the population is concentrated, in order to carry out specific actions and reduce inequalities in mortality. This study describes inequalities in amenable mortality in relation to socioeconomic status in small urban areas, and analyses their evolution over the course of the periods 1996–99, 2000–2003 and 2004–2007 in three major cities in the Spanish Mediterranean coast (Alicante, Castellón, and Valencia). Methods: All deaths attributed to amenable causes were analysed among non-institutionalised residents in the three cities studied over the course of the study periods. Census tracts for the cities were grouped into 3 socioeconomic status levels, from higher to lower levels of deprivation, using 5 indicators obtained from the 2001 Spanish Population Census. For each city, the relative risks of death were estimated between socioeconomic status levels using Poisson’s Regression models, adjusted for age and study period, and distinguishing between genders. Results: Amenable mortality contributes significantly to general mortality (around 10%, higher among men), having decreased over time in the three cities studied for men and women. In the three cities studied, with a high degree of consistency, it has been seen that the risks of mortality are greater in areas of higher deprivation, and that these excesses have not significantly modified over time. Conclusions: Although amenable mortality decreases over the time period studied, the socioeconomic inequalities observed are maintained in the three cities. Areas have been identified that display excesses in amenable mortality, potentially attributable to differences in the healthcare system, associated with areas of greater deprivation. Action must be taken in these areas of greater inequality in order to reduce the health inequalities detected. The causes behind socioeconomic inequalities in amenable mortality must be studied in depth.