Vegetación bioindicadora de metales pesados en un sistema semiárido

Evaluar la contaminación por metales pesados en los ecosistemas permite conocer la capacidad bioindicativa de especies vegetativas. El objetivo fue determinar la concentración de metales pesados en Prosopis laevigata, Acacia spp. y Schinus molle bajo el efecto de usos suelo y temporalidad. El área se sitúa en la colindancia de los Municipios de Soledad de Graciano Sánchez y San Luis Potosí fragmentada por usos de suelo: agropecuario, comercio y servicios, residencial urbano y minero. Fueron tomadas muestras de hojas de las tres especies en las estaciones de verano, otoño, invierno y primavera y se evaluó la concentración de metales pesados a través de la técnica de ICP-MS. Los análisis estadísticos indicaron niveles de Aluminio (Al) > Cinc (Zn) > Plomo (Pb) > Cobre (Cu) > Titanio (Ti) > Vanadio (V) > Arsénico (As) > Cromo (Cr) > Cadmio (Cd) > Cobalto (Co). Los elementos Al, As, Cd, Cr, Pb y Ti presentaron niveles por encima del umbral normal en vegetación. El uso de suelo tuvo efecto significativo con Al, Ti, Cd, As y Pb; los árboles ubicados en los usos de suelo minero, comercio y servicios tuvieron la mayor concentración. La especie tuvo efecto significativo con Al y Pb siendo Acacia spp. el que presentó la mayor capacidad de acumulación. La temporada del año impactó significativamente en la acumulación de As, Cd, Co, Cu, Cr y Ti en las tres especies. La dinámica antropogénica de los diferentes usos de suelo genera partículas y residuos con metales pesados impactando en la disponibilidad y acumulación en las especies evaluadas. Se contribuye a evaluar el impacto ambiental en el sistema fragmentado recomendando dar continuidad a este tipo de estudios.

Optimización de las condiciones de electrodeposición para la obtención de núcleos sensores

Mostraremos los resultados obtenidos en la búsqueda de las condiciones de crecimiento óptimas para que las propiedades magnéticas de aleaciones de CoP sean las adecuadas para utilizarlas como núcleos de sensores. Demostraremos que utilizando una densidad de corriente adecuada en el proceso de electrodeposición, es posible obtener aleaciones formadas por capas ferromagnéticas de distinta composición que presentan anisotropía en el plano y un campo coercitivo comparable al de las aleaciones producidas por enfriamiento ultrarrápido. Como ánodos empleamos láminas de cobalto de 1 mm de espesor y una pureza del 99.95%. Como sustratos utilizamos tanto láminas de Cu como sustratos fabricados por sputtering. Durante la electrodeposición se ha utilizado la agitación del electrolito y la vibración del cátodo para facilitar el desprendimiento de las burbujas de H2 que se generan durante el proceso. De esta forma se han obtenido las monocapas controlando los dos parámetros siguientes: la densidad de corriente y el tiempo de aplicación de la misma. Por otro lado, para las multicapas se han aplicado pulsos de corriente donde se han tenido que controlar la duración de los pulsos y la intensidad de los mismos.

Aporte martensíticos en la soldadura de aceros 9%Cr

Los aceros 9% en cromo son utilizados en plantas de producción de energía eléctrica debido a su elevada resistencia a la corrosión, buenas propiedades mecánicas y resistencia a la termofluencia. Estos aceros presentan una estructura completamente martensítica. Sin embargo, la realización de uniones soldadas los hace susceptibles a la aparición en la zona fundida de ferrita delta, que reduce sus propiedades de termofluencia y tenacidad. Este trabajo analiza la microestructura del metal de aporte producido durante la soldadura manual con electrodo consumible (SMAW) utilizando aportes con diferentes composiciones en cromo y otros elementos de aleación como molibdeno, wolframio, cobre y cobalto. El objetivo ha sido el análisis de consumibles con diferente composición química con los cuales se obtengan zonas fundidas con estructuras martensíticas libres de ferrita delta en la soldadura de aceros 9%Cr.

Análisis molecular de sistemas génicos implicados en la homeostasis de níquel y eficiencia simbiótica en Rhizobium leguminosarum

Los suelos ultramáficos, que poseen elevadas concentraciones de níquel, cobalto y cromo de manera natural, son fuente de bacterias resistentes a altas concentraciones de metales. Se realizó la caracterización físico-química de seis suelos ultramáficos del suroeste europeo, seleccionándose un suelo de la región de Gorro, Italia, como el más adecuado para aislar bacterias endosimbióticas resistentes a metales. A partir de plantas-trampa de guisante y lenteja inoculados con suspensiones de ese suelo, se obtuvieron 58 aislados de Rhizobium leguminosarum bv. viciae (Rlv) que fueron clasificados en 13 grupos según análisis de PCR-RAPDs. Se determinó la resistencia a cationes metálicos [Ni(II), Co(II), Cu(II), Zn(II)] de una cepa representante de cada grupo, así como la secuencia de los genomas de las cepas que mostraron altos niveles (UPM1137 y UPM1280) y bajos niveles (UPM1131 y UPM1136) de tolerancia a metales. Para identificar mecanismos de resistencia a metales se realizó una mutagénesis al azar en dicha cepa mediante la inserción de un minitransposón. El análisis de 4313 transconjugantes permitió identificar 14 mutantes que mostraron una mayor sensibilidad a Ni(II) que la cepa silvestre. Se determinó el punto de inserción del minitransposón en todos ellos y se analizaron en más detalle dos de los mutantes (D2250 y D4239). En uno de los mutantes (D2250), el gen afectado codifica para una proteína que presenta un 44% de identidad con dmeF (divalent efflux protein) de Cupriavidus metallidurans. Cadena arriba de dmeF se identificó un gen que codifica una proteína con un 39% de identidad con el regulador RcnR de Escherichia coli. Se decidió nombrar a este sistema dmeRF, y se generó un mutante en ambos genes en la cepa Rlv SPF25 (Rlv D15). A partir de experimentos de análisis fenotípico y de regulación se pudo demostrar que el sistema dmeRF tiene un papel relevante en la resistencia a Ni(II) y sobre todo a Co(II) en células en vida libre y en simbiosis con plantas de guisante. Ambos genes forman un operón cuya expresión se induce en respuesta a la presencia de Ni(II) y Co(II). Este sistema se encuentra conservado en distintas especies del género Rhizobium como un mecanismo general de resistencia a níquel y cobalto. Otro de los mutantes identificados (D4239), tiene interrumpido un gen que codifica para un regulador transcripcional de la familia AraC. Aunque inicialmente fue identificado por su sensibilidad a níquel, experimentos posteriores demostraron que su elevada sensibilidad a metales era debida a su sensibilidad al medio TY, y más concretamente a la triptona presente en el medio. En otros medios de cultivo el mutante no está afectado específicamente en su tolerancia a metales. Este mutante presenta un fenotipo simbiótico inusual, siendo inefectivo en guisantes y efectivo en lentejas. Análisis de complementación y de mutagénesis dirigida sugieren que el fenotipo de la mutación podría depender de otros factores distintos del gen portador de la inserción del minitransposón. ABSTRACT Ultramafic soils, having naturally high concentrations of nickel, cobalt and chrome, are potential sources of highly metal-resistant bacteria. A physico-chemical characterization of six ultramafic soils from the European southwest was made. A soil from Gorro, Italy, was chosen as the most appropriated for the isolation of heavy-metal-resistant endosymbiotic bacteria. From pea and lentil trap plants inoculated with soil suspensions, 58 isolates of Rhizobium leguminosarum bv. viciae (Rlv) were obtained and classified into 13 groups based on PCR-RAPDs analysis. The resistance to metallic cations [Ni(II), Co(II), Cu(II), Zn(II)] was analyzed in a representative strain of each group. From the results obtained in the resistance assays, the Rlv UPM1137 strain was selected to identify metal resistance mechanism. A random mutagenesis was made in UPM1137 by using minitransposon insertion. Analysis of 4313 transconjugants allowed to identify 14 mutants with higher sensitivity to Ni(II) than the wild type strain. The insertion point of the minitransposon was determined in all of them, and two mutants (D2250 and D4239) were studied in more detail. In one of the mutants (D2250), the affected gene encodes a protein with 44% identity in compared with DmeF (divalent efflux protein) from Cupriavidus metallidurans. Upstream R. leguminosarum dmeF, a gene encoding a protein with 39% identity with RcnR regulator from E. coli was identified. This protein was named DmeR. A mutant with both genes in the dmeRF deleted was generated and characterized in Rlv SPF25 (Rlv D15). From phenotypic and regulation analysis it was concluded that the dmeRF system is relevant for Ni(II) and specially Co(II) tolerance in both free living and symbiotic forms of the bacteria. This system is conserved in different Rhizobium species like a general mechanism for nickel and cobalt resistance. Other of the identified mutants (D4239) contains the transposon insert on a gene that encodes for an AraC-like transcriptional regulator. Although initially this mutant was identified for its nickel sensitivity, futher experiments demonstrated that its high metal sensitivity is due to its sensitivity to the TY medium, specifically for the tryptone. In other media the mutant is not affected specifically in their tolerance to metals. This mutant showed an unusual symbiotic phenotype, being ineffective in pea and effective in lentil. Complementation analysis and directed mutagenesis suggest that the mutation phenotype could depend of other factors different from the insertion minitransposon gene.

Identificación y análisis funcional de genes implicados en la homeostasis de níquel en la bacteria endosimbiótica de leguminosas Rhizobium leguminosarum

La asociación Rhizobium-leguminosa constituye una interacción planta-microorganismo particularmente beneficiosa a nivel medioambiental debido a su capacidad promotora del crecimiento vegetal en condiciones de deficiencia de nitrógeno. Se ha demostrado que una excesiva concentración de metales pesados en el suelo afecta negativamente la competitividad bacteriana y al desarrollo de interacciones diazotróficas eficientes (Chaudri et al., 2000; Pereira et al., 2006). Por otro lado, el suministro de metales como Fe, Mo, Ni o Cu es fundamental para la biosíntesis de enzimas bacterianas relacionadas con el proceso de fijación de nitrógeno que ocurre en el interior de los nódulos de las leguminosas (Moreau et al., 1995). Con objeto de identificar sistemas génicos implicados en la homeostasis de níquel en bacterias endosimbióticas, se ha llevado a cabo una mutagénesis mediante inserción aleatoria de un minitransposón derivado de Tn5 en Rhizobium leguminosarum bv. viciae UPM1137, una cepa capaz de resistir elevadas concentraciones de níquel y cobalto. Como resultado de esta mutagénesis se han obtenido 14 mutantes incapaces de crecer en medios suplementados con NiCl2. La localización de la inserción en estos mutantes muestra que una elevada proporción de los genes afectados codifican proteínas de membrana o proteínas secretadas. En paralelo, se ha obtenido la secuencia del genoma de la cepa UPM1137, lo que permite realizar estudios in silico comparando los genomas disponibles de varias cepas de R. leguminosarum bv. viciae, que presentan una menor sensibilidad a metales. El análisis bioinformático de los genomas secuenciados y la caracterización fenotípica de los mutantes obtenidos permitirá identificar potenciales sistemas de resistencia y su contribución a la homeostasis de metales.

Caracterización de la resistencia a metales pesados de cepas de Rhizobium aisladas de suelos ultramáficos y contaminados

- Caracterización de la resistencia a altas concentraciones de metales, y en especial a níquel y cobalto en las cepas objeto de estudio. - Determinar si existe una posible correlación entre la presencia del sistema hidrogenasa y la resistencia a altas concentraciones de níquel. - Determinar los mecanismos moleculares implicados en la resistencia a níquel en la cepa de Rhizobium leguminosarum más resistente identificada en este estudio.

Identificación y caracterización funcional de sistemas génicos implicados en la homeostasis de níquel en Rhizobium leguminosarum bv. viciae

La homeostasis de metales como níquel, cobalto, cobre o zinc es un proceso delicado en procariotas. Estos metales de transición son, por un lado imprescindibles para el mantenimiento del metabolismo celular, pero por otro muy tóxicos a elevadas concentraciones. Por este motivo, los microorganismos han desarrollado mecanismos para regular su concentración intracelular, tales como bombas de flujo de metales, secuestradores intra y extracelulares o enzimas detoxificadoras.

Síntese e caracterização de nanomateriais superparamagnéticos do tipo core-shell para aplicação em catálise e biomedicina

As diversas aplicações tecnológicas de nanopartículas magnéticas (NPM) vêm intensificando o interesse por materiais com propriedades magnéticas diferenciadas, como magnetização de saturação (MS) intensificada e comportamento superparamagnético. Embora MNP metálicas de Fe, Co e bimetálicas de FeCo e FePt possuam altos valores de MS, sua baixa estabilidade química dificulta aplicações em escala nanométrica. Neste trabalho foram sintetizadas NPM de Fe, Co, FeCo e FePt com alta estabilidade química e rigoroso controle morfológico. NPM de óxido metálicos (Fe e Co) também foram obtidas. Dois métodos de síntese foram empregados. Usando método baseado em sistemas nanoheterogêneos (sistemas micelares ou de microemulsão inversa), foram sintetizadas NPM de Fe3O4 e Co metálico. Foram empregados surfactantes cátion-substituídos: dodecil sulfato de ferro(III) (FeDS) e dodecil sulfato de cobalto(II) (CoDS). Para a síntese das NPM, foram estudados e determinados a concentração micelar crítica do FeDS em 1-octanol (cmc = 0,90 mmol L-1) e o diagrama de fases pseudoternário para o sistema n-heptano/CoDS/n-butanol/H2O. NPM esferoidais de magnetita com3,4 nm de diâmetro e comportamento quase-paramagnético foram obtidas usando sistemas micelares de FeDS em 1-octanol. Já as NPM de Co obtidas via microemulsão inversa, apesar da larga distribuição de tamanho e baixa MS, são quimicamente estáveis e superparamagnéticas. O segundo método é baseado na decomposição térmica de complexos metálicos, pelo qual foram preparadas NPM esféricas de FePt e de óxidos metálicos (Fe3O4, FeXO1-X, (Co,Fe)XO1-X e CoFe2O4) com morfologia controlada e estabilidade química. O método não mostrou a mesma efetividade na síntese de NPM de FeAg e FeCo: a liga FeAg não foi obtida enquanto que NPM de FeCo com estabilidade química foram obtidas sem controle morfológico. NPM de Fe e FeCo foram preparadas a partir da redução térmica de NPM de Fe3O4 e CoFe2O4, as quais foram previamente recobertas com sílica. A sílica previne a sinterização inter-partículas, além de proporcionar caráter hidrofílico e biocompatibilidade ao material. As amostras reduzidas apresentaram aumento dos valores de MS (entre 21,3 e 163,9%), o qual é diretamente proporcional às dimensões das NPM. O recobrimento com sílica foi realizado via hidrólise de tetraetilortosilicato (TEOS) em sistema de microemulsão inversa. A espessura da camada de sílica foi controlada variando-se o tempo de reação e as concentrações de TEOS e de NPM, sendo então proposto um mecanismo do processo de recobrimento. Algumas amostras receberam um recobrimento adicional de TiO2 na fase anatase, para o qual foi empregado etilenoglicol como solvente e ligante para formação de glicolato de Ti como precursor. A espessura da camada de TiO2 (2-12 nm) é controlada variando as quantidades relativas entre NPM e o precursor de Ti. Ensaios de hipertermia magnética foram realizados para as amostras recobertas com sílica. Ensaios de hipertermia magnéticas mostram grande aumento da taxa de aquecimento das amostras após a redução térmica, mesmo para dispersões diluídas de NPM (0,6 a 4,5 mg mL-1). Taxas de aquecimento entre 0,3 e 3,0oC min-1 e SAR entre 37,2 e 96,3 W g-1. foram obtidos. A atividade fotocatalítica das amostras recobertas foram próximas à da fase anatase pura, com a vantagem de possuir um núcleo magnético que permite a recuperação do catalisador pela simples aplicação de campos magnéticos externos. Os resultados preliminares dos ensaios de hipertermia magnética e fotocatálise indicam um forte potencial dos materiais aqui relatados para aplicações em biomedicina e em fotocatálise.

Quantificação do teor em metais em azeites e azeitonas da cv Cobrançosa

A olivicultura possui uma grande importância no cenário económico mundial, devido ao facto de a azeitona e o azeite fazerem parte da dieta alimentar de muitos países, especificamente os da região Mediterrânea. A “Cobrançosa” é uma cultivar Portuguesa com muita importância na região de Trás-os-Montes encontrando-se atualmente disseminada por seis regiões de Denominação de Origem Protegida. Os contaminantes emitidos para a atmosfera atingem as oliveiras e as azeitonas através da água, do ar, das plantas e do solo. Embora a ingestão de metais pesados através da azeitona e do azeite seja reduzida, a sua bioacumulação no organismo pode resultar em toxicidade e pôr em causa a saúde pública. É deste ponto de vista, que se centra o objetivo geral deste trabalho. Assim sendo, tentou-se quantificar o conteúdo de metais (de segurança e de qualidade), tais como o alumínio, arsénio, cádmio, chumbo, cálcio, cobalto, cobre, ferro, magnésio, manganês, sódio, níquel, e zinco nas azeitonas e azeites da cv “Cobrançosa” de seis clones em dois estados de maturação, com diferentes rendimentos de produção e diferentes atividades antioxidantes. Verificou-se que todos os metais analisados se encontram de acordo com o legislado e publicado por outros autores, verificando-se neste estudo particular que a componente genética que diferencia as amostras em estudo, não está significativamente relacionada com o conteúdo em metais.

Obtenção de Mo2C com adição de Co por reação gás-sólido em reator de leito fixo

Sulfur compounds emissions have been, on the late years, subject to more severe environmental laws due to its impact on the environment (causing the acid rain phenomena) and on human health. It has also been object of much attention from the refiners worldwide due to its relationship with equipment’s life, which is decreased by corrosion, and also with products’ quality, as the later may have its color, smell and stability altered by the presence of such compounds. Sulfur removal can be carried out by hydrotreating (HDT) which is a catalytic process. Catalysts for HDS are traditionally based on Co(Ni)-Mo(W)/Al2O3. However, in face of the increased contaminants’ content on crude oil, and stricter legislation on emissions, the development of new, more active and efficient catalysts is pressing. Carbides of refractory material have been identified as potential materials for this use. The addition of a second metal to carbides may enhance catalytic activities by increasing the density of active sites. In the present thesis Mo2C with Co addition was produced in a fixed bed reactor via gas-solid reaction of CH4 (5%) and H2(95%) with a precursor made of a mix of ammonium heptamolybdate [(NH4)6[Mo7O24].4H2O] and cobalt nitrate[Co(NO3)2.6H2O] at stoichiometric amounts. Precursors’ where analyzed by XRF, XRD, SEM and TG/DTA. Carboreduction reactions were carried out at 700 and 750°C with two cobalt compositions (2,5 and 5%). Reaction’s products were characterized by XRF, XRD, SEM, TOC, BET and laser granulometry. It was possible to obtain Mo2C with 2,5 and 5% cobalt addition as a single phase at 750°C with nanoscale crystallite sizes. At 700°C, however, both MoO2 and Mo2C phases were found by XRD. No Co containing phases were found by XRD. XRF, however, confirmed the intended Co content added. SEM images confirmed XRD data. The increase on Co content promoted a more severe agglomeration of the produced powder. The same effect was noted when the reaction temperature was increased. The powder synthesized at 750°C with 2,5% Co addition TOC analysis indicated the complete conversion from oxide material to carbide, with a 8,9% free carbon production. The powder produced at this temperature with 5% Co addition was only partially converted (86%)

Síntese de carreadores de oxigênio à base de Ni e Co para estudo do processo de Chemical Looping usando CH4 como combustível

Increasing energy demand is being met largely by fossil fuel reserves, which emit CO2, SOx gases and various other pollutants. So does the search for fuels that emit fewer pollutants and have the same energy efficiency. In this context, hydrogen (H2) has been increasingly recognized as a potential carrier of energy for the near future. This is because the H2 can be obtained by different routes and has a wide application area , in addition to having clean burning, generating only H2O as a product of combustion , and higher energy density per unit mass . The Chemical Looping Reforming process (CLR) has been extensively investigated in recent years, it is possible to regenerate the catalyst by applying cycles of reduction and oxidation. This work has as main objective to develop catalysts based on nickel and cobalt to study the reactivity of reform with chemical recycling process. The catalysts were prepared by three different methods: combustion assisted by microwave, wet impregnation and co-precipitation. All catalysts synthesized have the same amount by weight of the active phases (60% w / w). The other 40 % m/m consists in La2O3 (8% w / w), Al2O3 (30% w / w) and MgO (2%). Oxygen carriers have been named as follows: N or C, nickel or cobalt, followed by the number 3 or 6, meaning 30 to 60% of active phase in the oxide form and C, CI or CP, which means self-combustion assisted by microwave, self-combustion assisted by microwave followed by wet impregnation and co-precipitation. The oxygen carriers were then characterized by the techniques of X-ray diffraction (XRD), surface area (BET), temperature programmed reduction (TPR) and scanning electron microscopy (SEM). The characterization results showed that the different synthesis methods have led to obtaining different morphologies and structures. Redox tests using CH4 as reducing agent and sintetic air as oxidant agent was done with N6C and C6C, N6CI and C6CI and N6CP and C6CP oxygen carriers. The tests revealed different behaviors, depending on active phase and on synthesis procedure. N6C oxygen carrier produced high levels of H2. The C6CI oxygen carrier produced CO2 and H2O without carbon deposits.

Síntese e caracterização de PSFC (Pr0,5Sr0,5Fe1-xCuxO3-δ, sendo x=0,2 e x=0,4) para aplicação como catodo de células a combustível de óxido sólido

The PSFC (Pr0.5Sr0.5Fe1-xCuxO3-δ) is a new mixed oxide perovskite and has been studied and evaluated the cathode materials for intermediate temperature solid oxide fuel cells (IT-SOFCs), mainly due to its good compatibility with the electrolyte (CGO) and its high ionic conductivity and electronic in intermediate temperature. In this work, PSFC powders with two different compositions (Pr0,5Sr0,5Fe0,8Cu0,2O3- PSFC5582 and Pr0,5Sr0,5Fe0,6Cu0,4O3-PSFC5564) were synthesized by the citrate method using a new route. The powders obtained were characterized by thermal analysis (Differential Scanning Calorimetry and Thermogravimetry), and the material calcined at 800, 900 and 1000 °C for 5h were analyzed by X-ray diffractometry (XRD), with the Rietveld refinement of the diffraction data and dilatometry. PSFC5582 composite films were obtained by screen printing of powder calcined at 1000 °C. The films were deposited on substrate ceria doped with gadolinia (CGO) and then sintered at 1050 °C for 2h. The electrochemical performance of the electrodes was evaluated by impedance spectroscopy and the interface electrode/electrolyte was observed by scanning electron microscopy (SEM). The specific resistance area (ASR) was 0.44 Ω.cm² at 800 °C, slightly lower than those reported in the literature for cathodes containing cobalt. The thermal expansion coefficients of both the PSFC compositions were obtained and varied between 13 and 15 x 10-6 °C-1 , in a temperature range of 200 to 650 °C, demonstrating the good thermal compatibility of cathodes with Ce0,9Gd0,1O1,95 electrolytes (CET = 12 x 10-6 °C).

Estudo da eficiência eletroquímica para tratamento de chorume gerado em aterro sanitário brasileiro

This work was performing effluent degradation studies by electrochemical treatment. The electrochemical oxidation (EO) hydroquinone (H2Q) was carried out in acid medium, using PbO2 electrode by galvanostatic electrolysis, applying current densities of 10 and 30 mA/cm2 . The concentration of H2Q was monitored by differential pulse voltammetry (DPV). The experimental results showed that the galvanostatic electrolysis process performance significantly depends on the applied current density, achieving removal efficiencies of 100% and 80 % and 10 applying 30 mA/cm2 , respectively. Furthermore, the electroanalytical technique was effective in H2Q be used as a detection method. In order to test the efficiency of PbO2 electrode, the electrochemical treatment was conducted in an actual effluent, leachate from a landfill. The liquid waste leachate (600ml effluent) was treated in a batch electrochemical cell, with or without addition of NaCl by applying 7 mA/cm2 . The efficiency of EO was assessed against the removal of thermo-tolerant coliforms, total organic carbon (TOC), total phosphorus and metals (copper, cobalt, chromium, iron and nickel). These results showed that efficient removal of coliforms was obtained (100%), and was further decrease the concentration of heavy metals by the cathode processes. However, results were not satisfactory TOC, achieving low total removal of dissolved organic load. Because it is considered an effluent complex were developed other tests with this effluent to monitor a larger number of decontamination parameters (Turbidity, Total Solids, Color, Conductivity, Total Organic Carbon (TOC) and metals (barium, chromium, lithium, manganese and Zinc), comparing the efficiency of this type of electrochemical treatment (EO or electrocoagulation) using a flow cell. In this assay was compared to electro streaming. In the case of the OE, Ti/IrO2-TaO5 was used as the anode, however, the electrocoagulation process, aluminum electrodes were used; applying current densities of 10, 20 and 30 mA/cm2 in the presence and absence of NaCl as an electrolyte. The results showed that EO using Ti/IrO2–TaO5 was anode as efficient when Cl- was present in the effluent. In contrast, the electrocoagulation flow reduces the dissolved organic matter in the effluent, under certain experimental conditions.

Síntese e caracterização de nanopartículas magnéticas de Co e Ni com aplicação em magneto hipertermia

Nanoparticles are importante for the study of new phenomena and for the development of new applications. Metallic magnetic nanoparticles like Cobalt and Nickel are important for their applications in nanoscience and nanotechnology. In this work, we report on the synthesis and characterization of Ni and Co nanoparticles. The nanoparticles were prepared by the modi- ed sol-gel method and were formed in the pore-network of the biopolymer quitosan. The reduction occurred in absence of H2 ux. The metallic particles and their monoxides have a face-centered- cubic structure. The metallic particles sizes ranged from 59 to 77 nm and from 19 to 50 nm for Ni and Co, respectively. Their monoxides chemically passivated the metallic cores, and after several weeks we have not observed further increase in oxidation. The synthesis method was tuned to obtain mainly the ferromagnetic phase. The system behaves like a core/shell structure with a ferromagnetic core and an antiferromagnetic shell. Exchange bias e ect was observed at temperatures below the Néel temperature. Both systems were submitted to an alternated magnetic eld and the heat released by the particles increased the temperature to 140°C in an interval of 5 min. Similar studies in samples dispersed in water increased the temperatures to 40-59°C, these results suggest that these materials are candidates for magnetic hyperthermia.

Efeito da adição de WC e Co na sinterização e propriedades mecânicas da alumina

Composites based on alumina (Al2O3), tungsten carbide (WC) and cobalt (Co) exhibit specific properties such as low density, high oxidation resistance, high melting point and high chemical inertia. That composite shows to be a promising material for application in various fields of engineering. In this work, the mechanical properties of the composite (Al2O3 – WC – Co), particularly density and hardness, were evaluated according to the effects of the variables of powder processing parameters, green compact and sintered. Powder composites with the composition of 80 wt% Al2O3, 18 wt% WC and 2 wt% Co were processed by high energy ball milling in a planetary mill for 50 hours as well as mixed by manual mixing in a glass vessel with the same proportion. Samples were collected (2, 10, 20, 30, 40 and 50 hours) during the milling process. Then, the powders were compacted in a cylindrical die with 5 mm in diameter in a uniaxial press with pressures of 200 and 400 MPa. The sintering was in two stages: first, the solid phase sintering was performed at 1126 and 1300 °C for 1 hour with a heating rate of 10 °C/min in a resistive furnace under argon atmosphere for green samples compacted in 200 and 400 MPa; the second sintering was performed on dilatometer in solid phase at 1300 °C for green sample compacted in 200 MPa, another sintering also was performed on dilatometer, this time in liquid phase at 1550 °C for green samples compacted in 200 and 400 MPa, with the same parameters used in resistive furnace. The raw materials were characterized by X – ray diffraction (XRD), X – ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and laser particlemeter. The sintered samples were subjected to microhardness testing. The results showed that high energy milling achieved to the objectives regarding the particle size and the dispersion of composite phases. However, the hardness did not achieve to significant results, this is an indication that the composite has low fracture toughness.