Trace elements quantification in Portuguese red wines

Dissertation for the Degree of Master in Technology and Food Safety – Food Quality

Fate Hazardous elements in soils surrounding a coal-fired power plant complex

Proceedings of the 13th International UFZ-Deltares Conference on Sustainable Use and Management of Soil, Sediment and Water Resources - 9–12 June 2015 • Copenhagen, Denmark

Impact of multi-metals (Cd, Pb and Zn) exposure on the physiology of the yeast Pichia kudriavzevii

Metal contamination of the environment is frequently associated to the presence of two or more metals. This work aimed to study the impact of a mixture of metals (Cd, Pb and Zn) on the physiology of the non-conventional yeast Pichia kudriavzevii. The incubation of yeast cells with 5 mg/l Cd, 10 mg/l Pb and 5 mg/l Zn, for 6 h, induced a loss of metabolic activity (assessed by FUN-1 staining) and proliferation capacity (evaluated by a clonogenic assay), with a small loss of membrane integrity (measured by trypan blue exclusion assay). The staining of yeast cells with calcofluor white revealed that no modification of chitin deposition pattern occurred during the exposure to metal mixture. Extending for 24 h, the exposure of yeast cells to metal mixture provoked a loss of membrane integrity, which was accompanied by the leakage of intracellular components. A marked loss of the metabolic activity and the loss of proliferation capacity were also observed. The analysis of the impact of a single metal has shown that, under the conditions studied, Pb was the metal responsible for the toxic effect observed in the metal mixture. Intracellular accumulation of Pb seems to be correlated with the metals' toxic effects observed.

Trace Elements in Ambient Air at Porto Metropolitan Area—Checking for Compliance with New European Union (Eu) Air Quality Standards

Because of the scientific evidence showing that arsenic (As), cadmium (Cd), and nickel (Ni) are human genotoxic carcinogens, the European Union (EU) recently set target values for metal concentration in ambient air (As: 6 ng/m3, Cd: 5 ng/m3, Ni: 20 ng/m3). The aim of our study was to determine the concentration levels of these trace elements in Porto Metropolitan Area (PMA) in order to assess whether compliance was occurring with these new EU air quality standards. Fine (PM2.5) and inhalable (PM10) air particles were collected from October 2011 to July 2012 at two different (urban and suburban) locations in PMA. Samples were analyzed for trace elements content by inductively coupled plasma–mass spectrometry (ICP-MS). The study focused on determination of differences in trace elements concentration between the two sites, and between PM2.5 and PM10, in order to gather information regarding emission sources. Except for chromium (Cr), the concentration of all trace elements was higher at the urban site. However, results for As, Cd, Ni, and lead (Pb) were well below the EU limit/target values (As: 1.49 ± 0.71 ng/m3; Cd: 1.67 ± 0.92 ng/m3; Ni: 3.43 ± 3.23 ng/m3; Pb: 17.1 ± 10.1 ng/m3) in the worst-case scenario. Arsenic, Cd, Ni, Pb, antimony (Sb), selenium (Se), vanadium (V), and zinc (Zn) were predominantly associated to PM2.5, indicating that anthropogenic sources such as industry and road traffic are the main source of these elements. High enrichment factors (EF > 100) were obtained for As, Cd, Pb, Sb, Se, and Zn, further confirming their anthropogenic origin.

Integration of sediment contamination with multi–biomarker responses in a novel bioindicator candidate (Sepia officinalis) for risk assessment in impacted estuaries

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente

Heavy metals removal in dual media filters

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente – Perfil de Engenharia Sanitária

Caracterização do comportamento à fadiga de instrumentos de Ni-Ti para aplicações de endodontia

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

The influence of CD 4+t cells, hiv disease stage and zidovudine on hiv isolation in Bahia, Brazil

HIV-l isolation was attempted on 72 individuais, including persons with knoum HIV infection and five without proven HIV infection but with indeterminate Western blot patterns, as well as on low-risk HIV seronegative persons. The ahility to detect HIV- 1 frorn culture supernatant by p24 antigen capture assay was evaluated by segregating patients by absolute CD4+ cell counts, clinicai stage of disease, p24 antigenemia and zidovudine use. The likelihood of a p24 positive HIV culture was highest among patients with CD4+ T-cell counts below 200/ul and patients with advanced clinical disease. Use of zidovudine did not affect the rate ofHIV positwity in cultures.

Ni inclusion ni exclusion, mais plutôt un autre espace

Ce texte présente une partie des résultats d’une recherche dont le terrain est constitué par trois localités – une ville (Guimarães), un village (Vizela) et un bourg (Santa Eulália). Notre étude porte sur les représentations de l’espace, que l’on considère comme partie des composantes culturelles qui intègrent les processus de constitution des identités collectives. Les configurations spatiales qui correspondent aux représentations de chaque communauté sont présentes dans les processus de négociation spatial que les trois localités établissent entre elles, en vue de la constitution d’un espace d’ensemble compatible. L’identité de chacune dépend donc de la forme que prend l’espace régional qui comprend les trois localités étudiées. L’étude de cas (Vizela) démontre, dans une situation de transformation du territoire, qu’une double contrainte, organisée par l’inclusion et l’exclusion, conduit à la projection d’un nouvel espace - d’inclusion spatiale, sociale et symbolique - qui constitue une nouvelle réponse à l’imbrication des espaces organisés par différentes villes. Le refus d’une inclusion régionale conduit à la création/revendication d’un nouveau découpage spatial, défini à une échelle plus restreinte, et ce processus se transforme en un point de fixation identitaire.

The main leachate emissions of uncontrolled landfills

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente, Perfil de Engenharia Sanitária

A aprendizagem e o ensino do método cartesiano no plano com o CD-ROM da escola virtual

Esta investigação visa estudar a forma como os materiais educativos em ambientes interactivos e dinâmicos, no CD-ROM da Escola Virtual, desenvolvem a competência dos alunos na aprendizagem da geometria e em particular, no tema relativo ao método cartesiano no plano. A metodologia de investigação insere-se no paradigma interpretativo e segue uma abordagem qualitativa. Foi seleccionada uma turma do 11.º ano de escolaridade de um curso profissional, de uma Escola Secundária do distrito de Lisboa. A recolha de dados decorreu ao longo de dois meses, e recorreu a técnicas diversas como observação das aulas, questionários, registo vídeo, entrevistas e seu registo áudio. Os resultados obtidos neste estudo permitem concluir que a utilização do CDROM da Escola Virtual foi muito vantajosa no desenvolvimento do método cartesiano do plano e que a interactividade e animação gráfica presente contribuíram para uma boa compreensão dos conteúdos. Contudo, verificou-se que as potencialidades, dinâmicas e interactivas desta ferramenta nem sempre são suficientes e eficazes para a compreensão e apropriação de conceitos, por parte dos alunos. Quando os alunos não conseguem acompanhar as explicações no CD-ROM, o professor tem um papel preponderante, no sentido de os orientar, na procura de informação, ou de os ajudar na superação das dificuldades. Também permitiu concluir, que a utilização do CD-ROM influenciou de modo positivo a motivação dos alunos e favoreceu o trabalho colaborativo. A aprendizagem dos conceitos matemáticos processou-se a partir das interacções entre os grupos e entre os elementos de cada grupo, e através das acções mediadas pelos artefactos, designadamente o CD-ROM da Escola Virtual e seus recursos.

Development of bio-batteries based on electrospun membranes

Fundação para a Ciência e a Tecnologia (FCT-MCTES) under the grant SFRH/BD/69306/2010

Efeito do teor em Y2O3 nos catalisadores suportados de 8%Ni/α-Al2O3 durante a reação de oxidação parcial do Metano para produção de Hidrogénio

Neste trabalho avaliou-se o desempenho de cinco catalisadores de Níquel suportados em α-Alumina, com diferentes teores em Ítria, durante a reação de Oxidação Parcial do Metano para a produção de Hidrogénio: 8%Ni/α-Al2O3, 8%Ni/2%Y2O3.α-Al2O3, 8%Ni/2,5%Y2O3.α-Al2O3, 8%Ni/5%Y2O3.α-Al2O3 e 8%Ni/Y2O3. Foram realizados testes catalíticos numa Unidade de Reação acoplada a um equipamento de análise, microGC. A reação decorreu à temperatura de 800 °C, num reator laboratorial de quartzo, durante 18 horas, com uma mistura pura de CH4 e O2 (Condição Concentrada). Os resultados demonstraram um aumento de atividade para os catalisadores de suporte misto com maior teor em Y2O3. Usando o mesmo procedimento, a reação de OPM foi realizada também para outra mistura reacional de CH4 e O2, mas agora diluída em Hélio (Condição Diluída). Estes resultados permitiram avaliar a velocidade de reação e a atividade dos catalisadores (TOF), para diferentes valores de temperatura, numa situação inicial de ausência de coque. Numa segunda etapa, avaliou-se o desempenho dos mesmos materiais durante 2 horas de reação à temperatura constante de 800 ℃. Finalmente, através da técnica de caraterização de XPS, identificaram-se as espécies presentes na superfície dos catalisadores. Os resultados sugerem que há formação de um composto intermediário NiYO3 formado entre o metal e o promotor Y2O3, conferindo atividade e estabilidade aos catalisadores e reduzindo a deposição de coque. O catalisador com maior teor em Y2O3 (8%Ni/5%Y2O3.α-Al2O3) foi o mais beneficiado com a adição do promotor, demonstrando melhor desempenho para a produção de H2 na Reação de Oxidação Parcial do Metano.

Historic and potential technology transition paths of grid battery storage: Co-evolution of energy grid, electric mobility and batteries

Scarcity of fuels, changes in environmental policy and in society increased the interest in generating electric energy from renewable energy sources (RES) for a sustainable energy supply in the future. The main problem of RES as solar and wind energy, which represent a main pillar of this transition, is that they cannot supply constant power output. This results inter alia in an increased demand of backup technologies as batteries to assure electricity system safety. The diffusion of energy storage technologies is highly dependent on the energy system and transport transition pathways which might lead to a replacement or reconfiguration of embedded socio-technical practices and regimes (by creating new standards or dominant designs, changing regulations, infrastructure and user patterns). The success of this technology is dependent on hardly predictable future technical advances, actor preferences, development of competing technologies and designs, diverging interests of actors, future cost efficiencies, environmental performance, the evolution of market demand and design and evolution of our society.

Smart platform towards batteries analysis based on internet-of-things

This paper presents a new approach of pre-defined profiles, based in different voltage and current values, to control the charging and discharging processes of batteries in order to assess their performance. This new approach was implemented in a prototype that was specially developed for such purpose. This prototype is a smart power electronics platform that allows to perform batteries analysis and to control the charging and discharging processes through a web application using pre-defined profiles. This platform was developed aiming to test different batteries technologies. Considering the relevance of the energy storage area based in batteries, especially for the batteries applied to electric mobility systems, this platform allows to perform controlled tests to the batteries, in order to analyze the batteries performance under different scenarios of operation. Besides the results obtained with the batteries, this work also intends to produce results that can contribute to an involvement in the strengthening of the Internet-of-Things.