Hierarchical Assembly of CaMoO4 Nano-Octahedrons and Their Photoluminescence Properties

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Packaging to Preserve 'Aurora-1' Peaches from Two Maturity Stages

The main objective of this research was to evaluate chemical and physical changes in 'Aurora-1' peach harvested at two maturity stages, packed in different types of packaging and kept under refrigeration. Fruit were harvested at the mature green and ripe stages, packed in four different types of packaging (control, PD-900 (TM), PVC and PET) and stored at 6 degrees C. The following variables were evaluated every eight days: coloration, accumulated fresh mass loss, firmness, appearance, acidity, total soluble solids contents, soluble sugars, and percentage of pectin solubilization. We observed that the postharvest life was influenced by packaging and the mature green fruits showed lower disease occurrence. Fresh mass loss was lower in packed fruits. The peel of mature green fruits developed a characteristic ripe peach color at the end of storage, but PD-900 (TM) provided a delay in color change. Packaging also influenced the firmness, allowing for more firmness retention than for the control fruits at both harvest stages. The organic acid content decreased in the packaged fruits and increased in the control fruits. In the packaged fruit, the amount of sugar increased until the eighth day and then decreased until the end of the storage period. The 'Aurora-1' peaches did not show compromised quality by packaging use and exhibited an increase in harvest life to 24 days (compared to 16 days for the control).

Luminescent nano-composites generated from a spray

The spray-pyrolysis (SP) synthesis technique has been employed to obtain SiO2:Eu3+ and gamma-AlOOH:Eu3+, It was possible to obtain sub-micrometric spherical particles of SiO2 with luminescent Eu3+ ions bonded to the silica surface or embedded in amorphous silica beads, by controlling the synthesis and annealing process. Boehmite y-AlOOH doped with Eu3+ nanoparticles were synthesized by SP at moderate temperature (200 degrees C) with Eu3+ ions bonded to the surface hydroxyls of the boehmite nanocrystals. Luminescent nanocomposites were obtained by controlled reaction of gamma-AlOOH:Eu3+ nanocrystals with ASN (asparagine). In these nano-composites, the Eu3+ are held at the surface of the boehmite nanocrystals and partially shielded from interactions with additional luminescence quenchers (hydroxyl groups, water molecules). (C) 2008 Elsevier B.V. All rights reserved.

Growth of silver nano-particle embedded in tellurite glass: Interaction between localized surface plasmon resonance and Er3+ ions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Magnetic domain states in nano-sized Co nuclei electrodeposited onto monocrystalline silicon

In the present work, nano-sized magnetic nuclei of Co have been electrodeposited onto p-Si (111). The deposition follows a mechanism of progressive nucleation and growth controlled by diffusion. MFM studies showed that the transition between magnetic domain states is strongly dependent on the size and shape of the nuclei. A critical height h0 is defined below which the nuclei presented always a single-domain configuration. The limiting lower boundary for the single-domain state calculated from the theory is quantitatively coincident with the experimental results. © 2004 Elsevier B.V. All rights reserved.

Initial concentration profile influence on migration measurements from plastic packaging: A simulation study

Migration of components from plastic packaging into foodstuffs or into medicines is a very important issue, concerning public health. Using experimental techniques, like gas chromatography-mass spectrometry, these essays measure total migration and specific migration of components from plastic packaging. This work presents an explanation and applications of a numerical technique tool for this measurement, allowing the comprehension of the diffusion process and the estimate of component migration in difficult or impractical measurements. As an application example, the non-uniform influence of initial concentration profile on the migration is presented, demonstrating the necessity of this profile determination for high quality considerations on involved metrology.

Development of starch biobased and biodegradable plastics for their use in trays for food-packaging

This research work develops new methods to produce biodegradable starch-based trays for the purpose of replacing expanded polystyrene in the food packaging market. The starch based biopolymers present several drawbacks like poor mechanical properties and very high density. In order to overcome these drawbacks two research lines have been set up: blending thermoplastic starch with biobased reinforcements from agricultural wastes like barley straw and grape wastes, and testing the foamability of these materials with a Microwave-foaming method.

Packaging controlled experiments using an evolutionary approach based on ontology

A body of knowledge in Software Engineering requires experiments replications. The knowledge generated by a study is registered in the so-called lab package, which, must be reviewed by an eventual research group with the intention to replicate it. However, researchers face difficulties reviewing the lab package, what leads to problems in share knowledge among research groups. Besides that, the lack of standardization is an obstacle to the integration of the knowledge from an isolated study in a common body of knowledge. In this sense, ontologies can be applied, since they can be seen as a standard that promotes the shared understanding of the experiment information structure. In this paper, we present a workflow to generate lab packages based on EXPEiiQntology, an ontology of controlled experiments domain. In addition, by means of lab packages instantiation, it is possible to evolve the ontology, in order to deal with new concepts that may appear in different lab packages. The iterative ontology evolution aims at achieve a standard that is able to accommodate different lab packages and, hence, facilitate to review and understand their content.

A simple procedure for the preparation of laponite and thermoplastic starch nanocomposites: Structural, mechanical, and thermal characterizations

The aim of this article is to propose advances for the preparation of hybrid nanocomposites prepared by the combination of intercalation from solution and melt-processing methods. This research investigates the effect of the laponite RDS content on the thermal, structural, and mechanical properties of thermoplastic starch (TPS). X-ray diffraction was performed to investigate the dispersion of the laponite RDS layers into the TPS matrix. The results show good nanodispersion, intercalation, and exfoliation of the clay platelets, indicating that these composites are true nanocomposites. The presence of laponite RDS also improves the thermal stability and mechanical properties of the TPSmatrix due to its reinforcement effect which was optimized by the high degree of exfoliation of the clay. Thus, these results indicate that the exfoliated TPS-laponite nanocomposites have great potential for industrial applications and, more specifically, in the packaging field. © The Author(s) 2011 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Optically transparent membrane based on bacterial cellulose/ polycaprolactone

Optically transparent membranes from bacterial cellulose (BC)/polycaprolactone (PCL) have been prepared by impregnation of PCL acetone solution into dried BC membranes. UV-Vis measurements showed an increase on transparency in BC/PCL membrane when compared with pristine BC. The good transparency of the BC/PCL can be related to the presence of BC nanofibers associated with deposit of PCL nano-sized spherulites which are smaller than the wavelength of visible light and practically free of light scattering. XRD results show that cellulose type I structure is preserved inside the BC/PCL membrane, while the mechanical properties suggested indicated that PCL acts as a plasticizer for the BC membrane. The novel BC/PCL membrane could be used for preparation of fully biocompatible flexible display and biodegradable food packaging.

Development of a new method to prepare nano-/microparticles loaded with extracts of azadirachta indica, their characterization and use in controlling plutella xylostella

Biodegradable nanoparticles have been widely explored as carriers for controlled delivery of therapeutic molecules; however, studies describing the development of nanoparticles as carriers for biopesticide products are few. In this work, a new method to prepare nanoparticles loaded with neem (Azadirachta indica) extracts is presented. In this study, nanoparticles were formulated as colloidal suspension and (spray-dried) powder and characterized by evaluating pH, particle size, zeta potential, morphology, absolute recovery, and entrapment efficiency. A high-performance liquid chromatography method was used for nanoparticle characterization. The best formulations presented absolute recovery and entrapment efficiencies of approximately 100% and a release profile based on swelling and relaxation of the polymer or polymer erosion. The biological data of the formulated products against Plutella xylostella showed 100% larval mortality. The nanoparticle information improved the stability of neem products against ultraviolet radiation and increased their dispersion in the aqueous phase. © 2013 American Chemical Society.

Fish exposure to nano-TiO2 under different experimental conditions: Methodological aspects for nanoecotoxicology investigations

The ecotoxicology of nano-TiO2 has been extensively studied in recent years; however, few toxicological investigations have considered the photocatalytic properties of the substance, which can increase its toxicity to aquatic biota. The aim of this work was to evaluate the effects on fish exposed to different nano-TiO2 concentrations and illumination conditions. The interaction of these variables was investigated by observing the survival of the organisms, together with biomarkers of biochemical and genetic alterations. Fish (Piaractus mesopotamicus) were exposed for 96h to 0, 1, 10, and 100mg/L of nano-TiO2, under visible light, and visible light with ultraviolet (UV) light (22.47J/cm2/h). The following biomarkers of oxidative stress were monitored in the liver: concentrations of lipid hydroperoxide and carbonylated protein, and specific activities of superoxide dismutase, catalase, and glutathione S-transferase. Other biomarkers of physiological function were also studied: the specific activities of acid phosphatase and Na,K-ATPase were analyzed in the liver and brain, respectively, and the concentration of metallothionein was measured in the gills. In addition, micronucleus and comet assays were performed with blood as genotoxic biomarkers. Nano-TiO2 caused no mortality under any of the conditions tested, but induced sublethal effects that were influenced by illumination condition. Under both illumination conditions tested, exposure to 100mg/L showed an inhibition of acid phosphatase activity. Under visible light, there was an increase in metallothionein level in fish exposed to 1mg/L of nano-TiO2. Under UV light, protein carbonylation was reduced in groups exposed to 1 and 10mg/L, while nucleus alterations in erythrocytes were higher in fish exposed to 10mg/L. As well as improving the understanding of nano-TiO2 toxicity, the findings demonstrated the importance of considering the experimental conditions in nanoecotoxicological tests. This work provides information for the development of protocols to study substances whose toxicity is affected by illumination conditions. © 2013 Elsevier B.V..

Clareamento dental com perôxido de hidrogênio contendo nano partículas de óxido de titânio como semicondutor: efeito de concentrações, tempos e formas de ativação

Pós-graduação em Ciências Odontológicas - FOAR

Construção, estudo analítico e aplicação físico-química do eletrodo 'PT'|'HG'|'HG IND.2 C IND.2 O IND.4'| grafite, em meio aquoso de 'NACLO IND.4' e 'NANO IND.3'

Pós-graduação em Química - IQ

Aplicação de métodos teóricos na investigação da transferência auto-consistente de elétrons em nano-retificador orgânico

Neste trabalho apresentamos um estudo teórico da estrutura eletrônica de uma molécula do tipo Doador-dinitrobenzene e um grupo Aceitador-dihydrophenazine (D-A) com pontes poliênicas variando de π = 0 à π = 10. Trata-se de um sistema promissor para o desenvolvimento de retificadores moleculares, que sob dopagem química podem vir a adquirir propriedades elétricas de material condutor. E ainda, sob ação de campo elétrico externo apresenta comportamento equivalente ao de dispositivos usuais, mas com inúmeras vantagens como, por exemplo, tamanho extremamente reduzido e intensa resposta ótica em regime não-linear. Para estudar esse sistema, fizemos otimizações de geometria sistematicamente, levando em conta cálculos de ZINDO/S-CIS (Zerner´s Intermediate Neglect of Differential Orbital/Spectroscopic – Configuration Interaction Single) que utilizam 220 configurações em média. Observamos uma transferência eletrônica calculada por métodos derivados de Hartree-Fock. Nossos resultados mostram uma delocalização bem definida dos Orbitais Moleculares de Fronteira (OMFs) HOMO[LUMO] nos grupos D[A] para molécula com ponte poliênica relativamente grande. Para estruturas com ponte poliênica relativamente pequena o contrário é observado, e uma uniformidade dos OMFs nos terminais DA é verificada. O que indicaria que somente as estruturas com ponte poliênica relativamente grande seriam promissoras pra criação de dispositivos, tendo LUMO como canal de condução. Um estudo detalhado do rearranjo de carga molecular para a mesma estrutura, sob a ação de um campo elétrico externo mostrou que o transporte de carga no grupo D[A] independe do tamanho da ponte poliênica. A voltagem aplicada é intensa o bastante para criar um potencial de saturação para este sistema com grupos DA muito próximos (evidenciando uma região de saturação e uma região de operação para sistemas com pontes pequenas), normalmente presente e sistemas com ponte molecular relativamente grande e nos dispositivos semicondutores macroscópicos. Acreditamos que o OMF LUMO desempenha um papel importante no que diz respeito ao transporte de carga em estruturas relativamente grandes, seguido de falhas em estruturas moleculares onde o grupo D está muito próximo do A. Nossos resultados mostram que temos um retificador molecular que pode trabalhar corretamente como um retificador macroscópico.