Estudios sobre la distribución de recubrimientos NSR y SCR en catalizadores monolíticos de doble capa para la eliminación de NOx

Título: Estudios sobre la distribución de recubrimientos NSR y SCR en catalizadores monolíticos de doble capa para la eliminación de NOx. Resumen: el desarrollo tecnológico, la necesidad inherente del transporte y el crecimiento exponencial de la población en los últimos 50 años han incrementado el número de vehículos motorizados de forma masiva. Como consecuencia, la contaminación del aire cada vez más evidente se ha convertido en un problema crítico a nivel global que es necesario remediar. La principal problemática de los vehículos diesel es el incremento de las emisiones de NOx debido a sus condiciones de operación (atmosfera oxidante). Para el control de las emisiones de NOx y el cumplimiento de la normativa Euro 6 que está por llegar, se han desarrollado tecnologías como la basada en el almacenamiento y reducción de NOx (NSR) o la reducción catalítica selectiva (urea – SCR). Sin embargo, la tecnología NSR no es capaz de cumplir los estándares establecidos debido a la producción de NH3 nocivo como subproducto y la tecnología SCR requiere de un costoso y voluminoso tanque de urea difícil de incorporar en el sistema. Una alternativa para lidiar con ambos problemas es la combinación de ambas tecnologías a través de catalizadores monolíticos de doble capa NSR – SCR. Esta combinación es capaz de aprovechar el NH3 generado en el catalizador aguas abajo NSR para reducir una cantidad de NOx adicional en el catalizador aguas arriba SCR sin la necesidad de incorporar un sofisticado sistema de alimentación de urea para la completa eliminación. El objetivo principal de este trabajo es estudiar el mecanismo de eliminación de NOx en esta clase de catalizadores combinados.

Analysis and adsorption of phosalone on aquatic sediment

Phosalone is a non systematic, wide spectrum organophosphate pesticide which was discovered in 1961 in the laboratories of the Societe des Usines Chimique Rhone-Poulenc in France. It has been approved for commercial use since 1964 in France, in Australia since 1966, in the United Kingdom in 1967 and in many other countries including Japan, Egypt, USSR and the USA. This study provides a full literature review on all aspects of phosalone including its physical, biological and chemical characteristics, and analytical methods of analysis with particular reference to soils/sediments. Furthermore, it aims to develop a method for the determintion of phosalone in aquatic sediments and to determine the adsorption of phosalone onto kaolinite.

Research on operating conditions at the catalytic reactor for the combined removal of NOx and PCDD/PCDFs from MWI plants

The management of municipal solid waste (MSW), particularly the role of incineration, is currently a subject of public debate. Incineration shows to be a good alternative of reducing the volume of waste and eliminating certain infectious components. Moreover, Municipal Waste Incinerators (MWI), are reported to be highly hygienic and apart from that MWIs are immediately effective in terms of transport (incinerators can be built close to the waste sources) and incineration's nature. Nevertheless, the emissions of many hazardous substances make the Municipal Waste Incineration (MWI) plants to be unpopular. Metals (especially lead, manganese, cadmium, chromium and mercury) are concentrated in fly and bottom ashes. Furthermore, incomplete combustion produces a wide variety of potentially hazardous organic compounds, such as aldehydes, polycyclic aromatic hydrocarbons (PAH), chlorinated hydrocarbons including polychlorinated dibenzodioxins (PCDD) and dibenzofurans (PCDF), and even acid gases, including NOx. Many of these hazardous substances are carcinogenic and some have direct systemic toxicity.

Estudo da redução do NO pelo CO usando catalisadores de ródio suportado em óxido misto de cério e zircônio e óxido misto derivado de hidrotalcita

Esta tese teve como objetivo avaliar o desempenho de catalisadores de Rh suportados em cério-zircônio (CZ) e em óxido misto de magnésio e alumínio (HT) derivado de hidrotalcita na reação de redução do NO pelo CO em meio estequiométrico. Os suportes puros e impregnados com Rh foram nomeados CZ, RhCZ, HT e RhHT. Os suportes foram preparados por coprecipitação e o metal nobre foi adicionado no teor de 0,15% (m/m) por impregnação a seco. Foram realizados testes de caracterização como fisissorção de N2, DRX, TPR, espectroscopia Raman, DRIFTS, TGA-DTA e TPD-CO/NO. Para a avaliação catalítica, foi utilizada uma mistura de 1%NO + 1%CO em He e a atividade e seletividade foram expressas através das concentrações dos gases envolvidos ao longo de uma rampa de temperatura desde a temperatura ambiente até 500C. Os resultados de caracterização indicaram nítidas diferenças estruturais e físico-químicas entre os dois tipos de catalisadores nas isotermas de adsorção de N2, nos perfis de redução e nos difratogramas, já dando indícios de que os mecanismos de reação seriam diferentes. Pelas análises de DRIFTS identifica-se a presença de bandas características de espécies de CO adsorvidas no Rh somente para o catalisador RhCZ a baixa temperatura, ressaltando a interação Rh-CZ, também evidenciadas pelos resultados de Raman, mas que provavelmente não ocorrem com o óxido misto de Al e Mg. Observou-se que o suporte de CZ foi mais ativo a baixas temperaturas que o suporte de HT, porém o catalisador RhHT foi mais seletivo a N2 a 350C e emitiu menos N2O ao longo da faixa de temperatura avaliada do que o catalisador RhCZ. Resultados de TPD de NO e comparações de curvas experimentais e teóricas envolvendo as concentrações de CO, CO2 e NOx durante os testes catalíticos, acompanhados também pelas análises de DRIFTS nas mesmas condições, indicam que a redução do Rh e a afinidade do catalisador pelo NO são importantes para favorecer a maior seletividade da reação de redução do NO pelo CO a N2.

Comparison between granular pillared, organo- and inorgano-organo-bentonites for hydrocarbon and metal ion adsorption

Granular reactive materials have higher permeability and are therefore desirable for in situ groundwater pollution control. Three granular bentonites were prepared: an Al-pillared bentonite (PBg), an organo-bentonite (OBg) using a quaternary ammonium cation (QAC), and an inorgano-organo-bentonite (IOBg), using both the pillaring agent and the QAC. Powdered IOB (IOBp) was also prepared to test the effect of particle size. The modified bentonites were characterised with X-ray diffraction (XRD), Fourier transform infrared spectrometry (FT-IR), thermal gravimetric analysis (TGA) and uniaxial compression tests. The d-spacing increased only with QAC intercalation. The Young's modulus of IOBg was twice as high as OBg. Batch adsorption tests were performed with aqueous multimetal solutions of Pb2+, Cu2+, Cd2+, Zn2+ and Ni2+ ions, with liquid dodecane and with aqueous dodecane solutions. Metal adsorption fit the Langmuir isotherm. Adsorption occurred within 30min for PBg, while the granular organo-bentonite needed at least 12h to reach equilibrium. IOBp had the maximum adsorption capacity at higher metal concentration and lower adsorbent content (Cu2+: 2.2, Ni2+: 1.7, Zn2+: 1.4, Cd2+: 0.9 and Pb2+: 0.7 all in mmolg-1). The dual pillaring of the QAC and Al hydroxide increased the adsorption. The adsorption of liquid dodecane was in the order IOBg>OBg>PBg (3.2>2.7>1.7mmolg-1). Therefore IOBg has potential for the removal of toxic compounds found in soil, groundwater, storm water and wastewater. © 2012 Elsevier B.V.

A comprehensive study of lysozyme adsorption using dual polarization interferometry and quartz crystal microbalance with dissipation.

Protein adsorption plays a crucial role in biomaterial surface science as it is directly linked to the biocompatibility of artificial biomaterial devices. Here, elucidation of protein adsorption mechanism is effected using dual polarization interferometry and a quartz crystal microbalance to characterize lysozyme layer properties on a silica surface at different coverage values. Lysozyme is observed to adsorb from sparse monolayer to multilayer coverage. At low coverage an irreversibly adsorbed layer is formed with slight deformation consistent with side-on orientation. At higher coverage values dynamic re-orientation effects are observed which lead to monolayer surface coverages of 2-3 ng/mm² corresponding to edge-on or/and end-on orientations. These monolayer thickness values ranged between 3 and 4.5 nm with a protein density value of 0.60 g/mL and with 50 wt% solvent mass. Further increase of coverage results formation of a multilayer structure. Using the hydration content and other physical layer properties a tentative model lysozyme adsorption is proposed.

A comprehensive study of lysozyme adsorption using dual polarization interferometry and quartz crystal microbalance with dissipation

Protein adsorption plays a crucial role in biomaterial surface science as it is directly linked to the biocompatibility of artificial biomaterial devices. Here, elucidation of protein adsorption mechanism is effected using dual polarization interferometry and a quartz crystal microbalance to characterize lysozyme layer properties on a silica surface at different coverage values. Lysozyme is observed to adsorb from sparse monolayer to multilayer coverage. At low coverage an irreversibly adsorbed layer is formed with slight deformation consistent with side-on orientation. At higher coverage values dynamic re-orientation effects are observed which lead to monolayer surface coverages of 2-3 ng/mm2 corresponding to edge-on or/and end-on orientations. These monolayer thickness values ranged between 3 and 4.5 nm with a protein density value of 0.60 g/mL and with 50 wt% solvent mass. Further increase of coverage results formation of a multilayer structure. Using the hydration content and other physical layer properties a tentative model lysozyme adsorption is proposed. © 2012 Elsevier Ltd.

Simultaneous reduction of particulate matter and NOx emissions using 4-way catalyzed filtration systems

The next generation of diesel emission control devices includes 4-way catalyzed filtration systems (4WCFS) consisting of both NOx and diesel particulate matter (DPM) control. A methodology was developed to simultaneously evaluate the NOx and DPM control performance of miniature 4WCFS made from acicular mullite, an advanced ceramic material (ACM), that were challenged with diesel exhaust. The impact of catalyst loading and substrate porosity on catalytic performance of the NOx trap was evaluated. Simultaneously with NOx measurements, the real-time solid particle filtration performance of catalyst-coated standard and high porosity filters was determined for steady-state and regenerative conditions. The use of high porosity ACM 4-way catalyzed filtration systems reduced NOx by 99% and solid and total particulate matter by 95% when averaged over 10 regeneration cycles. A "regeneration cycle" refers to an oxidizing ("lean") exhaust condition followed by a reducing ("rich") exhaust condition resulting in NOx storage and NOx reduction (i.e., trap "regeneration"), respectively. Standard porosity ACM 4-way catalyzed filtration systems reduced NOx by 60-75% and exhibited 99.9% filtration efficiency. The rich/lean cycling used to regenerate the filter had almost no impact on solid particle filtration efficiency but impacted NOx control. Cycling resulted in the formation of very low concentrations of semivolatile nucleation mode particles for some 4WCFS formulations. Overall, 4WCFS show promise for significantly reducing diesel emissions into the atmosphere in a single control device. © 2013 American Chemical Society.

Analysis of high pressure premixed flames using Equivalent Reactor Networks for predicting NOx emissions

This paper describes a computational study of lean premixed high pressure methane-air flames, using Computational Fluid Dynamics (CFD) together with a reactor network approach. A detailed chemical reaction mechanism is employed to predict pollutant concentrations, placing emphasis on nitrogen oxide emissions. The reacting flow field is divided into separate zones in which homogeneity of the physical and chemical conditions prevails. The defined zones are interconnected forming an Equivalent Reactor Network (ERN). Three flames are examined for which experimental data is available. Flame A is characterised by an equivalence ratio of 0.43 while Flames B and C are richer with equivalence ratios of 0.5 and 0.56 respectively. Computations are performed for a range of operating conditions, quantifying the effect in the emitted NOx levels. Model predictions are compared against the available experimental data. Sensitivity analysis is performed to investigate the effect of the network size, in order to define the optimum number of reactors for accurate predictions of the species mass fractions. © 2012 Elsevier Ltd. All rights reserved.

Studies on the adsorption equilibrium and kinetics of pentachlorophenol on suspended particulate matter of Donghu Lake water

In this paper, the adsorption equilibrium and kinetic behaviors of pentachlorophenol (PCP) on suspended particulate matter (SPM) in Donghu Lake water were investigated. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and their constants were evaluated. The results indicated that the adsorption of PCP on Donghu Lake SPM followed the Freundlich isotherm. Furthermore, the first order Lagergren rate equation and the pseudo-second order rate equation were used to describe the kinetic behaviors of PCP adsorption on Donghu Lake SPM, the rate constants were determined, and the kinetic process of the adsorption of PCP on Donghu Lake SPM followed the second order kinetic model.

Hydrodynamics in an expanded bed of large size ion-exchange resin, and natural product adsorption

Successful applications of expanded bed adsorption (EBA) technology have been widely reported in the literature for protein purification. Little has been reported on the recovery of natural products and active components of Chinese herbal preparations using EBA technology. In this study, the hydrodynamic behavior in an expanded bed of cation resin, 001 x 7 Styrene-DVB, was investigated. Ephedrine hydrochloride (EH) was used as a model natural product to test the dynamic binding capacity (DBC) in the expanded bed. EBA of EH directly from a feedstock containing powdered herbs has also been investigated. These particles are different from commercially available expanded bed adsorbents by virtue of their large size (20S to 1030 gm). When the adsorbent bed is expanded to approximately 1.3 to 1.5 times its settled bed height, the axial liquid-phase dispersion coefficient was found to be of the order 10(-5) m(2) s(-1), which falls into the range 1.0 x 10(-6) to 1.0 X 10(-5) m(2) s(-1) observed previously in protein purification. Because of the favorable column efficiency (low axial dispersion coefficient), the recovery yield and purification factor values of EH directly from a feedstock reached 86.5% and 18, respectively. The results suggest that EBA technology holds promise for the recovery of natural products and active components of Chinese herbal preparations.