Roughness and morphology of composites: influence of type of material, fluoride solution, and time

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of immersion media and repolishing on color stability and superficial morphology of nanofilled composite resin

This study evaluated the influence of fluoride mouth rinses and repolishing on the superficial morphology and color stability of nanofilled resin. About 150 specimens were prepared and polished using aluminum oxide discs for 15 s with a pressure of 2 kg. The experimental groups were divided according to the immersion medium (artificial saliva, 0.5% sodium fluoride, Fluordent Reach, Oral B, Fluorgard) and repolishing procedure (without and with). The specimens were continuously immersed for 1 week. Thereafter, half of each sample was repolished. A color reading was performed after 24 h of immersion in the artificial saliva baseline, after continuous immersion, and after repolishing. The superficial morphology was examined using scanning electron microscopy (SEM) in a qualitative way. Color change (∆E) data were submitted to a mixed analysis of variance using a Shapiro-Wilk test (p>0.05 for the different immersion media) and Sidak's test (p<0.05 for the differences between groups). In the interaction between the repolishing and the immersion media, Fluorgard showed a statistical difference between the ∆E values with and without repolishing (p<0.0001). On the SEM observations, both Fluordent Reach and Fluorgard caused degradation of the superficial resinous matrix of the composite after continuous immersion. This matrix was removed after repolishing.

Cytogenetics Analysis and Testis Morphology of Aquatic Species of the Families Belostomatidae, Gelastocoridae, Gerridae, Notonectidae, and Veliidae (Heteroptera)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of microbiological quality of drinking water in the intestinal morphology of broilers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Developmental Morphology of a Dimorphic Grass Inflorescence: The Brazilian Bamboo Eremitis (Poaceae)

Premise of research.The highly specialized grass inflorescence varies with respect to phyllotaxis, with the reproductive meristem forming primary lateral branches that are either spirally arranged or distichous. The Brazilian bamboo Eremitis is highly unusual in that it has a dimorphic inflorescence, typically composed of an apical gynecandrous whorl of both male and female spikelets and basal whorls of male spikelets. Although not closely related to them, Eremitis shares some structural similarities with some early-divergent grasses.Methodology.We use SEM and LM to describe the development of the reproductive structures of Eremitis to clarify our understanding of the highly specialized grass inflorescence and flower.Pivotal results.Developmental studies show that the inflorescence of Eremitis is actually partially whorled and partially distichous. The apical whorl is abortive. The female spikelet is not terminal on the axis, in contrast with the majority of grasses. All the male spikelets are distichously attached to the inflorescence axis and separated into groups. There is a hollow style with two vascular bundles.Conclusions.The strong morphological similarities between Eremitis and some early-divergent grasses are here supplemented by several anatomical similarities, perhaps due to a shared pollination syndrome.

Morphology of ileal and jejunal pouches used as rectal substitutes

PURPOSE: Our aim was to determine whether the mucosa of a canine jejunal pouch used as a rectal substitute after proctocolectomy retains its morphologic features better than the mucosa of a canine ileal pouch so used. METHODS: Among ten dogs that underwent proctocolectomy, five had a jejunal pouch-distal rectal anastomosis and five an ileal pouch-distal rectal anastomosis. After six months, the animals were killed, the intestinal pouches and portions of unaltered distal ileum were removed, and a blinded, mucosal morphometric analysis was performed. RESULTS: The mucosa of the jejunal pouches had an overall thickness (mean ± standard deviation, anterior and posterior walls, 1,300 ± 140 μm), villous height (286 ± 46 μm), and crypt depth (790 ± 77 μm) greater than that of the ileal pouches (920 ± 170, 208 ± 47, and 530 ± 130 μm, respectively; P < 0.05). Moreover, the mucosal thickness of the jejunal pouches was similar to that of the distal ileum proximal to the pouch (1,200 ± 200 μm; P > 0.05), whereas the mucosal thickness of the ileal pouch was thinner (P < 0.05). CONCLUSIONS: The jejunal mucosa retains its major morphometric features when the jejunum is used as a rectal substitute after proctocolectomy. In contrast, the ileal mucosa atrophies when the ileum is so used.

Morphology of the first larval stage of Macrobrachium brasiliense (Heller, 1868) (Caridea: Palaemonidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of lineage of oocyte donor on the yield and morphology of oocytes recovered by ultrasound-guided follicular aspiration in nellore cows

The objective of this study was to investigate the influence of lineage of oocytes donors on the number and quality of oocytes obtained through ultrasound-guided follicular aspiration in Nellore breed cows derived from two lineages of bulls (Karvadi; K and Taj-Mahal; T). Both maternal (Km and Tm) and paternal (Kp and Tp) lineages, as well as their combinations were investigated. Oocyte aspirations were repeatedly performed with an aspiration interval of 15 days in 56 donor females. Recovered cumulus oocyte-complexes (COCs) were counted, morphologically examined and classified into seven categories (grades from I to VII) according to the number of layers of the cumulus oocyte and cytoplasm appearance. The mean number of oocytes retrieved from donors of lineage Tp-Tm was significantly higher (28.23±1.92, P<0.05) than those obtained from lineages Kp-Tm, Kp-Km, and Tp-Km (21.34±1.32, 21.28±1.73, and 16.72±1.31, respectively). There was no significant difference in the mean number of recovered oocytes between donors of lineages Kp-Km and Kp-Tm, whereas animals of lineage Tp-Km yielded the lowest number of oocytes. Higher mean number of grade III oocytes was recovered from donors of lineage Kp than lineage Tp (10.11±0.66 versus 8.79±0.58, respectively), with more grade III oocytes being obtained in both lineages as compared to the others. Paternal lineage did not influence the quality of recovered oocytes in any other category, but both Kp and Tp yielded a great mean number of oocytes graded as I, II, and III (3.14±0.21; 4.93±0.33, and 10.11±0.66 versus 3.19±0.21, 5.59±0.44, and 8.79±0.58, respectively) than those classified as IV, V, VI, and VII. However, when considering the data from the maternal lineage significantly more oocytes (P<0.05) of grade I, II and III were obtained from Taj-Mahal (11.67 ± 0.67, 5.9±0.42 and 3.64±0.25, respectively) than for lineage Karvadi, with similar results for oocytes of grades IV, V, VI, and VII. Similarly to the paternal lineage, the number of oocytes of grade III was superior (P<0.05) when compared to other categories for both lineages. In conclusion, we demonstrate here a direct influence of lineage of oocyte donor on the production and quality of oocytes obtained through ultrasound-guided follicular aspiration in Nellore cows.

Relationship between the morphology of the maxillary central incisor and horizontal and vertical measurements of the face

Purpose: In order to assist in the selection of artificial teeth for complete dentures, this study aimed to assess the relationship between horizontal and vertical measurements of the face and the morphology of the maxillary central incisor. Materials and Methods: This was a study of 50 plaster casts and 100 teleradiographs - 50 in lateral norm and 50 in frontal norm, belonging to 50 individuals, Caucasian, with a naturally optimal occlusion, matching at least four of the six keys of Andrews. Images of the upper central incisors were obtained by scanning the plaster casts (three-dimensional) and subjectively classified by three examiners as oval, triangular or quadrangular. Facial measures (vertical and horizontal) were defined by means of teleradiographs. In order to check inter-examiner agreement on the classification of central incisor, the Kappa test was used. To verify whether data had normal distribution, the Kolmogorov-Smirnov test was used ( P > 0.2) was used. One-way analysis of variance was employed to assess the association between variables (P > 0.05). Results: When vertical measurements were compared with the three incisor shapes, there was no statistically significant difference (P > 0.05): Triangular (0.54), oval (0.63) and quadrangular (0.51). Similarly, no difference (P > 0.05) was found for facial width (139.08, 143.37, 141.65), maxillary width (76.68, 78.99, 76.91) and mandibular width (103.47, 105.50, 103.11). Conclusions: The majority of cases showed that horizontal and vertical measurements of the face cannot be used as a reference for determining the morphology of the maxillary central incisor crown. It is relevant to analyze and compare other morphological structures to improve the oral health-related quality of life for the conventional denture wearer.

Al-doping effect on the surface morphology of zno films grown by reactive rf magnetron sputtering

Zinc oxide (ZnO) and aluminum-doped zinc oxide (ZnO:Al) thin films were deposited onto glass and silicon substrates by RF magnetron sputtering using a zinc-aluminum target. Both films were deposited at a growth rate of 12.5 nm/min to a thickness of around 750 nm. In the visible region, the films exhibit optical transmittances which are greater than 80%. The optical energy gap of ZnO films increased from 3.28 eV to 3.36 eV upon doping with Al. This increase is related to the increase in carrier density from 5.9 × 1018 cm−3 to 2.6 × 1019 cm−3 . The RMS surface roughness of ZnO films grown on glass increased from 14 to 28 nm even with only 0.9% at Al content. XRD analysis revealed that the ZnO films are polycrystalline with preferential growth parallel to the (002) plane, which corresponds to the wurtzite structure of ZnO.

Morphology of the Gas Bladder in Sea Catfishes (Siluriformes: Ariidae)

The morphology of the gas bladder and associated structures in sea catfishes (Siluriformes: Ariidae) is studied. The most simple gas bladder, exclusive to Galeichthys Valenciennes, is apple-shaped with weakly developed internal trabeculae, has smooth walls externally and a short Mullerian window associated with a broad, short Mullerian ramus that is firmly attached to Baudelot`s ligament and supracleithrum. Most genera of Ariidae have a cordiform bladder with well-developed trabeculae, smooth walls externally, an elongate Mullerian window and an elongate Mullerian ramus with an acute tip that is free from the Baudelot`s ligament and supracleithrum. Sciades proops (Valenciennes) and S. parkeri (Traill) have a similar gas bladder but with a well-developed secondary chamber. Other genera of Ariidae also have a cordiform bladder with well-developed trabeculae and elongate Mullerian window, but with lateral diverticula present as shallow rounded bulges or blister-like swellings along the peripheral margins of the bladder. The degree of development of lateral diverticula varies among and within species, with Osteogeneiosus Bleeker having the most highly-developed diverticula. Bagre pinnimaculatus (Steindachner) and Bagre bagre (Linnaeus) have unusual depressed gas bladders with complex network of internal trabeculae. The implications of gas bladder morphology for the taxonomy and phylogenetic relationships of the family are discussed.

Morphology of the gas bladder in thorny catfishes (Siluriformes: Doradidae)

The gross morphology of the gas bladder is described, illustrated, compared and categorized among 86 of 88 nominal valid and six undescribed species representing all 31 genera of Doradidae with comments on ontogenetic and taxonomic variation when observed. The putatively basal-most doradids exhibit an unmodified cordiform gas bladder. Derived taxa exhibit an impressive suite of modifications including the addition of a secondary bladder, pronounced reduction of the posterolateral chambers, internal trabeculae, associations with bony capsule-like expansions of the anterior (Weberian) vertebrae, and accessory diverticula varying widely in size, shape, abundance, and distribution. Intra-specific differences are minor, most often reflective of ontogenetic changes especially in large-size species, whereas inter-specific and inter-generic differences are significant, in many cases diagnostic, and suggestive of phylogenetic signal excepting instances of evident convergence such as gas bladder reduction in Rhynchodoras and all but one species of Leptodoras.

Morphology of the Gas Bladder in Bumblebee Catfishes (Siluriformes, Pseudopimelodidae)

The gross morphology of the gas bladder is described and compared for representatives of all valid genera of Pseudopimelodidae (Siluriformes). Cephalosilurus albomarginatus and species of Batrochoglanis, and Microglanis have the most basic form: a large, cordiform gas bladder with a simple internal T-shaped septum. Cephalosilurus apurensis, C. fowleri, and C. nigricauda also have a large, cordiform gas bladder, but they have well-developed trabeculae associated with the internal T-shaped septum, and a pair of well-developed constrictor muscles inserted on the external wall; the latter feature is present in most species of Pimelodidae, but absent in all other catfishes. The monotypic Lophiosilurus alexandri also has well-developed constrictor muscles, and its gas bladder is moderately sized. The species of Pseudopimelodus and Cruciglanis have a diminutive gas bladder partially divided into two lateral sacs without internal communication, and lack constrictor muscles. The parapophysis of the fourth vertebra is a wide and long shelf connected to the dorsal surface of the gas bladder in most pseudopimelodid genera. However, in the species of Pseudopimelodus and Cruciglanis the parapophysis of the fourth vertebra is shorter and has its anterior ramus folded back, partially covering the gas bladder anteroventrally; and the tympanic opening is smaller than in species of the other genera. Five phylogenetic characters are proposed based on the morphology of the gas bladder and associated structures in species of Pseudopimelodidae, and the evolution of those characters in the family is discussed. J. Morphol. 272:890-896, 2011. (C) 2011 Wiley-Liss, Inc.

Comparative morphology of the gas bladder in driftwood catfishes (Siluriformes: Auchenipteridae)

The gross morphology of the gas bladder is described and illustrated for representatives of most species and all valid genera of the Auchenipteridae (Siluriformes). Although, a simple cordiform gas bladder is present in some species of the family, others are characterized by their distinctive gas-bladder shape and diverticula disposition. An acute posterior end of the gas bladder characterizes Centromochlus heckelii and C. macracanthus, and is variably present in specimens of Auchenipterus. Tocantinsia piresi and Asterophysus batrachus have distinctive gas bladders differing in number of diverticula (two or many). The two species of Trachycorystes are diagnosed based on their gas bladder morphology: T. menezesi has a simple cordiform bladder, whereas T. trachycorystes has a pair of lateral diverticulum and, usually, a well-developed terminal diverticulum. Species of Auchenipterichthys are characterized by having a secondary bladder with simple chamber. Short or elongate and divergent terminal diverticula are exclusive to most cis-andine species of Trachelyopterus. Tetranematichthys and trans-andine species of Trachelyopterus share a well-developed secondary chamber or terminal diverticula ventrally or dorsally connected to the posterior chambers. The small-sized species of Ageneiosus have well-developed gas bladders with a pair of posterior diverticula, whereas large-sized species have a reduced gas bladder with tunica externa varying from non-, partially, or completely ossified. Eight phylogenetic characters are proposed based on the morphology of the gas bladder and associated structures in species of Auchenipteridae, and the evolution of those characters in the family discussed. J. Morphol., 2012. (C) 2012 Wiley Periodicals, Inc.

Compared morphology of the immatures of males of two urban ant species of Camponotus

The immatures of males of two species of Camponotus ants (Hymenoptera: Formicidae) are described and compared by light and electron microscopy. The numbers of larval instars were determined: Camponotus rufipes Fabricius (Hymenoptera: Formicidae) have four instars; and Camponotus vittatus Forel have three. Male larvae of the two species are similar to previously described Camponotus larvae, sharing the following traits: basic shape of body and mandible, presence of 'chiloscleres', 'praesaepium' (some specimens), labial pseudopalps, and ten pairs of spiracles. However, larvae of the two species can be separated by bodily dimensions and based on their hair number and types. Worker larvae of C. vittatus previously described are extensively similar to male larvae, with only a few inconspicuous differences that may result from intraspecific variation or sexual differences.