Retención de membranas fetales: incidencia, causas, complicaciones y tratamiento. Reporte de caso: Establo Ornelas, México

Bogotá (Colombia): Universidad de La Salle. Facultad de Ciencias Agropecuarias. Programa de Medicina Veterinaria

Estudo da labilidade de Cu(II), Cd(II), Mn(II) e Ni(II) em substâncias húmicas aquáticas utilizando-se membranas celulósicas organomodificadas

In this work commercial filters papers were organomodified with tetraethylorthosilicate (TEOS) and 3-aminopropyltriethoxysilane (3-APTS), aiming at the development of a new analytical procedure for in-situ speciation of labile and inert metal species in aquatic systems. Parameters that exert influence on the metal lability such as pH, chelating time, concentration and characteristics of the organic matter were studied in the laboratory using tests for metal recuperation. The results showed slower kinetics for Cu ion than for Ni, Mn and Cd in the absence of aquatic humic substances (AHS). The relative lability observed for complexed metals in aquatic humic substances using organomodified filter papers was Cu>>Cd>Ni>Mn. The pH values, structural characteristics and concentration of AHS exert strong influence on the lability of the metals. The results obtained showed that the utilization of organomodified filter papers can be an interesting and promising alternative for in situ characterization of metal lability in aquatic systems.

Estudo da permeação em membranas quitosana

This study proposes to do a study on the mathematical modeling of permeation of films based on chitosan. To conduct the study were obtained membranes with various compositions: a virtually pure membrane-based chitosan; one of chitosan associated with poly (ethylene oxide (PEO). The membranes of pure chitosan were treated with plasma in atmospheres of oxygen, argon and methane. The various types of films were characterized as to its permeation regarding sufamerazina sodium. In the process of mathematical modeling were compared the standard method of obtaining the coefficient of permeation recital straight down the slope of the plot obtained by extinction / time with a the integration process of numerical permeability rate will be calculated from the spectroscopy UV

Modificação de membranas de quitosana por plasma para uso biológico

Chitosan membranes have been modified by plasma, utilizing the following gases: nitrogen (N2), methane (CH4), argon (Ar), oxygen (O2) and hydrogen. The modified membranes by plasma were compared to the unmodified ones. The membranes were characterized by absorption assay, contact angle, atomic force microscopy (AFM). Also, permeability assay of sodium sulfamerazine from such membranes were carried out. Through the absorption assay and contact angle it was possible to obtain information of the wettability of the membranes and what changes the plasma treatment can promote in relation to it. The plasma treatment using oxygen promoted increase of the wetability and swelling while the samples treated with methane decrease of the wetability and swelling. Through the Optical Emission Spectroscopy (OES) it was possible to identify which species were present in the plasma during the treatment. And through the AFM analysis it was possible to observe the changes nanotopography occurred on the surface of the samples. Permeability assay were archived for all treated membranes and compared to no treated ones. Due to that assay it was possible verify which the plasma treatment increased the permeability spectrum of the membranes which has varied from 1,4548 *10-5cm2.min-1 to 2,7713*10-5cm2.min-1. Chitosan membranes with permeability varied are importance in systems drug delivery, to liberate a wide variety of drugs

Estudos de vias sintéticas catalíticas para benzociclo-alcanois e análogos: potenciais fármacos para doença de Alzhjeimer

A doença de Alzheimer constitui uma ameaça significativa a nível mundial. Estima-se que, mundialmente existam cerca de 35 milhões de pessoas afetadas por este tipo de demência. Os compostos contendo um esqueleto benzocicloalcanol (que incluem benzofuranos e di-hidrobenzofuranóis) mostram atividades biológicas significativas e possuem muito potencial no tratamento das doenças neurodegenerativas. Nos últimos anos têm havido avanços significativos no campo das reações catalisadas por metais. As reações de adição nucleófila intramolecular e a de Heck intramolecular constituem metodologias importantes para a síntese de benzocicloalcanóis. No âmbito deste trabalho, pretendia-se sintetizar uma biblioteca de compostos contendo um esqueleto benzocicloalcanol. A estratégia adotada para a síntese de dihidrobenzofuranóis envolveu um método de ciclização catalítica de cetonas aril-éteres e para a síntese de benzofuranos, um método de ciclização catalítico de enoatos e enamidas (amidas de Weinreb). Várias condições foram estudadas; Abstract: Studies on Synthetic Catalytic Pathways to Benzocycloalkanols and Derivatives – Potential Drugs for Alzheimer’s Disease Alzheimer's disease constitutes a significant threat worldwide. It is estimated that are about 35 million people worldwide suffering from this type of dementia. The compounds containing a benzocycloalkanol scaffold (including benzofurans and dihydrobenzofurans) show significant biological activity and have great potential in the treatment of neurodegenerative diseases. In recent years there have been many advances in the field of catalyzed reactions by transition-metals. The intramolecular nucleophilic addition and the intramolecular Heck reactions constitute important methods for the synthesis of benzocycloalkanols. Within this work, the main goal was to synthesize a library of compounds containing a benzocycloalkanol scaffold. The adopted strategy for the synthesis of dihydrobenzofurans was the catalytic cyclization of aryl ether ketones and for the synthesis of benzofurans, the catalytic cyclization of enoates and enamides (Weinreb amides). Several conditions were studied

Desenvolvimento de membranas porosas de alumina para fins de tratamento de efluente industrial têxtil

Textile production has been considered as an activity of high environmental impact due to the generation of large volumes of waste water with high load of organic compounds and strongly colored effluents, toxic and difficult biodegradability. This thesis deals with obtaining porous alumina ceramic membranes for filtration of textile effluent in the removal of contaminants, mainly color and turbidity. Two types of alumina with different particle sizes as a basis for the preparation of formulation for mass production of ceramic samples and membranes. The technological properties of the samples were evaluated after using sintering conditions: 1,350ºC-2H, 1,450ºC-30M, 1,450ºC-2H, 1,475ºC-30M and 1,475ºC-2H. The sintered samples were characterized by XRD, XRF, AG, TG, DSC, DL, AA, MEA, RL, MRF-3P, SEM and Intrusion Porosimetry by Mercury. After the characterization, a standard membrane was selected with their respective sintering condition for the filterability tests. The effluent was provided by a local Textile Industry and characterized at the entry and exit of the treatment plant. A statistical analysis was used to study the effluent using the following parameters: pH, temperature, EC, SS, SD, oil and grease, turbidity, COD, DO, total phosphorus, chlorides, phenols, metals and fecal coliform. The filtered effluent was evaluated by using the same parameters. These results demonstrate that the feasibility of the use of porous alumina ceramic membranes for removing contaminants from textile effluent with improved average pore size of 0.4 micrometre (distribution range varying from 0,025 to 2.0 micrometre), with total porosity of 29.66%, and average percentages of color removal efficiency of 89.02%, 92.49% of SS, turbidity of 94.55%, metals 2.70% (manganese) to 71.52% (iron) according to each metal and COD removal of 72.80%

Efeito do tratamento por plasma na proliferação de fibroblastos e esterilização de membranas de quitosana

Chitosan is being studied for use as dressing due their biological properties. Aiming to expand the use in biomedical applications, chitosan membranes were modified by plasma using the following gases: nitrogen (N2), methane (CH4), argon (Ar), oxygen (O2) and hydrogen (H2). The samples were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle, surface energy and water absorption test. Biological Tests were also performed, such as: test sterilization and proliferation of fibroblasts (3T3 line). Through SEM we observed morphological changes occurring during the plasma treatment, the formation of micro and nano-sized valleys. MFA was used to analyze different roughness parameters (Ra, Rp, Rz) and surface topography. It was found that the treated samples had an increase in surface roughness and sharp peaks. Methane plasma treatment decreased the hydrophilicity of the membranes and also the rate of water absorption, while the other treatments turned the membranes hydrophilic. The sterilization was effective in all treatment times with the following gases: Ar, N2 and H2. With respect to proliferation, all treatments showed an improvement in cell proliferation increased in a range 150% to 250% compared to untreated membrane. The highlights were the treatments with Ar 60 min, O2 60 min, CH4 15 min. Observing the results of the analyzes performed in this study, it appears that there is no single parameter that influences cell proliferation, but rather a set of ideal conditions that favor cell proliferation

Infección neonatal en hijos de madres con rotura prematura de membranas. Hospital Vicente Corral Moscoso Cuenca 1997

El presente trabajo tuvo por objeto investigar infección neonatal en hijos de madres que presentan rotura prematura de membranas [RPM] de más de 12 horas, mediante el cultivo de endocervix, y establecer validez de los cultivos de conducto auditivo externo y el recuento de polimorfonucleares como factores predictivos de infección neonatal. Se estudiaron 54 casos de madres que presentaron RPM de más de 12 horas, con las que se establecieron 2 grupos de estudio: Un primer grupo con RPM de 12 a 24 horas que constituyó el 66.7 por ciento, y el segundo con más de 24 horas el 33.3 por ciento. De las 54 pacientes, las 21 [38.9 por ciento] presentaron cultivo positivo de endocervix. De las 36 pacientes que presentaron RPM de 12 a 24 horas 7 [19.4 por ciento] fueron positivos; en el grupo de 18 pacientes que tuvieron RPM de más de 24 horas 14 [77.8 por ciento] de ellos resultaron positivos, lo que nos demuestra que mientas más horas de rotura prematura de membranas en la madre, mayor riesgo de infección existente en el recién nacido. Los gérmenes más frecuentes encontrados en el cultivo de endocervix fueron el Estreptococo, el E. Coli y el estafilococo

Pastas compósitas cimento/sílica/polímero para cimentação de poços de baixa profundidade sujeitas à injeção de vapor

The production of heavy oil fields, typical in the Northeastern region, is commonly stimulated by steam injection. High bottom hole temperatures are responsible not only for the development of deleterious stresses of the cement sheath but also for cement strength retrogression. To overcome this unfavorable scenario, polymeric admixtures can be added to cement slurries to improve its fracture energy and silica flour to prevent strength retrogression. Therefore, the objective of the present study was to investigate the effect of the addition of different concentrations of polyurethane (5-25%) to cement slurries containing 40% BWOC silica flour. The resulting slurries were characterized using standard API (American Petroleum Institute) laboratory tests. In addition to them, the mechanical properties of the slurries, including elastic modulus and microhardness were also evaluated. The results revealed that density, free water and stability of the composite cement/silica/polyurethane slurries were within acceptable limits. The rheological behavior of the slurries, including plastic viscosity, yield strength and gel strength increased with the addition of 10% BWOC polyurethane. The presence of polyurethane reduced the fluid loss of the slurries as well as their elastic modulus. Composite slurries also depicted longer setting times due to the presence of the polymer. As expected, both the mechanical strength and microhardness of the slurries decreased with the addition of polyurethane. However, at high bottom hole temperatures, the strength of the slurries containing silica and polyurethane was far superior than that of plain cement slurries. In summary, the use of polyurethane combined with silica is an interesting solution to better adequate the mechanical behavior of cement slurries to heavy oil fields subjected to steam injection

Estudo do comportamento de pastas compósitas cimento/sílica/poliuretana para poços de petróleo HPHT

Os poços HPHT atravessam zonas anormalmente pressurizadas e com altos gradientes de temperatura. Esses poços apresentam elevadas concentrações de tensões produzidas pelas operações de perfuração e fraturamento hidráulico, flutuações da pressão e temperatura, forças dinâmicas geradas durante a perfuração, formações inconsolidadas, entre outros aspectos, podendo resultar em falhas mecânicas na bainha de cimento. Tais falhas comprometem a estabilidade mecânica do poço e o isolamento das zonas produtoras de óleos e/ou gás. Para que operações corretivas não se façam necessárias, é preciso adequar as pastas às condições de cada poço. Sistemas de pastas de cimento para poços HPHT requerem um bom controle de suas propriedades termo-mecânicas. Visto que a temperaturas superiores a 110 oC (230 oF) o cimento, após alcançar um valor máximo de resistência, inicia um processo de perda de resistência (retrogressão). Para prevenir esse efeito substitui-se parcialmente o cimento Portland por sílica com objetivo de incrementar a reação pozolânica. Esta reação modifica a trajetória do processo natural de hidratação do cimento, o gel de silicato de cálcio hidratado (C-S-H) se converte em várias outras fases com maior resistência. Polímeros também são adicionados para proporcionar maior flexibilidade e agir como barreira à propagação de trincas desenvolvidas sob tensão. O presente trabalho teve como objetivo estudar o comportamento do sistema cimento/sílica/polímero quando submetido às condições de alta temperatura e alta pressão. Foram formuladas pastas de cimento puro, pastas contendo 40 % BWOC de sílica flour e pastas com diferentes concentrações de poliuretana (5 % a 25 %) e 40 % BWOC de sílica flour. O peso específico das pastas foi fixado em 1,87 g/cm3 (15,6 lb/gal). Os resultados demonstram que as resistências da pasta contendo 40% de sílica e das com adição de polímero foram muito superiores a da pasta de cimento puro, não ocorrendo o efeito da retrogressão. As pastas com polímero apresentaram um crescente aumento da tenacidade com o aumento da concentração da mesma, sendo assim capaz de suportar as tensões. Além de se manterem estáveis termicamente acima de 180 ºC. O sistema também apresentou excelentes resultados de filtrado, reologia, água livre, estabilidade e permeabilidade. Sendo assim, o mesmo mostrou ser aplicável a poços HPHT

Prevalencia de la ruptura prematura de membranas y la vía de finalización del parto en el Hospital Vicente Corral Moscoso, período 2014

Antecedente. La ruptura prematura de membranas (RPM) es causa importante de morbimortalidad materno fetal por asociarse a complicaciones riesgosas como la corioamnionitis. Objetivo. Establecer la prevalencia de ruptura prematura de membranas y la vía de terminación del parto según la variante de ruptura. Material y métodos. Con un diseño transversal se recopiló información de 360 historias clínicas de maternas atendidas en el Servicio de Obstetricia y Ginecología del hospital Vicente Corral Moscoso de Cuenca, durante el 2014. Resultados. La prevalencia de RPM fue del 8.2% (7.4 – 9.05). La edad promedio fue de 24.0 ± 6.2 años entre un rango de 14 a 44. El 46% cursó la secundaria, el 69% se dedica a actividades domésticas y el 61% reside en zona urbana. La rotura de membranas a término ocurrió en el 66%, la rotura prolongada en el 20% y la rotura pre-término en el 12%. El 71% terminó su parto vía vaginal y el 28% mediante cesárea. El parto vaginal fue más frecuente en rotura de membranas a término (P = 0.0005) y la cesárea en rotura pre-término (P = 0.002). En rotura prolongada, la frecuencia fue similar. Conclusión. La prevalencia de rotura prematura de membranas y la vía de terminación del parto, están dentro de las cifras reportadas por la literatura en estudios similares nacionales y extranjeros. Las variantes de RPM no parecen influenciar sobre la terminación del parto

Aspectos ultra-estruturais dos canais secretores em órgãos vegetativos e reprodutivos de Anacardiaceae

The study assessed phloem canal development and ultra-structure in shoot apices of Spondias dulcis G. Forst., phloematic canal ultra-structure in shoot apices of Tapirira guianensis Aubl., and floral canal ultra-structure and development and fruit canal ultra-structure of the latter specie. The flower and fruit canals of Anacardium humile St.Hil. were also studied ultra-structurally. The canals in shoot apices of S. dulcis show schizo-lysigenous formation and the floral canals of T. guianensis show schizogenous development. Epithelial cells of S. dulcis and T. guianensis canals have rough endoplasmic reticulum, free ribosomes, elongated plastids of several shapes with osmiophilic inclusions and dictyosomes with production of vesicles. Such organelles participate in the secretion of a heterogeneous exudate, which is comprised of hydrophilic and lipophilic substances. The epithelial cells of the fruit of A. humile present elongated plastids with circular membrane system, which are involved in the synthesis of lipophilic substances. The results of the ultra-structural analyses of the epithelial cells corroborate the results previously obtained in a histochemical study. In the histochemical study, lipophilic and hydrophilic substances were identified in the canals of T. guinanensis and S. dulcis and only lipophilic substances were identified in the canals of A. humile. Based on the ultrastructural aspects of the secretory canals of T. guianensis and S. dulcis we concluded that the plastids of the epithelial cells of the two species are different although they produce secretion of similar composition. A new record for the family is the presence of a great number of circular plastids in epithelial cells of the fruit of Anacardium humile. The pattern found in the secretory canals of the studied species is the ecrine type of secretion release.