Tissue Equivalent Phantom Design for Optimization of a Coherent Scatter Imaging System

Scatter in medical imaging is typically cast off as image-related noise that detracts from meaningful diagnosis. It is therefore typically rejected or removed from medical images. However, it has been found that every material, including cancerous tissue, has a unique X-ray coherent scatter signature that can be used to identify the material or tissue. Such scatter-based tissue-identification provides the advantage of locating and identifying particular materials over conventional anatomical imaging through X-ray radiography. A coded aperture X-ray coherent scatter spectral imaging system has been developed in our group to classify different tissue types based on their unique scatter signatures. Previous experiments using our prototype have demonstrated that the depth-resolved coherent scatter spectral imaging system (CACSSI) can discriminate healthy and cancerous tissue present in the path of a non-destructive x-ray beam. A key to the successful optimization of CACSSI as a clinical imaging method is to obtain anatomically accurate phantoms of the human body. This thesis describes the development and fabrication of 3D printed anatomical scatter phantoms of the breast and lung.

The purpose of this work is to accurately model different breast geometries using a tissue equivalent phantom, and to classify these tissues in a coherent x-ray scatter imaging system. Tissue-equivalent anatomical phantoms were designed to assess the capability of the CACSSI system to classify different types of breast tissue (adipose, fibroglandular, malignant). These phantoms were 3D printed based on DICOM data obtained from CT scans of prone breasts. The phantoms were tested through comparison of measured scatter signatures with those of adipose and fibroglandular tissue from literature. Tumors in the phantom were modeled using a variety of biological tissue including actual surgically excised benign and malignant tissue specimens. Lung based phantoms have also been printed for future testing. Our imaging system has been able to define the location and composition of the various materials in the phantom. These phantoms were used to characterize the CACSSI system in terms of beam width and imaging technique. The result of this work showed accurate modeling and characterization of the phantoms through comparison of the tissue-equivalent form factors to those from literature. The physical construction of the phantoms, based on actual patient anatomy, was validated using mammography and computed tomography to visually compare the clinical images to those of actual patient anatomy.

Step-count accuracy of three motion sensors for older and frail medical inpatients

Objectives: To measure the step-count accuracy of an ankle-worn accelerometer, a thigh-worn accelerometer and one pedometer in older and frail inpatients. Design: Cross-sectional design study. Setting: Research room within a hospital. Participants: Convenience sample of inpatients aged ≥65 years, able to walk 20 metres unassisted, with or without a walking-aid. Intervention: Patients completed a 40-minute programme of predetermined tasks while wearing the three motion sensors simultaneously. Video-recording of the procedure provided the criterion measurement of step-count. Main Outcome Measures: Mean percentage (%) errors were calculated for all tasks, slow versus fast walkers, independent versus walking-aid-users, and over shorter versus longer distances. The Intra-class Correlation was calculated and accuracy was visually displayed by Bland-Altman plots. Results: Thirty-two patients (78.1 ±7.8 years) completed the study. Fifteen were female and 17 used walking-aids. Their median speed was 0.46 m/sec (interquartile range, IQR 0.36-0.66). The ankle-worn accelerometer overestimated steps (median 1% error, IQR -3 to 13). The other motion sensors underestimated steps (40% error (IQR -51 to -35) and 38% (IQR -93 to -27), respectively). The ankle-worn accelerometer proved more accurate over longer distances (3% error, IQR 0 to 9), than shorter distances (10%, IQR -23 to 9). Conclusions: The ankle-worn accelerometer gave the most accurate step-count measurement and was most accurate over longer distances. Neither of the other motion sensors had acceptable margins of error.

A study protocol of a randomised controlled trial to measure the effects of an augmented prescribed exercise programme (APEP) for frail older medical patients in the acute setting

Background: Older adults experience functional decline in hospital leading to increased healthcare burden and morbidity. The benefits of augmented exercise in hospital remain uncertain. The aim of this trial is to measure the short and longer-term effects of augmented exercise for older medical in-patients on their physical performance, quality of life and health care utilisation. Design and Methods: Two hundred and twenty older medical patients will be blindly randomly allocated to the intervention or sham groups. Both groups will receive usual care (including routine physiotherapy care) augmented by two daily exercise sessions. The sham group will receive stretching and relaxation exercises while the intervention group will receive tailored strengthening and balance exercises. Differences between groups will be measured at baseline, discharge, and three months. The primary outcome measure will be length of stay. The secondary outcome measures will be healthcare utilisation, activity (accelerometry), physical performance (Short Physical Performance Battery), falls history in hospital and quality of life (EQ-5D-5 L). Discussion: This simple intervention has the potential to transform the outcomes of the older patient in the acute setting.

The impact of a simulated intervention on attitudes of undergraduate nursing and medical students towards end of life care provision

Background: The concerns of undergraduate nursing and medical students’ regarding end of life care are well documented. Many report feelings of emotional distress, anxiety and a lack of preparation to provide care to patients at end of life and their families. Evidence suggests that increased exposure to patients who are dying and their families can improve attitudes toward end of life care. In the absence of such clinical exposure, simulation provides experiential learning with outcomes comparable to that of clinical practice. The aim of this study was therefore to assess the impact of a simulated intervention on the attitudes of undergraduate nursing and medical students towards end of life care.
Methods: A pilot quasi-experimental, pretest-posttest design. Attitudes towards end of life care were measured using the Frommelt Attitudes Towards Care of the Dying Part B Scale which was administered pre and post a simulated clinical scenario. 19 undergraduate nursing and medical students were recruited from one large Higher Education Institution in the United Kingdom.
Results: The results of this pilot study confirm that a simulated end of life care intervention has a positive impact on the attitudes of undergraduate nursing and medical students towards end of life care (p < 0.001).
Conclusions: Active, experiential learning in the form of simulation teaching helps improve attitudes of undergraduate nursing and medical students towards end of life. In the absence of clinical exposure, simulation is a viable alternative to help prepare students for their professional role regarding end of life care.

Reassembled, Slightly Askew:Composition & Sound Design

Reassembled, Slightly Askew is an autobiographical, immersive audio-based artwork based on Shannon Sickels’ experience of falling critically ill with a rare brain infection and her journey of rehabilitation with an acquired brain injury. Audience members experience Reassembled individually, listening to the audio via headphones while lying on a bed. The piece makes use of binaural microphone technology and spatial sound design techniques, causing listeners to feel they are inside Shannon’s head, viscerally experiencing her descent into coma, brain surgeries, early days in the hospital, and re-integration into the world with a hidden disability. It is a new kind of storytelling, never done before about this topic, that places the listener safely in the first-person perspective with the aim of increasing empathy and understanding. Reassembled… was made through a 5-year collaboration with an interdisciplinary team of artists led by Shannon Sickels (writer & performer), Paul Stapleton (composer & sound designer), Anna Newell (director), Hanna Slattne (dramaturgy), Stevie Prickett (choreography), and Shannon’s consultant neurosurgeon and head injury nurse. It’s development and production has been made possible with the support of a Wellcome Trust Arts Award, the Arts Council NI, Sonic Arts Research Centre, Belfast's Metropolitan Arts Centre, and grants from the Arts & Disability Award Ireland scheme. In its 2015 premiere year, Reassembled had 99 shows across Northern Ireland, including at the Cathedral Quarter Arts Festival (the MAC, Belfast) and BOUNCE Arts & Disability Forum Festival (Lyric Theatre, Belfast). It was awarded 5 stars in the Stage, a Hospital Club h100 Theatre & Performance Award, and been shared at medical conferences and trainings across the UK. It continues to be presented in diverse artistic and educational contexts, including as part of A Nation’s Theatre Festival in 2016 at Battersea Arts Centre in London where it was given 4 star reviews in the Guardian, Time Out London and the Evening Standard. "A real-life ordeal, captured by a daring, disorientating artistic collaboration, which works brilliantly on so many levels…It should be available on prescription.” — The Stage ★★★★★ www.reassembled.co.uk Audio clips and documentary footage available here: http://www.paulstapleton.net/portfolio/reassembled-slightly-askew

Designing Out Medical Error, WCDH Boston 2011

This talk is about using research and design to reduce medical errors. It doesn’t matter whether you deliver healthcare in the old-fashioned pathogenic way, or salutogenically, it all falls apart if systems and protocols let the patient down, and harm them.

“Medical bag for General Practice” Just in Case: redesigning the doctor’s bag (2012)

This research addressed practice related problems from a medico-legal perspective and aims to provide a working tool that aids GPs to comply with best practice protocols. The resulting bag was developed in collaboration with General Practitioners, clinicians and members of the Medical Defense Union. Using proven methods developed within the Healthcare & Patient Safety Lab (e.g. DOME, Ambulance) to establish an evidence-based brief, this research used task, equipment and consumables analysis to determine minimum requirements and preferred layouts for task optimisation. The research established that clinicians require three distinct functions in their workspace: laying out, organisation and information retrieval. Feedback from clinicians indicates that this working tool allows them to access information and equipment wherever they may be and suggests an improvement from current practice. The research is now into a second year where the design of the bag will be refined and tested. Lifestyle and demographic changes such as the ageing population and increased prevalence of chronic diseases require more consistent standards of primary care, and care that is well coordinated and integrated (Imison, et al., 2011). Many guidelines exist relating to general practice and the doctor’s bag (NSLMC, 2008, RACGP, 2010, RCGP, 2008 and Hiramanek, 2004), however there is no standard in the UK that regulates the shape and materials of the bag or its contents. Doctors may use any sort of vessel to transport their equipment and consumables to a patient’s location. Furthermore, treating a patient in their own home, outside an ideal clinical environment, presents its own complications. A looks-like, works-like bag prototype and information system that will be used in clinical trials, the results of which will determine the manufacturing of a new, standardised bag for clinical treatment used by members of the Medical Defence Union.

Medical Device Development: the challenge for ergonomics

High quality, well designed medical devices are necessary to provide safe and effective clinical care for patients as well as to ensure the health and safety of professional and lay device users. Capturing the user requirements of users and incorporating these into design is an essential component of this. The field of ergonomics has an opportunity to assist, not only with this area, but also to encourage a more general consideration of the user during medical device development. A review of the literature on methods for assessing user requirements in engineering and ergonomics found that little published work exists on the ergonomics aspects of medical device development. In particular there is little advice available to developers on which issues to consider during design and development or recommendations for good practice in terms of the methods and approaches needed to capture the full range of user requirements. The Multidisciplinary Assessment of Technology Centre for Healthcare (MATCH) is a research collaboration that is working in conjunction with industrial collaborators to apply ergonomics methods to real case study projects with the ultimate aim of producing an industry-focused guide to applying ergonomics principles in medical device development.

Feasibility study to inform the design of a UK multi-centre randomised controlled trial of prophylactic antibiotics for the prevention of recurrent cellulitis of the leg

Background: This paper describes the results of a feasibility study for a randomised controlled trial (RCT). Methods: Twenty-nine members of the UK Dermatology Clinical Trials Network (UK DCTN) expressed an interest in recruiting for this study. Of these, 17 obtained full ethics and Research & Development (R&D) approval, and 15 successfully recruited patients into the study. A total of 70 participants with a diagnosis of cellulitis of the leg were enrolled over a 5-month period. These participants were largely recruited from medical admissions wards, although some were identified from dermatology, orthopaedic, geriatric and general surgery wards. Data were collected on patient demographics, clinical features and willingness to take part in a future RCT. Results: Despite being a relatively common condition, cellulitis patients were difficult to locate through our network of UK DCTN clinicians. This was largely because patients were rarely seen by dermatologists, and admissions were not co-ordinated centrally. In addition, the impact of the proposed exclusion criteria was high; only 26 (37%) of those enrolled in the study fulfilled all of the inclusion criteria for the subsequent RCT, and were willing to be randomised to treatment. Of the 70 participants identified during the study as having cellulitis of the leg (as confirmed by a dermatologist), only 59 (84%) had all 3 of the defining features of: i) erythema, ii) oedema, and iii) warmth with acute pain/tenderness upon examination. Twenty-two (32%) patients experienced a previous episode of cellulitis within the last 3 years. The median time to recurrence (estimated as the time since the most recent previous attack) was 205 days (95% CI 102 to 308). Service users were generally supportive of the trial, although several expressed concerns about taking antibiotics for lengthy periods, and felt that multiple morbidity/old age would limit entry into a 3-year study. Conclusion: This pilot study has been crucial in highlighting some key issues for the conduct of a future RCT. As a result of these findings, changes have been made to i) the planned recruitment strategy, ii) the proposed inclusion criteria and ii) the definition of cellulitis for use in the future trial.

MATCH: a new industry-focused approach to medical device development

MATCH (Multidisciplinary Assessment of Technology Centre for Healthcare) is a new collaboration in the UK that aims to support the healthcare sector by creating methods to assess the value of medical devices from concept through to mature product. A major aim of MATCH is to encourage the inclusion of the user throughout the product lifecycle in order to achieve devices that truly meet the requirements of their users. A review of the published literature indicates that user requirements are mainly collected during the design and evaluation stage of the product lifecycle whilst other areas, including the concept stage, have less user involvement. Complementing the literature review is an in-depth consultation with the medical device industry, which has identified a number of barriers encountered by companies when attempting to capture user requirements. These will be addressed by a number of case study projects, performed in collaboration with our industrial partners, that will examine the application and utility of different approaches to collecting and analysing data on user requirements. MATCH is focused on providing advice to device developers on how to select and apply methods that have maximum theoretical strength, practical application, cost-effectiveness and likelihood of wide sector acceptance. Feedback will be sought in order to ensure that the needs of the diverse medical device sector are met.

Design de equipamento médico

Dissertação de Mestrado para obtenção do grau de Mestre em Design de Produto, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Subject response rates in case-control studies of cancer : time trends, study design determinants, and quality of reporting

Objectifs: Examiner les tendances temporelles, les déterminants en lien avec le design des études et la qualité des taux de réponse rapportés dans des études cas-témoins sur le cancer publiées lors des 30 dernières années. Méthodes: Une revue des études cas-témoins sur le cancer a été menée. Les critères d'inclusion étaient la publication (i) dans l’un de 15 grands périodiques ciblés et (ii) lors de quatre périodes de publication (1984-1986, 1995, 2005 et 2013) couvrant trois décennies. 370 études ont été sélectionnées et examinées. La méthodologie en lien avec le recrutement des sujets et la collecte de données, les caractéristiques de la population, les taux de participation et les raisons de la non-participation ont été extraites de ces études. Des statistiques descriptives ont été utilisées pour résumer la qualité des taux de réponse rapportés (en fonction de la quantité d’information disponible), les tendances temporelles et les déterminants des taux de réponse; des modèles de régression linéaire ont été utilisés pour analyser les tendances temporelles et les déterminants des taux de participation. Résultats: Dans l'ensemble, les qualités des taux de réponse rapportés et des raisons de non-participation étaient très faible, particulièrement chez les témoins. La participation a diminué au cours des 30 dernières années, et cette baisse est plus marquée dans les études menées après 2000. Lorsque l'on compare les taux de réponse dans les études récentes a ceux des études menées au cours de 1971 à 1980, il y a une plus grande baisse chez les témoins sélectionnés en population générale ( -17,04%, IC 95%: -23,17%, -10,91%) que chez les cas (-5,99%, IC 95%: -11,50%, -0,48%). Les déterminants statistiquement significatifs du taux de réponse chez les cas étaient: le type de cancer examiné, la localisation géographique de la population de l'étude, et le mode de collecte des données. Le seul déterminant statistiquement significatif du taux de réponse chez les témoins hospitaliers était leur localisation géographique. Le seul déterminant statistiquement significatif du taux de participation chez les témoins sélectionnés en population générale était le type de répondant (sujet uniquement ou accompagné d’une tierce personne). Conclusion: Le taux de participation dans les études cas-témoins sur le cancer semble avoir diminué au cours des 30 dernières années et cette baisse serait plus marquée dans les études récentes. Afin d'évaluer le niveau réel de non-participation et ses déterminants, ainsi que l'impact de la non-participation sur la validité des études, il est nécessaire que les études publiées utilisent une approche normalisée pour calculer leurs taux de participation et qu’elles rapportent ceux-ci de façon transparente.

DESIGN AND APPLICATION OF WIRELESS PASSIVE MAGNETOELASTIC RESONANCE AND MAGNETOHARMONIC FORCE SENSORS

The objective of the work described in this dissertation is the development of new wireless passive force monitoring platforms for applications in the medical field, specifically monitoring lower limb prosthetics. The developed sensors consist of stress sensitive, magnetically soft amorphous metallic glass materials. The first technology is based on magnetoelastic resonance. Specifically, when exposed to an AC excitation field along with a constant DC bias field, the magnetoelastic material mechanically vibrates, and may reaches resonance if the field frequency matches the mechanical resonant frequency of the material. The presented work illustrates that an applied loading pins portions of the strip, effectively decreasing the strip length, which results in an increase in the frequency of the resonance. The developed technology is deployed in a prototype lower limb prosthetic sleeve for monitoring forces experienced by the distal end of the residuum. This work also reports on the development of a magnetoharmonic force sensor comprised of the same material. According to the Villari effect, an applied loading to the material results in a change in the permeability of the magnetic sensor which is visualized as an increase in the higher-order harmonic fields of the material. Specifically, by applying a constant low frequency AC field and sweeping the applied DC biasing field, the higher-order harmonic components of the magnetic response can be visualized. This sensor technology was also instrumented onto a lower limb prosthetic for proof of deployment; however, the magnetoharmonic sensor illustrated complications with sensor positioning and a necessity to tailor the interface mechanics between the sensing material and the surface being monitored. The novelty of these two technologies is in their wireless passive nature which allows for long term monitoring over the life time of a given device. Additionally, the developed technologies are low cost. Recommendations for future works include improving the system for real-time monitoring, useful for data collection outside of a clinical setting.

Subject response rates in case-control studies of cancer : time trends, study design determinants, and quality of reporting

Objectifs: Examiner les tendances temporelles, les déterminants en lien avec le design des études et la qualité des taux de réponse rapportés dans des études cas-témoins sur le cancer publiées lors des 30 dernières années. Méthodes: Une revue des études cas-témoins sur le cancer a été menée. Les critères d'inclusion étaient la publication (i) dans l’un de 15 grands périodiques ciblés et (ii) lors de quatre périodes de publication (1984-1986, 1995, 2005 et 2013) couvrant trois décennies. 370 études ont été sélectionnées et examinées. La méthodologie en lien avec le recrutement des sujets et la collecte de données, les caractéristiques de la population, les taux de participation et les raisons de la non-participation ont été extraites de ces études. Des statistiques descriptives ont été utilisées pour résumer la qualité des taux de réponse rapportés (en fonction de la quantité d’information disponible), les tendances temporelles et les déterminants des taux de réponse; des modèles de régression linéaire ont été utilisés pour analyser les tendances temporelles et les déterminants des taux de participation. Résultats: Dans l'ensemble, les qualités des taux de réponse rapportés et des raisons de non-participation étaient très faible, particulièrement chez les témoins. La participation a diminué au cours des 30 dernières années, et cette baisse est plus marquée dans les études menées après 2000. Lorsque l'on compare les taux de réponse dans les études récentes a ceux des études menées au cours de 1971 à 1980, il y a une plus grande baisse chez les témoins sélectionnés en population générale ( -17,04%, IC 95%: -23,17%, -10,91%) que chez les cas (-5,99%, IC 95%: -11,50%, -0,48%). Les déterminants statistiquement significatifs du taux de réponse chez les cas étaient: le type de cancer examiné, la localisation géographique de la population de l'étude, et le mode de collecte des données. Le seul déterminant statistiquement significatif du taux de réponse chez les témoins hospitaliers était leur localisation géographique. Le seul déterminant statistiquement significatif du taux de participation chez les témoins sélectionnés en population générale était le type de répondant (sujet uniquement ou accompagné d’une tierce personne). Conclusion: Le taux de participation dans les études cas-témoins sur le cancer semble avoir diminué au cours des 30 dernières années et cette baisse serait plus marquée dans les études récentes. Afin d'évaluer le niveau réel de non-participation et ses déterminants, ainsi que l'impact de la non-participation sur la validité des études, il est nécessaire que les études publiées utilisent une approche normalisée pour calculer leurs taux de participation et qu’elles rapportent ceux-ci de façon transparente.

Relevance of anatomy to medical education and clinical practice: perspectives of medical students, clinicians, and educators

Introduction: Against a backdrop of ever-changing diagnostic and treatment modalities, stakeholder perceptions (medical students, clinicians, anatomy educators) are crucial for the design of an anatomy curriculum which fulfils the criteria required for safe medical practice. This study compared perceptions of students, practising clinicians, and anatomy educators with respect to the relevance of anatomy education to medicine. Methods: A quantitative survey was administered to undergraduate entry (n = 352) and graduate entry students (n = 219) at two Irish medical schools, recently graduated Irish clinicians (n = 146), and anatomy educators based in Irish and British medical schools (n = 30). Areas addressed included the association of anatomy with medical education and clinical practice, mode of instruction, and curriculum duration. Results: Graduate-entry students were less likely to associate anatomy with the development of professionalism, teamwork skills, or improved awareness of ethics in medicine. Clinicians highlighted the challenge of tailoring anatomy education to increase student readiness to function effectively in a clinical role. Anatomy educators indicated dissatisfaction with the time available for anatomy within medical curricula, and were equivocal about whether curriculum content should be responsive to societal feedback. Conclusions: The group differences identified in the current study highlight areas and requirements which medical education curriculum developers should be sensitive to when designing anatomy courses.