DInSAR monitoring of aquifer compaction due to water withdrawal: Vegas Baja and Media of the Segura river (SE, Spain) case study

This study was partially financed by the Spanish Ministry of Education and Science and EU FEDER under project TEC2005-06863, by the Valencia Regional Government under projects GV006/179 and ACOMP07/087, and by the University of Alicante under projects VIGROB2004102, VIGROB-053, and VIGROB-114.

Effects of nitrogen sources on the nitrate assimilation in Haloferax mediterranei: growth kinetics and transcriptomic analysis

The haloarchaeon Haloferax mediterranei is able to grow in a defined culture media not only in the presence of inorganic nitrogen salt but also with amino acid as the sole nitrogen source. Assimilatory nitrate and nitrite reductases, respectively, catalyze the first and second reactions. The genes involved in this process are nasA, which encodes nitrate reductase and is found within the operon nasABC, and nasD, which encodes nitrite reductase. These genes are subjected to transcriptional regulation, being repressed in the presence of ammonium and induced with either nitrate or nitrite. This type of regulation has also been described when the amino acids are used as nitrogen source in the minimal media. Furthermore, it has been observed that the microorganism growth depends on nitrogen source, obtaining the lowest growth rate in the presence of nitrate and aspartate. In this paper, we present the results of a comparative study of microorganism growth and transcriptomic analysis of the operon nasABC and gene nasD in different nitrogen sources. The results are the first ever produced in relation to amino acids as nitrogen sources within the Halobacteriaceae family.

Racism, Other Discriminations and Effects on Health

We study the probability of perceived racism/other forms of discrimination on immigrant and Spanish populations within different public spheres and show their effect on the health of immigrants using a cross-sectional design (ENS-06). Variables: perceived racism/other forms of discrimination (exposure), socio-demographic (explicative), health indicators (dependent). Frequencies, prevalences, and bivariate/multivariate analysis were conducted separately for men (M) and women (W). We estimated the health problems attributable to racism through the population attributable proportion (PAP). Immigrants perceived more racism than Spaniards in workplace (ORM = 48.1; 95 % CI 28.2–82.2), and receiving health care (ORW = 48.3; 95 % CI 24.7–94.4). Racism and other forms of discrimination were associated with poor mental health (ORM = 5.6; 95 % CI 3.9–8.2; ORW = 7.3; 95 % CI 4.1–13.0) and injury (ORW = 30.6; 95 % CI 13.6–68.7). It is attributed to perceived racism the 80.1 % of consumption of psychotropics (M), and to racism with other forms of discrimination the 52.3 % of cases of injury (W). Racism plays a role as a health determinant.

The Implementation, Application and Effects of the EU Directive on Copyright in the Information Society. CEPS Special Report No. 120, 19 November 2015

This study provides an ex-post evaluation of the EU copyright framework as provided by EU Directive 29/2001 on Copyright in the Information Society (InfoSoc Directive) and related legislation, focusing on four key criteria: effectiveness, efficiency, coherence and relevance. The evaluation finds that the EU copyright framework scores poorly on all four accounts. Of the four main goals pursued by the InfoSoc, only the alignment with international legislation can be said to have been fully achieved. The wider framework on copyright still generates costs by inhibiting content production, distribution and creation and generating productive, allocative and dynamic inefficiencies. Several problems also remain in terms of both internal and external coherence. Finally, espite its overall importance and relevance as a domain of legislation in the fields of content and media, the EU copyright framework is outdated in light of technological developments. Policy options to reform the current framework are provided in the CEPS companion study on the functioning and efficiency of the Digital Single Market in the field of copyright (CEPS Special Report No. 121/November 2015).

Shock tube studies of the effects of sharp-rising, long-duration overpressures on biological systems /

Shock tubes have been used successfully by a number of investigators to study the biological effects of variations in environmental pressures (1,2,3). Recently an unusually versatile laboratory pressurization source became available with the capability of consistently reproducing a wide variety of pressure-time phenomena of durations equal to and well beyond those associated with the detonation of nuclear devices (4). Thus it became possible to supplement costly full-scale field research in blast biology carried out at the Nevada Test Site (5,6) by using an economical yet realistic laboratory tool. In one exploratory study employing pressure pulses of 5 to 10 sec duration wherein the times to max overpressure and the magnitudes of the overpressures were varied, a relatively high tolerance of biological media to pressures well over 150 psi was demonstrated (7). In contrast, the present paper will describe the relatively high biological susceptibility to long duration overpressures in which the pressure rises occurred in single and double fast-rising steps.

Radiological emergency response : information for the public and the media.

Eleven commercial nuclear reactors used to generate electricity are currently operating at six sites in Illinois; no other state has as many nuclear reactors. In addition, there are two major research facilities in Illinois operated by the US Department of Energy (Argonne National Laboratory and FermiLab), uranium processing facilities at Metropolis and in nearby Paducah, Kentucky, several manufacturers of radiopharmaceuticals and other radioactive materials, thousands of radiation-producing machines used in medicine and industry, and a network of major arterial highways and rail lines over which radioactive material shipments move on a regular basis. Protecting the health and safety of Illinois citizens and the environment from the potentially harmful effects of ionizing radiation is a key function of IEMA'S Division of Nuclear Safety (DNS). That role is fulfilled through programs that monitor nuclear facilities around the clock, ensure the proper operation of radiation-producing equipment and the use of radioactive materials, and measure radioactivity in the environment to ensure no threats to public health exist.

Experience as a moderator of the media equation: the impact of flattery and praise

This study extends previous media equation research, which showed that the effects of flattery from a computer can produce the same general effects as flattery from humans. Specifically, the study explored the potential moderating effect of experience on the impact of flattery from a computer. One hundred and fifty-eight students from the University of Queensland voluntarily participated in the study. Participants interacted with a computer and were exposed to one of three kinds of feedback: praise (sincere praise), flattery (insincere praise), or control (generic feedback). Questionnaire measures assessing participants' affective state. attitudes and opinions were taken. Participants of high experience, but not low experience, displayed a media equation pattern of results, reacting to flattery from a computer in a manner congruent with peoples' reactions to flattery from other humans. High experience participants tended to believe that the computer spoke the truth, experienced more positive affect as a result of flattery, and judged the computer's performance more favourably. These findings are interpreted in light of previous research and the implications for software design in fields such as entertainment and education are considered. (C) 2004 Elsevier Ltd. All rights reserved.

A potential role for isothermal calorimetry in studies of the effects of thermodynamic non-ideality in enzyme-catalyzed reactions

Attention is drawn to the feasibility of using isothermal calorimetry for the characterization of enzyme reactions under conditions bearing greater relevance to the crowded biological environment, where kinetic parameters are likely to differ significantly from those obtained by classical enzyme kinetic studies in dilute solution. An outline of the application of isothermal calorimetry to the determination of enzyme kinetic parameters is followed by considerations of the nature and consequences of crowding effects in enzyme catalysis. Some of those effects of thermodynamic non-ideality are then illustrated by means of experimental results from calorimetric studies of the effect of molecular crowding on the kinetics of catalysis by rabbit muscle pyruvate kinase. This review concludes with a discussion of the potential of isothermal calorimetry for the experimental determination of kinetic parameters for enzymes either in biological environments or at least in media that should provide reasonable approximations of the crowded conditions encountered in vivo. Copyright (C) 2004 John Wiley Sons, Ltd.

Three-dimensional simulation of the rolling of a saturated fibro-porous media

This paper describes recent advances made in computational modelling of the sugar cane liquid extraction process. The saturated fibro-porous material is rolled between circumferentially grooved rolls, which enhance frictional grip and provide a low-resistance path for liquid flow during the extraction process. Previously reported two-dimensional (2D) computational models, account for the large deformation of the porous material by solving the fully coupled governing fibre stress and fluid-flow equations using finite element techniques. While the 2D simulations provide much insight into the overarching cause-effect relationships, predictions of mechanical quantities such as roll separating force and particularly torque as a function of roll speed and degree of compression are not satisfactory for industrial use. It is considered that the unsatisfactory response in roll torque prediction may be due to the stress levels that exist between the groove tips and roots which have been largely neglected in the geometrically simplified 2D model. This paper gives results for both two- and three-dimensional finite element models and highlights their strengths and weaknesses in predicting key milling parameters. (c) 2005 Elsevier B.V. All rights reserved.

Prediction of slurry transport in SAG mills using SPH fluid flow in a dynamic DEM based porous media

DEM modelling of the motion of coarse fractions of the charge inside SAG mills has now been well established for more than a decade. In these models the effect of slurry has broadly been ignored due to its complexity. Smoothed particle hydrodynamics (SPH) provides a particle based method for modelling complex free surface fluid flows and is well suited to modelling fluid flow in mills. Previous modelling has demonstrated the powerful ability of SPH to capture dynamic fluid flow effects such as lifters crashing into slurry pools, fluid draining from lifters, flow through grates and pulp lifter discharge. However, all these examples were limited by the ability to model only the slurry in the mill without the charge. In this paper, we represent the charge as a dynamic porous media through which the SPH fluid is then able to flow. The porous media properties (specifically the spatial distribution of porosity and velocity) are predicted by time averaging the mill charge predicted using a large scale DEM model. This allows prediction of transient and steady state slurry distributions in the mill and allows its variation with operating parameters, slurry viscosity and slurry volume, to be explored. (C) 2006 Published by Elsevier Ltd.

Folate supplementation fails to affect vascular function and carotid artery intima media thickness in cyclosporin A-treated renal transplant recipients

Background: Cyclosporin A (CsA)-treated renal transplant recipients (RTR) exhibit relative hyperhomocystinemia and vascular dysfunction. Folate supplementation lowers homocysteine and has been shown to improve vascular function in healthy subjects and patients with coronary artery disease. The aim of this study was to assess the effects of 3 months of folate supplementation (5 mg/day) on vascular function and structure in RTR. Methods: A double-blind, placebo-controlled crossover study was conducted in 10 CsA-treated RTR. Vascular structure was measured as carotid artery intima media thickness (IMT) and function was assessed as changes in brachial artery diameter during reactive hyperemia (RE) and in response to glyceryl trinitrate (GTN). Function data were analyzed as absolute and percent change from baseline and area under the diameter/time curve. Blood samples were collected before and after supplementation and analyzed for total plasma homocysteine, folate, vitamin B-12 and asymmetric dimethyl arginine (ADMA) in addition to regular measures of hemoglobin, hematocrit, mean corpuscular volume (MCV) and serum creatinine. Results: Folate supplementation significantly increased plasma folate by 687% (p < 0.005) and decreased homocysteine by 37% (p < 0.05) with no changes (p > 0.05) in vitamin B 12 or ADMA. There were no significant (p > 0.05) changes in vascular structure or function during the placebo or the folate supplementation phases; IMT; placebo pre mean +/- SD, 0.52 +/- 0.12, post 0.50 +/- 0.11; folate pre 0.55 +/- 0.17, post 0.49 +/- 10.20 mm 5% change in brachial artery diameter (RH, placebo pre 10 +/- 8, post 6 +/- 5; folate pre 9 +/- 7, post 7 +/- 5; GTN, placebo pre 18 +/- 10, post 17 +/- 9, folate pre 16 +/- 9, post-supplementation 18 +/- 8). Conclusion: Three months of folate supplementation decreases plasma homocysteine but has no effect on endothelial function or carotid artery IMT in RTR.

Factors affecting the durability of 5.25 inch floppy diskette media and its mechanisms of wear

This project is targeted towards establishing the durability and mechanisms of wear involved in the use of 5.25 inch magnetic floppy diskettes with particular reference to the media manufactured by the Minnesota Mining and Manufacturing Company, 3M Center, St. Paul, Minnesota, USA. In the present work most stress has been laid on the presentation of the conclusions drawn from the results obtained using samples produced specifically for this project. These samples were produced on the pilot plant at 3MTM, St. Paul, USA and are identified by the code 58759-4 with sample numbers SR1 to SR4 each with different lubrication conditions. All of the categories have been produced with four different surface roughnesses by varying the degree of burnishing. It has been found that the mechanisms of wear are related to a fatigue process. Some surprises have been noted in respect of the value of burnishing compared to the observations made elsewhere. Good reasons for these observed differences have been noted, however, and it will be shown that these are merely superficial and not concerned with wear of any real type. The present work reports the effects of the changes in the media's lubrication status and its surface topography as well as presenting evidence for the suggested wear mechanisms.