Hydrazides and hydrazones as versatile Michael-Donors for iminium-catalyzed conjugate addition reactions

396 : il., graf.

Organotitanium and niobium chemistry. I. Structure and reactivity of a titanium ethylene complex. II. Reactivity of decamethyl niobocene derivatives

The synthesis and X-ray diffraction study of bis(pentamethylcyclopentadienyl) ethylene titanium (I) are reported. This complex represents the first example of an isolable ethylene adduct of a group IV metal, a key intermediate in Ziegler-Natta olefin polymerization schemes. While treatment of I with ethylene leads to only traces of polymer after months, I participates in a wide range of stoichiometric and catalytic reactions. These include the catalytic conversion of ethylene specifically to butadiene and ethane and the catalytic isomerization of alkenes. Detailed studies have been carried out on the stoichiometric reactions of I with nitriles and alkynes. At low temperatures, nitriles react to form metallacycloimine species which more slowly undergo a formal 1,3-hydrogen shift to generate metallacycloeneamines. The lowest energy pathway for this rearrangement is an intramolecular hydrogen shift which is sensitive to the steric bulk of the R substituent. The reactions of I with alkynes yield metallacyclopentene complexes with high regioisomer selectivity. Carbonylation of the metallacyclopentene (η-C₅Me₅5)₂TiC(CH₃)=C(CH₃)CH₂ under relatively mild conditions cleanly produces the corresponding cyclopentenone and [C₅(CH₃)₅]₂Ti(CO)₂. Compounds derived from CO₂ and acetaldehyde have also been isolated.

The synthesis and characterization of bis-(η-pentamethylcyclopentadienyl) niobium(III) tetrahydroborate (II) are described and a study of its temperature-dependent proton NMR spectroscopic behavior is reported. The complex is observed to undergo a rapid intramolecular averaging process at elevated temperatures. The free energy of activation, ΔG^≠ = 16.4 ± 0.4 kcal/mol, is calculated. The reinvestigation of a related compound, bis(η-cyclopentadienyl)niobium(III) tetrahydroborate, established ΔG^≠ = 14.6 ± 0.2 kcal/mol for the hydrogen exchange process. The tetrahydroborate complex, II reacts with pyridine and dihydrogen to yield (η-C₅Me₅5)₂NbH₃ (III). The reactivity of III with CO and ethylene is reported.

Synthetic, kinetic and mechanistic studies in early transition metal systems. I. α- and β-hydrogen elimination reactions in derivatives of permethyltitanocene, -zirconocene, and -hafnocene. II. The reactions of aluminum alkyls with derivatives of permethylniobocene

The thermal decomposition of Cp*Ti(CH_3)_2 (Cp*≡ ƞ^5-C_5Me_5) toluene solution follows cleanly first-order kinetics and produces a single titanium product Cp*(C_5Me_4CH_2)Ti(CH_3) concurrent with the evolution of one equivalent of methane. Labeling studies using Cp*_2Ti- (CD_3)_2 and (Cp*-d_(15))_2Ti(CH_3)_2 show the decomposition to be intramolecular and the methane to be produced by the coupling of a methyl group with a hydrogen from the other TiCH_3 group. Activation parameters, ΔH^‡ and ΔS^‡, and kinetic deuterium isotope effects have been measured. The alternative decomposition pathways of α-hydrogen abstraction and a-hydrogen elimination, both leading to a titanium-methylidene intermediate, are discussed.

The insertion of unactivated acetylenes into the metal-hydride bonds of Cp*_2MH_2 (M = Zr, Hf) proceeds rapidly at low temperature to form monoand/ or bisinsertion products, dependent upon the steric bulk of the acetylene substituents. Cp*_2M(H)(C(Me)=CHMe), Cp*_2M(H)(CH=CHCMe_3), Cp*_2M(H)-(CH=CHPh), Cp*_2M(CH=CHPh)_2, Cp*_2M(CH=CHCH_3)_2 and Cp*_2Zr- (CH=CHCH_2CH_3)_2 have been isolated and characterized. To extend the study of unsaturated-carbon ligands, Cp*_2M(C≡CCH_3)_2 have been prepared by treating Cp*_2MCl_2 with LiC≡CCH_3. The reactivity of many of these complexes with carbon monoxide and dihydrogen is surveyed. The mono(2- butenyl) complexes Cp*_2M(H)(C(Me)=CHMe) rearrange at room temperature, forming the crotyl-hydride species Cp*_2M(H)(ƞ^3-C_4H_7). The bis(propenyl) and bis(l-butenyl) zirconium complexes Cp*_2Zr(CH=CHR)_2 (R = CH_3, CH_2CH_3) also rearrange, forming zirconacyclopentenes. Labeling studies, reaction chemistry, and kinetic measurements, including deuterium isotope effects, demonstrate that the unusual 6-hydrogen elimination from an sp^2-hybridized carbon is the first step in these latter rearrangements but is not observed in the former. Details of these mechanisms and the differences in reactivity of the zirconium and hafnium complexes are discussed.

The reactions of hydride- and alkyl-carbonyl derivatives of permethylniobocene with equimolar amounts of trialkylaluminum reagents occur rapidly producing the carbonyl adducts Cp*_2Nb(R)(COAlR'_3) (R = H, CH_3, CH_2CH_3, CH_2CH_2Ph, C(Me)=CHMe; R' = Me, Et). The hydride adduct Cp*_2NbH_3•AlEt_3 has also been formed. In solution, each of these compounds exists in equilibrium with the uncomplexed species. The formation constants for Cp*_2Nb(H)(COA1R'_R) have been measured. They indicate the steric bulk of the Cp* ligands plays a deciding factor in the isolation of the first example of an aluminum Lewis acid bound to a carbonyl-oxygen in preference to a metalhydride. Reactions of Cp*_2Nb(H)CO with other Lewis acids and of the one:one adducts with H_2, CO and C_2H_4 are also discussed.

Cp*_2Nb(H)(C_2H_4) also reacts with equimolar amounts of trialkylaluminum reagents, forming a one:one complex that ^1H NMR spectroscopy indicates contains a Nb-CH_2CH_2-Al bridge. This adduct also exists in equilibrium with the uncomplexed species in solution. The formation constant for Cp*_2N+/b(H)(CH_2CH_2ĀlEt_3) has been measured. Reactions of Cp*_2Nb(H)(C_2H_4) with other Lewis acids and the reactions of Cp*_2N+b(H)- (CH_2CH_2ĀlEt_3) with CO and C_2H_4 are described, as are the reactions of Cp_*2Nb(H)(CH_2=CHR) (R = Me, Ph), Cp*_2Nb(H)(CH_3C≡CCH_3) and Cp*_2Ti-(C_2H_4) with AlEt_3.

Hydrogen-Atom Transfer Photochemistry of Tetrakis(µ-pyrophosphito)diplatinate(II)

In many senses, the hydrogen-atom transfer reactions observed with the triplet excited state of pyrophosphito-bridged platinum(II) dimers resemble the reactions of organic ketone nπ* states. The first two chapters describe our attempts to understand the reactivity differences between these two chromophores. Reactivity of the metal dimers is strongly regulated by the detailed nature of the ligands that ring the axial site, the hydrogen-abstraction center. A hydrogen-bonded network linking the ligands facilitates H-atom transfer quenching with alcohols through the formation of a hydrogen-bonded complex between the alcohol and a dimer. For substrates of equal C-H bond strength that lack a hydroxyl group (e.g., benzyl hydrocarbons), the quenching rate is several orders of magnitude slower.

The shape and size of the axial site, as determined by the ligands, also discriminate among quenchers by their steric characteristics. Very small quenchers quench slowly because of high entropies of activation, while very large ones have large enthalpic barriers. The two effects find a balance with quenchers of "just the right size."

The third chapter discusses the design of a mass spectrometer that uses positron annihilation to ionize neutral molecules. The mass spectrometer creates positron-molecule adducts whose annihilation produces fragmentation products that may yield information on the bonding of positrons in such complexes.

Mechanism and applications of the photochemistry of Bis(η^5-cyclopentadienyl)titanacyclobutanes

The photochemically induced reductive elimination of cyclopropanes from bis(η⁵-cyclopentadienyl)titanacyclobutanes has been examined. Stereochemical labelling studies indicate that the cyclopropane is initially formed in a 6±1:1, ratio favoring retention of stereochemistry. The starting titanacyclobutane is isomerized during the course of the reaction. The isomerization of the starting material results from metal-carbon bond homolysis to yield a 1,4-biradical, which can either close to give the starting material or generate cyclopropane. The 1,4-biradical can be observed through a cyclopropyl carbinyl rearrangement employing 2-bis(η⁵- cyclopentadienyl)titana-5,5-dimethylbicyclo[2.1.0]pentane, to give the titanium alkylidene, 1-bis(η⁵-cyclopentadienyl)titana-3,3-dimethyl-1,4- pentadiene, which can be observed directly by NMR at low temperature.

The oxidation of titanacyclobutanes by chemical and electrochemical methods also yields cyclopropanes. Reduction of the metal center does not yield cyclopropanes. Depending on the oxidant, stereochemically labelled titanacyclobutanes yield cyclopropanes that are between 7:1 and 100:1 retention:isomerization. The fragmentation reaction resembles the photochemically induced reductive elimination. Both result from formal oxidation of a metal-carbon bond, which then results in very rapid formation of cyclopropane.

The titanocene generated photochemically reacts with a variety of substrates even at low temperature. Titanocene can be generated in a glass at 77 K. The titanocene can be trapped in noncoordinating solvents in high yield with bulky internal acetylenes to give monoacetylene adducts of titanocene. Less bulky acetylenes give the titanacyclopentadienes. The titanocene can be trapped with olefins to give less stable adducts, which appear by NMR analysis to be intermediate in structure between a titanacyclopropane and an η² olefin adduct of titanocene. Reaction of titanocene with butadiene gives a stable product, which appears to be the s-trans butadiene adduct of titanocene. It does not isomerize on heating. Titanocene reacts with epoxides to give titanocene-µ-oxo polymer and olefin. Stereochemically labelled epoxides and episulfides yield isomerized olefin upon deoxygenation by titanocene. The observations are rationalized as a result of a 1,4-biradical formed by stepwise insertion of titanocene into a carbon-oxygen bond.

Investigations of group IVA transition metal mediated carbon-carbon bond forming reactions

Zirconocene aldehyde and ketone complexes were synthesized in high yield by treatment of zirconocene acyl complexes with trimethylaluminum or diisobutylaluminum hydride. These complexes, which are activated by dialkylaluminum chloride ligands, inserted unsaturated substrates such as alkynes, allenes, ethylene, nitriles, ketenes, aldehydes, ketones, lactones, and acid chlorides with moderate to high conversion. Insertion of aldehyde substrates yielded zirconocene diolate complexes with up to 20:1 (anti:syn) diastereoselectivity. The zirconocene diolates were hydrolyzed to afford unsymmetrical 1,2-diols in 40-80% isolated yield. Unsymmetrical ketones gave similar insertion yields with little or no diastereoselectivity. A high yielding one-pot method was developed that coupled carbonyl substrates with zirconocene aldehyde complexes that were derived from olefins by hydrozirconation and carbonylation. The zirconocene aldehyde complexes also inserted carbon monoxide and gave acyloins in 50% yield after hydrolysis.

The insertion reaction of aryl epoxides with the trimethylphoshine adduct of titanocene methylidene was examined. The resulting oxytitanacyclopentanes were carbonylated and oxidatively cleaved with dioxygen to afford y-lactones in moderate yields. Due to the instability and difficult isolation of titanocene methylidene trimethylphoshine adducts, a one-pot method involving the addition of catalytic amounts of trimethylphosphine to β,β-dimethyltitanacyclobutane was developed. A series of disubstituted aryl epoxides were examined which gave mixtures of diastereomeric insertion products. Based on these results, as well as earlier Hammett studies and labeling experiments, a biradical transition state intermediate is proposed. The method is limited to aryl substituted epoxide substrates with aliphatic examples showing no insertion reactivity.

The third study involved the use of magnesium chloride supported titanium catalysts for the Lewis acid catalyzed silyl group transfer condensation of enol silanes with aldehydes. The reaction resulted in silylated aldol products with as many as 140 catalytic turnovers before catalyst inactivation. Low diastereoselectivities favoring the anti-isomer were consistent with an open transition state involving a titanium atom bound to the catalyst surface. The catalysts were also used for the aldol group transfer polymerization of t-butyldimethylsilyloxy-1-ethene resulting in polymers with molecular weights of 5000-31,000 and molar mass dispersities of 1.5-2.8. Attempts to polymerize methylmethacrylate using GTP proved unsuccessful with these catalysts.

Catalisadores à base de platina frente a correntes de H2 contendo acetaldeído geradas via reforma do etanol

Devido ao efeito estufa, a produção de hidrogênio a partir da reação de reforma do bioetanol tem se tornado um assunto de grande interesse em catálise heterogênea. Os catalisadores à base de Pt são empregados nos processos de purificação de H2 e também em eletrocatalisadores das células a combustível do tipo membrana polimérica (PEMFC). O hidrogênio obtido a partir da reforma do etanol contém como contaminante o acetaldeído e pequenas quantidades de CO. Assim, pode-se prever que muitas reações podem ocorrer na presença de catalisadores de Pt durante o processo de purificação do H2 e mesmo no próprio eletrocatalisador. Desta forma, este trabalho tem como objetivo descrever o comportamento do acetaldeído na presença de catalisadores de Pt. Para tanto foram preparados dois catalisadores, Pt/SiO2 e Pt/USY, contendo 1,5% de metal em ambos. Também foi estudado um eletrocatalisador (comercial) de Pt suportado em carvão (Pt/C). Os catalisadores foram caracterizados através das técnicas de análise textural, difração de raios X (DRX), quimissorção de H2, reação de desidrogenação do ciclohexano, espectroscopia no infravermelho de piridina adsorvida, dessorção a temperatura programada de n-butilamina (TPD de n-butilamina), dessorção a temperatura programada de CO2 (TPD-CO2), análise termogravimétrica, microscopia eletrônica de varredura (MEV) e espectroscopia de dispersão de energia (EDS). Os testes catalíticos foram realizados entre as temperaturas de 50 e 350 C em corrente contendo acetaldeído, H2 e N2. Foi observado que as propriedades ácido-básicas dos suportes promovem as reações de condensação com formação de éter etílico e acetato de etila. O acetaldeído em catalisadores de Pt sofre quebra das ligações C-C e C=O. A primeira ocorre em uma ampla faixa de temperaturas, enquanto a segunda apenas em temperaturas abaixo de 200 C. A quebra da ligação C-C produz metano e CO. Já a quebra da ligação C=O gera carbono residual nos catalisadores, assim como espécies oxigênio, que por sua vez são capazes de eliminar o CO da superfície dos catalisadores. Nota-se que o tipo de suporte utilizado influencia na distribuição de produtos, principalmente a baixas temperaturas. Além disso, constatou-se que a descarbonilação não é uma reação sensível à estrutura do catalisador. Verificou-se também a presença de resíduos sobre os catalisadores, possivelmente oriundos não somente da quebra da ligação C=O, mas também de reações de polimerização

Rydberg states of diatomic and polyatomic molecules using model potentials

A simple model potential is used to calculate Rydberg series for the molecules: nitrogen, oxygen, nitric oxide, carbon monoxide, carbon dioxide, nitrogen dioxide, nitrous oxide, acetylene, formaldehyde, formic acid, diazomethane, ketene, ethylene, allene, acetaldehyde, propyne, acrolein, dimethyl ether, 1, 3-butadiene, 2-butene, and benzene. The model potential for a molecule is taken as the sum of atomic potentials, which are calibrated to atomic data and contain no further parameters. Our results agree with experimentally measured values to within 5-10% in all cases. The results of these calculations are applied to many unresolved problems connected with the above molecules. Some of the more notable of these problems are the reassignment of states in carbon monoxide, the first ionization potential of nitrogen dioxide, the interpretation of the V state in ethylene, and the mystery bands in substituted ethylenes, the identification of the R and R’ series in benzene and the determination of the orbital scheme in benzene from electron impact data.

Molecular biomarkers and toxic consequences of impact by organic pollution in aquatic organisms

Organic contaminants are readily bioaccumulated by aquatic organisms. Exposure to and toxic effects of contaminants can be measured in terms of the biochemical responses of the organisms (i.e. molecular biomarkers). The hepatic biotransformation enzyme cytochrome P4501A (CYP1A) in vertebrates is specifically induced by organic contaminants such as aromatic hydrocarbons, PCBs and dioxins, and is involved in chemical carcinogenesis via catalysis of the covalent binding of organic contaminants to DNA (DNA-adducts). Hepatic CYP1A induction has been used extensively and successfully as a biomarker of organic contaminant exposure in fish. Fewer but equally encouraging studies in fish have used hepatic bulky, hydrophobic DNA-adducts as biomarkers of organic contaminant damage. Much less is known of the situation in marine invertebrates, but a CYPlA-like enzyme with limited inducibility and some potential for biomarker application is indicated. Stimulation of reactive oxygen species (ROS) production is another potential mechanism of organic contaminant-mediated DNA and other damage in aquatic organisms. A combination of antioxidant (enzymes, scavengers) and pro-oxidant (oxidised DNA bases, lipid peroxidation) measurements may have potential as a biomarker of organic contaminant exposure (particularly those chemicals which do not induce CYP1A) and/or oxidative stress, but more studies are required. Both CYP1A- and ROS-mediated toxicity are indicated to result in higher order deleterious effects, including cancer and other aspects of animal fitness.

Estudo das alterações cardiovasculares e metabólicas em modelo experimental de programação metabólica: efeito de extrato da casca de uva Vitis vinífera

Estudos epidemiológicos e experimentais têm sugerido que fatores de risco cardiovasculares podem ser parcialmente atribuídos às influências do ambiente em que vive o indivíduo, e que a nutrição materna influencia na programação de alterações metabólicas e cardiovasculares no indivíduo adulto e que caracterizam a síndrome metabólica (SM). Em contrapartida, estudos prévios de nosso laboratório demonstram que o extrato da casca de uva Vitis labrusca (GSE) possui efeito vasodilatador, antihipertensivo e antioxidante. Desta forma, o objetivo deste estudo foi avaliar o efeito do tratamento oral com GSE (200mg/kg/dia), sobre as alterações cardiovasculares e metabólicas e estresse oxidativo observados na prole adulta (fêmea e machos) com 3 e 6 meses, cujas mães foram submetidas a uma dieta rica em gordura (hiperlipídica) durante a lactação. Quatro grupos de ratas foram alimentados com dietas experimentais: controle (7% de gordura); controle + GSE (7% de gordura + GSE), hiperlipídica (24% de gordura); hiperlipídica + GSE (24% de gordura + GSE) durante a lactação. Após o desmame, todos os filhotes passaram a ser alimentados com uma dieta controle e foram sacrificados aos 3 ou 6 meses de idade. A pressão arterial sistólica (PAS) foi medida por pletismografia de cauda e o efeito vasodilatador da acetilcolina (ACh) foi avaliado em leito arterial mesentérico (LAM) perfundido. Foram avaliados o peso corporal, adiposidade (intra-abdominal e gonadal), níveis plasmáticos de colesterol total, triglicerídeos, glicose e insulina, e a resistência à insulina (RI) foi calculada pelo índice de HOMA IR. As expressões do IRS-1, Akt e GLUT-4 foram determinadas em músculo soleus. O dano oxidativo, níveis de nitritos e a atividade das enzimas antioxidantes: superóxido dismutase, catalase e glutationa peroxidase foram dosados no plasma e homogenato de LAM. A PAS e tecido adiposo foram aumentados nas proles adultas de ambos os sexos e idades do grupo hiperlipídico e revertidos pelo tratamento com o GSE. A resposta vasodilatadora à ACh em LAM não foi diferente entre os grupos de ambos os sexos, mas foram reduzidas com o envelhecimento. Nas proles fêmeas e machos do grupo hiperlipídico também foram observados o aumento dos níveis de triglicerídeos, de glicose e RI em ambas as idades e foram reduzidos pelo GSE. No grupo hiperlipídico houve redução nas expressões de IRS-1, Akt e GLUT-4 e o GSE reverteu estas expressões. Os níveis plasmáticos de malondialdeído estavam aumentados e os níveis de nitrito diminuídos no grupo hiperlipídico, de ambos os sexos e idades e foram revertidos pelo GSE. As atividades das enzimas antioxidantes no plasma e no mesentério foram reduzidas no grupo hiperlipídico e restauradas pelo GSE. Em conclusão, O GSE parece proteger as proles fêmeas e machos, cujas mães foram expostas a uma dieta hiperlipídica durante a lactação, dos fatores de riscos cardiovasculares, proporcionando uma fonte alternativa nutricional para a prevenção da SM.

Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.

Capacidade antioxidante e a prática de atividade física em indivíduos com lesão medular cervical

A lesão medular está associada a uma série de alterações bioquímicas e decomposição corporal. O aumento da gordura corporal e seu acúmulo na regiãoabdominal aliados a processos infecciosos decorrentes da lesão medular podemacarretar o incremento da concentração plasmática da proteína c-reativa (PCR).Tanto a gordura corporal quanto a elevada concentração da PCR estimulam aprodução de espécies reativas de oxigênio, favorecendo o desequilíbrio oxidativo e odesencadeamento de doenças. É possível que a prática de atividade física regularpossa atuar de modo benéfico através da melhor distribuição da gordura corporal eadaptação dos sistemas antioxidantes nesses indivíduos. Considerando aimportância deste tema e a escassos estudos sobre o assunto, o objetivo desteestudo foi comparar, em indivíduos com lesão medular cervical a composiçãocorporal e indicadores bioquímicos de estado antioxidante em indivíduos fisicamenteativos e não ativos. Participaram do estudo 24 tetraplégicos do gênero masculino(3210 anos de idade e 108 anos de tempo de lesão), divididos em dois grupos,fisicamente ativos (n=15, com pratica de atividade física há pelo menos 3 meses, 3vezes/semana ou mais, totalizando tempo mínimo de 150 minutos/semana) e nãoativos (n=9). A composição corporal foi determinada por absorciometria de duplaemissão de raio-X. Amostras de sangue foram coletadas após jejum de 12 horaspara determinação dos indicadores bioquímicos: de capacidade antioxidante, ácidoúrico, bilirrubina, albumina, alfa-tocoferol, malondialdeído e PCR no plasma eatividade da superóxido dismutase em eritrócitos. O grupo não ativo apresentoumaior IMC (=0,003), gordura total (%) e de tronco (%) (=<0,001) do que o grupoppfisicamente ativo. Foi encontrada relação entre a PCR e a porcentagem de gorduratotal (r=0,72, p=<0,001), de tronco (r=0,70, p=<0,001), massa gorda total (r=0,73,p=<0,001) e de tronco (r=0,67, p=0,001). Não houve diferença significativa entre osindicadores bioquímicos de estado antioxidante, exceto a concentração da PCR quefoi maior no grupo não ativo (p=0,034). Considerando todos indivíduos, 50% apresentavam deficiência de alfa-tocoferol (concentração plasmática <11,6 mol/L).Foi observada relação negativa entre a concentração plasmática de alfa-tocoferol e aPCR (r=-0,18, =0,038).No grupo ativo houve correlação positiva entre a razãoptempo de atividade física:tempo de lesão e concentração plasmática demalondialdeido (r=0,38, =0,014). Nossos resultados, analisados em conjunto,psugerem que prática contínua de atividade física após a lesão atua auxiliando a umamelhor composição corporal e, possivelmente, a uma menor concentraçãoplasmática de PCR. O estado nutricional inadequado em alfa-tocoferol podecomprometer capacidade antioxidante, sendo necessárias medidas de apoionutricional para adequar a ingestão de alfa-tocoferol para este grupo.

Estudos dos efeitos antioxidantes e anti-inflamatórios da própolis sobre as células RAW 264.7 e na resposta inflamatória pulmonar aguda causada pela exposição à fumaça de cigarro em camundongos

A doença pulmonar obstrutiva crônica (DPOC) causa a redução da capacidade respiratória e seu desenvolvimento é associado à fumaça de cigarro. O cigarro possui mais de 4800 substâncias tóxicas e causa a morte de seis milhões de pessoas por ano no mundo. Estudos buscam meios de reverter os males causados pela fumaça de cigarro. A própolis (P) é um produto produzido por abelhas que possui várias propriedades. O objetivo deste trabalho foi avaliar os efeitos antioxidantes da P em macrófagos murinos e na inflamação pulmonar aguda induzida pela fumaça de cigarro (CS) em camundongos. A análise dos compostos fitoquímicos do extrato alcóolico da P (EAP) foi feita por cromatografia gasosa acoplada à espectrometria de massa (GC-MS). Células da linhagem RAW 264.7 foram tratadas em diversas concentrações de P durante 24 horas. Após tratamento, as seguintes análises foram realizadas: polifenóis totais; viabilidade celular (MTT); potencial redutor (DPPH); espécies reativas de oxigênio totais (ROS) e de malondialdeído (MDA). Trinta camundongos C57BL/6 foram divididos em 3 grupos (n=10/grupo): Controle+P, CS e CS+P. Ambos os grupos CS foram expostos a 6 cigarros/dia durante 5 dias. O grupo CS foi tratado com veículo. O pulmão e o lavado broncoalveolar (BAL) foram coletados para análise histológica e contagem diferencial de células. As análises para mieloperoxidase (MPO), superóxido dismutase (SOD), catalase (CAT), glutationa peroxidase (GPx), glutationa reduzida (GSH) e oxidada (GSSG), MDA, nitrito e western blotting para TNF-alfa foram realizadas. A análise fitoquímica do EAP mostrou a presença dos ácidos hidrocinâmicos e coumárico, a artepilina C e a drupanina. Foi observado o aumento concentração-dependente dos níveis de polifenóis totais (p<0,001), do MTT (p<0,001) e do DPPH (p<0,001), e o inverso com o MDA (p<0,001). Os níveis de ROS diminuem nas concentrações de 15,6 e 31,2 mg/mL (p<0,05, ambos). A histologia pulmonar do grupo Controle+P foi similar ao do CS+P e foi observado um influxo de macrófagos e neutrófilos no grupo CS (p<0,01 e p<0,001, respectivamente). Os níveis de MPO foram aumentados no grupo CS (526,534,72 mU/mg ptn, p<0,01), mas houve uma redução no grupo CS+P (385,127,64 mU/mg ptn, p<0,05) comparável ao Controle+P (13412,99 mU/mg ptn, p<0,001), o mesmo aconteceu com as enzimas antioxidantes: SOD (Controle+P: 523,529,6 U/mg ptn; CS: 523,529,6 U/mg ptn, p<0,001; CS+P: 246,815,69 U/mg ptn, p<0,001); CAT (Controle+P: 37,383,39 U/mg ptn; CS: 92,686,24 U/mg ptn, p<0,001; CS+P: 59,844,55 U/mg ptn, p<0,05); GPx (Controle+P: 2,230,17 (M/min/mg ptn) x 10-1; CS: 4,510,31 (M/min/mg ptn) x 10-1, p<0,001; CS+P: 2,640,19 (M/min/mg ptn) x 10-1, p<0,05). O inverso ocorreu com a relação GSH/GSSG (Controle+P: 1,0880,17; CS: 0,7360,07, p<0,05; CS+P: 1,2580,10, p<0,05). Os níveis de MDA (Controle+P: 0,2660,05 nMol/mg ptn; CS: 0,940,076 nMol/mg ptn, p<0,001; CS+P: 0,4980,06 nMol/mg ptn, p<0,01) e de nitrito (Controle+P: 50,014,19 Mol/mg ptn; CS: 108,77,73 Mol/mg ptn, p<0,001; CS+P: 58,843,42 nMol/mg ptn, p<0,01) estavam aumentados no CS que em outros grupos. A expressão de TNF-α foi observada no grupo CS. O tratamento da P apresentou ação anti-inflamatória e antioxidante em macrófagos e em camundongos expostos à fumaça de cigarro, possivelmente pela ação dos polifenóis presentes nela

Função pulmonar, estresse oxidativo e marcadores inflamatórios na lesão pulmonar aguda induzida por lipopolissacarídeo: diferentes efeitos da atorvastatina, pravastatina e simvastatina

Nosso objetivo foi determinar que tipo de estatina pode atenuar a lesão pulmonar aguda (LPA) induzida por lipopolissacarídeo (LPS) em camundongos da linhagem C57Bl/6. Trinta camundongos machos ( 23 g) foram divididos em 5 grupos (n=6 cada): grupo LPS (10 mg/kg) administrado intraperitonealmente (i.p.), LPS mais atorvastatina (10 mg/kg/dia; grupo LPS+A), LPS mais pravastatina (5 mg/kg/dia; grupo LPS+P) e LPS mais sinvastatina (20 mg/kg/dia; grupo LPS+S). O grupo controle recebeu salina i.p.. Em um grupo separado de camundongos (n=5), a soma das pressões pulmonares resistivas e viscoelásticas (DeltaPtot) e elastância estática (E[st]) foram medidas. Um dia após a administração de LPS os camundongos foram sacrificados (24 h) por deslocamento cervical e logo em seguida foi realizado lavado broncoalveolar (LBA). Os pulmões foram removidos para análise histopatológica e homogeneizados para análises bioquímicas (ELISA, catalase, superóxido dismutase, mieloperoxidase, substâncias reativas ao ácido tiobarbitúrico, carbonilação de proteínas e método de Griess). A quantidade de leucócitos foi menor no grupo LPS+P (p<0,01) e LPS+S (p<0,05) em comparação ao grupo LPS. Os níveis de MCP-1 e IL-6 reduziram no grupo LPS+P (p<0,01), enquanto o grupo LPS + S mostrou redução apenas nos níveis de IL-6 (p<0,05) em comparação ao grupo LPS. Marcadores redox (superóxido dismutase e catalase) foram menores no grupo LPS+A (p<0,01) em comparação ao grupo LPS. A peroxidação lipídica (malondialdeído e hidroperóxidos) diminuiu em todos os grupos tratados (p<0,05) quando comparados ao grupo LPS. A mieloperoxidase foi menor no grupo LPS+P (p<0,01) quando comparado ao grupo LPS. DeltaPtot e E(st) foram, significativamente, maiores no grupo LPS do que nos outros grupos. Nossos resultados sugerem que atorvastatina e pravastatina, mas não a sinvastatina, exibiram ações anti-inflamatórias e antioxidantes na LPA induzida por LPS.

Avaliação de carbonilas na atmosfera interior e exterior de salas de aula de escolas públicas

Compostos carbonílicos representam uma das principais classes de poluentes atmosféricos e são frequentemente reportados em estudos de poluição atmosférica de interiores. São emitidos para a atmosfera a partir de uma variedade de fontes naturais e antropogênicas. Em projeto empreendido em 2011 pela Secretaria de Estado de Educação do Estado do Rio de Janeiro,foi implementada a climatização em todas as salas de aula de todas as escolas da rede pública estadual. A escala de exposição de ocupantes à climatização, em salas de aula, não apresenta precedentes em nosso estado e representa uma tendência de todo o país. Como é um projeto recente, não há dados a respeito da qualidade do ar interior nesses ambientes e, portanto, das consequências na saúde dos ocupantes. Os procedimentos foram baseados na metodologia TO-11A da U.S.EPA. A técnica de amostragem foi por via seca com reação química, empregando-se cartuchos de sílica revestidos de octadecil (SiO2-C18) impregnados com 2,4-dinitrofenilhidrazina. As carbonilas foram analisados através de Cromatografia Líquida de Alta Eficiência com detecção por UV. Foram encontradas concentrações de formaldeído na faixa de 3,59 a 26,62 μg m-3 (interior) e 0,74 a 23,47 μg m-3 (exterior), acetaldeído na faixa de 0,19 a 259,47 μg m-3 (interior) e 1,19 a 127,51 μg m-3 (exterior), acetona+acroleína na faixa de 0,00 a 48,45 μg m-3 (interior) e 0,00 a 37,00 μg m-3 (exterior). Os valores encontrados geralmente não ultrapassaram os limites determinados por organismos internacionais