997 resultados para Line segment detector


Relevância:

20.00% 20.00%

Publicador:

Resumo:

O trabalho indica alguns sites a serem considerados como alternativa para acesso gratuito a livros on-line disponíveis na Internet e destinados à área médica.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The “CMS Safety Closing Sensors System” (SCSS, or CSS for brevity) is a remote monitoring system design to control safety clearance and tight mechanical movements of parts of the CMS detector, especially during CMS assembly phases. We present the different systems that makes SCSS: its sensor technologies, the readout system, the data acquisition and control software. We also report on calibration and installation details, which determine the resolution and limits of the system. We present as well our experience from the operation of the system and the analysis of the data collected since 2008. Special emphasis is given to study positioning reproducibility during detector assembly and understanding how the magnetic fields influence the detector structure.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Os Sistemas de Informação Geográfica detêm um papel de crescente importância para a tomada de decisão ao nível do ordenamento do território, conforme o que a própria legislação evidencia. Existe uma carência de uniformização da informação para que possa existir um cruzamento eficiente e uma disponibilização mais facilitada à população e às diversas entidades. As instituições públicas, como é o caso do Instituto de Conservação e Florestas (ICNF I.P.), reconhecem esta necessidade, pelo que se propôs uma série de tarefas, para a concretização deste estágio, no sentido de a colmatar. Este instituto detém um papel de especial relevo na conservação do património natural assim como no ordenamento das áreas protegidas para que se possa usufruir das mesmas, sob um ponto de vista cada vez mais ecológico e promotor de desenvolvimento sustentável. A elaboração de um instrumento de gestão territorial, como se pode classificar a Carta de Desporto de Natureza (CDN), acarreta grande responsabilidade e exige um forte empenho, não apenas no envolvimento da população e das entidades que dele fruirão, mas no cumprimento da legislação existente quer para as atividades quer para o próprio território, no sentido da sua proteção, preservação e promoção de usos adequados. Neste trabalho procurou-se cumprir todas estas disposições sempre com o objetivo de, ao se construir normas de uniformização e ao se elaborar um exemplo de CDN para um território com tanto valor como é a Reserva Natural do Estuário do Tejo, tornar acessível a informação sobre esta área protegida. A intensão é também promover a motivação para a prática de um desporto natureza, saudável e em equilíbrio com o ambiente. O desafio não se ficou por aqui, havendo também a procura de utilização de Free Open Source Software, para que o processo de utilização e disponibilização informação SIG seja cada vez mais acessível e direta.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A presente tese reflete sobre os temas do desenvolvimento sustentável, da sustentabilidade corporativa, da responsabilidade social corporativa e das dimensões do Triple Bottom Line. O principal objetivo do nosso trabalho é contribuir para o conhecimento das relações que se estabelecem nas interseções entre a dimensão económica, social e ambiental da sustentabilidade corporativa, aqui designadas de relações híbridas. Neste sentido, desenvolveu-se um enquadramento teórico que fundamenta o modelo proposto, designado por Hybrid Bottom Line. De acordo com este enquadramento procurou-se conceber uma metodologia que permitisse analisar como é que estas relações de interseção entre economia-ambiente e economia-social se verificam e de que forma os seus resultados podem beneficiar a compreensão, avaliação e melhorias no entendimento da sustentabilidade corporativa, bem como possibilitar uma análise dirigida a fatores recombinantes específicos. Em complemento, foi desenvolvida uma proposta que permite posicionar o esforço desenvolvido pela empresa no âmbito da sustentabilidade e desta forma tipificar as suas ações. Nesta tese a abordagem empírica recaiu na análise dos relatórios de sustentabilidade publicados pelas empresas e baseados nas diretivas de relato propostas pelo Global Reporting Initiative. A amostra para o estudo abrangeu um total de 85 empresas de diferentes dimensões de 36 sectores económicos e representando 36 países de 5 continentes. A análise dos resultados foi feita utilizando diversos métodos de análise de dados (de frequência e de conteúdo) e análises estatísticas (análise de contingência, variância e de correspondências múltiplas) que permitiram observar as relações entre as dimensões do Triple Bottom Line, dando lugar à construção de uma matriz de relações híbridas. Seguidamente foi realizada uma análise longitudinal de uma das empresas da amostra tendo como referência a matriz híbrida obtida, assim como a tipificação da empresa no âmbito da sustentabilidade. Os resultados alcançados nas diferentes fases indicam que o enquadramento teórico que foi utilizado é útil para a análise das interseções entre as dimensões e permite uma avaliação dirigida a fatos ocorridos entre pares dimensionais, bem como projetar análises e posicionamentos futuros. Os resultados obtidos sugerem que a proposta apresentada é útil e deverá ser utilizada e desenvolvida noutros contextos. Esta tese contribui para a ideia de que a responsabilidade corporativa não deve ser só vista e operacionalizada como uma realidade de dimensões segmentadas mas também deve ser observada como um conjunto possível de interações que se manifestam nas interseções das suas diferentes dimensões.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Application of Experimental Design techniques has proven to be essential in various research fields, due to its statistical capability of processing the effect of interactions among independent variables, known as factors, in a system’s response. Advantages of this methodology can be summarized in more resource and time efficient experimentations while providing more accurate results. This research emphasizes the quantification of 4 antioxidants extraction, at two different concentration, prepared according to an experimental procedure and measured by a Photodiode Array Detector. Experimental planning was made following a Central Composite Design, which is a type of DoE that allows to consider the quadratic component in Response Surfaces, a component that includes pure curvature studies on the model produced. This work was executed with the intention of analyzing responses, peak areas obtained from chromatograms plotted by the Detector’s system, and comprehending if the factors considered – acquired from an extensive literary review – produced the expected effect in response. Completion of this work will allow to take conclusions regarding what factors should be considered for the optimization studies of antioxidants extraction in a Oca (Oxalis tuberosa) matrix.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

For esophageal reconstruction in newborns with esophageal atresia, esophageal reunion with an end-to-end anastomosis is the ideal procedure, although it may result in leaks and strictures due to tension on the suture line, mainly in cases with a wide gap between the ends. Circular myotomy (Livaditis' procedure) is the best method to elongate the proximal esophageal pouch and reduce anastomotic tension. This experimental investigation in dogs was undertaken to attempt to verify that circular myotomy decreases the anastomotic leak rate in newborns with wide gap esophageal atresia, and to analyze whether the technique promotes morphologic changes in the anastomotic scar. A pilot study demonstrated that it is necessary to resect more than 8 cm (40% of the total esophageal length) in order to obtain high leak rates. In the experimental project, such resection was performed in dogs divided into two groups (control group, anastomosis only, and experimental group, anastomosis plus circular myotomy in the proximal esophageal segment). The animals were killed in the 14th postoperative day, submitted to autopsy, and were evaluated as to the presence of leaks and strictures, as well as to the features (macroscopic and microscopic aspects) of the anastomosis. Leak rates were the same in both groups. Morphometric analysis revealed that in animals in the experimental group, the anastomotic scar was thinner than the control animals, and the isolated muscular manchette distal to the site of myotomy was replaced by fibrous tissue. Correspondingly, a decreased number of newly formed small vessels were noted in the experimental animals, compared to control animals. We concluded that circular myotomy does not decrease the incidence of anastomotic leaks, and it also promotes deleterious changes in anastomotic healing.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Field lab: Business project

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Field lab: Business project

Relevância:

20.00% 20.00%

Publicador:

Resumo:

As increasingly more sophisticated materials and products are being developed and times-to-market need to be minimized, it is important to make available fast response characterization tools using small amounts of sample, capable of conveying data on the relationships between rheological response, process-induced material structure and product characteristics. For this purpose, a single / twin-screw mini-extrusion system of modular construction, with well-controlled outputs in the range 30-300 g/h, was coupled to a in- house developed rheo-optical slit die able to measure shear viscosity and normal-stress differences, as well as performing rheo-optical experiments, namely small angle light scattering (SALS) and polarized optical microscopy (POM). In addition, the mini-extruder is equipped with ports that allow sample collection, and the extrudate can be further processed into products to be tested later. Here, we present the concept and experimental set-up [1, 2]. As a typical application, we report on the characterization of the processing of a polymer blend and of the properties of extruded sheets. The morphological evolution of a PS/PMMA industrial blend along the extruder, the flow-induced structures developed and the corresponding rheological characteristics are presented, together with the mechanical and structural characteristics of produced sheets. The application of this experimental tool to other material systems will also be discussed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Companies from the motorcycles components branch are dealing with a dynamic environment, resulting from the introduction of new products and the increase of market demand. This dynamic environment requires frequent changes in production lines and requires flexibility in the processes, which can cause reductions in the level of quality and productivity. This paper presents a Lean Six Sigma improvement project performed in a production line of the company's machining sector, in order to eliminate losses that cause low productivity, affecting the fulfillment of the production plan and customer satisfaction. The use of Lean methodology following the DMAIC stages allowed analyzing the factors that influence the line productivity loss. The major problems and causes that contribute to a reduction on productivity and that were identified in this study are the lack of standardization in the setup activities and the excessive stoppages for adjustment of the processes that caused an increase of defects. Control charts, Pareto analysis and cause-and-effect diagrams were used to analyze the problem. On the improvement stage, the changes were based on the reconfiguration of the line layout as well as the modernization of the process. Overall, the project justified an investment in new equipment, the defective product units were reduced by 84% and an increase of 29% of line capacity was noticed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The jet energy scale (JES) and its systematic uncertainty are determined for jets measured with the ATLAS detector using proton–proton collision data with a centre-of-mass energy of s√=7 TeV corresponding to an integrated luminosity of 4.7 fb −1 . Jets are reconstructed from energy deposits forming topological clusters of calorimeter cells using the anti- kt algorithm with distance parameters R=0.4 or R=0.6 , and are calibrated using MC simulations. A residual JES correction is applied to account for differences between data and MC simulations. This correction and its systematic uncertainty are estimated using a combination of in situ techniques exploiting the transverse momentum balance between a jet and a reference object such as a photon or a Z boson, for 20≤pjetT<1000 GeV and pseudorapidities |η|<4.5 . The effect of multiple proton–proton interactions is corrected for, and an uncertainty is evaluated using in situ techniques. The smallest JES uncertainty of less than 1 % is found in the central calorimeter region ( |η|<1.2 ) for jets with 55≤pjetT<500 GeV . For central jets at lower pT , the uncertainty is about 3 %. A consistent JES estimate is found using measurements of the calorimeter response of single hadrons in proton–proton collisions and test-beam data, which also provide the estimate for pjetT>1 TeV. The calibration of forward jets is derived from dijet pT balance measurements. The resulting uncertainty reaches its largest value of 6 % for low- pT jets at |η|=4.5 . Additional JES uncertainties due to specific event topologies, such as close-by jets or selections of event samples with an enhanced content of jets originating from light quarks or gluons, are also discussed. The magnitude of these uncertainties depends on the event sample used in a given physics analysis, but typically amounts to 0.5–3 %.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Measurements of the centrality and rapidity dependence of inclusive jet production in sNN−−−√=5.02 TeV proton--lead (p+Pb) collisions and the jet cross-section in s√=2.76 TeV proton--proton collisions are presented. These quantities are measured in datasets corresponding to an integrated luminosity of 27.8 nb−1 and 4.0 pb−1, respectively, recorded with the ATLAS detector at the Large Hadron Collider in 2013. The p+Pb collision centrality was characterised using the total transverse energy measured in the pseudorapidity interval −4.9<η<−3.2 in the direction of the lead beam. Results are presented for the double-differential per-collision yields as a function of jet rapidity and transverse momentum (pT) for minimum-bias and centrality-selected p+Pb collisions, and are compared to the jet rate from the geometric expectation. The total jet yield in minimum-bias events is slightly enhanced above the expectation in a pT-dependent manner but is consistent with the expectation within uncertainties. The ratios of jet spectra from different centrality selections show a strong modification of jet production at all pT at forward rapidities and for large pT at mid-rapidity, which manifests as a suppression of the jet yield in central events and an enhancement in peripheral events. These effects imply that the factorisation between hard and soft processes is violated at an unexpected level in proton--nucleus collisions. Furthermore, the modifications at forward rapidities are found to be a function of the total jet energy only, implying that the violations may have a simple dependence on the hard parton--parton kinematics.