Evaluation of the adequacy of diflubenzuron and dechlorane in toxic baits for leaf-cutting ants (Hymenoptera : Formicidae) based on formicidal activity

Studies assessing the characteristics of active ingredients (AIs) of toxic baits for leaf-cutting ants are still scarce, although the need for a delayed action of these compounds on adult workers has been well accepted (mortality <= 15% at 24 h and <= 90% at 21 days). Therefore, we determined the insecticidal action of two AIs used in commercial baits, diflubenzuron and dechlorane, over time in workers, and discussed the control of colonies in relation to the existing literature. Dechlorane presented excellent insecticidal activity with a delayed action at all concentrations tested, although its commercial use has been prohibited due to its organochlorine nature. In contrast, diflubenzuron did not cause significant mortality or symptoms of intoxication, indicating that the successful cases reported with the use of baits containing this AI were in fact due to an accidental contamination with dechlorane. We comment about the ineffectiveness of diflubenzuron on alternative targets, i.e., young forms and the mutualistic fungus, supporting the concept that the AI needs to a have a delayed action on adult workers.

Larval isolation and brood care in Acromyrmex leaf-cutting ants

The larvae of leaf-cutting ants are maintained within the fungus gardens of their colonies and are fed pieces of fungus by the adult workers. However, little else is known about the nature of the worker-larva interaction in these ecologically important ants. To examine whether workers can gauge the needs of individual larvae, we isolated larvae without adult workers for different lengths of time. We then placed workers with the larvae and recorded the type and frequency of the subsequent behaviours of the workers. Workers scraped the mouthparts of larvae, ingested their faecal fluid, fed them with fungal hyphae, transported them around the fungus garden and, most frequently, licked their bodies. The workers were also observed to 'plant' fungal hyphae on the bodies of larvae. Workers interacted more frequently with larvae that had been isolated without workers than with those that had not, but there was no effect of the length of isolation. The results suggest that the interactions are complex, involving a number of behaviours that probably serve different functions, and that workers are to some extent able to assess the individual needs of larvae.

Filamentous fungi found on foundress queens of leaf-cutting ants (Hymenoptera: Formicidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Geographic Distribution and Population Estimate of Leaf-cutting Ants of the Genus Acromyrmex (Hymenoptera: Formicidae) in Southwestern Bahia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Growth of the Symbiotic Fungus of the Grass-cutting Ant Atta capiguara (Hymenoptera: Formicidae): Effect of Grass Extracts

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Selectivity of Workers of the Grass-Cutting Ants Atta bisphaerica and Atta capiguara (Hymenoptera: Formicidae) to Vegetable Oils

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Digging effort in leaf-cutting ant queens (Atta sexdens rubropilosa) and its effects on survival and colony growth during the claustral phase

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nest Digging by Leaf-Cutting Ants: Effect of Group Size and Functional Structures.

Leaf-cutting ant workers dig underground chambers, for housing their symbiotic fungus, interconnected by a vast quantity of tunnels whose function is to permit the entrance of food (leaves), gaseous exchanges, andmovement of workers, offspring, and the queen. Digging is a task executed by a group of workers, but little is known about the group effect and group-constructed functional structures. Thus, we analyzed the structures formed by worker groups (5, 10, 20, and 40 individuals) of the leaf-cutting ant, Atta sexdens rubropilosa, for 2 days of excavation. The digging arena was the same for the 4 groups, with each group corresponding to a different density. Our results verified a pattern of tunneling by the workers, but no chamber was constructed. The group effect is well known, since the 40-worker group dug significantly more than the groups of 5, 10, and 20. These groups did not differ statistically from each other. Analysis of load/worker verified that workers of the smallest group carried the greatest load. Our paper demonstrates the group effect on the digging of nests, namely, that excavation is proportional to group size, but without emergence of a functional structure such as a chamber.

STEM ANATOMY and DEVELOPMENT of SUCCESSIVE CAMBIA IN THE NEOTROPICAL LIANA SECURIDACA RIVINIFOLIA (POLYGALACEAE)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Nested liana-tree network in three distinct neotropical vegetation formations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

An Intelligent System for Petroleum Well Drilling Cutting Analysis

Cutting analysis is a important and crucial task task to detect and prevent problems during the petroleum well drilling process. Several studies have been developed for drilling inspection, but none of them takes care about analysing the generated cutting at the vibrating shale shakers. Here we proposed a system to analyse the cutting's concentration at the vibrating shale shakers, which can indicate problems during the petroleum well drilling process, such that the collapse of the well borehole walls. Cutting's images are acquired and sent to the data analysis module, which has as the main goal to extract features and to classify frames according to one of three previously classes of cutting's volume. A collection of supervised classifiers were applied in order to allow comparisons about their accuracy and efficiency. We used the Optimum-Path Forest (OPF), Artificial Neural Network using Multi layer Perceptrons (ANN-MLP), Support Vector Machines (SVM) and a Bayesian Classifier (BC) for this task. The first one outperformed all the remaining classifiers. Recall that we are also the first to introduce the OPF classifier in this field of knowledge. Very good results show the robustness of the proposed system, which can be also integrated with other commonly system (Mud-Logging) in order to improve the last one's efficiency.

Analysis of the different forms of application and types of cutting fluid used in plunge cylindrical grinding using conventional and superabrasive CBN grinding wheels

The work reported here involved an investigation into the grinding process, one of the last finishing processes carried out on a production line. Although several input parameters are involved in this process, attention today focuses strongly on the form and amount of cutting fluid employed, since these substances may be seriously pernicious to human health and to the environment, and involve high purchasing and maintenance costs when utilized and stored incorrectly. The type and amount of cutting fluid used directly affect some of the main output variables of the grinding process which are analyzed here, such as tangential cutting force, specific grinding energy, acoustic emission, diametrical wear, roughness, residual stress and scanning electron microscopy. To analyze the influence of these variables, an optimised fluid application methodology was developed (involving rounded 5, 4 and 3 turn diameter nozzles and high fluid application pressures) to reduce the amount of fluid used in the grinding process and improve its performance in comparison with the conventional fluid application method (of diffuser nozzles and lower fluid application pressure). To this end, two types of cutting fluid (a 5% synthetic emulsion and neat oil) and two abrasive tools (an aluminium oxide and a superabrasive CBN grinding wheel) were used. The results revealed that, in every situation, the optimised application of cutting fluid significantly improved the efficiency of the process, particularly the combined use of neat oil and CBN grinding wheel. (c) 2005 Elsevier Ltd. All rights reserved.

Evaluation of the thermal damages in inlet engine valves varying the grinding wheels and the cutting fluids

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cutting forces in turning of gray cast iron using silicon nitride based cutting tool

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Nutritional characteristics and in vitro digestibility of silages from different corn cultivars harvested at two cutting heights

Objetivou-se neste estudo avaliar as características nutricionais e a digestibilidade in vitro de silagens de diferentes cultivares de milho colhidas em duas alturas de corte. Foram avaliadas 11 cultivares (Dina 766, Dina 657, Dina 1000, P 3021, P 3041, C 805, C 333, AG 5011, FO 01, Dina co 9621 e BR 205) colhidas 5 cm acima do solo (baixa) e 5 cm abaixo da inserção da primeira espiga (alta). O experimento foi delineado em blocos casualizados (três blocos), arranjados em esquema fatorial 11 × 2. As silagens das plantas colhidas na altura de corte alta apresentaram teor médio de matéria seca significativamente superior às silagens das plantas colhidas na altura de corte baixa. As cultivares FO 01, AG 5011, Dina co 9621 e Dina 766 apresentaram maior teor de proteína bruta, que as cultivares C 805, P 3041 e P 3021, as quais apresentaram os menores teores deste nutriente. A elevação da altura de corte aumentou os coeficientes de digestibilidade verdadeira in vitro da matéria seca e digestibilidade in vitro da matéria seca das silagens avaliadas. O aumento da altura de corte melhorou o valor nutritivo das silagens, diminuindo as concentrações das frações fibrosas e aumentando a digestibilidade in vitro da matéria seca.