269 resultados para Leafy greens


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The present research is focused on the application of hyperspectral images for the supervision of quality deterioration in ready to use leafy spinach during storage (Spinacia oleracea). Two sets of samples of packed leafy spinach were considered: (a) a first set of samples was stored at 20 °C (E-20) in order to accelerate the degradation process, and these samples were measured the day of reception in the laboratory and after 2 days of storage; (b) a second set of samples was kept at 10 °C (E-10), and the measurements were taken throughout storage, beginning the day of reception and repeating the acquisition of Images 3, 6 and 9 days later. Twenty leaves per test were analyzed. Hyperspectral images were acquired with a push-broom CCD camera equipped with a spectrograph VNIR (400–1000 nm). Calibration set of spectra was extracted from E-20 samples, containing three classes of degradation: class A (optimal quality), class B and class C (maximum deterioration). Reference average spectra were defined for each class. Three models, computed on the calibration set, with a decreasing degree of complexity were compared, according to their ability for segregating leaves at different quality stages (fresh, with incipient and non-visible symptoms of degradation, and degraded): spectral angle mapper distance (SAM), partial least squares discriminant analysis models (PLS-DA), and a non linear index (Leafy Vegetable Evolution, LEVE) combining five wavelengths were included among the previously selected by CovSel procedure. In sets E-10 and E-20, artificial images of the membership degree according to the distance of each pixel to the reference classes, were computed assigning each pixel to the closest reference class. The three methods were able to show the degradation of the leaves with storage time.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Con esta tesis ”Desarrollo de una Teoría Uniforme de la Difracción para el Análisis de los Campos Electromagnéticos Dispersados y Superficiales sobre un Cilindro” hemos iniciado una nueva línea de investigación que trata de responder a la siguiente pregunta: ¿cuál es la impedancia de superficie que describe una estructura de conductor eléctrico perfecto (PEC) convexa recubierta por un material no conductor? Este tipo de estudios tienen interés hoy en día porque ayudan a predecir el campo electromagnético incidente, radiado o que se propaga sobre estructuras metálicas y localmente convexas que se encuentran recubiertas de algún material dieléctrico, o sobre estructuras metálicas con pérdidas, como por ejemplo se necesita en determinadas aplicaciones aeroespaciales, marítimas o automovilísticas. Además, desde un punto de vista teórico, la caracterización de la impedancia de superficie de una estructura PEC recubierta o no por un dieléctrico es una generalización de varias soluciones que tratan ambos tipos de problemas por separado. En esta tesis se desarrolla una teoría uniforme de la difracción (UTD) para analizar el problema canónico del campo electromagnético dispersado y superficial en un cilindro circular eléctricamente grande con una condición de contorno de impedancia (IBC) para frecuencias altas. Construir una solución basada en UTD para este problema canónico es crucial en el desarrollo de un método UTD para el caso más general de una superficie arbitrariamente convexa, mediante el uso del principio de localización de los campos electromagnéticos a altas frecuencias. Esta tesis doctoral se ha llevado a cabo a través de una serie de hitos que se enumeran a continuación, enfatizando las contribuciones a las que ha dado lugar. Inicialmente se realiza una revisión en profundidad del estado del arte de los métodos asintóticos con numerosas referencias. As í, cualquier lector novel puede llegar a conocer la historia de la óptica geométrica (GO) y la teoría geométrica de la difracción (GTD), que dieron lugar al desarrollo de la UTD. Después, se investiga ampliamente la UTD y los trabajos más importantes que pueden encontrarse en la literatura. As í, este capítulo, nos coloca en la posición de afirmar que, hasta donde nosotros conocemos, nadie ha intentado antes llevar a cabo una investigación rigurosa sobre la caracterización de la impedancia de superficie de una estructura PEC recubierta por un material dieléctrico, utilizando para ello la UTD. Primero, se desarrolla una UTD para el problema canónico de la dispersión electromagnética de un cilindro circular eléctricamente grande con una IBC uniforme, cuando es iluminado por una onda plana con incidencia oblicua a frecuencias altas. La solución a este problema canónico se construye a partir de una solución exacta mediante una expansión de autofunciones de propagación radial. Entonces, ésta se convierte en una nueva expansión de autofunciones de propagación circunferencial muy apropiada para cilindros grandes, a través de la transformación de Watson. De esta forma, la expresión del campo se reduce a una integral que se evalúa asintóticamente, para altas frecuencias, de manera uniforme. El resultado se expresa según el trazado de rayos descrito en la UTD. La solución es uniforme porque tiene la importante propiedad de mantenerse continua a lo largo de la región de transición, a ambos lados de la superficie del contorno de sombra. Fuera de la región de transición la solución se reduce al campo incidente y reflejado puramente ópticos en la región iluminada del cilindro, y al campo superficial difractado en la región de sombra. Debido a la IBC el campo dispersado contiene una componente contrapolar a causa de un acoplamiento entre las ondas TEz y TMz (donde z es el eje del cilindro). Esta componente contrapolar desaparece cuando la incidencia es normal al cilindro, y también en la región iluminada cuando la incidencia es oblicua donde el campo se reduce a la solución de GO. La solución UTD presenta una muy buena exactitud cuando se compara numéricamente con una solución de referencia exacta. A continuación, se desarrolla una IBC efectiva para el cálculo del campo electromagnético dispersado en un cilindro circular PEC recubierto por un dieléctrico e iluminado por una onda plana incidiendo oblicuamente. Para ello se derivan dos impedancias de superficie en relación directa con las ondas creeping y de superficie TM y TE que se excitan en un cilindro recubierto por un material no conductor. Las impedancias de superficie TM y TE están acopladas cuando la incidencia es oblicua, y dependen de la geometría del problema y de los números de onda. Además, se ha derivado una impedancia de superficie constante, aunque con diferente valor cuando el observador se encuentra en la zona iluminada o en la zona de sombra. Después, se presenta una solución UTD para el cálculo de la dispersión de una onda plana con incidencia oblicua sobre un cilindro eléctricamente grande y convexo, mediante la generalización del problema canónico correspondiente al cilindro circular. La solución asintótica es uniforme porque se mantiene continua a lo largo de la región de transición, en las inmediaciones del contorno de sombra, y se reduce a la solución de rayos ópticos en la zona iluminada y a la contribución de las ondas de superficie dentro de la zona de sombra, lejos de la región de transición. Cuando se usa cualquier material no conductor se excita una componente contrapolar que tiende a desaparecer cuando la incidencia es normal al cilindro y en la región iluminada. Se discuten ampliamente las limitaciones de las fórmulas para la impedancia de superficie efectiva, y se compara la solución UTD con otras soluciones de referencia, donde se observa una muy buena concordancia. Y en tercer lugar, se presenta una aproximación para una impedancia de superficie efectiva para el cálculo de los campos superficiales en un cilindro circular conductor recubierto por un dieléctrico. Se discuten las principales diferencias que existen entre un cilindro PEC recubierto por un dieléctrico desde un punto de vista riguroso y un cilindro con una IBC. Mientras para un cilindro de impedancia se considera una impedancia de superficie constante o uniforme, para un cilindro conductor recubierto por un dieléctrico se derivan dos impedancias de superficie. Estas impedancias de superficie están asociadas a los modos de ondas creeping TM y TE excitadas en un cilindro, y dependen de la posición y de la orientación del observador y de la fuente. Con esto en mente, se deriva una solución UTD con IBC para los campos superficiales teniendo en cuenta las dependencias de la impedancia de superficie. La expansión asintótica se realiza, mediante la transformación de Watson, sobre la representación en serie de las funciones de Green correspondientes, evitando as í calcular las derivadas de orden superior de las integrales de tipo Fock, y dando lugar a una solución rápida y precisa. En los ejemplos numéricos realizados se observa una muy buena precisión cuando el cilindro y la separación entre el observador y la fuente son grandes. Esta solución, junto con el método de los momentos (MoM), se puede aplicar para el cálculo eficiente del acoplamiento mutuo de grandes arrays conformados de antenas de parches. Los métodos propuestos basados en UTD para el cálculo del campo electromagnético dispersado y superficial sobre un cilindro PEC recubierto de dieléctrico con una IBC efectiva suponen un primer paso hacia la generalización de una solución UTD para superficies metálicas convexas arbitrarias cubiertas por un material no conductor e iluminadas por una fuente electromagnética arbitraria. ABSTRACT With this thesis ”Development of a Uniform Theory of Diffraction for Scattered and Surface Electromagnetic Field Analysis on a Cylinder” we have initiated a line of investigation whose goal is to answer the following question: what is the surface impedance which describes a perfect electric conductor (PEC) convex structure covered by a material coating? These studies are of current and future interest for predicting the electromagnetic (EM) fields incident, radiating or propagating on locally smooth convex parts of highly metallic structures with a material coating, or by a lossy metallic surfaces, as for example in aerospace, maritime and automotive applications. Moreover, from a theoretical point of view, the surface impedance characterization of PEC surfaces with or without a material coating represents a generalization of independent solutions for both type of problems. A uniform geometrical theory of diffraction (UTD) is developed in this thesis for analyzing the canonical problem of EM scattered and surface field by an electrically large circular cylinder with an impedance boundary condition (IBC) in the high frequency regime, by means of a surface impedance characterization. The construction of a UTD solution for this canonical problem is crucial for the development of the corresponding UTD solution for the more general case of an arbitrary smooth convex surface, via the principle of the localization of high frequency EM fields. The development of the present doctoral thesis has been carried out through a series of landmarks that are enumerated as follows, emphasizing the main contributions that this work has given rise to. Initially, a profound revision is made in the state of art of asymptotic methods where numerous references are given. Thus, any reader may know the history of geometrical optics (GO) and geometrical theory of diffraction (GTD), which led to the development of UTD. Then, the UTD is deeply investigated and the main studies which are found in the literature are shown. This chapter situates us in the position to state that, as far as we know, nobody has attempted before to perform a rigorous research about the surface impedance characterization for material-coated PEC convex structures via UTD. First, a UTD solution is developed for the canonical problem of the EM scattering by an electrically large circular cylinder with a uniform IBC, when it is illuminated by an obliquely incident high frequency plane wave. A solution to this canonical problem is first constructed in terms of an exact formulation involving a radially propagating eigenfunction expansion. The latter is converted into a circumferentially propagating eigenfunction expansion suited for large cylinders, via the Watson transformation, which is expressed as an integral that is subsequently evaluated asymptotically, for high frequencies, in a uniform manner. The resulting solution is then expressed in the desired UTD ray form. This solution is uniform in the sense that it has the important property that it remains continuous across the transition region on either side of the surface shadow boundary. Outside the shadow boundary transition region it recovers the purely ray optical incident and reflected ray fields on the deep lit side of the shadow boundary and to the modal surface diffracted ray fields on the deep shadow side. The scattered field is seen to have a cross-polarized component due to the coupling between the TEz and TMz waves (where z is the cylinder axis) resulting from the IBC. Such cross-polarization vanishes for normal incidence on the cylinder, and also in the deep lit region for oblique incidence where it properly reduces to the GO or ray optical solution. This UTD solution is shown to be very accurate by a numerical comparison with an exact reference solution. Then, an effective IBC is developed for the EM scattered field on a coated PEC circular cylinder illuminated by an obliquely incident plane wave. Two surface impedances are derived in a direct relation with the TM and TE surface and creeping wave modes excited on a coated cylinder. The TM and TE surface impedances are coupled at oblique incidence, and depend on the geometry of the problem and the wave numbers. Nevertheless, a constant surface impedance is found, although with a different value when the observation point lays in the lit or in the shadow region. Then, a UTD solution for the scattering of an obliquely incident plane wave on an electrically large smooth convex coated PEC cylinder is introduced, via a generalization of the canonical circular cylinder problem. The asymptotic solution is uniform because it remains continuous across the transition region, in the vicinity of the shadow boundary, and it recovers the ray optical solution in the deep lit region and the creeping wave formulation within the deep shadow region. When a coating is present a cross-polar field term is excited, which vanishes at normal incidence and in the deep lit region. The limitations of the effective surface impedance formulas are discussed, and the UTD solution is compared with some reference solutions where a very good agreement is met. And in third place, an effective surface impedance approach is introduced for determining surface fields on an electrically large coated metallic circular cylinder. Differences in analysis of rigorouslytreated coated metallic cylinders and cylinders with an IBC are discussed. While for the impedance cylinder case a single constant or uniform surface impedance is considered, for the coated metallic cylinder case two surface impedances are derived. These are associated with the TM and TE creeping wave modes excited on a cylinder and depend on observation and source positions and orientations. With this in mind, a UTD based method with IBC is derived for the surface fields by taking into account the surface impedance variation. The asymptotic expansion is performed, via the Watson transformation, over the appropriate series representation of the Green’s functions, thus avoiding higher-order derivatives of Fock-type integrals, and yielding a fast and an accurate solution. Numerical examples reveal a very good accuracy for large cylinders when the separation between the observation and the source point is large. Thus, this solution could be efficiently applied in mutual coupling analysis, along with the method of moments (MoM), of large conformal microstrip array antennas. The proposed UTD methods for scattered and surface EM field analysis on a coated PEC cylinder with an effective IBC are considered the first steps toward the generalization of a UTD solution for large arbitrarily convex smooth metallic surfaces covered by a material coating and illuminated by an arbitrary EM source.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

El diseño de una antena reflectarray bajo la aproximación de periodicidad local requiere la determinación de la matriz de scattering de estructuras multicapa con metalizaciones periódicas para un gran número de geometrías diferentes. Por lo tanto, a la hora de diseñar antenas reflectarray en tiempos de CPU razonables, se necesitan herramientas númericas rápidas y precisas para el análisis de las estructuras periódicas multicapa. En esta tesis se aplica la versión Galerkin del Método de los Momentos (MDM) en el dominio espectral al análisis de las estructuras periódicas multicapa necesarias para el diseño de antenas reflectarray basadas en parches apilados o en dipolos paralelos coplanares. Desgraciadamente, la aplicación de este método numérico involucra el cálculo de series dobles infinitas, y mientras que algunas series convergen muy rápidamente, otras lo hacen muy lentamente. Para aliviar este problema, en esta tesis se propone un novedoso MDM espectral-espacial para el análisis de las estructuras periódicas multicapa, en el cual las series rápidamente convergente se calculan en el dominio espectral, y las series lentamente convergentes se calculan en el dominio espacial mediante una versión mejorada de la formulación de ecuaciones integrales de potenciales mixtos (EIPM) del MDM. Esta versión mejorada se basa en la interpolación eficiente de las funciones de Green multicapa periódicas, y en el cálculo eficiente de las integrales singulares que conducen a los elementos de la matriz del MDM. El novedoso método híbrido espectral-espacial y el tradicional MDM en el dominio espectral se han comparado en el caso de los elementos reflectarray basado en parches apilados. Las simulaciones numéricas han demostrado que el tiempo de CPU requerido por el MDM híbrido es alrededor de unas 60 veces más rápido que el requerido por el tradicional MDM en el dominio espectral para una precisión de dos cifras significativas. El uso combinado de elementos reflectarray con parches apilados y técnicas de optimización de banda ancha ha hecho posible diseñar antenas reflectarray de transmisiónrecepción (Tx-Rx) y polarización dual para aplicaciones de espacio con requisitos muy restrictivos. Desgraciadamente, el nivel de aislamiento entre las polarizaciones ortogonales en antenas DBS (típicamente 30 dB) es demasiado exigente para ser conseguido con las antenas basadas en parches apilados. Además, el uso de elementos reflectarray con parches apilados conlleva procesos de fabricación complejos y costosos. En esta tesis se investigan varias configuraciones de elementos reflectarray basadas en conjuntos de dipolos paralelos con el fin de superar los inconvenientes que presenta el elemento basado en parches apilados. Primeramente, se propone un elemento consistente en dos conjuntos apilados ortogonales de tres dipolos paralelos para aplicaciones de polarización dual. Se ha diseñado, fabricado y medido una antena basada en este elemento, y los resultados obtenidos para la antena indican que tiene unas altas prestaciones en términos de ancho de banda, pérdidas, eficiencia y discriminación contrapolar, además de requerir un proceso de fabricación mucho más sencillo que el de las antenas basadas en tres parches apilados. Desgraciadamente, el elemento basado en dos conjuntos ortogonales de tres dipolos paralelos no proporciona suficientes grados de libertad para diseñar antenas reflectarray de transmisión-recepción (Tx-Rx) de polarización dual para aplicaciones de espacio por medio de técnicas de optimización de banda ancha. Por este motivo, en la tesis se propone un nuevo elemento reflectarray que proporciona los grados de libertad suficientes para cada polarización. El nuevo elemento consiste en dos conjuntos ortogonales de cuatro dipolos paralelos. Cada conjunto contiene tres dipolos coplanares y un dipolo apilado. Para poder acomodar los dos conjuntos de dipolos en una sola celda de la antena reflectarray, el conjunto de dipolos de una polarización está desplazado medio período con respecto al conjunto de dipolos de la otra polarización. Este hecho permite usar solamente dos niveles de metalización para cada elemento de la antena, lo cual simplifica el proceso de fabricación como en el caso del elemento basados en dos conjuntos de tres dipolos paralelos coplanares. Una antena de doble polarización y doble banda (Tx-Rx) basada en el nuevo elemento ha sido diseñada, fabricada y medida. La antena muestra muy buenas presentaciones en las dos bandas de frecuencia con muy bajos niveles de polarización cruzada. Simulaciones numéricas presentadas en la tesis muestran que estos bajos de niveles de polarización cruzada se pueden reducir todavía más si se llevan a cabo pequeñas rotaciones de los dos conjuntos de dipolos asociados a cada polarización. ABSTRACT The design of a reflectarray antenna under the local periodicity assumption requires the determination of the scattering matrix of a multilayered structure with periodic metallizations for quite a large number of different geometries. Therefore, in order to design reflectarray antennas within reasonable CPU times, fast and accurate numerical tools for the analysis of the periodic multilayered structures are required. In this thesis the Galerkin’s version of the Method of Moments (MoM) in the spectral domain is applied to the analysis of the periodic multilayered structures involved in the design of reflectarray antennas made of either stacked patches or coplanar parallel dipoles. Unfortunately, this numerical approach involves the computation of double infinite summations, and whereas some of these summations converge very fast, some others converge very slowly. In order to alleviate this problem, in the thesis a novel hybrid MoM spectral-spatial domain approach is proposed for the analysis of the periodic multilayered structures. In the novel approach, whereas the fast convergent summations are computed in the spectral domain, the slowly convergent summations are computed by means of an enhanced Mixed Potential Integral Equation (MPIE) formulation of the MoM in the spatial domain. This enhanced formulation is based on the efficient interpolation of the multilayered periodic Green’s functions, and on the efficient computation of the singular integrals leading to the MoM matrix entries. The novel hybrid spectral-spatial MoM code and the standard spectral domain MoM code have both been compared in the case of reflectarray elements based on multilayered stacked patches. Numerical simulations have shown that the CPU time required by the hybrid MoM is around 60 times smaller than that required by the standard spectral MoM for an accuracy of two significant figures. The combined use of reflectarray elements based on stacked patches and wideband optimization techniques has made it possible to design dual polarization transmit-receive (Tx-Rx) reflectarrays for space applications with stringent requirements. Unfortunately, the required level of isolation between orthogonal polarizations in DBS antennas (typically 30 dB) is hard to achieve with the configuration of stacked patches. Moreover, the use of reflectarrays based on stacked patches leads to a complex and expensive manufacturing process. In this thesis, we investigate several configurations of reflectarray elements based on sets of parallel dipoles that try to overcome the drawbacks introduced by the element based on stacked patches. First, an element based on two stacked orthogonal sets of three coplanar parallel dipoles is proposed for dual polarization applications. An antenna made of this element has been designed, manufactured and measured, and the results obtained show that the antenna presents a high performance in terms of bandwidth, losses, efficiency and cross-polarization discrimination, while the manufacturing process is cheaper and simpler than that of the antennas made of stacked patches. Unfortunately, the element based on two sets of three coplanar parallel dipoles does not provide enough degrees of freedom to design dual-polarization transmit-receive (Tx-Rx) reflectarray antennas for space applications by means of wideband optimization techniques. For this reason, in the thesis a new reflectarray element is proposed which does provide enough degrees of freedom for each polarization. This new element consists of two orthogonal sets of four parallel dipoles, each set containing three coplanar dipoles and one stacked dipole. In order to accommodate the two sets of dipoles in each reflectarray cell, the set of dipoles for one polarization is shifted half a period from the set of dipoles for the other polarization. This also makes it possible to use only two levels of metallization for the reflectarray element, which simplifies the manufacturing process as in the case of the reflectarray element based on two sets of three parallel dipoles. A dual polarization dual-band (Tx-Rx) reflectarray antenna based on the new element has been designed, manufactured and measured. The antenna shows a very good performance in both Tx and Rx frequency bands with very low levels of cross-polarization. Numerical simulations carried out in the thesis have shown that the low levels of cross-polarization can be even made smaller by means of small rotations of the two sets of dipoles associated to each polarization.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

FLORICAULA (FLO) of Antirrhinum and LEAFY (FLY) of Arabidopsis regulate the formation of floral meristems. To examine whether same mechanisms control floral development in distantly related species such as grasses, we isolated RFL, FLO-LFY homolog of rice, and examined its expression and function. Northern analysis showed that RFL is expressed predominantly in very young panicle but not in mature florets, mature leaves, or roots. In situ hybridization revealed that RFL RNA was expressed in epidermal cells in young leaves at vegetative growth stage. After the transition to reproductive stage, RFL RNA was detected in all layers of very young panicle including the apical meristem, but absent in the incipient primary branches. As development of branches proceeds, RFL RNA accumulation localized in the developing branches except for the apical meristems of the branches and secondary branch primordia. Expression pattern of RFL raised a possibility that, unlike FLO and LFY, RFL might be involved in panicle branching. Transgenic Arabidopsis plants constitutively expressing RFL from the cauliflower mosaic virus 35S promoter were produced to test whether 35S-RFL would cause similar phenotype as observed in 35S-LFY plants. In 35S-RFL plants, transformation of inflorescence meristem to floral meristem was rarely observed. Instead, development of cotyledons, rosette leaves, petals, and stamens was severely affected, demonstrating that RFL function is distinct from that of LFY. Our results suggest that mechanisms controlling floral development in rice might be diverged from that of Arabidopsis and Antirrhinum.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Introdução: Estudos recentes têm mostrado que as quedas são a causa externa de morte mais importante entre idosos, podendo levar a hospitalização, lesões, dependência e aumento nos custos dos serviços sociais e de saúde. O comprometimento da mobilidade funcional é um importante fator de risco para quedas, mas aspectos sociais, ambientais e comportamentais também podem influenciar nesse evento. Objetivo: Identificar os aspectos socioeconômicos e contextuais associados com a mobilidade funcional e quedas em idosos residentes no município de São Paulo. Métodos: Foram utilizados os dados do Estudo Saúde, Bem-Estar e Envelhecimento (SABE), uma amostra representativa para os indivíduos com idade igual ou superior a 60 anos do município de São Paulo, em 2010. As variáveis dependentes do estudo foram a ocorrência de alguma queda no último ano e o comprometimento da mobilidade funcional, mensurada pelo teste Timed Up and Go (TUG). Fatores individuais (estado marital, raça/cor, anos de estudo e percepção de suficiência de renda) e contextuais (Índice de Gini, área verde/ habitante, taxa de homicídio e percentual de domicílios em favelas) foram analisados por modelos logísticos multiníveis. Resultados: De 1.190 idosos inclusos, 29 por cento relataram ter caído no último ano e 46 por cento apresentaram comprometimento da mobilidade funcional. Os fatores individuais socioeconômicos não apresentaram associação com a ocorrência de queda, mas ter 8 anos ou mais de anos de estudo foi um fator protetor para comprometimento da mobilidade em todos os modelos testados (OR: 0,56). Morar em subprefeituras com taxa de homicídio moderada apresentou associação com chance aumentada de cair (OR: 1.51, 95 por cento IC: 1.09-2.07). Moderada área verde se associou com maior chance de cair entre os indivíduos com 80 anos e mais (OR:2,63, 95 por cento IC: 1.23-5.60). Conclusão: Os resultados estão de acordo com a literatura em relação à associação das características do bairro de residência com quedas e mobilidade funcional em idosos. Estratégias voltadas para prevenção de quedas e de dificuldade na mobilidade funcional devem considerar aspectos sociais e ambientais de locais públicos. Este estudo foi financiado pela Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) (nº processo: 2014/06721-4)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objetivo: Describir los hábitos alimenticios de una comunidad universitaria. Material y métodos: Se llevó a cabo un estudio descriptivo transversal. El instrumento utilizado fue un cuestionario de frecuencias de consumo, administrado por entrevista personal a una muestra accidental de 147 personas. Constaba de cuatro secciones: 1) número de comidas y lugar donde se realizan, 2) patrones de consumo de los distintos grupos de alimentos, 3) modos de preparación de los alimentos, 4) datos de identificación y demográficos. Resultados: En comparación con el patrón de Vivanco y Palacios, nuestra muestra se caracteriza por: alto consumo de carnes (4 veces/semana), disminución del consumo de huevos (2v/sem.), incremento del consumo de hidratos de carbono complejos (5v/sem.), consumo ligeramente inferior de frutas (5v/sem.), ingesta insuficiente de verduras (4v/sem), legumbres (2v/sem) y pescados (2,5v/sem). Conclusiones y Recomendaciones: Atendiendo a los estudios referenciados, es conveniente disminuir el consumo de carnes, aumentando los aportes de pescados, verduras, hortalizas y legumbres, alimentos que, habiendo sido habituales en nuestra dieta mediterránea, parecen haber sido abandonados en beneficio de la conformación de una dieta que tiende a la homogeneización cultural.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In the present work, a three-dimensional (3D) formulation based on the method of fundamental solutions (MFS) is applied to the study of acoustic horns. The implemented model follows and extends previous works that only considered two-dimensional and axisymmetric horn configurations. The more realistic case of 3D acoustic horns with symmetry regarding two orthogonal planes is addressed. The use of the domain decomposition technique with two interconnected sub-regions along a continuity boundary is proposed, allowing for the computation of the sound pressure generated by an acoustic horn installed on a rigid screen. In order to reduce the model discretization requirements for these cases, Green’s functions derived with the image source methodology are adopted, automatically accounting for the presence of symmetry conditions. A strategy for the calculation of an optimal position of the virtual sources used by the MFS to define the solution is also used, leading to improved reliability and flexibility of the proposed method. The responses obtained by the developed model are compared to reference solutions, computed by well-established models based on the boundary element method. Additionally, numerically calculated acoustic parameters, such as directivity and beamwidth, are compared with those evaluated experimentally.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This layer is a georeferenced raster image of the historic paper map entitled: New Hampshire by recent survey : made under the supreme authority and published according to law by Philip Carrigain ; J.J. Barralet, del. ; W. Harrison, sct., Philada. It was published by Philip Carrigain in 1816. Scale [ca. 1:200,000]. This layer is image 5 of 6 total images, representing the center west portion of the six sheet source map. The image inside the map neatline is georeferenced to the surface of the earth and fit to the New Hampshire State Plane coordinate system (NAD 1983 in Feet) (Fipszone 2800). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, drainage, public buildings, schools, churches, industry locations (e.g. mills, factories, mines, etc.), selected private buildings with names of property owners, town boundaries, land grants, and more. Relief shown pictorially and by hachures. Includes area notes, text, and table of population. Also includes illustrations: View of the Great Boars Head and Hampton Beach -- The Cap of the White Mountains -- View of the White Mountains from Shelburne; inset maps: States of the Union east of the Hudson with the adjacent British colonies. Scale [ca. 1:1,920,000] -- The middle, southern and western sections of the United States with the territories. Scale [ca. 1:4,900,000]. Includes: ms. additions with updated county boundary & township names.This layer is part of a selection of digitally scanned and georeferenced historic maps of New England from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates, scales, and map purposes.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The political balance in Sweden was upset in this year’s elections to the European Parliament (EP). The far-right ‘Sweden Democrats’ almost tripled their vote-share and the Greens gained enough votes to become the second-largest Swedish party in the EP after the Social Democrats. Support for the current government incumbents, the Moderates, fell beyond expectation. The party will not recover in time for the national elections in September, whereas both the Greens and the Sweden Democrats are likely to repeat their EP election success. Since the Sweden Democrats are unlikely to form part of the coalition government – the election-winners will be the Greens and Social Democrats – Sweden’s political landscape is set to undergo a shift to the left.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Immigration and freedom of movement of EU citizens are among the main issues debated throughout the European Parliament election campaign and have some potential in determining who tomorrow’s EU leaders will be. This Policy Brief looks at how the two policies are debated at national level – in France, Germany and the UK – and at EU level between the ‘top candidates’ for European Commission Presidency – Jean-Claude Juncker (EPP), Ska Keller (Greens), Martin Schulz (PES) and Guy Verhofstadt (ALDE) – who have participated in several public debates. Two different campaigns have been unfolding in front of EU citizens’ eyes. The tense debate that can be identified at national level on these issues, is not transferred to the EU level, where immigration and free movement are less controversial topics. Furthermore, although participating in European elections, national parties present agendas responding exclusively to the economic and social challenges of their Member State, while the candidates for the Commission Presidency bring forward ‘more European’ programmes. Hence, several aspects need to be reflected upon: What will the consequences of this discontinuity be? How will this impact the future European agenda in terms of immigration and free movement? What institutional consequences will there be? Answering these questions is not a simple task, however, this paper aims to identify the parameters that need to be taken into account and the political landscape which will determine the future EU agenda in terms of immigration and free movement.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The political campaign before Germany’s parliamentary elections to be held on 22 September has in all its glory reflected the trends visible during the last four years of the government of Chancellor Angela Merkel – the strength of the Christian Democrats, the weakness of the opposition and the increasing marginalisation of the coalition partner, the FDP. The CDU/CSU remains the most popular political choice in Germany, largely because Angela Merkel has consistently remained the most popular German politician. Everything indicates that the CDU/CSU will win the election, even though it has been running a passive campaign and the Chancellor herself has been avoiding confrontation, presenting herself as a kind of cross-party representative of the interests of all social groups. The Christian Democrats’ main competitors, the Social Democrats, have been unable to play to their strengths and present themselves as a serious alternative to the CDU/CSU. The Christian Democrats, despite their difficult cooperation with the liberal FDP, have declared their willingness to continue doing so during the next parliamentary term. If the numbers make that impossible, and the Social Democrats and the Greens have too few votes to be able to form a government, a grand coalition of the Christian Democrats and the SPD will be formed in Germany.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The results of parliamentary elections in seven German federal states, ongoing since early 2011, show the collapse of the existing order on the German political scene, both on a national level and on the level of the individual federal states. So far, the federal states have been governed by one of the catch-all parties1 – i.e. the Christian Democrats or Social Democrats – in coalitions with smaller partners – the FDP and the Greens, respectively2. This year’s elections have fully revealed the extent of social transformation in Germany and its impact on voting preferences and the hitherto stable party system in this country. The largest and most popular parties so far – the CDU and the SPD – are losing the voters’ confidence and support, whereas the parties associated with protest movements (such as the Greens) are gaining prominence. Moreover, the German political scene is undergoing increasing fragmentation, as new small, local groups are appearing who have no political aspirations at the federal level but who are attractive to voters acting as successful groups of common cause. The changes in the existing balance of power on the German political scene are being sped up by the specific features of the federal system. Elections to the parliaments of the federal states are held at regular intervals which increasingly affects policies on the national level. The key decisions that concern domestic and foreign affairs are made under the pressure of constant election campaigns.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

On June 15, 2014, Jean-Claude Juncker, the lead candidate of the European People’s Party, was elected President of the European Commission, with the support of the Alliance of Liberals and Democrats for Europe, and some of the European Socialists and Greens. Amid unprecedented Euroscepticism, the media and many pundits predicted a record-low voter turnout and record-high results for Europhobic parties. The aforementioned parties then decided that the political outcome of these 2014 European elections would also be unprecedented. For the first time in EU history, the European political parties agreed to nominate candidates to chair the institution, which they justified by putting forward Article 17 of the Lisbon Treaty. The European Parliament has often characteristically used political discourse - the logos, to influence the EU’s institutional framework, even though it entails grappling with Member States. It took the form of reports and resolutions, like the official use of the phrase “European Parliament” in 1962, direct universal suffrage elections in 1975 and a European Union in 1984. Nominating contenders to chair the European Commission is no exception. It requires a specific political discourse whose origins can be traced back to the early years of the European Parliament, when it was still the “Common Assembly”. This political discourse is one of the elements thanks to which the European Parliament acquired visibility and new prerogatives, in pursuit of its legitimacy. However, the executive branch in all member states is not intent on yielding such prerogatives to the European Parliament. As a matter of fact, the European Parliament has often ended up strengthening the heads of state and governments, since MEPs are forced to resort to self-discipline. The symbolic significance of its logos and, consequently, its own politicisation as a source of legitimacy, is thus undermined. For instance, in 2014, Jean-Claude Juncker’s election actually strengthened German Chancellor Angela Merkel. First she questioned the fact that the candidate whose party holds the parliamentary majority after the election should be appointed President of the Commission. Then she seemed strongly intent on democratising the Union, when she confronted David Cameron, who openly opposed Juncker, believed to be too federalist and old-fashioned a candidate. By doing so, she eventually reduced the symbolic dimension of the European Parliament’s initiative, and Juncker’s election. She also unquestionably embodied EU leadership. This paper aims at analysing Juncker’s election to the Presidency of the European Commission, as well as other questions it raises. In the first part, I lay out some thoughts about the sociohistorical context of voting in European elections in order to make the readers understand why the European Parliament should be bolder. Secondly, I try to explain how the European Parliament has used the logos as a weapon to grapple with member states for more power, as was the case during the 2014 European elections. Last but not least, I seek to show how Angela Merkel got hold of that weapon and took advantage of it, thus proving that despite MEPs’ best efforts, Juncker’s task will be all the more complicated as he was not the consensual candidate of all the governments.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

After a passionate two-day election, Alexander Van Der Bellen (supported by the Greens) narrowly defeated his far-right wing opponent, Norbert Hofer (Freedom Party of Austria or FPÖ), thereby becoming Austria’s new President (50.3% vs 49.7%). Notably, the ecologist candidate only managed to win thanks to the postal votes counted on the day after the polls closed, whereas anti-EU Hofer was still leading by some 144,000 votes on the previous evening. Such a narrow defeat is likely to have long-term implications for Austrian and European politics.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Culinary herbs are herbaceous (leafy) plants that add flavour and colour to all types of meals. There is a wide variety of herbs that are used for culinary purposes worldwide, which are also recognized for their beneficial health effects, and thus have also been used in folk medicine. Besides their nutritional value herbs are rich in many phytochemical components with bioactive effects, thus improving human health. The aim of the present work was to make a general overview of some of these herbs, including their gastronomic usage, their chemical composition in bioactive components and their reported health effects. This work showed that the health effects are very diverse and differ according to the herb in question. However, some of the most frequently citted biological activities include antioxidant, antimicrobial, and antiviral effects.