Knowledge and attitudes of health care workers from intensive care units regarding nosocomial transmission of influenza: a study on the immediate pre-pandemic period

The transmission of influenza in health care settings is a major threat to patients, especially those with severe diseases. The attitude of health care workers (HCWs) may influence the transmission of countless infections. The current study aimed to quantify knowledge and identify attitudes of HCWs involved in intensive care units (ICUs) regarding the risk of nosocomial influenza transmission. A questionnaire was applied through interviews to HCWs who worked in one of the five ICUs from a teaching hospital. Questions about influenza were deliberately dispersed among others that assessed several infectious agents. Forty-two HCWs were interviewed: nine physicians, ten nurses and 23 nursing technicians or auxiliaries. Among the 42 HCWs, 98% were aware of the potential transmission of influenza virus in the ICUs, but only 31% would indicate droplet precautions for patients with suspected infection. Moreover, only 31% of them had been vaccinated against influenza in the last campaign (2008). Nursing technicians or auxiliaries were more likely to have been vaccinated, both by univariate and multivariable analysis. When asked about absenteeism, only 10% of the study subjects stated that they would not go to work if they had an influenza-like illness. Those findings suggest that, in non-pandemic periods, influenza control in hospitals requires strategies that combine continuous education with changes in organizational culture.

Knowledge extraction using visualization of hemoglobin parameters to identify thalassemia

The analysis of large amounts of data is better performed by humans when represented in a graphical format. Therefore, a new research area called the Visual Data Mining is being developed endeavoring to use the number crunching power of computers to prepare data for visualization, allied to the ability of humans to interpret data presented graphically.This work presents the results of applying a visual data mining tool, called FastMapDB to detect the behavioral pattern exhibited by a dataset of clinical information about hemoglobinopathies known as thalassemia. FastMapDB is a visual data mining tool that get tabular data stored in a relational database such as dates, numbers and texts, and by considering them as points in a multidimensional space, maps them to a three-dimensional space. The intuitive three-dimensional representation of objects enables a data analyst to see the behavior of the characteristics from abnormal forms of hemoglobin, highlighting the differences when compared to data from a group without alteration.

Evaluation of knowledge and experience of dentists of São Paulo State, Brazil about cardiopulmonary resuscitation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Breastfeeding knowledge and practice of health professionals in public health care services

Objetivou-se avaliar conhecimentos e práticas sobre aleitamento materno de profissionais que atendem lactentes em unidades de atenção básica, ou maternidades públicas, de município do interior paulista, Brasil. É estudo epidemiológico, sendo a população composta por 89 enfermeiros e médicos. Suas respostas a um questionário estruturado foram analisadas no total e segundo o local de trabalho, aplicando-se o teste de diferença de proporções (qui-quadrado), considerando-se p<0,05 como nível crítico. Como parâmetros de acertos foram consideradas as recomendações do Ministério da Saúde. As diferenças significativas para conhecimentos e práticas, segundo o local de trabalho, foram restritas a alguns aspectos, com resultados discretamente melhores dos escores médios de acertos dos profissionais das unidades de atenção básica. Independente do local de trabalho, verificou-se desempenho regular e ruim em diferentes aspectos estudados, indicando que possíveis intervenções para a capacitação nessa temática deverão incluir profissionais de todos os níveis de atenção à saúde.

Knowledge on dental trauma and orthodontic tooth movement held by a group of orthodontists

The objective of this work was to assess the knowledge about orthodontic tooth movement and dental trauma held by a group of orthodontists in specific areas of Brazil. For this purpose, 166 questionnaires with 15 objective questions about this subject were distributed. One hundred and five questionnaires were properly filled and collected after 30 days. It was concluded that, except for avulsion, the knowledge on dental injuries held by the professionals interviewed was considered unsatisfactory, and about 40% of them were not acquainted with the recommendations for the orthodontic movement of traumatized teeth.

An aproach for implementing knowledge management in small and medium companies in Brazil: A case study

The search for competitive advantage in a global environment must consider the use of tacit and explicit knowledge circulating inside companies. Differential factors can be easily replicated nowadays. Due to the great volume of knowledge and information, it is necessary to create a system that allows the management of important knowledge. Existing models for Knowledge Management are based on the reality at large companies. In Brazil, most of the companies are smaller ones. This work presents a simplified model to implement Knowledge Management in Small and Medium Companies in Brazil, based on a unique case study with limited scope. Despite some human and financial restrictions, Knowledge Management can help smaller companies, preserving organizational memory and increasing process efficiency. Observing a unique case prevented any generalization of the model. But the recommendations can be references to other companies, because projects like this must address the specific issues of each organization. The objective of this study is to introduce a simplified model for planning Knowledge Management at small companies in Brazil, considering their restrictions and also seeking to create a competitive advantage. Human aspects are very important in Knowledge Management, but that is not the focus of this study. The model was conceived presuming the participation of all people involved.

Engaging environments: Tacit knowledge sharing on the shop floor

Purpose: The purpose of this paper is to identify factors that facilitate tacit knowledge sharing in unstructured work environments, such as those found in automated production lines. Design/methodology/approach: The study is based on a qualitative approach, and it draws data from a four-month field study at a blown-molded glass factory. Data collection techniques included interviews, informal conversations and on-site observations, and data were interpreted using content analysis. Findings: The results indicated that sharing of tacit knowledge is facilitated by an engaging environment. An engaging environment is supported by shared language and knowledge, which are developed through intense communication and a strong sense of collegiality and a social climate that is dominated by openness and trust. Other factors that contribute to the creation of an engaging environment include managerial efforts to provide appropriate work conditions and to communicate company goals, and HRM practices such as the provision of formal training, on-the-job training and incentives. Practical implications: This paper clarifies the scope of managerial actions that impact knowledge creation and sharing among blue-collar workers. Originality/value: Despite the acknowledgement of the importance of blue-collar workers' knowledge, both the knowledge management and operations management literatures have devoted limited attention to it. Studies related to knowledge management in unstructured working environments are also not abundant. © Emerald Group Publishing Limited.

Surveys on time use and unpaid work in Latin America and the Caribbean: Experience to date and challenges for the future

Incluye bibliografía.

Report on the implementation of the ECLAC work programme subregional activities for the Caribbean 2006-2007 biennium [Covering the period 1 Janurary 2006- 31 December 2007]

The focus of the activities of the Economic Commission for Latin America and the Caribbean/Caribbean Development and Cooperation Committee (ECLAC/CDCC) secretariat during the 2006-2007 biennium continued to be on assistance to member governments of the subregion with policy-making and development strategies, especially on issues relevant to the promotion of the economic, social, and environmental dimensions of development in the Caribbean. The Subregional Headquarters for the Caribbean worked closely with member countries of the CDCC in an effort to ensure the relevance of outputs which would inform policy options. This involved the strengthening of partnerships with both regional and subregional institutions and relevant agencies of the United Nations system working in the Caribbean. A major decision was taken to refocus the operational aspects of the secretariat to ensure that they were relevant to the development goals of its members. This involved the introduction of a thematic approach to the work of the office. One of the changes resulting from this was the restructuring and renaming of the Caribbean Documentation Centre. The Caribbean Knowledge Management Centre (CKMC), as it is now known, has changed its emphasis from organizing and disseminating documents, and is now a more proactive partner in the research undertaken by staff and other users of the service. The CKMC manages the ECLAC website, the public face of the organization. Newsletters and all other documents, including Information and Communications Technology (ICT) profiles of selected countries, prepared by the secretariat, are now available online at the ECLAC/CDCC website www.eclacpos.org . The Caribbean Knowledge Management Portal was launched at a meeting of information specialists in St. Vincent and the Grenadines in 2007. In addition to reaching a wider public, this measure was introduced as a means of reducing the cost of printing or disseminating publications. In spite of the unusually high vacancy rate, at both the international and local levels, during the biennium, the subregional headquarters accomplished 98 per cent of the 119 outputs earmarked for the period. Using vacant positions to carry out the assignments was not an easy task, given the complexity in recruiting qualified and experienced persons for short periods. Nevertheless, consultancy services and short-term replacement staff greatly aided the delivery of these outputs. All the same, 35 work months remained unused during the biennium, leaving 301 work months to complete the outputs. In addition to the unoccupied positions, the work of the subprogramme was severely affected by the rising cost of regional and subregional travel which limited the ability of staff to network and interact with colleagues of member countries. This also hampered the outreach programme carried out mainly through ad hoc expert group meetings. In spite of these shortcomings, the period proved to be successful for the subprogramme as it engaged the attention of member countries in its work either through direct or indirect participation. Staff members completed 36 technical papers plus the reports of the meetings and workshops. A total of 523 persons, representing member countries, participated in the 18 intergovernmental and expert meetings convened by the secretariat in the 24-month period. In its effort to build technical capacity, the subprogramme convened 15 workshops/seminars which offered training for 446 persons.

Ethnoveterinary knowledge of the inhabitants of Marajó Island, Eastern Amazonia, Brazil

Em várias partes do mundo existem relatos etnoveterinários sobre a utilização de plantas em protocolos terapêuticos, entretanto não existem informações disponíveis sobre a etnoveterinária praticada na Amazônia brasileira. Desta forma, objetivou-se documentar o conhecimento etnoveterinário de habitantes da Ilha do Marajó, Amazônia Oriental. Foram realizadas 50 entrevistas individuais com aplicação de questionários semi-estruturados que foram analisados quantitativamente através de estatística descritiva utilizando freqüência de distribuição. O valor de uso foi calculado para determinar as espécies mais importantes. Amostras de plantas com relatos de uso medicinal foram coletadas e identificadas botanicamente. Cinqüenta plantas, distribuídas em 48 gêneros e 34 famílias, foram indicadas para 21 diferentes usos medicinais. A família Asteraceae foi a que teve maior número de espécies citadas e Carapa guianensis Aubl, Crescentia cujete L., Copaifera martii Hayne, Caesalpinia ferrea Mart., Chenopodium ambrosioides L., Jatropha curcas L. e Momordica charantia L. foram as espécies com maiores valor de uso. As partes das plantas mais utilizadas para preparo dos medicamentos etnoveterinários foram folhas (56%), cascas (18%), raizes (14%), sementes (14%) e frutos (8%). Quanto à forma de uso o chá foi citado por 56% dos entrevistados e a maioria das preparações (90,9%) utiliza uma só planta. Além das plantas medicinais, os entrevistados relataram o uso de produtos de origem animal e mineral. Esse trabalho contribui para realização de um inventário das plantas utilizadas na etnoveterinária marajoara que pode servir de base de dados para futuros estudos de validação científica.

Confinement effects and why carbon nanotube bundles can work as gas sensors

Carbon nanotubes have been at the forefront of nanotechnology, leading not only to a better understanding of the basic properties of charge transport in one dimensional materials, but also to the perspective of a variety of possible applications, including highly sensitive sensors. Practical issues, however, have led to the use of bundles of nanotubes in devices, instead of isolated single nanotubes. From a theoretical perspective, the understanding of charge transport in such bundles, and how it is affected by the adsorption of molecules, has been very limited, one of the reasons being the sheer size of the calculations. A frequent option has been the extrapolation of knowledge gained from single tubes to the properties of bundles. In the present work we show that such procedure is not correct, and that there are qualitative differences in the effects caused by molecules on the charge transport in bundles versus isolated nanotubes. Using a combination of density functional theory and recursive Green's function techniques we show that the adsorption of molecules randomly distributed onto the walls of carbon nanotube bundles leads to changes in the charge density and consequently to significant alterations in the conductance even in pristine tubes. We show that this effect is driven by confinement which is not present in isolated nanotubes. Furthermore, a low concentration of dopants randomly adsorbed along a two-hundred nm long bundle drives a change in the transport regime; from ballistic to diffusive, which can account for the high sensitivity to different molecules.

Teachers Formation in Higher Education: Some Aspects under the Light of Education-Work Relations

This text is mainly aimed to address essential aspects of teacher formation in the light of education-work relations in the higher education, from our systematic experience in higher education teaching, particularly teaching and research in the field of Didactics discipline. This formulation is justified considering our concern in seeking to situate this discussion in the context of bringing together knowledge areas and the field of teaching knowledge. Still, our choice to develop such an approach in the light of work-education relationship is due to the belief about the possibilities of seeking to overcome the requirements imposed by capitalism to our educational system, within the possible contradictions of these relationships. In this context the teachers’ formation in higher education gains social and strategic importance, taking on the task of forming individuals of “action-reflection-action” in a society established historically based on the social relations which settle in the light of capital’s multiple determinations. It appears that, in this sense, the major confrontations have been given within the discussions about what to prioritize or combine in the list of criteria and content for teacher’s formation. In Didactic, we seek to emphasize discussions that we consider with a philosophical background, referring to the orientation of teaching practice in knowledge of contemporary ideological struggle; socio-historical, referring to the possibility of formation of disciplines, among them Didactic, and curriculums and references to support its guidance in the process of teacher’s formation. This context of discussion is based on the concrete teaching practice with a view to transformation and to search for new syntheses in terms of knowledge and in terms of historical reality. Then therefore, our methodological approach grounded in the dimensions of the same unit: historical materialism as posture, method and as praxis.

Challenges and opportunities for knowledge organization at the intersection with information technologies

In this paper we study the intersection of Knowledge Organization with Information Technologies and the challenges and opportunities for Knowledge Organization experts that, in our view, are important to be studied and for them to be aware of. We start by giving some definitions necessary for providing the context for our work. Then we review the history of the Web, beginning with the Internet and continuing with the World Wide Web, the Semantic Web, problems of Artificial Intelligence, Web 2.0, and Linked Data. Finally, we conclude our paper with IT applications for Knowledge Organization in libraries, such as FRBR, BIBFRAME, and several OCLC initiatives, as well as with some of the challenges and opportunities in which Knowledge Organization experts and researchers might play a key role in relation to the Semantic Web.

COMPARISON BETWEEN MECHANICAL PROPERTIES AND MICROSTRUCTURE OF ALLOY TI-6AL4V, COLD WORK VERSUS PROTOTIPES BY DIRECT METAL LASER SINTERING

The present work aims to study the microstructure and mechanical properties of titanium alloys, widely used in the manufacture of orthopedic implants in order to compare a new manufacturing technology of implants, rapid prototyping in metals with conventional manufacturing processes. Rapid prototyping is being used in many areas of human knowledge to assist in the study and often in the manufacture of components for their own use. Nowadays with the advancement of software and equipment such as computed tomography and magnetic resonance imaging, we can reproduce any part of the human body in three-dimensional images with great perfection and it is used in the reproduction of implants, scaffolds, material aid and preparation in surgery. This work aims to do: A comparison between the microstructure of the alloy in the two manufacturing processes (prototyping and conventional), showing the grain size, the nature, form, quantity, and distribution of various ingredients or certain inclusions and study of mechanical properties of titanium in both cases.

Pharmaceutical care in Brazilian community pharmacies: knowledge and practice

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)