Isothermal structural evolution of SnO2 monolithic porous xerogels

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fluorescence and confocal laser scanning microscopy imaging of elastic fibers in hematoxylin-eosin stained sections

We have studied the possibility of associating fluorescence microscopy and hematoxylin-eosin staining for the identification of elastic fibers in elastin-rich tissues. Elastic fibers and elastic laminae were consistently identified by the proposed procedure, which revealed itself to be easy and useful for the determination of such structures and their distribution. The fluorescence properties of stained elastic fibers are due to eosin staining as revealed by fluorescence analysis of the dye in solution, with no or only minor contribution by the elastin autofluorescence. The main advantage of this technique resides in the possibility of studying the distribution of elastic fibers in file material without further sectioning and staining. The use of the confocal laser scanning microscope greatly improved the resolution and selectivity of imaging elastic fibers in different tissues. The determination of the three-dimensional distribution and structure of elastic fiber and laminae using the confocal laser scanning microscope was evaluated and also produced excellent results.

Immunohematopathology markers in paraffin sections

New monoclonal antibodies have made the use of formalin fixed, paraffin embedded sections practical for immunotyping and immunodiagnosing many hematolymphoid neoplasms. In addition, they can be helpful in classifying malignant lymphomas and leukemias through patterns of immunoreactivity. The most useful. lymphoid antibodies and diagnostic situations in which they can be deployed are discussed.

Non-isothermal kinetic of oxidation of tungsten carbide

Tungsten carbide, WC, has shown dissimilar thermal behavior when it is heated on changeable heating rate and flow of oxidant atmosphere. The oxidation of WC to WO3 tends to be in a single and slow kinetic step on slow heating rate and/or low flux of air. Kinetic parameters, on non-isothermal condition, could be evaluated to the oxidation of WC to heating rate below 15 degrees C min(-1) or low flow of air (10 mL min(-1)). The reaction is governed by nucleation and growth at 5 to 10 degrees C min(-1) then the tendency is to be autocatalytic, JMA and SB, respectively.

DETECTION OF CELL-PROLIFERATION IN TISSUE-SECTIONS

1. Cell proliferation is of interest since abnormal cell proliferation appears to be a precursor of tumorigenesis and also because the quantitative description of cell proliferation in tumors can be used to predict the biological behavior of a particular neoplasia.2. Them am several reliable methods of studying cell proliferation in tissues. One of the most important is the detection of the Ki67 defined antigen in frozen sections. The number of cells expressing Ki67 correlates with histological grades of tumors and can also be predictive of clinical outcome. The Ki67 can be localized in tissue sections using monoclonal antibodies in association with the immunoperoxidase technique.3. Proliferating cell nuclear antigen (PCNA) is a component of DNA polymerase-delta and is another important cell proliferation marker manifesting a striking increase in concentration during the S phase of the cell cycle. 19A2 and PC10 are two different monoclonal antibodies which can be employed to detect PCNA in paraffin-embedded tissues.4. Molecular biology has also been making a great contribution to the study of cell proliferation. The most recent innovation in tissue identification of proliferating cells is the use of in situ hybridization for the localization of histone H3 and/or H4 mRNA. H3 mRNA-positive cells appear to be present in basal cells of the skin and in crypt cells of the intestine which are sites with high proliferation rate.

Differential cross sections for target excitation and positronium formation in positron-helium scattering

Positronium formation and target excitation in positron-helium scattering have been investigated using the close-coupling approximation with realistic wave functions for the positronium and helium atoms. The following eight states have been used in the close-coupling scheme: He(1s1s), He(1s2(1)s), He(1s2(1)p), He(1s3(1)s), He(1s3(1)p), Ps(1s), Ps(2s), and Ps(2p), where Ps stands for the positronium atom. Calculations are reported of differential cross sections for elastic scatering,, inelastic target excitation to He(1s2(1)s) and He(1s2(1)p) slates, and rearrangement transition to Ps(1s), Ps(2s), and Ps(2p) states for incident positron energies between 40 and 200 eV. The coincidence parameters for the transition to the He(1s2(1)p) state of helium are also reported and briefly discussed. [S1050-2947(98)05101-4].

Titanium(IV)-EDTA complex - Kinetics of thermal decomposition by non-isothermal procedures

This work aims the evaluation of the kinetic triplets corresponding to the two successive steps of thermal decomposition of Ti(IV)-ethylenediaminetetraacetate complex. Applying the isoconversional Wall-Flynn-Ozawa method on the DSC curves, average activation energy: E=172.4 +/- 9.7 and 205.3 +/- 12.8 kJ mol(-1), and pre-exponential factor: logA = 16.38 +/- 0.84 and 18.96 +/- 1.21 min(-1) at 95% confidence interval could be obtained, regarding the partial formation of anhydride and subsequent thermal decomposition of uncoordinated carboxylate groups, respectively.From E and logA values, Dollimore and Malek methods could be applied suggesting PT (Prout-Tompkins) and R3 (contracting volume) as the kinetic model to the partial formation of anhydride and thermal decomposition of the carboxylate groups, respectively.

Tin(II)-EDTA complex: kinetic of thermal decomposition by non-isothermal procedures

Tin on the oxide form, alone or doped with others metals, has been extensively used as gas sensor, thus, this work reports on the preparation and kinetic parameters regarding the thermal decomposition of Sn(II)-ethylenediaminetetraacetate as precursor to SnO2. Thus, the acquaintance with the kinetic model regarding the thermal decomposition of the tin complex may leave the door open to foresee, whether it is possible to get thin film of SnO2 using Sn(II)-EDTA as precursor besides the influence of dopants added.The Sn(II)-EDTA soluble complex was prepared in aqueous medium by adding of tin(II) chloride acid solution to equimolar amount of ammonium salt from EDTA under N-2 atmosphere and temperature of 50degreesC arising the pH similar to 4. The compound was crystallized in ethanol at low-temperature and filtered to eliminate the chloride ions, obtaining the heptacoordinated chelate with the composition H2SnH2O(CH2N(CH2COO)(2))(2).0.5H(2)O.Results from TG, DTG and DSC curves under inert and oxidizing atmospheres indicate the presence of water coordinated to the metal and that the ethylenediamine fraction is thermally more stable than carboxylate groups. The final residue from thermal decomposition was the SnO2 characterized by X-ray as a tetragonal rutile phase.Applying the isoconversional Wall-Flynn-Ozawa method on the DSC curves, average activation energy: E-a = 183.7 +/- 12.7 and 218.9 +/- 2.1 kJ mol(-1), and pre-exponential factor: log A = 18.85 +/- 0.27 and 19.10 +/- 0.27 min(-1), at 95% confidence level, could be obtained, regarding the loss of coordinated water and thermal decomposition of the carboxylate groups, respectively. The E-a and logA also could be obtained applying isoconventional Wall-Flynn method on the TG curves.From E-a and log A values, Dollimore and Malek procedures could be applied suggesting R3 (contracting volume) and SB (two-parameter model) as the kinetic model to the loss of coordinated water (177-244degreesC) and thermal decomposition of the carboxylate groups (283-315degreesC), respectively. Simulated and experimental normalized DTG and DSC curves besides analysis of residuals check these kinetic models. (C) 2003 Elsevier B.V. All rights reserved.

Image registration and image interpolation in volume rendering of cross sections

We outline a method for registration of images of cross sections using the concepts of The Generalized Hough Transform (GHT). The approach may be useful in situations where automation should be a concern. To overcome known problems of noise of traditional GHT we have implemented a slight modified version of the basic algorithm. The modification consists of eliminating points of no interest in the process before the application of the accumulation step of the algorithm. This procedure minimizes the amount of accumulation points while reducing the probability of appearing of spurious peaks. Also, we apply image warping techniques to interpolate images among cross sections. This is needed where the distance of samples between sections is too large. Then it is suggested that the step of registration with GHT can help the interpolation automation by simplifying the correspondence between points of images. Some results are shown.

Western blot analysis of tick antigens from a Rhipicephalus sanguineus unfed larval extract and identification of antigenic sites in tick sections using immunohistochemistry. A comparative study between resistant and susceptible host species

Most parasite-host relationships are characterized by the development of resistance by the host, thus limiting the number of parasites. However, some cases are very unusual. In the relationship of the domestic dog with the brown dog-tick Rhipicephalus sanguineus this does not occur, whereas guinea pigs develop efficient resistance. Sera from domestic dogs, crab-eating foxes and guinea pigs collected before and after infestation with R. sanguineus ticks, and after immunization with a whole tick adult or larval homogenate, were used in Western blot analysis to compare and identify potential important antigens from a tick larval homogenate. The same sera were tested in an indirect immunohistochemistry assay in an attempt to compare relevant antigenic sites on histological tick sections. The immunoblotting displayed antigens recognized only by the guinea pigs, as well as several shared antigens between host species, depending on the kind of immunization. Immunohistochemistry revealed probable antigenic sites on the cells and tissues of ticks, which varied depending on the kind of immunization (infestation or vaccination) and the animal species involved.

A steady-state model for heat pipes of circular or rectangular cross-sections

The objective of this paper is to present a generalized analytical-numerical model of the internal flow in heat pipes. The model formulation is based on two-dimensional formulation of the energy and momentum equations in the vapour and liquid regions and also in the metallic tube. The numerical solution of the model is obtained by using the descretization scheme LOAD and the SIMPLE numerical code. The flow fields, as well as the pressure fields, for different geometries were obtained and discussed. Copyright © 1996 Elsevier Science Ltd.

EXAFS and XRD Study of the Structural Evolution during Isothermal Sintering of SnO2 Xerogels

The formation of an ordered (crystalline) phase during isothermal sintering of SnO2 monolithic xerogels, at 200, 250, 300, 400, 500, 600 and 700°C, has been analyzed by the combined use of EXAFS and XRD techniques. For the desiccated gel (110°C), EXAFS results show the formation of small microcrystallites with the incipient cassiterite structure. Between 110 and 250°C, the dehydratation reaction leads to an amorphization evidenced by a decrease of the long and short range crystallographic order. It is due to fissure formation in the xerogel network. For higher temperatures, a continuous coagulation of the crystallites occurs, leading to grain growth. Grain and pore growth obeys the same kinetic relation, so that the microstructure grows by simple enlargement while its morphology is static.

Genetic variation between several species of sections Extranervosae, Caulorrhizae, Heteranthae, and Triseminatae (genus Arachis) estimated by DNA polymorphism

Genetic variation within and among accessions of the genus Arachis representing sections Extranervosae, Caulorrhizae, Heteranthae, and Triseminatae was evaluated using RFLP and RAPD markers. RAPD markers revealed a higher level of genetic diversity than did RFLP markers, both within and among the species evaluated. Phenograms based on various band-matching algorithms revealed three major clusters of similarity among the sections evaluated. The first group included the species from section Extranervosae, the second group consisted of sections Triseminatae, Caulorrhizae, and Heteranthae, and the third group consisted of one accession of Arachis hypogaea, which had been included as a representative of section Arachis. The phenograms obtained from the RAPD and RFLP data were similar but not identical. Arachis pietrarellii, assayed only by RAPD, showed a high degree of genetic similarity with Arachis villosulicarpa. This observation supported the hypothesis that these two species are closely related. It was also shown that accession V 7786, previously considered to be Arachis sp. aff. pietrarellii, and assayed using both RFLPs and RAPDs, was possibly a new species from section Extranervosae, but very distinct from A. pietrarellii.

Positron-helium scattering: Resonance and differential cross sections

We study positron-helium scattering using close coupling approximation (CCA) employing different combinations of the following basis functions: He(1s1s), He(1s2s), He(1s2p), Ps(1s). and Ps(2s), where Ps stands for the positronium atom. We observe a prominent S wave resonance of width 2 eV at about 30 eV, in excitation and rearrangement cross sections to He(1s2s), He(1s2p), Ps(1s) and Ps(2s) states. We also report results of differential cross sections for the excitation of helium and positronium formation.

Non-isothermal study of the devitrification kinetics of fluoroindate glasses

The understanding of the kinetics of devitrification of a glass is important for anticipating its stability in a particular purpose, such as fiber-drawing processes. The crystallization kinetics of (BaF2)16(ZnF2)20(SrF 2)20(NaF)2 (GaF3)5(InF3)36(GdF 3)1 glass prepared by quenching were studied by differential scanning calorimetry (DSC). Avrami's exponent (n) obtained by a non-isothermal method was 4.3 for a solid and 2.4 for a powdered sample. According to the classical interpretation of n, these magnitudes correspond to an interface-controlled crystal growth and a diffusion-controlled crystal growth, respectively. The activation energies for crystallization (E) was 62 ± 1 kJ/mol for solid glass and 245 ± 2 kJ/mol for powdered glass. These results are discussed in terms of glass particle size. © 2000 Elsevier Science B.V. All rights reserved.