Foreign Direct Investment, Clean Development Mechanism, and Environmental Management: A case of Sub-Saharan Africa

This doctoral dissertation explores the contribution of environmental management practices, the so-called clean development mechanism (CDM) projects, and foreign direct investment (FDI) in achieving sustainable development in developing countries, particularly in Sub- Saharan Africa. Because the climate change caused by greenhouse gas emissions is one of the most serious global environmental challenges, the main focus is on the causal links between carbon dioxide (CO2) emissions, energy consumption, and economic development in Sub-Saharan Africa. In addition, the dissertation investigates the factors that have affected the distribution of CDM projects in developing countries and the relationships between FDI and other macroeconomic variables of interest. The main contribution of the dissertation is empirical. One of the publications uses crosssectional data and Tobit and Poisson regressions. Three of the studies use time-series data and vector autoregressive and vector error correction models, while two publications use panel data and panel data estimation methods. One of the publications uses thus both timeseries and panel data. The concept of Granger causality is utilized in four of the publications. The results indicate that there are significant differences in the Granger causality relationships between CO2 emissions, energy consumption, economic growth, and FDI in different countries. It appears also that the causality relationships change over time. Furthermore, the results support the environmental Kuznets curve hypothesis but only for some of the countries. As to CDM activities, past emission levels, institutional quality, and the size of the host country appear to be among the significant determinants of the distribution of CDM projects. FDI and exports are also found to be significant determinants of economic growth.

Deinking sludge utilization possibilities: technical, economic, and environmental assessments

This report introduces the ENPI project called “EMIR - Exploitation of Municipal and Industrial Residues” which was executed in a co-operation between Lappeenranta University of Technology (LUT), Saint Petersburg State University of Economics (SPbSUE), Saint Petersburg State Technical University of Plant Polymers (SPbSTUPP) and industrial partners from both Leningrad Region (LR), Russia and Finland. The main targets of the research were to identify the possibilities for deinking sludge management scenarios in co-operation with partner companies, to compare the sustainability of the alternatives, and to provide recommendations for the companies in the Leningrad Region on how to best manage deinking sludge. During the literature review, 24 deinking sludge utilization possibilities were identified, the majority falling under material recovery. Furthermore, 11 potential utilizers of deinking sludge were found within the search area determined by the transportation cost. Each potential utilizer was directly contacted in order to establish cooperation for deinking sludge utilization. Finally, four companies, namely, “Finnsementti” – a cement plant in Finland (S1), “St.Gobian Weber” – a light-weight aggregate plant in Finland (S2), “LSR-Cement” – a cement plant in LR (S3), and “Rockwool” – a stone wool plant in LR (S4) were seen as the most promising partners and were included in the economic and environmental assessments. Economic assessment using cost-benefit analysis (CBA) indicated that substitution of heavy fuel oil with dry deinking sludge in S2 was the most feasible option with a benefit/cost ratio (BCR) of 3.6 when all the sludge was utilized. At the same time, the use of 15% of the total sludge amount (the amount that could potentially be treated in the scenario) resulted in a BCR of only 0.16. The use of dry deinking sludge in the production of cement (S3) is a slightly more feasible option with a BCR of 1.1. The use of sludge in stone wool production is feasible only when all the deinking sludge is used and burned in an existing incineration plant. The least economically feasible utilization possibility is the use of sludge in cement production in Finland (S1) due to the high gate fee charged. Environmental assessment was performed applying internationally recognized life cycle assessment (LCA) methodologies: ISO 14040 and ISO 14044. The results of a consequential LCA stated that only S1 and S2 lead to a reduction of all environmental impacts within the impact categories chosen compared to the baseline scenario where deinking sludge is landfilled. Considering S1, the largest reduction of 13% was achieved for the global warming potential (GWP), whereas for S2, the largest decrease of abiotic depletion potential (ADP) was by 1.7%, the eutrophication potential (EP) by 1.8%, and a GWP of 2.1% was documented. In S3, the most notable increase of ADP and acidification potential (AP) by 2.6 and 1.5% was indicated, while the GWP was reduced by 12%, the largest out of all the impact categories. In S4, ADP and AP increased by 2.3 and 2.1% respectively, whereas ODP was reduced by 25%. During LCA, it was noticed that substitution of fuels causes a greater reduction of environmental impact (S1 and S2) than substitution of raw materials (S3 and S4). Despite a number of economically and environmentally acceptable deinking sludge utilization methods being assessed in the research, evaluation of bottlenecks and communications with companies’ representatives uncovered the fact that the availability of the raw materials consumed, and the risks associated with technological problems resulting from the sludge utilization, limited the willingness of industrial partners to start deinking sludge utilization. The research results are of high value for decision-makers at already existing paper mills since the result provide insights regarding alternatives to the deinking sludge utilization possibilities already applied. Thus, the research results support the maximum economic and environmental value recovery from waste paper utilization.

Genetic and environmental influences on blood pressure and physical activity: a study of nuclear families from Muzambinho, Brazil

Blood pressure (BP) and physical activity (PA) levels are inversely associated. Since genetic factors account for the observed variation in each of these traits, it is possible that part of their association may be related to common genetic and/or environmental influences. Thus, this study was designed to estimate the genetic and environmental correlations of BP and PA phenotypes in nuclear families from Muzambinho, Brazil. Families including 236 offspring (6 to 24 years) and their 82 fathers and 122 mothers (24 to 65 years) were evaluated. BP was measured, and total PA (TPA) was assessed by an interview (commuting, occupational, leisure time, and school time PA). Quantitative genetic modeling was used to estimate maximal heritability (h²), and genetic and environmental correlations. Heritability was significant for all phenotypes (systolic BP: h² = 0.37 ± 0.10, P < 0.05; diastolic BP: h² = 0.39 ± 0.09, P < 0.05; TPA: h² = 0.24 ± 0.09, P < 0.05). Significant genetic (r g) and environmental (r e) correlations were detected between systolic and diastolic BP (r g = 0.67 ± 0.12 and r e = 0.48 ± 0.08, P < 0.05). Genetic correlations between BP and TPA were not significant, while a tendency to an environmental cross-trait correlation was found between diastolic BP and TPA (r e = -0.18 ± 0.09, P = 0.057). In conclusion, BP and PA are under genetic influences. Systolic and diastolic BP share common genes and environmental influences. Diastolic BP and TPA are probably under similar environmental influences.

Electromagnetic and thermal design of a multilevel converter with high power density and reliability

Electric energy demand has been growing constantly as the global population increases. To avoid electric energy shortage, renewable energy sources and energy conservation are emphasized all over the world. The role of power electronics in energy saving and development of renewable energy systems is significant. Power electronics is applied in wind, solar, fuel cell, and micro turbine energy systems for the energy conversion and control. The use of power electronics introduces an energy saving potential in such applications as motors, lighting, home appliances, and consumer electronics. Despite the advantages of power converters, their penetration into the market requires that they have a set of characteristics such as high reliability and power density, cost effectiveness, and low weight, which are dictated by the emerging applications. In association with the increasing requirements, the design of the power converter is becoming more complicated, and thus, a multidisciplinary approach to the modelling of the converter is required. In this doctoral dissertation, methods and models are developed for the design of a multilevel power converter and the analysis of the related electromagnetic, thermal, and reliability issues. The focus is on the design of the main circuit. The electromagnetic model of the laminated busbar system and the IGBT modules is established with the aim of minimizing the stray inductance of the commutation loops that degrade the converter power capability. The circular busbar system is proposed to achieve equal current sharing among parallel-connected devices and implemented in the non-destructive test set-up. In addition to the electromagnetic model, a thermal model of the laminated busbar system is developed based on a lumped parameter thermal model. The temperature and temperature-dependent power losses of the busbars are estimated by the proposed algorithm. The Joule losses produced by non-sinusoidal currents flowing through the busbars in the converter are estimated taking into account the skin and proximity effects, which have a strong influence on the AC resistance of the busbars. The lifetime estimation algorithm was implemented to investigate the influence of the cooling solution on the reliability of the IGBT modules. As efficient cooling solutions have a low thermal inertia, they cause excessive temperature cycling of the IGBTs. Thus, a reliability analysis is required when selecting the cooling solutions for a particular application. The control of the cooling solution based on the use of a heat flux sensor is proposed to reduce the amplitude of the temperature cycles. The developed methods and models are verified experimentally by a laboratory prototype.

Economic and environmental evaluation of renewable energy systems

The main objective of this thesis is to evaluate the economic and environmental effectiveness of three different renewable energy systems: solar PV, wind energy and biomass energy systems. Financial methods such as Internal Rate of Return (IRR) and Modified Internal Rate of Return (MIRR) were used to evaluate economic competitiveness. Seasonal variability in power generation capability of different renewable systems were also taken into consideration. In order to evaluate the environmental effectiveness of different energy systems, default values in GaBi software were taken by defining the functional unit as 1kWh. The results show that solar PV systems are difficult to justify both in economic as well as environmental grounds. Wind energy performs better in both economic and environmental grounds and has the capability to compete with conventional energy systems. Biomass energy systems exhibit environmental and economic performance at the middle level. In each of these systems, results vary.

Level and precision of behavioural thermoregulation in the bearded dragon, Pogona vitticeps : effects of hypoxia and environmental thermal quality /

Most metabolic functions are optimized within a narrow range of body temperatures, which is why thermoregulation is of great importance for the survival and overall fitness of an animal. It has been proposed that lizards will thermoregulate less precisely in low thermal quality environments, where the costs associated with thermoregulation are high; in the case of lizards, whose thermoregulation is mainly behavioural, the primary costs ofthermoregulation are those derived from locomotion. Decreasing thermoregulatory precision in costly situations is a strategy that enhances fitness by allowing lizards to be more flexible to changing environmental conditions. It allows animals to maximize the benefits of maintaining a relatively high body temperature while minimizing energy expenditure. In situations where oxygen concentration is low, the costs of thermoregulation are relatively high (i.e. in relation to the amount of oxygen available for metabolic functions). As a result, it is likely that exposures to hypoxic conditions induce a decrease in the precision of thermoregulation. This study evaluated the effects of hypoxia and low environmental thermal quality, two energetically costly conditions, on the precision and level of thermoregulation in the bearded dragon, Pogona vitticeps, in an electronic temperature-choice shuttle box. Four levels of hypoxia (1O, 7, 5 and 4% 02) were tested. Environmental thermal quality was manipulated by varying the rate of temperature change (oTa) in an electronic temperature-choice shuttle box. Higher oT a's translate into more thermally challenging environments, since under these conditions the animals are forced to move a greater number of times (and hence invest more energy in locomotion) to maintain similar temperatures than at lower oTa's. In addition, lizards were tested in an "extreme temperatures" treatment during which air temperatures of the hot and cold compartments of the shuttle box were maintained at a constant 50 and 15°C respectively. This was considered the most thermally challenging environment. The selected ambient (T a) and internal body temperatures (Tb) of bearded dragons, as well as the thermoregulatory precision (measured by the central 68% ofthe Ta and T b distribution) were evaluated. The thermoregulatory response was similar to both conditions. A significant increase in the size of the Tb range, reflecting a decrease in thermoregulatory precision, and a drop in preferred body temperature of ~2 °C, were observed at both 4% oxygen and at the environment of lowest thermal quality. The present study suggests that in energetically costly situations, such as the ones tested in this study, the bearded dragon reduces energy expenditure by decreasing preferred body temperature and minimizing locomotion, at the expense of precise behavioural thermoregulation. The close similarity of the behavioural thermoregulatory response to two very different stimuli suggests a possible common mechanism and neuronal pathway to the thermoregulatory response.

Predicting Physical, Verbal, Social, Racial, and Sexual Bullying with Individual and Environmental Factors from an Evolutionary Ecological Framework

Evidence exists for subtypes of bullying, but there is a lack of studies simultaneously investigating the factors that influence each subtype. The purpose of my thesis was to investigate how individual and environmental factors independently and interactively predict physical, verbal, social, racial, and sexual bullying using an evolutionary ecological framework. Adolescents (N = 225, M = 14.05, SD = 1.54) completed self-reports on demographics, HEXACO personality, Rothbart’s temperament, parenting, friendship quality, school connectedness, and socio-economic status. Subtypes were predicted by low Honesty-Humility in addition to other personality and demographic factors with the exception of physical bullying, which was predicted by environmental factors. Results suggest adolescents adaptively and selectively use bullying to exploit victims and obtain resources, although the subtype used may depend on individual factors bullies possess within Bronfenbrenner’s microsystem, instead of the meso- and exo- systems. Anti-bullying efforts should target these factors and reinforce alternative strategies to obtain resources.

The regulation of adult hippocampal neurogenesis by wheel running and environmental enrichment

Introduction: Chez les mammifères, la naissance de nouveaux neurones se poursuit à l’âge adulte dans deux régions du cerveau: 1) l’hippocampe et 2) la zone sous-ventriculaire du prosencéphale. La neurogenèse adulte n’est pas un processus stable et peut être affectée par divers facteurs tels que l’âge et la maladie. De plus, les modifications de la neurogenèse peuvent être à l’origine des maladies de sorte que la régulation ainsi que le rétablissement de la neurogenèse adulte doivent être considérés comme d’importants objectifs thérapeutiques. Chez la souris saine ou malade, la neurogenèse hippocampale peut être fortement régulée par l’enrichissement environnemental ainsi que par l’activité physique. Cependant, lors même que l’activité physique et l’enrichissement environnemental pourraient contribuer au traitement de certaines maladies, très peu d’études porte sur les mécanismes moléculaires et physiologiques responsables des changements qui sont en lien avec ces stimuli. Objectifs et hypothèses: Les principaux objectifs de cette étude sont de caractériser les effets de stimuli externes sur la neurogenèse et, par le fait même, d’élucider les mécanismes sous-jacents aux changements observés. En utilisant le modèle d’activité physique volontaire sur roue, cette étude teste les deux hypothèses suivantes: tout d’abord 1) qu’une période prolongée d’activité physique peut influencer la neurogenèse adulte dans le prosencéphale et l’hippocampe, et 2) que l’activité volontaire sur roue peut favoriser la neurogenèse à travers des stimuli dépendants ou indépendants de la course. Méthodes: Afin de valider la première hypothèse, nous avons utilisé un paradigme incluant une activité physique volontaire prolongée sur une durée de six semaines, ainsi que des analyses immunohistochimiques permettant de caractériser l’activité de précurseurs neuronaux dans la zone sous-ventriculaire et l’hippocampe. Ensuite, pour valider la seconde hypothèse, nous avons utlisé une version modifiée du paradigme ci-dessous, en plaçant les animaux (souris) soit dans des cages traditionnelles, soit dans des cages munies d’une roue bloquée soit dans des cages munies d’une roue fonctionnelle. Résultats: En accord avec la première hypothèse, l’activité physique prolongée volontaire a augmenté la prolifération des précurseurs neuronaux ainsi que la neurogenèse dans le gyrus dentelé de l’hippocampe comparativement aux animaux témoins, confirmant les résultats d’études antérieures. Par ailleurs, dans ce paradigme, nous avons aussi observé de la prolifération acrue au sein de la zone sous-ventriculaire du prosencéphale. De plus, en accord avec la seconde hypothèse, les souris placées dans une cage à roue bloquée ont montré une augmentation de la prolifération des précurseurs neuronaux dans l’hippocampe comparable à celle observée chez les souris ayant accès à une roue fonctionnelle (coureurs). Cependant, seuls les animaux coureurs ont présenté une augmentation de la neurogenèse hippocampale. Conclusions: Ces résultats nous ont permis de tirer deux conclusions nouvelles concernant les effets de l’activité physique (course) sur la neurogenèse. Premièrement, en plus de la prolifération et de la neurogenèse dans le gyrus dentelé de l’hippocampe, la prolifération dans la zone sous-ventriculaire du prosencéphale peut être augmentée par l’activité physique sur roue. Deuxièmement, l’environnement dans lequel l’activité physique a lieu contient différents stimuli qui peuvent influencer certains aspects de la neurogenèse hippocampale en l’absence d’activité physique sur roue (course).

Identification of behavioral and creational design patterns through dynamic analysis

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Meiobenthos of Cochin backwaters in relation to macrobenthos and environmental parameters

Department of Marine Biology, Microbiology and Biochemistry, Cochin University of Science and Technology

Career Advancement of MBAs: A study on the effect of personal, professional,organisational and environmental variables

School of Management Studies, Cochin University of Science and Technology

Paper industry in Kerala: An evaluation of labour absorption,capacity utilisation, and environmental pollution

Paper industry is one of the oldest and largest industries in Kerala. Despite the developments in the industry in terms of growth in output , value added and employment generation, many of the units face grave problems. Irrespective of the size of the plant, the problems of the industry are general in nature. The problems are galore in the supply, not the demand side. Amomg the problems, the important ones are: raw material scarcity, energy deficiency and obsolete technology. Further, the industry is subject to many controls by the Government — price control, product control and raw materials control — which result in the dwindling of profits and investments. Equally important are the reservations against the industry for polluting the environment byeffluent disposal on the one hand and affecting ecological balance by depleting the existing forest on the other. Apart from the large, medium and small pulp and paper mills, there are about 30 hand made paper units in Kerala which can be categorised as village and cottage industry. Almost all of these units began at the initiative and support of Khadi and Village Industries Commission. The primary purpose of these units is employment generation, and not profit making. Currently many of these units are in the red and many others are on the verge of closure. Therefore, a separate analysis of the growth performance, and problems and prospects of the hand made paper industry has also been attempted. It is analysed separately because of the very small size of the hand made paper units

Genetic variation of and environmental effects on inducibility of resistance in tomatoes (Solanum lycopersicum L.) to Phytophthora infestans (Mont) de Bary

Many plant strengtheners are promoted for their supposed effects on nutrient uptake and/or resistance induction (IR). In addition, many organic fertilizers are supposed to enhance plant health and several studies have shown that tomatoes grown organically are more resistant to late blight, caused by Phytophthora infestans to tomatoes grown conventionally. Much is known about the mechanisms underlying IR. In contrast, there is no systematic knowledge about genetic variation for IR. Therefore, the following questions were addressed in the presented dissertation: (i) Is there genetic variation among tomato genotypes for inducibility of resistance to P. infestans? (ii) How do different PS compare with the chemical inducer BABA in their ability to IR? (iii) Does IR interact with the inducer used and different organic fertilizers? A varietal screening showed that contrary to the commonly held belief IR in tomatoes is genotype and isolate specific. These results indicate that it should be possible to select for inducibility of resistance in tomato breeding. However, isolate specificity also suggests that there could be pathogen adaptation. The three tested PS as well as two of the three tested organic fertilisers all induced resistance in the tomatoes. Depending on PS or BABA variety and isolate effects varied. In contrast, there were no variety and isolate specific effects of the fertilisers and no interactions with the PS and fertilisers. This suggests that the different PS should work independent of the soil substrate used. In contrast the results were markedly different when isolate mixtures were used for challenge inoculations. Plants were generally less susceptible to isolate mixtures than to single isolates. In addition, the effectiveness of the PS was greater and more similar to BABA when isolate mixtures were used. The fact that the different PS and BABA differed in their ability to induce resistance in different host genotype -pathogen isolate combinations puts the usefulness of IR as a breeding goal in question. This would result in varieties depending on specific inducers. The results with the isolate mixtures are highly relevant. On the one hand they increase the effectiveness of the resistance inducers. On the other hand, measures that increase the pathogen diversity such as the use of diversified host populations will also increase the overall resistance of the hosts. For organic tomato production the results indicate that it is possible to enhance the tomato growing system with respect to plant health management by using optimal fertilisers, plant strengtheners and any measures that increase system diversity.

Dispute resolution and “environmental” provisions in the WTO: promising developments for environmental matters

En la actualidad, la política internacional tiende hacia la unificación económica y cultural (globalización), en la cual la totalidad de las naciones se encuentran vinculadas por interacciones comerciales. Para que los compromisos adquiridos en materia de protección ambiental sean respetados, el derecho ambiental debe dejar de ser considerado como una disciplina separada y buscar sinergias que le permitan convertirse en un actor importante en las relaciones comerciales. En el presente ensayo se argumenta que el comercio internacional y el derecho ambiental han coevolucionado en las últimas tres décadas, hasta llegar a un balance en el concepto de desarrollo sostenible.Este artículo explora esta coevolución, mientras propone que la Organización Mundial del Comercio (OMC) puede jugar un importante rol en el cumplimiento de los objetivos internacionales de protección ambiental si sus disposiciones “verdes” y su sistema de resolución de conflictos son utilizados para promoverlos, tal como está sucediendo. Para ilustrar este punto, se presenta un breve resumen de los tratados comerciales y ambientales suscritos desde los años setenta, seguido de una explicación de las disposiciones legales de la OMC que pueden ser consideradas como “verdes”, con el fin de hallar puntos de convergencia que puedan ser utilizados por los países miembros no solo para justificar la adopción de normativas domésticas de protección ambiental, sino también para instar a los otros signatarios en el cumplimiento de sus obligaciones en esta área.