Pragmática

Real Pragmática fechada el 24 de septiembre de 1736

Estudo da participação das espécies fortemente oxidantes produzidas durante a oxidação eletroquímica de corantes usando eletrodo de diamante dopado com boro: função das propriedades eletroquímicas do eletrodo e condições experimentais

The textile industry is one of the most polluting in the world (AHMEDCHEKKAT et al. 2011), generating wastewater with high organic loading. Among the pollutants present in these effluents are dyes, substances with complex structures, toxic and carcinogenic characteristics, besides having a strong staining. Improper disposal of these substances to the environment, without performing a pre-treatment can cause major environmental impacts. The objective this thesis to use a technique of electrochemical oxidation of boron doped diamond anode, BDD, for the treatment of a synthetic dye and a textile real effluent. In addition to studying the behavior of different electrolytes (HClO4, H3PO4, NaCl and Na2SO4) and current densities (15, 60, 90 and 120 mA.cm-2 ), and compare the methods with Rhodamine B (RhB) photolysis, electrolysis and photoelectrocatalytic using H3PO4 and Na2SO4. Electrochemical oxidation studies were performed in different ratio sp3 /sp2 of BDD with solution of RhB. To achieve these objectives, analysis of pH, conductivity, UV-visible, TOC, HPLC and GC-MS were developed. Based on the results with the Rhodamine B, it was observed that in all cases occurred at mineralization, independent of electrolyte and current density, but these parameters affect the speed and efficiency of mineralization. The radiation of light was favorable during the electrolysis of RhB with phosphate and sulfate. Regarding the oxidation in BDD anode with different ratio sp3 /sp2 (165, 176, 206, 220, 262 e 329), with lower carbon-sp3 had a longer favoring the electrochemical conversion of RhB, instead of combustion. The greater the carbon content on the anodes BDD took the biggest favor of direct electrochemical oxidation

Avaliação das propriedades das fibras de algodões coloridos naturalmente e ecologicamente corretas cultivados nos assentamentos do município de Guamaré/RN

In this work evaluate the technical characteristics of the fibers grown in settlements Guamaré, colored cotton seeds were donated existing in the Germplasm Bank of Embrapa Cotton. We sought through the breeding program, raising the resistance, fineness, length and uniformity of cotton fibers, as well as stabilize the staining of fibers in the BRS Topaz, BRS Brown and BRS Green shades and raise their productivity in the field. First, the individual selections to test progeny seeds, and thereafter the hybridization method followed by family selection to obtain variations in the color tones were performed. The BRS Topaz, BRS Brown and BRS Green varieties were produced, analyzed and compared with existing cottons in the region which is the White cotton. The properties amount of impurities and neps, length, length uniformity, short fiber content, fineness and tensile strength of the fibers were sized in Classifiber, NATI, Pressley and Micronaire devices. 10 trials each with 10 tests for all four fiber types were carried out. The White and Topaz fibers showed greater length (32-34mm) and greater resistance (7.94 lb/mg and 7.97 lb/mg respectively) and showed finesse with lower micronaire index 3,71μg/inch and 3, 73μg/inch and a low rate of short fibers. The results were very promising for the use of genetically improved cotton in the manufacturing of fabric and yarn in the textile industry. The fibers were brown colored cotton used in the manufacture of a composite fiber with thermoplastic resin

Avaliação do tratamento eletroquímico (direto e indireto) como alternativa de degradação do corante azul de metileno

Textile industry has been a cause of environmental pollution, mainly due to the generation of large volumes of waste containing high organic loading and intense color. In this context, this study evaluated the electrochemical degradation of synthetic effluents from textile industry containing Methylene Blue (AM) dye, using Ti/IrO2-Ta2O5 and Ti/Pt anodes, by direct and indirect (active chlorine) electrooxidation. We evaluated the influence of applied current density (20, 40 and 60 mA/cm2 ), and the presence of different concentrations of electrolyte (NaCl and Na2SO4), as well as the neutral and alkaline pH media. The electrochemical treatment was conducted in a continuous flow reactor, in which the electrolysis time of the AM 100 ppm was 6 hours. The performance of electrochemical process was evaluated by UV-vis spectrophotometry, chemical oxygen demand (COD) and total organic carbon (TOC). The results showed that with increasing current density, it was possible to obtain 100 % of color removal at Ti/IrO2-Ta2O5 and Ti/Pt electrodes. Regarding the color removal efficiency, increasing the concentration of electrolyte promotes a higher percentage of removal using 0,02 M Na2SO4 and 0,017 M NaCl. Concerning to the aqueous medium, the best color removal results were obtained in alkaline medium using Ti/Pt. In terms of organic matter, 86 % was achieved in neutral pH medium for Ti/Pt; while a 30 % in an alkaline medium. To understand the electrochemical behavior due to the oxygen evolution reaction, polarization curves were registered, determining that the presence of NaCl in the solution favored the production of active chlorine species. The best results in energy consumption and cost were obtained by applying lower current density (20 mA/cm2 ) in 6 hours of electrolysis.

Gestão da cadeia de suprimento e vantagem competitiva: uma análise em setores industriais a partir da visão relacional

This work has as its main purpose to investigate the contribution of supply chain management in order to obtain competitive advantage by companies from the textile industry and from Ceará footwear industry, focusing its analysis mainly in the interorganizational relations (dyadic). For this, the theoretical referential contemplates different explanatory streams of the competitive advantage, detaching the relational perception of the resources theory, as well as, the main presuppositions of the supply chain management which culminates with the development of an analysis sample that runs the empirical study; the one which considers an expanded purpose of the supply chain which includes the government and the abetment institutions as institutional environment representatives. Besides supply chain management consideration as a competitive advantage source, the work also tried to identify other possible competitive advantage sources for the companies of the investigated sectors. It represents a study of multiple interpretive cases, having four cases as a total; meaning two cases in each one of the sectors, which used as a primary data collecting instrument a semi-structured interview schedule. Different methods were used for the data analysis, the content analysis and the constant comparison methods, the analytical procedure originated from the grounded theory research strategy, which were applied the Atlas/ti software recourse. Considering the theoretical referential and the used analysis sample, four basic categories of the work were defined, including its respective proprieties and dimensions: (1) characteristics concerning to the relationship with the supplier; (2) the company relations with the government; (3) the company relations with the abetment institutions and; (4) obtaining sources of competitive advantage. In general, the applied research in the footwear sector revealed that in the relationships of the researched companies related to its suppliers, there is a predominance of the partnership system and the main presuppositions of the supply chain management are applied which contributes for the acquisition of the relational competitive advantage; while in the textile sector, only some of these presuppositions are applied, with little contribution for the relational competitive advantage. The main resource which was accessed by the companies in both sectors through its relationships with the government and the abetment institutions are the tax incentives which, for the footwear companies, contribute for the acquisition of the temporary competitive advantage in relation to the contestants who do not own productive installations in the Northeast region, it also conducts to a competitive parity situation in relation to the contestants who own productive installations in the Northeast region and to the external market contestants; while for the companies of the textile sector, the tax incentives run the companies to a competitive parity situation in relation to its contestants. Furthermore, the investigated companies from the two sectors possess acquisition sources of the competitive advantage which collimate with different explanatory streams (industrial analysis, resources theory, Austrian school and the dynamic capabilities theory), although there is a predominance of the product innovation as a competitive advantage source in both sectors, due to the bond of these with the fashion tendencies

Contribuições da inserção musical para a qualidade de vida no trabalho em ambiente laboral fabril

The present thesis aimed at understanding how the insertion of music in the work environment contributes to achieving Quality of Work Life. - QWL, under the perspective of biopsychosocial and organizational well-being. As to music insertion we considered the theoretical-empirical perception about how music is inserted at work and its functions on such place. The context where the study was taken was the manufacturing area of a major textile company, located in Natal, state of Rio Grande do Norte, Brazil, in which music is used during labor activities. The only study case was the research strategy adopted, with exploratory and descriptive purposes. The primary data were collected through the focus group technique, applied to the collaborator in the manufacturing sector. The semi-structured interview was done as a complementary tool, directed to the supervisor in that sector. Respecting the theoretical saturation criterion, we formed four focus groups, each one composed of eight members randomly selected, among the seventy-six collaborators in the sector. The data were analyzed qualitatively, through the content analysis technique, more specifically the category analysis. We identified twenty-eight QWL attributes. Six of them were found present in the four focus groups and in the interview. Among these ones, the attribute of Interpersonal Relationship at Work, contemplating the Psychological and Organizational dimensions, was the only one anticipated in four out of fifteen theoretical models here listed. The attribute Music at Work Environment could be inserted in the four QWL dimensions, highlighting the power and relevance of this attribute for the research participants. The way music has been inserted in the labor environment contributes to promoting well-being at work, which goes against theoretical conceptions, especially when it comes to musical genre. We identified nine functions of music at work, among which, Improving Work Conditions, Improving Interpersonal Relationship at Work and Favoring Motivation for Work had to be emphasized for being associated to three QWL attributes. In the total, we highlighted seven associations. The most affected QWL dimension through the insertion of music at work was the Psychological one, followed by the Organizational one. We conclude that music insertion provides biological, social and, above all, psychological and organizational well-being to the contributors, thus contributing to obtaining QWL at the labor environment researched. However, we should consider the context and proceed to periodical plans and adjustments in the way of music insertion so as to avoid health and well-being problems to those people at work

Avaliação ecotoxicológica de efluentes industriais utilizando Danio rerio Hamilton-Buchanan, 1822 (TELEOSTEI, CYPRINIDAE)

The industrial effluents are one of the main sources of water pollution. For an appropriate characterization and control of their discharges, the most efficient strategy is the integrated use of chemical, physical and ecotoxicological analyses. The aims of this study were to asses the efficiency of the treatment plant of a textile industry performing acute toxicity tests and physical-chemical analyses of the effluents before and after the treatment, besides evaluate the toxicity of the effluents of the Treatment System of Liquids Effluents (Sistema de Tratamento de Efluentes Líquidos - SITEL) of Distrito Industrial de Natal (DIN) and some of their physical-chemical variables. The species used in the ecotoxicological tests was the fish Danio rerio. The results showed that the treatment plant reduced significantly (around 50%) the toxicity of the raw textile effluent in only three of the seven tests but, in general, it promoted the reduction of the physical-chemical parameters analyzed. The toxicity and the physical-chemical factors of the effluents of SITEL of DIN varied among the tests and show the importance of monitoring their discharges in the Potengi river, one of the most important rivers of the Rio Grande do Norte state

Adsorção de corantes têxteis aniônicos e catiônicos em resíduos do processamento de fios de algodão modificados quimicamente

The textile industry generates a large volume of high organic effluent loading whoseintense color arises from residual dyes. Due to the environmental implications caused by this category of contaminant there is a permanent search for methods to remove these compounds from industrial waste waters. The adsorption alternative is one of the most efficient ways for such a purpose of sequestering/remediation and the use of inexpensive materials such as agricultural residues (e.g., sugarcane bagasse) and cotton dust waste (CDW) from weaving in their natural or chemically modified forms. The inclusion of quaternary amino groups (DEAE+) and methylcarboxylic (CM-) in the CDW cellulosic structure generates an ion exchange capacity in these formerly inert matrix and, consequently, consolidates its ability for electrovalent adsorption of residual textile dyes. The obtained ionic matrices were evaluated for pHpcz, the retention efficiency for various textile dyes in different experimental conditions, such as initial concentration , temperature, contact time in order to determine the kinetic and thermodynamic parameters of adsorption in batch, turning comprehensive how does occur the process, then understood from the respective isotherms. It was observed a change in the pHpcz for CM--CDW (6.07) and DEAE+-CDW (9.66) as compared to the native CDW (6.46), confirming changes in the total surface charge. The ionized matrices were effective for removing all evaluated pure or residual textile dyes under various tested experimental conditions. The kinetics of the adsorption process data had best fitted to the model a pseudosecond order and an intraparticle diffusion model suggested that the process takes place in more than one step. The time required for the system to reach equilibrium varied according to the initial concentration of dye, being faster in diluted solutions. The isotherm model of Langmuir was the best fit to the experimental data. The maximum adsorption capacity varied differently for each tested dye and it is closely related to the interaction adsorbent/adsorbate and dye chemical structure. Few dyes obtained a linear variation of the balance ka constant due to the inversion of temperature and might have influence form their thermodynamic behavior. Dyes that could be evaluated such as BR 18: 1 and AzL, showed features of an endothermic adsorption process (ΔH° positive) and the dye VmL presented exothermic process characteristics (ΔH° negative). ΔG° values suggested that adsorption occurred spontaneously, except for the BY 28 dye, and the values of ΔH° indicated that adsorption occurred by a chemisorption process. The reduction of 31 to 51% in the biodegradability of the matrix after the dye adsorption means that they must go through a cleaning process before being discarded or recycled, and the regeneration test indicates that matrices can be reused up to five times without loss of performance. The DEAE+-CDW matrix was efficient for the removal of color from a real textile effluent reaching an UV-Visible spectral area decrease of 93% when applied in a proportion of 15 g ion exchanger matrix L-1 of colored wastewater, even in the case of the parallel presence of 50 g L-1 of mordant salts in the waste water. The wide range of colored matter removal by the synthesized matrices varied from 40.27 to 98.65 mg g-1 of ionized matrix, obviously depending in each particular chemical structure of the dye upon adsorption.

Gestão da cadeia de suprimento e vantagem competitiva: uma análise em setores industriais a partir da visão relacional

This work has as its main purpose to investigate the contribution of supply chain management in order to obtain competitive advantage by companies from the textile industry and from Ceará footwear industry, focusing its analysis mainly in the interorganizational relations (dyadic). For this, the theoretical referential contemplates different explanatory streams of the competitive advantage, detaching the relational perception of the resources theory, as well as, the main presuppositions of the supply chain management which culminates with the development of an analysis sample that runs the empirical study; the one which considers an expanded purpose of the supply chain which includes the government and the abetment institutions as institutional environment representatives. Besides supply chain management consideration as a competitive advantage source, the work also tried to identify other possible competitive advantage sources for the companies of the investigated sectors. It represents a study of multiple interpretive cases, having four cases as a total; meaning two cases in each one of the sectors, which used as a primary data collecting instrument a semi-structured interview schedule. Different methods were used for the data analysis, the content analysis and the constant comparison methods, the analytical procedure originated from the grounded theory research strategy, which were applied the Atlas/ti software recourse. Considering the theoretical referential and the used analysis sample, four basic categories of the work were defined, including its respective proprieties and dimensions: (1) characteristics concerning to the relationship with the supplier; (2) the company relations with the government; (3) the company relations with the abetment institutions and; (4) obtaining sources of competitive advantage. In general, the applied research in the footwear sector revealed that in the relationships of the researched companies related to its suppliers, there is a predominance of the partnership system and the main presuppositions of the supply chain management are applied which contributes for the acquisition of the relational competitive advantage; while in the textile sector, only some of these presuppositions are applied, with little contribution for the relational competitive advantage. The main resource which was accessed by the companies in both sectors through its relationships with the government and the abetment institutions are the tax incentives which, for the footwear companies, contribute for the acquisition of the temporary competitive advantage in relation to the contestants who do not own productive installations in the Northeast region, it also conducts to a competitive parity situation in relation to the contestants who own productive installations in the Northeast region and to the external market contestants; while for the companies of the textile sector, the tax incentives run the companies to a competitive parity situation in relation to its contestants. Furthermore, the investigated companies from the two sectors possess acquisition sources of the competitive advantage which collimate with different explanatory streams (industrial analysis, resources theory, Austrian school and the dynamic capabilities theory), although there is a predominance of the product innovation as a competitive advantage source in both sectors, due to the bond of these with the fashion tendencies

Contribuições da inserção musical para a qualidade de vida no trabalho em ambiente laboral fabril

The present thesis aimed at understanding how the insertion of music in the work environment contributes to achieving Quality of Work Life. - QWL, under the perspective of biopsychosocial and organizational well-being. As to music insertion we considered the theoretical-empirical perception about how music is inserted at work and its functions on such place. The context where the study was taken was the manufacturing area of a major textile company, located in Natal, state of Rio Grande do Norte, Brazil, in which music is used during labor activities. The only study case was the research strategy adopted, with exploratory and descriptive purposes. The primary data were collected through the focus group technique, applied to the collaborator in the manufacturing sector. The semi-structured interview was done as a complementary tool, directed to the supervisor in that sector. Respecting the theoretical saturation criterion, we formed four focus groups, each one composed of eight members randomly selected, among the seventy-six collaborators in the sector. The data were analyzed qualitatively, through the content analysis technique, more specifically the category analysis. We identified twenty-eight QWL attributes. Six of them were found present in the four focus groups and in the interview. Among these ones, the attribute of Interpersonal Relationship at Work, contemplating the Psychological and Organizational dimensions, was the only one anticipated in four out of fifteen theoretical models here listed. The attribute Music at Work Environment could be inserted in the four QWL dimensions, highlighting the power and relevance of this attribute for the research participants. The way music has been inserted in the labor environment contributes to promoting well-being at work, which goes against theoretical conceptions, especially when it comes to musical genre. We identified nine functions of music at work, among which, Improving Work Conditions, Improving Interpersonal Relationship at Work and Favoring Motivation for Work had to be emphasized for being associated to three QWL attributes. In the total, we highlighted seven associations. The most affected QWL dimension through the insertion of music at work was the Psychological one, followed by the Organizational one. We conclude that music insertion provides biological, social and, above all, psychological and organizational well-being to the contributors, thus contributing to obtaining QWL at the labor environment researched. However, we should consider the context and proceed to periodical plans and adjustments in the way of music insertion so as to avoid health and well-being problems to those people at work

Emissão de C-CO2 em solo tropical suplementado com lodo de esgoto.

Lodos de esgoto possuem alto teor de carbono orgânico, porém, há um expressivo consumo de matéria orgânica logo após sua aplicação no solo, resultando novo equilíbrio da relação C/N. Se parte da matéria orgânica presente no lodo de esgoto for resistente à degradação e não inibir a atividade microbiana, o teor de carbono orgânico no solo poderá aumentar. Em solo agrícola, esse efeito pode ser considerado positivo se houver melhorias em sua qualidade e potencial produtivo, sem qualquer prejuízo ambiental. A persistência de carbono orgânico no solo pode ser avaliada medindo-se as taxas de degradação do lodo de esgoto pela atividade microbiana do solo. Esta análise faz parte da caracterização qualitativa e quantitativa de lodo de esgoto, exigida na legislação para disposição em solos agrícolas. O presente trabalho teve como objetivo avaliar a decomposição de lodo de esgoto aplicado a um latossolo, medindo-se a emissão de CO2. Os tratamentos estudados foram de 1, 2, 4 e 8 vezes a aplicação da dose recomendada na legislação atual, com base no teor de N, além de um tratamento com adubação mineral NPK e um tratamento testemunha. Avaliaram-se dois lodos de esgoto, um de origem urbana (Franca/SP) e um de origem urbano-industrial (Barueri/SP). As doses de lodo de esgoto foram equivalentes à aplicação, numa camada de 0-20 cm de profundidader, de 3, 6, 12 e 24 Mg ha -1 (Franca) e de 8, 16, 32 e 64 Mg ha -1 (Barueri/SP). O solo estudado foi um Latossolo Vermelho distroférrico. Avaliou-se o efeito dos tratamentos sobre a emissão de carbono na forma de CO2, em câmaras sem circulação forçada de ar, durante 57 dias de incubação. O padrão de emissão de C-CO2 foi semelhante nos dois tipos de lodo de esgoto. Concluiu-se que as doses utilizadas ou os tipos de lodo de esgoto não afetaram a biodecomposição da matéria orgânica aplicada ao solo a qual foi estimada em 15 %.

Mineralização de compostos nitrogenados após aplicações de lodos de esgoto em quatro cultivos de milho.

O teor de N disponível em solos tratados com lodo de esgoto é um dos fatores restritivos à aplicação do resíduo em grandes volumes na agricultura, e deve ser utilizado nas normas que regulamentam seu uso agrícola com o fim de evitar a contaminação ambiental do solo e corpos d?água com nitrato. Quando se aplica o resíduo pela primeira vez em um solo, a disponibilização de N mineral a partir de compostos orgânicos naturais do solo não é diretamente considerada no cálculo da taxa de aplicação máxima, e este procedimento é comum também nas recomendações de adubação mineral. Porém, a aplicação continuada desses resíduos pode causar efeitos residuais acumulativos na geração de N mineral, o que implicaria recomendações específicas para reaplicações em uma mesma área. O objetivo deste trabalho foi avaliar a disponibilidade potencial de N mineral em um Latossolo previamente tratado com lodos de esgoto e com quatro cultivos sucessivos de milho. Amostras de solo da camada de 0?20 cm foram coletadas em subparcelas de um experimento realizado em campo, entre 1999 e 2002, em Jaguariúna (SP), onde foram aplicados 0, 14.716, 29.432, 58.864 e 117.728 kg ha-1 de lodo de origem urbana (Franca, SP) e 0, 22.700, 45.400, 90.800 e 181.600 kg ha-1 de lodo produzido a partir de esgotos urbanos e industriais (Barueri, SP). As doses foram parceladas em quatro aplicações anuais consecutivas. Em laboratório, essas amostras foram incubadas durante 15 semanas. As análises iniciais dos solos evidenciaram que houve efeito residual das aplicações prévias dos lodos sobre o acúmulo de N orgânico e de nitrato. No final da incubação, houve acúmulo de N inorgânico no solo e diminuição do pH em função da maior geração de nitrato com as doses crescentes dos lodos de esgoto. O potencial de mineralização estimado pelo modelo exponencial simples foi de 28 mg kg-1 de N no tratamento sem lodo, e crescente, de 28 para 100 mg kg-1 de N, nos tratamentos com lodo de Franca, e de 40 para 113 mg kg-1 de N tratamentos com lodo de Barueri. Concluiu-se que os efeitos residuais acumulados no solo devem ser considerados quando se pretender fazer novas aplicações de lodos de esgoto num mesmo local. Os potenciais de mineralização de compostos de N do solo e do lodo que será utilizado, além do acúmulo de nitrato no perfil do solo, devem ser determinados e considerados para o cálculo da dose da próxima aplicação.

Mineralização de compostos nitrogenados de lodos de esgoto na quinta aplicação em latossolo.

Em sistemas agrícolas em que se aplica lodo de esgoto, devem ser consideradas as necessidades de N das plantas e, simultaneamente, evitar a geração de excesso de nitrato, poluente potencial de águas subsuperficiais. Para isso, na determinação das quantidades máximas a serem aplicadas em determinado cultivo, devem-se conhecer algumas propriedades do lodo de esgoto e do solo. Uma delas é a fração de mineralização de compostos nitrogenados orgânicos (FMN) contidos nos resíduos que serão mineralizados durante o ciclo da cultura. Essa quantidade, somada ao N na forma mineral contido no lodo, fornece a quantidade de N do lodo de esgoto que ficará disponível durante a safra. Este trabalho teve como objetivo determinar se as aplicações anteriores de lodo de esgoto, feitas em um Latossolo, alteram a FMN do resíduo recentemente aplicado. O solo foi previamente tratado, em quatro cultivos sucessivos de milho, com quatro doses e dois tipos de lodo de esgoto, um de origem urbana (Franca, SP) e outro de origem urbano-industrial (Barueri, SP). O experimento de mineralização foi instalado em laboratório, com delineamento experimental em blocos casualizados e três repetições, realizado durante 15 semanas. As doses dos lodos de esgoto estudadas, na quinta aplicação, corresponderam a 160, 320, 640 e 1.280 mg kg-1 de N orgânico. Em sete épocas, foram determinados o pH e os teores de N nas formas amoniacal e nítrica. A FMN foi calculada com os dados obtidos para a mineralização líquida medida 105 dias após o início da incubação. Os comportamentos dos dois tipos de lodo foram similares, com taxa de mineralização inicial elevada. Os teores de amônio mantiveram-se baixos logo após o início da incubação até o final, com aumento linear nos teores de nitrato. Houve maior acúmulo de nitrato para as maiores doses aplicadas. O potencial de mineralização dos tratamentos, estimado pelo modelo exponencial simples, variou entre 58 e 284 mg kg-1 de N. Não houve efeito das quantidades de resíduos previamente aplicadas ao Latossolo sobre a ração de mineralização do N orgânico recentemente aplicado via lodo de esgoto, com confiabilidade de 95 %. Os resultados mostraram que, em reaplicações na mesma área, as doses de lodo de esgoto devem ser menores do que as doses calculadas para aplicação única, devido ao N residual acumulado no solo, tanto na forma orgânica quanto inorgânica.

Efeito de lodo de esgoto sobre patógenos habitantes do solo e severidade de oídio da soja.

O lodo de esgoto, atendendo as exigências ambientais, apresenta potencial para disposição em solos agrícolas. Sua incorporação altera as propriedades químicas, físicas e biológicas do solo, pois é rico em macro e micronutrientes e matéria orgânica. Estas alterações podem proporcionar benefícios como aumento da disponibilidade de nutrientes às culturas, indução de supressividade a fitopatógenos habitantes do solo e de resistência às doenças da par te aérea. Por outro lado, pode influenciar negat ivamente o equilíbrio biológico e químico no solo, devido à presença de contaminantes. O objetivo do trabalho foi avaliar os efeitos da incorporação de lodo de esgoto ao solo sobre a severidade de oídio (Erysiphe diffusa) e na supressividade a Rhizoctonia solani e a Macrophomina phaseolina da soja (Glycine max) . Para tanto, foram ut i l izados solos que receberam quat ro aplicações (1999 a 2001) sucessivas de lodos de esgoto originários das Estações de Tratamento de Esgoto de Barueri e de Franca, SP, nas concent rações de 0, 1, 2, 4 e 8 vezes (0N a 8N) a dose de N recomendada para a cultura do milho. Os estudos com oídio foram real izados em casa de vegetação com inoculação natural em dois cultivos sucessivos de soja. Também foi estudado o efeito de substrato produzido com 0%, 2,5%, 5% 10%, 15% e 20% de lodo de Franca sobre a emergência de plântulas e sobre a severidade de oídio da soja em três e dois ciclos, respectivamente. Nos estudos com R. solani e M. phaseol ina, os solos foram ar t i ficialmente infestados com os patógenos e posteriormente cultivados com soja por dois ciclos, sendo avaliado o tombamento e a severidade das doenças. A aplicação de lodo de esgoto no solo aumentou a atividade eliciadora de fitoalexinas em soja e a sever idade do oídio foi inversamente proporcional às concentrações do lodo, tanto no estudo com o solo de campo, como com o subst rato obt ido com o lodo de Franca. A emergência das plântulas de soja, nos três cultivos, foi inversamente proporcional à concent ração do lodo de Franca, sendo totalmente inibida na concent ração de 20%. Nos estudos com R. solani não foram observados efeitos da apl icação do lodo da ETE de Franca sobre o tombamento e a sever idade. No pr imei ro cul t ivo a resposta ao tombamento foi quadrática para o lodo Barueri , sendo que ocorreu aumento nas concentrações de 1N e 2N, e redução na concentração 4N. No segundo cultivo ocorreu aumento nos índices de tombamento de plantas em relação ao primeiro, com resposta quadrática para o lodo Barueri, mas com ponto de inflexão mínimo na concentração de 1N, sendo que para a concentração 8N o tombamento foi semelhante à testemunha. A severidade da doença no colo das plantas manteve a mesma resposta quadrática para o lodo de Barueri nos dois cultivos, com ponto de máximo na dose 4N. Para M. phaseolina a incidência da doença foi inversamente proporcional à concent ração do lodo de Franca. Dessa forma, os resultados não permitem conclusão sobre a indução de supressividade à R. solani e M. phaseolina.

Lixiviação de nitrogênio em Latossolo incubado com lodo de esgoto.

Lodo de esgoto contém teores elevados de N orgânico. Se for aplicado em quantidade excessiva em solos, há risco de poluição de águas subsuperficiais com nitrato, produto da mineralização do N. Por essa razão, um dos critérios agronômicos para a determinação da taxa máxima de aplicação do lodo de esgoto é a quantidade de N mineral que será disponibilizada às culturas. Neste trabalho, são apresentados os resultados relativos à lixiviação de N mineralizado em um Latossolo Vermelho distroférrico incubado durante 224 dias com dois tipos de lodo de esgoto anaeróbios, um de origem urbana (Franca, SP) e outro com presença de despejos industriais (Barueri, SP). Cada lodo de esgoto foi aplicado em quatro doses, contendo 0,13, 0,3, 0,5 e 1,0 g kg-1 de N orgânico. Essa quantidade de substrato mineralizável foi equivalente a 5, 11, 22 e 43 t ha-1 de lodo de Franca, e a 8, 15, 31 e 61 t ha-1 de lodo de Barueri. O experimento foi conduzido em colunas de percolação, sob temperatura de 25 a 28 °C em laboratório, fazendo-se lixiviações com solução extratora de KCl 0,01 mol L-1. Foram determinadas as quantidades de N mineral (N-NH4 + e N-NO3 - + N-NO2 - ) extraídas nos percolados em doze épocas. Houve correlação significativa entre as quantidades aplicadas de N na forma orgânica e as quantidades de N mineralizadas durante a incubação nos dois tipos de lodo avaliados. O potencial de mineralização estimado pelo modelo exponencial simples foi de 73 mg kg-1 de N no solo sem aplicação de lodo, e aumentou de 107 para 224 mg kg-1 e de 132 para 364 mg kg-1 nos tratamentos com o lodo de esgoto de Franca e de Barueri, respectivamente. A fração de mineralização potencial do N orgânico dos dois tipos de lodo de esgoto decresceu com o aumento das doses aplicadas: 26, 25, 21 e 14 % para o de Franca, e 43, 39, 34 e 27 % para o de Barueri. Em consequência, o potencial de lixiviação de N no Latossolo aumentou de 46 para 207 % com as doses do lodo de Franca, e de 81 para 399 % com as doses do lodo de Barueri.