High performance polyester-based materials

Biaxially oriented films produced from semi-crystalline, semi-aromatic polyesters are utilised extensively as components within various applications, including the specialist packaging, flexible electronic and photovoltaic markets. However, the thermal performance of such polyesters, specifically poly(ethylene terephthalate) (PET) and poly(ethylene-2,6-naphthalate) (PEN), is inadequate for several applications that require greater dimensional stability at higher operating temperatures. The work described in this project is therefore primarily focussed upon the copolymerisation of rigid comonomers with PET and PEN, in order to produce novel polyester-based materials that exhibit superior thermomechanical performance, with retention of crystallinity, to achieve biaxial orientation. Rigid biphenyldiimide comonomers were readily incorporated into PEN and poly(butylene-2,6-naphthalate) (PBN) via a melt-polycondensation route. For each copoly(ester-imide) series, retention of semi-crystalline behaviour is observed throughout entire copolymer composition ratios. This phenomenon may be rationalised by cocrystallisation between isomorphic biphenyldiimide and naphthalenedicarboxylate residues, which enables statistically random copolymers to melt-crystallise despite high proportions of imide sub-units being present. In terms of thermal performance, the glass transition temperature, Tg, linearly increases with imide comonomer content for both series. This facilitated the production of several high performance PEN-based biaxially oriented films, which displayed analogous drawing, barrier and optical properties to PEN. Selected PBN copoly(ester-imide)s also possess the ability to either melt-crystallise, or form a mesophase from the isotropic state depending on the applied cooling rate. An equivalent synthetic approach based upon isomorphic comonomer crystallisation was subsequently applied to PET by copolymerisation with rigid diimide and Kevlar®-type amide comonomers, to afford several novel high performance PET-based copoly(ester-imide)s and copoly(ester-amide)s that all exhibited increased Tgs. Retention of crystallinity was achieved in these copolymers by either melt-crystallisation or thermal annealing. The initial production of a semi-crystalline, PET-based biaxially oriented film with a Tg in excess of 100 °C was successful, and this material has obvious scope for further industrial scale-up and process development.

Pharmacophore-based 3D QSAR studies on a series of high affinity 5-HT(1A) receptor ligands

5-HT(1A) receptor antagonists have been employed to treat depression, but the lack of structural information on this receptor hampers the design of specific and selective ligands. In this study, we have performed CoMFA studies on a training set of arylpiperazines (high affinity 5-HT(1A) receptor ligands) and to produce an effective alignment of the data set, a pharmacophore model was produced using Galahad. A statistically significant model was obtained, indicating a good internal consistency and predictive ability for untested compounds. The information gathered from our receptor-independent pharmacophore hypothesis is in good agreement with results from independent studies using different approaches. Therefore, this work provides important insights on the chemical and structural basis involved in the molecular recognition of these compounds. (C) 2010 Elsevier Masson SAS. All rights reserved.

Ability of Ru complexes for ROMP tuned through a combination of phosphines and amines

Polynorbonerne with high molecular weight was obtained via ring opening metathesis polymerization using catalysts derived from [RuCl(2)(PPh(2)Bz)(2) L] (1 for L = PPh(2) Bz; 2 for L = piperidine) type of complexes when in the presence of ethyl diazoacetate in CHCl(3). The polymer precipitated within a few minutes at 50 degrees C when using 1 with ca. 50% yield ([NBE]/[Ru] = 5000). Regarding 2, for either 30 min at 25 C or 5 min at 50 degrees C, more than 90% of yields are obtained; and at 50 C for 30 min a quantitative yield is obtained. The yield and PDI values are sensitive to the [NBE]/[Ru] ratio. The reaction of 1 with either isonicotinamide or nicotinamide produces six-coordinated complexes of [RuCl(2)(PPh(2)Bz)(2)(L)(2)] type, which are almost inactive and produce only small amounts of polymers at 50 C for 30 min. Thus, we Concluded that the novel complexes show very distinct reactivities for ROMP of NBE. This has been rationalized on account of a combination of synergistic effects of the phosphine-amine ancillary ligands. (C) 2009 Elsevier B.V. All rights reserved.

Pupils' Interaction with the Exhibits According to the Learning Behaviour Model

Science centres are one of the best opportunities for informal study of natural science. There are many advantages to learn in the science centres compared with the traditional methods: it is possible to motivate and supply visitors with the social experience, to improve people’s understandings and attitudes, thereby bringing on and attaching wider interest towards natural science. In the science centres, pupils show interest, enthusiasm, motivation, self-confidence, sensitiveness and also they are more open and eager to learn. Traditional school-classes however mostly do not favour these capabilities. This research presents the qualitative study in the science centre. Data was gathered from observations and interviews at Science North science centre in Canada. Pupils’ learning behaviours were studied at different exhibits in the science centre. Learning behaviours are classified as follows: labels reading, experimenting with the exhibits, observing others or exhibit, using guide, repeating the activity, positive emotional response, acknowledged relevance, seeking and sharing information. In this research, it became clear that in general pupils do not read labels; in most cases pupils do not use the guides help; pupils prefer exhibits that enable high level of interactivity; pupils display more learning behaviours at exhibits that enable a high level of interactivity.

Role of knowledge and ability in student nurses` clinical decision-making

Little is known about the acquisition of decision-making skills in nursing students as a function of experience and academic ability. Knowing how experience and academic skills interact may help inform clinical education programs and formulate ways of assessing students' progress. The aims of the present study were to develop a problem-solving task capable of measuring clinical decision-making skills in novice nurses at different levels of domain-specific knowledge; and to establish the relative impact on decision-making of domain-specific knowledge and general ability as determinants of the acquisition of decision-making skills. Three types of clinical problems of increasing complexity were developed. Sixty second-year and third-year student nurses with high and low academic scores were studied in terms of their ability to generate hypotheses for a hypothetical case, recognize disconfirming information and the need to access additional information, and diagnostic accuracy. The results showed that general academic ability and knowledge function partly independently in the acquisition of expertise in nursing. Academic ability affects decision-making in low complexity tasks, but as case complexity increases, domain-specific knowledge and experience determines decision-making skills. There are important differences in the way novices with different levels of knowledge and ability make clinical decisions and these can be studied by systematically increasing the complexity of the decision task. These results have implications for the way in which clinical education is structured and evaluated.

Composition dependency of the glass forming ability (GFA) in Mg—Ni—Si system by mechanical alloying

The pure elemental powder mixtures with the compositions of Mg₆₅Ni_xSi₃₅−_x (x = 10, 20, 25, 33 at.%) were subject to high-energy ball mill, and the structures of the mixtures at different intervals of milling were characterised by X-ray diffraction (XRD). The compositional dependency of the glass forming ability (GFA) in Mg–Ni–Si system was evaluated based on the experimental results and the theoretical calculation. The compositional dependency of GFA in Mg–Ni–Si system can be understood well by comparing the enthalpies of the crystalline and amorphous phases based on the Miedema's theory for the formation enthalpy of alloys. Increasing the Ni/Mg ratio and/or decreasing Si content can improve the amorphous formability. The calculation results might be of great help in optimising the composition with high GFA in Mg–Ni–Si system.

Food utilisation and digestive ability of aquatic and semi-terrestrial crayfishes, Cherax destructor and Engaeus sericatus (Astacidae, Parastacidae)

Both Engaeus sericatus and Cherax destructor are omnivorous crayfishes consuming a variety of food items. Materials identified in the faeces of both E. sericatus and C. destructor consisted of mainly plant material with minor amounts of arthropod animals, algae and fungi. The morphology of the gastric mill of C. destructor suggests that it is mainly involved in crushing of food material while the gastric mill of E. sericatus appears to be better suited to cutting of food material. Given this, the gastric mill of E. sericatus may be better able to cut the cellulose and hemicellulose fibres associated with fibrous plant material. In contrast, the gastric mill of C. destructor appears to be more efficient in grinding soft materials such as animal protein and algae. Both species accumulated high amounts of lipids in their midgut glands (about 60% of the dry mass) which were dominated by triacylglycerols (81–82% of total lipids). The dominating fatty acids were 16:0, 16:1(n-7), 18:1(n-9), 18:2(n-6), and 18:3(n-3). The two latter fatty acids can only be synthesised by plants, and are thus indicative of the consumption of terrestrial plants by the crayfishes. The similarity analysis of the fatty acid patterns showed three distinct clusters of plants and each of the crayfish species. The complement of digestive enzymes, proteinases, total cellulase, endo-β-1,4-glucanase, β-glucosidase, laminarinase and xylanase within midgut gland suggests that both C. destructor and E. sericatus are capable of hydrolysing a variety of substrates associated with an omnivorous diet. Higher activities of total cellulase, endo-β-1,4-glucanase and β-glucosidase indicate that E. sericatus is better able to hydrolyse cellulose within plant material than C. destructor. In contrast to E. sericatus, higher total protease and N-acetyl-β-d-glucosaminidase activity in the midgut gland of C. destructor suggests that this species is better able to digest animal materials in the form of arthropods. Differences in total cellulase and gastric mill morphology suggest that E. sericatus is more efficient at digesting plant material than C. destructor. However, the contents of faecal pellets and the fatty acid compositions seem to indicate that both species opportunistically feed on the most abundant and easily accessible food items.

Effects of sublethal fenitrothion ingestion on cholinesterase inhibition, standard metabolism, thermal preference, and prey-capture ability in the Australian central bearded dragon (Pogona vitticeps, Agamidae)

The central bearded dragon (Pogona vitticeps) is a medium-sized lizard that is common in semiarid habitats in Australia and that potentially is at risk of fenitrothion exposure from use of the chemical in plague locust control. We examined the effects of single sublethal doses of this organophosphate (OP; low dose = 2.0 mg/kg; high dose = 20 mg/kg; control = vehicle alone) on lizard thermal preference, standard metabolic rate, and prey-capture ability. We also measured activities of plasma total cholinesterase (ChE) and acetylcholinesterase before and at 0, 2, 8, 24, 120, and 504 h after OP dosing. Predose plasma total ChE activity differed significantly between sexes and averaged 0.66 ± 0.06 and 0.45 ± 0.06 μmol/min/ml for males and females, respectively. Approximately 75% of total ChE activity was attributable to butyrylcholinesterase. Peak ChE inhibition reached 19% 2 h after OP ingestion in the low-dose group, and 68% 8 h after ingestion in high-dose animals. Neither OP doses significantly affected diurnal body temperature, standard metabolic rate, or feeding rate. Plasma total ChE levels remained substantially depressed up to 21 d after dosing in the high-dose group, making this species a useful long-term biomonitor of OP exposure in its habitat.

Use of high resolution digital multi-spectral imagery to assess the distribution of disease caused by Phytophthora cinnamomi on heathland at Anglesea, Victoria

Disease caused by the soilborne plant pathogen Phytophthora cinnamomi causes long-term floristic and structural changes in native vegetation communities in Australia. Key components of the management of this disease are to know where it occurs and the rate at which it spreads. The distribution of P. cinnamomi has generally been assessed as locality points of infestation and mapping the extent of diseased vegetation in any area is difficult and costly. This study was undertaken in P. cinnamomi-infested heathland communities in southern Victoria, Australia, where the symptoms of P. cinnamomi arise as a mosaic within healthy vegetation. We investigated the potential to improve the efficiency and effectiveness of mapping and monitoring vegetation affected by P. cinnamomi using digital multi-spectral imaging. This technique was developed for the purposes of monitoring vegetation and provides a single, seamless ortho-rectified digital image over the total area of interest. It is used to spatially quantify small differences in the characteristics of vegetation. In this study, the symptoms of disease caused by P. cinnamomi infestation were related to differences in the imagery and were used to map areas of infestation. Comparison of the digital multi-spectral imaging indications with on-ground observations gave moderate accuracy between the datasets (κ = 0.49) for disease and healthy indications. This study demonstrates the ability of the technique to determine disease extent over broad areas in native vegetation and provides a non-invasive, cost effective tool for management.

Can the ABCD Score be dichotomised to identify high−risk patients with trainsient ischaemic attack in the emergency department?

Background: Recent evidence shows a substantial short-term risk of ischaemic stroke after transient ischaemic attack (TIA). Identification of patients with TIA with a high short-term risk of stroke is now possible through the use of the “ABCD Score”, which considers age, blood pressure, clinical features and duration of symptoms predictive of stroke.

Aim: To evaluate the ability of dichotomising the ABCD Score to predict stroke at 7 and 90 days in a population with TIA presenting to an emergency department.

Methods: A retrospective audit was conducted on all probable or definite TIAs presenting to the emergency department of a metropolitan hospital from July to December 2004. The ABCD Score was applied to 98 consecutive patients with TIA who were reviewed for subsequent strokes within 90 days. Patients obtaining an ABCD Score ≥5 were considered to be at high risk for stroke.

Results: Dichotomising the ABCD Score categorised 48 (49%) patients with TIA at high risk for stroke (ABCD Score ≥5). This high-risk group contained all four strokes that occurred within 7 days (sensitivity 100% (95% confidence interval (CI) 40% to 100%), specificity 53% (95% CI 43% to 63%), positive predictive value 8% (95% CI 3% to 21%) and negative predictive value 100% (95% CI 91% to 100%)), and six of seven occurring within 90 days (sensitivity 86% (95% CI 42% to 99%), specificity 54% (95% CI 43% to 64%), positive predictive value 12.5% (95% CI 5% to 26%) and negative predictive value 98% (95% CI 88% to 100%)). Removal of the “age” item from the ABCD Score halved the number of false-positive cases without changing its predictive value for stroke.

Conclusion: In this retrospective analysis, dichotomising the ABCD Score was overinclusive but highly predictive in identifying patients with TIA at a high short-term risk of stroke. Use of the ABCD Score in the emergency care of patients with TIA is simple, efficient and provides a unique opportunity to prevent stroke in this population of patients.

Anomalous evaporation behavior of ZnO powder milled mechanically under high-energy conditions

ZnO powder showed anomalous evaporation behavior after its mechanical milling treatment under high-energy conditions. The amount of generated vapor is about 10 times higher in the first 15 min of annealing at 1300 °C than that of unmilled ZnO powders. The strong ball impacts are responsible for the greatly enhanced evaporation ability. Low-energy ball milling involving shearing actions and rare weak impacts leads only to a small evaporation rate enhancement. The possible explanation of the high evaporation rate of the heavily milled material is the existence of large fraction of weakly bonded atoms in grain boundaries, surface defects and strained areas.

From ‘consulting pupils’ to ‘pupils as researchers’ : a situated case narrative

Schools in England are now being encouraged to 'personalise' the curriculum and to consult students about teaching and learning. This article reports on an evaluation of one high school which is working hard to increase student subject choice, introduce integrated curriculum in the middle years and to improve teaching and learning while maintaining a commitment to inclusive and equitable comprehensive education. The authors worked with a small group of students as consultants to develop a 'student's-eye' set of evaluative categories in a school-wide student survey. They also conducted teacher, student and governor interviews, lesson and meeting observations, and student 'mind-mapping' exercises. In this article, in the light of the findings, the authors discuss the processes they used to work jointly with the student research team, and how they moved from pupils-as-consultants to pupils-as-researchers, a potentially more transformative/disruptive practice. They query the notion of 'authentic student voice' and show it as discursive and heterogeneous: they thus suggest that both a standards and a rights framings of student voice must be regarded critically.

Factors that predict work ability : incorporating a measure of organisational values towards ageing

This research conducted in an Australian public sector organisation aimed to identify the main factors that predict work ability for employees. According to Ilmarinen's (1999) model of work ability, an individual's work ability is influenced by their general health, attitudes, values and motivation interacting with workplace and other environmental demands. However what is unknown is the influence of value incongruence (i.e. the lack of fit between individual and organisational values), particularly when that incongruence results in age discrimination. This is important in an Australian context where youth and symbols of youth are over-valued in business environments and where older workers themselves perceive age discrimination as the single most important cause of early exit from the labour force.

109 participants completed a survey about work ability. Differences between work ability and health were not found between older and younger workers suggesting that strategies for improving work ability could be targeted at all employees rather than just older employees. However there were significant differences found between older and younger workers on reasons that would influence employees to stay longer in the organisation. Older workers tended to be more influenced by the provision of less demanding work, and positive attitudes towards older workers. Younger workers tended to be more influenced by opportunities to be employed in another section of the organisation, skills training opportunities and career advancement opportunities.

Results from hierarchical regression analyses suggested that good physical and mental health, and low occupational stress related to workplace culture were significant predictors of increased work ability. Results also suggested that occupational stress is likely to decrease with: high work ability and work satisfaction; and high value congruence. Implications for wellbeing programs to include the development of targeted organisational values are discussed.

Novel high salt content polymer electrolytes based on high Tg polymers

Conductivities greater than or equal to 10⁻⁸ S cm⁻¹ at T_g are reported in polymer electrolytes based on lithium triflate salt and a series of polymers whose T_g is greater than 90°C. The highest conductivities were observed for poly(acrylonitrile) based systems with salt concentrations greater than 60 wt.%. The conductivity in all cases investigated increases with increasing salt concentration. ¹H-NMR T₂ relaxation measurements suggest that T_g decreases with increasing salt content and confirms that these materials are glassy at room temperature and hence that the conductivity is significantly decoupled from the structural relaxations. It appears that the nature of the polymer is important in determining the level of ionic conductivity, possibly due to differences in polymer coordinating ability or differences in T_g. Polymer-in-salt mixtures based on a tetra-alkyl ammonium imide molten salt and several high T_g polymers are also reported. The conductivities of these mixtures appear to be independent of the polymer type.

Recognising and monitoring high-level behaviours in complex spatial environments

The recognition of activities from sensory data is important in advanced surveillance systems to enable prediction of high-level goals and intentions of the target under surveillance. The problem is complicated by sensory noise and complex activity spanning large spatial and temporal extents. This paper presents a system for recognising high-level human activities from multi-camera video data in complex spatial environments. The Abstract Hidden Markov mEmory Model (AHMEM) is used to deal with noise and scalability The AHMEM is an extension of the Abstract Hidden Markov Model (AHMM) that allows us to represent a richer class of both state-dependent and context-free behaviours. The model also supports integration with low-level sensory models and efficient probabilistic inference. We present experimental results showing the ability of the system to perform real-time monitoring and recognition of complex behaviours of people from observing their trajectories within a real, complex indoor environment.