GREEN MACHINING ORIENTED TO DIMINISH DENSITY GRADIENT FOR MINIMIZATION of DISTORTION IN ADVANCED CERAMICS

After sintering advanced ceramics, there are invariably distortions, caused in large part by the heterogeneous distribution of density gradients along the compacted piece. To correct distortions, machining is generally used to manufacture pieces within dimensional and geometric tolerances. Hence, narrow material removal limit conditions are applied, which minimize the generation of damage. Another alternative is machining the compacted piece before sintering, called the green ceramic stage, which allows machining without damage to mechanical strength. Since the greatest concentration of density gradients is located in the outer-most layers of the compacted piece, this study investigated the removal of different allowance values by means of green machining. The output variables are distortion after sintering, tool wear, cutting force, and the surface roughness of the green ceramics and the sintered ones. The following results have been noted: less distortion is verified in the sintered piece after 1mm allowance removal; and the higher the tool wear the worse the surface roughness of both green and sintered pieces.

Attitude stability of artificial satellites subject to gravity gradient torque

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Levenberg-Marquardt application to two-phase nonlinear parameter estimation for finned-tube coil evaporators

A procedure for calculation of refrigerant mass flow rate is implemented in the distributed numerical model to simulate the flow in finned-tube coil dry-expansion evaporators, usually found in refrigeration and air-conditioning systems. Two-phase refrigerant flow inside the tubes is assumed to be one-dimensional, unsteady, and homogeneous. In themodel the effects of refrigerant pressure drop and the moisture condensation from the air flowing over the external surface of the tubes are considered. The results obtained are the distributions of refrigerant velocity, temperature and void fraction, tube-wall temperature, air temperature, and absolute humidity. The finite volume method is used to discretize the governing equations. Additionally, given the operation conditions and the geometric parameters, the model allows the calculation of the refrigerant mass flow rate. The value of mass flow rate is computed using the process of parameter estimation with the minimization method of Levenberg-Marquardt minimization. In order to validate the developed model, the obtained results using HFC-134a as a refrigerant are compared with available data from the literature.

Temporal and spatial variability in the macrozoobenthic community along a salinity gradient in the Castillos Lagoon (Uruguay)

The macrozoobenthic community of the Castillos Lagoon system (East Coast of Uruguay) was sampled during autumn, winter, spring and summer of 1991, in order to describe the community structure and the spatial and temporal patterns of distribution. Eleven sampling stations were distributed along a salinity gradient in a north-south direction (8 replicates were collected at each station). The maximum density of organisms was found at the central part of the lagoon (stations 6 and 7) where the bivalve Erodona mactroides and gastropod Heleobia australis were dominants. No significant correlation between the overall abundance of organisms and salinity could be demonstrated (r = 0.43, p > 0.1). However, a reduction in organism abundance between the autumn and the summer coincided with a marked drop in salinity. Falling levels of dissolved oxygen could have influenced the decreasing density of organisms (r = 0.75, p < 0.05). Species richness and diversity were correlated (p < 0.1) with salinity but the degree of correlation was not uniformly significant between sampling periods.

Reproductive phenology of Euterpe edulis (Arecaceae) along a gradient in the Atlantic rainforest of Brazil

The palm Euterpe edulis Mart. is one of the dominant tree species in the Atlantic rainforest and considered a key resource for many frugivorous birds. We compared the reproductive phenology of E. edulis in three types of Atlantic rainforest (two lowland forests, restinga and coastal-plain, and a premontane forest) on Cardoso Island (Cananeia, São Paulo, Brazil), aiming to answer the following questions: (i) whether the reproduction of E. edulis is annual and seasonal across the years in the three forest types studied; (ii) what are the environmental factors influencing the reproductive phenology of E. edulis; and (iii) how does the timing of fruiting and fruit production of E. edulis vary among the three forest types? We evaluated the presence of flowers and fruits (immature, unripe and ripe) from August 2001 to July 2004 in 150 individuals (50 per forest), and estimated the number of infructescences with ripe fruits and the production of fruits and seeds by collecting them on the forest floor in the three forest types. Flowering and fruiting of E. edulis were annual and significantly seasonal in the three forest types, with a high synchrony of flowering and medium to low synchrony of fruiting. Flowering peaked in November and December, and immature and unripe fruits peaked in January and March, all during the rainy season. Immature and unripe fruit phases were correlated with the daylength, precipitation and temperature, important factors for fruits development. Ripe fruits peaked in April and May, in the less rainy season, with significant differences in the mean dates among forests. The number of infructescences with ripe fruits and the biomass of fruits and seeds collected on the ground also differed significantly among the forest types, being greater in the restinga and coastal plain forests, respectively. Differences in productivity were related to palm density in each area and the soil fertility. The complementary fruiting pattern of E. edulis in the forests studied may affect the distribution and abundance of certain frugivorous bird species that feed on their fruits.

Variation in liana abundance and biomass along an elevational gradient in the tropical Atlantic Forest (Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Seed dispersal and predation in the endemic Atlantic rainforest palm Astrocaryum aculeatissimum across a gradient of seed disperser abundance

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Changes in ichthyofauna composition along a gradient from clearwaters to blackwaters in coastal streams of Atlantic forest (southeastern Brazil) in relation to environmental variables

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Calculation of the vacuum pressure gradient in field emission displays

The usual design of field-emission displays (FEDs) often results in high vacuum pressure gradients inside the glass plates of the device, and this is the main limitation to the widespread availability of large area FEDs. In this paper, we perform theoretical calculations using the finite element method for determining the pressure distributions in several pumping configurations, including a new FED configuration known as porous FED or pFED. The approach here is capable of clarifying the design issues influencing the final pressure relevant to the field-emission display devices. (C) 2001 Elsevier B.V. B.V. All rights reserved.

NONDEGENERATE UMBILICS, THE PATH FORMULATION and GRADIENT BIFURCATION PROBLEMS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fish community structure along a conservation gradient in Bodoquena Plateau streams, central West of Brazil.

Aim: To investigate whether composition and structure of stream ichthyofauna vary along the conservation gradient in the Bodoquena Plateau; Methods: Standardized sampling was performed in nine stream stretches (three references, three in the pasture, and three in urban areas), each 80 m long, in April, May and June/08; Results: A quantity of 8,102 individuals representing 36 species was collected. There were no significant differences with respect to absolute species richness among stretches. Urban stretches were more similar to each other than the other two groups, both regarding species composition and abundance. A set of six species was considered an indicator of reference stretches, whereas two were of pasture stretches and four of urban stretches. Poecilia reticulata and Corydoras aeneus, occurring only in urban stretches, were unique in showing the maximum values in the indicator species analysis; Conclusions: Results indicate changes in the ichthyofauna with urbanized surrounding water courses. The presence and abundance of Poecilia reticulata and Corydoras aeneus may indicate the quality loss of these environments.

Rugged, Portable Tungsten Coil Atomic Emission Spectrometer

Tungsten coil atomic emission spectrometry is an ideal technique for field applications because of its simplicity, low cost, low power requirement, and independence from cooling systems. A new, portable, compact design is reported here. The tungsten coil is extracted from an inexpensive 24 V, 250 W commercial light bulb. The coil is housed in a small, aluminum cell. The emission signal exits from a small aperture in the cell, while the bulk of the blackbody emission from the tungsten coil is blocked. The resulting spectra exhibit extremely low background signals. The atomization cell, a single lens, and a hand-held charge coupled device (CCD) spectrometer are fixed on a 1 x 6 x 30 cm ceramic base. The resulting system is robust and easily transported. A programmable, miniature 400 W solid-state constant current power supply controls the temperature of the coil. Fifteen elements are determined with the system (Ba, Cs, Li, Rb, Cr, Sr, Eu, Yb, Mn, Fe, Cu, Mg, V, Al, and Ga). The precision ranges from 4.3% to 8.4% relative standard deviation for repetitive measurements of the same solution. Detection limits are in the 0.04 to 1500 mu g/L range. Accuracy is tested using standard reference materials for polluted water, peach leaves, and tomato leaves. For those elements present above the detection limit, recoveries range from 72% to 147%.

An adapted thermal-gradient block for the germination of photoblastic seeds

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)