Spatially explicit estimates of stock size, structure and biomass of North Atlantic albacore tuna (Thunnus alalunga) in the North Atlantic for the period 1987-2005, compiled from statistics about ICCAT fishery region B13

The development of the ecosystem approach and models for the management of ocean marine resources requires easy access to standard validated datasets of historical catch data for the main exploited species. They are used to measure the impact of biomass removal by fisheries and to evaluate the models skills, while the use of standard dataset facilitates models inter-comparison. North Atlantic albacore tuna is exploited all year round by longline and in summer and autumn by surface fisheries and fishery statistics compiled by the International Commission for the Conservation of Atlantic Tunas (ICCAT). Catch and effort with geographical coordinates at monthly spatial resolution of 1° or 5° squares were extracted for this species with a careful definition of fisheries and data screening. In total, thirteen fisheries were defined for the period 1956-2010, with fishing gears longline, troll, mid-water trawl and bait fishing. However, the spatialized catch effort data available in ICCAT database represent a fraction of the entire total catch. Length frequencies of catch were also extracted according to the definition of fisheries above for the period 1956-2010 with a quarterly temporal resolution and spatial resolutions varying from 1°x 1° to 10°x 20°. The resolution used to measure the fish also varies with size-bins of 1, 2 or 5 cm (Fork Length). The screening of data allowed detecting inconsistencies with a relatively large number of samples larger than 150 cm while all studies on the growth of albacore suggest that fish rarely grow up over 130 cm. Therefore, a threshold value of 130 cm has been arbitrarily fixed and all length frequency data above this value removed from the original data set.

Spatially explicit estimates of stock size, structure and biomass of North Atlantic albacore tuna (Thunnus alalunga) in the North Atlantic for the period 1975-1984, compiled from statistics about ICCAT fishery region B14

The development of the ecosystem approach and models for the management of ocean marine resources requires easy access to standard validated datasets of historical catch data for the main exploited species. They are used to measure the impact of biomass removal by fisheries and to evaluate the models skills, while the use of standard dataset facilitates models inter-comparison. North Atlantic albacore tuna is exploited all year round by longline and in summer and autumn by surface fisheries and fishery statistics compiled by the International Commission for the Conservation of Atlantic Tunas (ICCAT). Catch and effort with geographical coordinates at monthly spatial resolution of 1° or 5° squares were extracted for this species with a careful definition of fisheries and data screening. In total, thirteen fisheries were defined for the period 1956-2010, with fishing gears longline, troll, mid-water trawl and bait fishing. However, the spatialized catch effort data available in ICCAT database represent a fraction of the entire total catch. Length frequencies of catch were also extracted according to the definition of fisheries above for the period 1956-2010 with a quarterly temporal resolution and spatial resolutions varying from 1°x 1° to 10°x 20°. The resolution used to measure the fish also varies with size-bins of 1, 2 or 5 cm (Fork Length). The screening of data allowed detecting inconsistencies with a relatively large number of samples larger than 150 cm while all studies on the growth of albacore suggest that fish rarely grow up over 130 cm. Therefore, a threshold value of 130 cm has been arbitrarily fixed and all length frequency data above this value removed from the original data set.

Spatially explicit estimates of stock size, structure and biomass of North Atlantic albacore tuna (Thunnus alalunga) in the North Atlantic for the period 1980-2009, compiled from statistics about ICCAT fishery region L9

The development of the ecosystem approach and models for the management of ocean marine resources requires easy access to standard validated datasets of historical catch data for the main exploited species. They are used to measure the impact of biomass removal by fisheries and to evaluate the models skills, while the use of standard dataset facilitates models inter-comparison. North Atlantic albacore tuna is exploited all year round by longline and in summer and autumn by surface fisheries and fishery statistics compiled by the International Commission for the Conservation of Atlantic Tunas (ICCAT). Catch and effort with geographical coordinates at monthly spatial resolution of 1° or 5° squares were extracted for this species with a careful definition of fisheries and data screening. In total, thirteen fisheries were defined for the period 1956-2010, with fishing gears longline, troll, mid-water trawl and bait fishing. However, the spatialized catch effort data available in ICCAT database represent a fraction of the entire total catch. Length frequencies of catch were also extracted according to the definition of fisheries above for the period 1956-2010 with a quarterly temporal resolution and spatial resolutions varying from 1°x 1° to 10°x 20°. The resolution used to measure the fish also varies with size-bins of 1, 2 or 5 cm (Fork Length). The screening of data allowed detecting inconsistencies with a relatively large number of samples larger than 150 cm while all studies on the growth of albacore suggest that fish rarely grow up over 130 cm. Therefore, a threshold value of 130 cm has been arbitrarily fixed and all length frequency data above this value removed from the original data set.

Spatially explicit estimates of stock size, structure and biomass of North Atlantic albacore tuna (Thunnus alalunga) in the North Atlantic for the period 1987-2005, compiled from statistics about ICCAT fishery region B12

The development of the ecosystem approach and models for the management of ocean marine resources requires easy access to standard validated datasets of historical catch data for the main exploited species. They are used to measure the impact of biomass removal by fisheries and to evaluate the models skills, while the use of standard dataset facilitates models inter-comparison. North Atlantic albacore tuna is exploited all year round by longline and in summer and autumn by surface fisheries and fishery statistics compiled by the International Commission for the Conservation of Atlantic Tunas (ICCAT). Catch and effort with geographical coordinates at monthly spatial resolution of 1° or 5° squares were extracted for this species with a careful definition of fisheries and data screening. In total, thirteen fisheries were defined for the period 1956-2010, with fishing gears longline, troll, mid-water trawl and bait fishing. However, the spatialized catch effort data available in ICCAT database represent a fraction of the entire total catch. Length frequencies of catch were also extracted according to the definition of fisheries above for the period 1956-2010 with a quarterly temporal resolution and spatial resolutions varying from 1°x 1° to 10°x 20°. The resolution used to measure the fish also varies with size-bins of 1, 2 or 5 cm (Fork Length). The screening of data allowed detecting inconsistencies with a relatively large number of samples larger than 150 cm while all studies on the growth of albacore suggest that fish rarely grow up over 130 cm. Therefore, a threshold value of 130 cm has been arbitrarily fixed and all length frequency data above this value removed from the original data set.

Spatially explicit estimates of stock size, structure and biomass of North Atlantic albacore tuna (Thunnus alalunga) in the North Atlantic for the period 1967-2008, compiled from statistics about ICCAT fishery region T10

The development of the ecosystem approach and models for the management of ocean marine resources requires easy access to standard validated datasets of historical catch data for the main exploited species. They are used to measure the impact of biomass removal by fisheries and to evaluate the models skills, while the use of standard dataset facilitates models inter-comparison. North Atlantic albacore tuna is exploited all year round by longline and in summer and autumn by surface fisheries and fishery statistics compiled by the International Commission for the Conservation of Atlantic Tunas (ICCAT). Catch and effort with geographical coordinates at monthly spatial resolution of 1° or 5° squares were extracted for this species with a careful definition of fisheries and data screening. In total, thirteen fisheries were defined for the period 1956-2010, with fishing gears longline, troll, mid-water trawl and bait fishing. However, the spatialized catch effort data available in ICCAT database represent a fraction of the entire total catch. Length frequencies of catch were also extracted according to the definition of fisheries above for the period 1956-2010 with a quarterly temporal resolution and spatial resolutions varying from 1°x 1° to 10°x 20°. The resolution used to measure the fish also varies with size-bins of 1, 2 or 5 cm (Fork Length). The screening of data allowed detecting inconsistencies with a relatively large number of samples larger than 150 cm while all studies on the growth of albacore suggest that fish rarely grow up over 130 cm. Therefore, a threshold value of 130 cm has been arbitrarily fixed and all length frequency data above this value removed from the original data set.

Metro de Madrid rolling stock models and comparative studies relating to comfort

This paper presents the work carried out by Metro de Madrid and the Railway Technology Research Centre (Polytechnic University of Madrid), aimed at setting up rolling stock simulation models with a high level of detail. To do this, the features of the SIMPACK simulation tool used to create models have been briefly outlined, explaining the main features of models in two of the series modelled: 7000 and 8000. Finally, the results obtained from comparing comfort in the 7000 and 8000 series are presented.

Effect of Aspect Ratio on the Three-Dimensional Global Instability Analysis of Incompressible Open Cavity Flows

The stability analysis of open cavity flows is a problem of great interest in the aeronautical industry. This type of flow can appear, for example, in landing gears or auxiliary power unit configurations. Open cavity flows is very sensitive to any change in the configuration, either physical (incoming boundary layer, Reynolds or Mach numbers) or geometrical (length to depth and length to width ratio). In this work, we have focused on the effect of geometry and of the Reynolds number on the stability properties of a threedimensional spanwise periodic cavity flow in the incompressible limit. To that end, BiGlobal analysis is used to investigate the instabilities in this configuration. The basic flow is obtained by the numerical integration of the Navier-Stokes equations with laminar boundary layers imposed upstream. The 3D perturbation, assumed to be periodic in the spanwise direction, is obtained as the solution of the global eigenvalue problem. A parametric study has been performed, analyzing the stability of the flow under variation of the Reynolds number, the L/D ratio of the cavity, and the spanwise wavenumber β. For consistency, multidomain high order numerical schemes have been used in all the computations, either basic flow or eigenvalue problems. The results allow to define the neutral curves in the range of L/D = 1 to L/D = 3. A scaling relating the frequency of the eigenmodes and the length to depth ratio is provided, based on the analysis results.

Migration to an a on-line laboatory in mechanical engineering. The case of a cam-follower design practice.

The European Higher Education Area (EHEA) has leaded to a change in the way the subjects are taught. One of the more important aspects of the EHEA is to support the autonomous study of the students. Taking into account this new approach, the virtual laboratory of the subject Mechanisms of the Aeronautical studies at the Technical University of Madrid is being migrated to an on-line scheme. This virtual laboratory consist on two practices: the design of cam-follower mechanisms and the design of trains of gears. Both practices are software applications that, in the current situation, need to be installed on each computer and the students carry out the practice at the computer classroom of the school under the supervision of a teacher. During this year the design of cam-follower mechanisms practice has been moved to a web application using Java and the Google Development Toolkit. In this practice the students has to design and study the running of a cam to perform a specific displacement diagram with a selected follower taking into account that the mechanism must be able to work properly at high speed regime. The practice has maintained its objectives in the new platform but to take advantage of the new methodology and try to avoid the inconveniences that the previous version had shown. Once the new practice has been ready, a pilot study has been carried out to compare both approaches: on-line and in-lab. This paper shows the adaptation of the cam and follower practice to an on-line methodology. Both practices are described and the changes that has been done to the initial one are shown. They are compared and the weak and strong points of each one are analyzed. Finally we explain the pilot study carried out, the students impression and the results obtained.

Migration to an a on.line laboratory in mechanical engineering. The case of a cam follower design practice.

The European Higher Education Area (EHEA) has leaded to a change in the way the subjects are taught. One of the more important aspects of the EHEA is to support the autonomous study of the students. Taking into account this new approach, the virtual laboratory of the subject Mechanisms of the Aeronautical studies at the Technical University of Madrid is being migrated to an on-line scheme. This virtual laboratory consist on two practices: the design of cam-follower mechanisms and the design of trains of gears. Both practices are software applications that, in the current situation, need to be installed on each computer and the students carry out the practice at the computer classroom of the school under the supervision of a teacher. During this year the design of cam-follower mechanisms practice has been moved to a web application using Java and the Google Development Toolkit. In this practice the students has to design and study the running of a cam to perform a specific displacement diagram with a selected follower taking into account that the mechanism must be able to work properly at high speed regime. The practice has maintained its objectives in the new platform but to take advantage of the new methodology and try to avoid the inconveniences that the previous version had shown. Once the new practice has been ready, a pilot study has been carried out to compare both approaches: on-line and in-lab. This paper shows the adaptation of the cam and follower practice to an on-line methodology. Both practices are described and the changes that has been done to the initial one are shown. They are compared and the weak and strong points of each one are analyzed. Finally we explain the pilot study carried out, the students impression and the results obtained.

Development of a tanks line for waxing landing gear parts

The aim of this article is to define the technical specifications and to design the implementation of a line of tanks that would be used in the process of waxing and de-waxing large pieces. As it is based in a real case, it is also analyzed the process of dismantling the former installation that supported these functions. The origin of this project is due to a new rating for the maintenance of landing gears which makes the previous waxing line that was prepared to work on smaller aircraft?s pieces, no longer adequate to the current workflow and processes.

BR3: a biologically inspired fish-like robot actuated by SMA-based artificial muscles

Los peces son animales, donde en la mayoría de los casos, son considerados como nadadores muy eficientes y con una alta capacidad de maniobra. En general los peces se caracterizan por su capacidad de maniobra, locomoción silencioso, giros y partidas rápidas y viajes de larga distancia. Los estudios han identificado varios tipos de locomoción que los peces usan para generar maniobras y natación constante. A bajas velocidades la mayoría de los peces utilizan sus aletas pares y / o impares para su locomoción, que ofrecen una mayor maniobrabilidad y mejor eficiencia de propulsión. A altas velocidades la locomoción implica el cuerpo y / o aleta caudal porque esto puede lograr un mayor empuje y aceleración. Estas características pueden inspirar el diseo y fabricación de una piel muy flexible, una aleta caudal mórfica y una espina dorsal no articulada con una gran capacidad de maniobra. Esta tesis presenta el desarrollo de un novedoso pez robot bio-inspirado y biomimético llamado BR3, inspirado en la capacidad de maniobra y nado constante de los peces vertebrados. Inspirado por la morfología de los peces Micropterus salmoides o también conocido como lubina negra, el robot BR3 utiliza su fundamento biológico para desarrollar modelos y métodos matemáticos precisos que permiten imitar la locomoción de los peces reales. Los peces Largemouth Bass pueden lograr un nivel increíble de maniobrabilidad y eficacia de la propulsión mediante la combinación de los movimientos ondulatorios y aletas morficas. Para imitar la locomoción de los peces reales en una contraparte artificial se necesita del análisis de tecnologías de actuación alternativos, como arreglos de fibras musculares en lugar de servo actuadores o motores DC estándar, así como un material flexible que proporciona una estructura continua sin juntas. Las aleaciones con memoria de forma (SMAs) proveen la posibilidad de construir robots livianos, que no emiten ruido, sin motores, sin juntas y sin engranajes. Asi es como un pez robot submarino se ha desarrollado y cuyos movimientos son generados mediante SMAs. Estos actuadores son los adecuados para doblar la espina dorsal continua del pez robot, que a su vez provoca un cambio en la curvatura del cuerpo. Este tipo de arreglo estructural está inspirado en los músculos rojos del pescado, que son usados principalmente durante la natación constante para la flexión de una estructura flexible pero casi incompresible como lo es la espina dorsal de pescado. Del mismo modo la aleta caudal se basa en SMAs y se modifica para llevar a cabo el trabajo necesario. La estructura flexible proporciona empuje y permite que el BR3 nade. Por otro lado la aleta caudal mórfica proporciona movimientos de balanceo y guiada. Motivado por la versatilidad del BR3 para imitar todos los modos de natación (anguilliforme, carangiforme, subcarangiforme y tunniforme) se propone un controlador de doblado y velocidad. La ley de control de doblado y velocidad incorpora la información del ángulo de curvatura y de la frecuencia para producir el modo de natación deseado y a su vez controlar la velocidad de natación. Así mismo de acuerdo con el hecho biológico de la influencia de la forma de la aleta caudal en la maniobrabilidad durante la natación constante se propone un control de actitud. Esta novedoso robot pescado es el primero de su tipo en incorporar sólo SMAs para doblar una estructura flexible continua y sin juntas y engranajes para producir empuje e imitar todos los modos de natación, así como la aleta caudal que es capaz de cambiar su forma. Este novedoso diseo mecatrónico presenta un futuro muy prometedor para el diseo de vehículos submarinos capaces de modificar su forma y nadar mas eficientemente. La nueva metodología de control propuesto en esta tesis proporcionan una forma totalmente nueva de control de robots basados en SMAs, haciéndolos energéticamente más eficientes y la incorporación de una aleta caudal mórfica permite realizar maniobras más eficientemente. En su conjunto, el proyecto BR3 consta de cinco grandes etapas de desarrollo: • Estudio y análisis biológico del nado de los peces con el propósito de definir criterios de diseño y control. • Formulación de modelos matemáticos que describan la: i) cinemática del cuerpo, ii) dinámica, iii) hidrodinámica iv) análisis de los modos de vibración y v) actuación usando SMA. Estos modelos permiten estimar la influencia de modular la aleta caudal y el doblado del cuerpo en la producción de fuerzas de empuje y fuerzas de rotación necesarias en las maniobras y optimización del consumo de energía. • Diseño y fabricación de BR3: i) estructura esquelética de la columna vertebral y el cuerpo, ii) mecanismo de actuación basado en SMAs para el cuerpo y la aleta caudal, iii) piel artificial, iv) electrónica embebida y v) fusión sensorial. Está dirigido a desarrollar la plataforma de pez robot BR3 que permite probar los métodos propuestos. • Controlador de nado: compuesto por: i) control de las SMA (modulación de la forma de la aleta caudal y regulación de la actitud) y ii) control de nado continuo (modulación de la velocidad y doblado). Está dirigido a la formulación de los métodos de control adecuados que permiten la modulación adecuada de la aleta caudal y el cuerpo del BR3. • Experimentos: está dirigido a la cuantificación de los efectos de: i) la correcta modulación de la aleta caudal en la producción de rotación y su efecto hidrodinámico durante la maniobra, ii) doblado del cuerpo para la producción de empuje y iii) efecto de la flexibilidad de la piel en la habilidad para doblarse del BR3. También tiene como objetivo demostrar y validar la hipótesis de mejora en la eficiencia de la natación y las maniobras gracias a los nuevos métodos de control presentados en esta tesis. A lo largo del desarrollo de cada una de las cinco etapas, se irán presentando los retos, problemáticas y soluciones a abordar. Los experimentos en canales de agua estarán orientados a discutir y demostrar cómo la aleta caudal y el cuerpo pueden afectar considerablemente la dinámica / hidrodinámica de natación / maniobras y cómo tomar ventaja de la modulación de curvatura que la aleta caudal mórfica y el cuerpo permiten para cambiar correctamente la geometría de la aleta caudal y del cuerpo durante la natación constante y maniobras. ABSTRACT Fishes are animals where in most cases are considered as highly manoeuvrable and effortless swimmers. In general fishes are characterized for his manoeuvring skills, noiseless locomotion, rapid turning, fast starting and long distance cruising. Studies have identified several types of locomotion that fish use to generate maneuvering and steady swimming. At low speeds most fishes uses median and/or paired fins for its locomotion, offering greater maneuverability and better propulsive efficiency At high speeds the locomotion involves the body and/or caudal fin because this can achieve greater thrust and accelerations. This can inspire the design and fabrication of a highly deformable soft artificial skins, morphing caudal fins and non articulated backbone with a significant maneuverability capacity. This thesis presents the development of a novel bio-inspired and biomimetic fishlike robot (BR3) inspired by the maneuverability and steady swimming ability of ray-finned fishes (Actinopterygii, bony fishes). Inspired by the morphology of the Largemouth Bass fish, the BR3 uses its biological foundation to develop accurate mathematical models and methods allowing to mimic fish locomotion. The Largemouth Bass fishes can achieve an amazing level of maneuverability and propulsive efficiency by combining undulatory movements and morphing fins. To mimic the locomotion of the real fishes on an artificial counterpart needs the analysis of alternative actuation technologies more likely muscle fiber arrays instead of standard servomotor actuators as well as a bendable material that provides a continuous structure without joins. The Shape Memory Alloys (SMAs) provide the possibility of building lightweight, joint-less, noise-less, motor-less and gear-less robots. Thus a swimming underwater fish-like robot has been developed whose movements are generated using SMAs. These actuators are suitable for bending the continuous backbone of the fish, which in turn causes a change in the curvature of the body. This type of structural arrangement is inspired by fish red muscles, which are mainly recruited during steady swimming for the bending of a flexible but nearly incompressible structure such as the fishbone. Likewise the caudal fin is based on SMAs and is customized to provide the necessary work out. The bendable structure provides thrust and allows the BR3 to swim. On the other hand the morphing caudal fin provides roll and yaw movements. Motivated by the versatility of the BR3 to mimic all the swimming modes (anguilliform, caranguiform, subcaranguiform and thunniform) a bending-speed controller is proposed. The bending-speed control law incorporates bend angle and frequency information to produce desired swimming mode and swimming speed. Likewise according to the biological fact about the influence of caudal fin shape in the maneuverability during steady swimming an attitude control is proposed. This novel fish robot is the first of its kind to incorporate only SMAs to bend a flexible continuous structure without joints and gears to produce thrust and mimic all the swimming modes as well as the caudal fin to be morphing. This novel mechatronic design is a promising way to design more efficient swimming/morphing underwater vehicles. The novel control methodology proposed in this thesis provide a totally new way of controlling robots based on SMAs, making them more energy efficient and the incorporation of a morphing caudal fin allows to perform more efficient maneuvers. As a whole, the BR3 project consists of five major stages of development: • Study and analysis of biological fish swimming data reported in specialized literature aimed at defining design and control criteria. • Formulation of mathematical models for: i) body kinematics, ii) dynamics, iii) hydrodynamics, iv) free vibration analysis and v) SMA muscle-like actuation. It is aimed at modelling the e ects of modulating caudal fin and body bend into the production of thrust forces for swimming, rotational forces for maneuvering and energy consumption optimisation. • Bio-inspired design and fabrication of: i) skeletal structure of backbone and body, ii) SMA muscle-like mechanisms for the body and caudal fin, iii) the artificial skin, iv) electronics onboard and v) sensor fusion. It is aimed at developing the fish-like platform (BR3) that allows for testing the methods proposed. • The swimming controller: i) control of SMA-muscles (morphing-caudal fin modulation and attitude regulation) and ii) steady swimming control (bend modulation and speed modulation). It is aimed at formulating the proper control methods that allow for the proper modulation of BR3’s caudal fin and body. • Experiments: it is aimed at quantifying the effects of: i) properly caudal fin modulation into hydrodynamics and rotation production for maneuvering, ii) body bending into thrust generation and iii) skin flexibility into BR3 bending ability. It is also aimed at demonstrating and validating the hypothesis of improving swimming and maneuvering efficiency thanks to the novel control methods presented in this thesis. This thesis introduces the challenges and methods to address these stages. Waterchannel experiments will be oriented to discuss and demonstrate how the caudal fin and body can considerably affect the dynamics/hydrodynamics of swimming/maneuvering and how to take advantage of bend modulation that the morphing-caudal fin and body enable to properly change caudal fin and body’ geometry during steady swimming and maneuvering.

Biofouling on PM stainless steels

Powder metallurgy (PM) consists in obtaining pieces of powder metal that are processed at high temperatures and pressure. Due to its characteristic manufacturing process, the materials can have a specific and controlled porosity, which makes it possible to obtain porous parts such as ball bearings, gears, and roller bearings, etc. This porosity is what made us think about how easy biofouling would be on these materials and its possible environmental applications.

Historia de la protección del patrimonio arquitectónico en España. 1933-1985

El trabajo de investigación que presentamos tiene como principal objetivo, la recopilación, el registro, el análisis y la reflexión sobre una época, tan trascendental como poco estudiada desde el ámbito arquitectónico, como es el período comprendido entre las dos normas de mayor relevancia en relación a la protección del Patrimonio Histórico Español del último siglo. Nos referimos a la Ley sobre Defensa, Conservación y Acrecentamiento del Patrimonio Histórico Nacional de 13 de mayo de 1933 y la Ley 13/1985, de 25 de junio, del Patrimonio Histórico Español. A través de la investigación realizada, se pretende aportar una visión integral de esta etapa, desde el enfoque arquitectónico, fundamentando la misma en el desarrollo de pautas metodológicas, abordadas desde la recopilación exhaustiva del material bibliográfico y documental para su posterior análisis. A partir de esta fase inicial, se han identificado los nexos comunes entre los estudios existentes sobre el patrimonio monumental español previos a la Guerra Civil y las investigaciones dedicadas a la historia de las últimas décadas del siglo XX. De esta forma, se ha procurado trazar un “puente” documental, con el que trasponer virtualmente el vacío bibliográfico existente. Históricamente, la protección del patrimonio histórico edificado y urbano, ha preocupado y ocupado a multitud de profesionales que, desde disciplinas dispares, han emprendido la tarea ímproba de comprender y explicar cuáles han sido los avatares, históricos y legales, que han marcado su evolución. Tal preocupación ha generado una bibliografía ingente y diversa, desde la protección formal y precisa, sobre uno u otro material, pasando por el marco historiográfico de las tendencias conservacionistas y las teorías decimonónicas, las filigranas formadas por las cuantiosas normas promulgadas desde la Novísima Recopilación, hasta la incidencia del planeamiento urbano en la tutela del patrimonio, incluidas la trama de competencias y yuxtaposiciones administrativas. Documentos de toda índole y profundidad científica, que como mosaicos hispanomusulmanes, dibujan el panorama patrimonial en el que la criba de material resulta una tarea, en ocasiones, inextricable. El título de este documento, en sí mismo, circunscribe la materia que ha sido el objeto de análisis durante el proceso de investigación, el Patrimonio Arquitectónico Monumental. El eje o núcleo basal de estudio se sitúa en los bienes inmuebles, los edificados, que, a su vez, ostentan la declaración de Bien de Interés Cultural, y que, por ende, pertenecen al Patrimonio Histórico Español. La metodología de trabajo se ha desarrollado de forma concéntrica, desde aspectos generales de la protección del patrimonio monumental, como el marco legal que antecede a la promulgación de la Ley de 1933, y el estado previo de los bienes susceptibles de ser preservados. Reconocemos en el ámbito legislativo, el fundamento orgánico que regula y dirige la tutela del patrimonio histórico español y la acción conservadora, y que delimita el ámbito a partir del cual se condiciona el devenir de los bienes culturales. Del esquema de situación surgido del análisis previo, se han detectado los factores claves en la transición hacia la Ley de Patrimonio Histórico Español; la evolución conceptual del “Patrimonio”, como apreciación genérica, y el testimonio de este progreso a través de los valores históricos, artísticos y culturales. El presente documento de investigación, consta de una primera fase, correspondiente al Capítulo 1, que se ha desarrollado a partir, principalmente, de la ordenación jurídica que rige el Patrimonio Histórico Español, a través de leyes, decretos, órdenes y disposiciones anexas, complementado con el material bibliográfico dedicado a la revisión histórica del proceso legal de la protección del patrimonio histórico-artístico. Si bien no ha sido nuestro propósito realizar un estudio pormenorizado del volumen jurídico e histórico que precede a la Ley de 1933, y que da inicio al período de estudio de la presente investigación, sí lo ha sido centrarnos en la elaboración de un extracto de aquellos elementos de la doctrina de mayor relevancia y repercusión en la protección del patrimonio histórico-artístico y/o monumental español. A lo largo de este estudio hemos comprobado lo que algunos juristas ya habían planteado, acerca de la profunda dispersión, ramificación, y diversificación de esfuerzos, tanto en la legislación específica como en la urbanística. Esta disgregación se ha extendido al ámbito de las medidas de reconocimiento caracterizado por la elaboración de múltiples catálogos e inventarios, con desigual transcendencia, alcance y utilidad. El resultado ha sido una división de esfuerzos, desdibujando el objetivo y convirtiendo la acción del reconocimiento en múltiples empresas inconexas y de escasa trascendencia. Nuestra investigación avanza en el análisis de la protección del patrimonio, como concepto globalizador, con el desarrollo del Capítulo 2, en el que se incluye una serie de mecanismos directos e indirectos que, individualmente, suelen carecer de la fuerza efectiva que muchos de los monumentos o conjuntos monumentales requieren para sobrevivir al paso del tiempo y sus circunstancias. En primer lugar, en este segundo capítulo nos hemos centrado, específicamente, en el mecanismo regulado por la Ley del Patrimonio Histórico Español, y el régimen general de protección implementado a partir de su promulgación en 1985. En especial, consideraremos la declaración de Interés Cultural como grado máximo de protección y tutela de un bien, y su posterior inscripción en el Registro General correspondiente, dependiente del Ministerio de Educación, Cultura y Deporte. Este mecanismo representa el instrumento por antonomasia que condensa las facultades de tutela del Estado sobre un bien del que se considera poseedor y aglutinador de valores “culturales” —como cohesión de los valores históricos, artísticos, sociales, etc. — representativos de la idiosincrasia española, y sobre el cual no existen dudas sobre la necesidad de garantizar su permanencia a través de su conservación. En segunda instancia, hemos analizado el Planeamiento Urbanístico, como aglutinador de valores culturales contenidos en la ciudad y como contenedor de los efectos generados por el hombre a partir de su interacción con el medio en el que habita y se relaciona. En tercer término, hemos recopilado y estudiado la concepción de los catálogos, como noción genérica de protección. Desde hace siglos, este género ha estado definido como una herramienta capaz de intervenir en la protección del patrimonio histórico, aunque de una manera difícilmente cuantificable, mediante la identificación, enumeración y descripción de una tipología concreta de monumentos o grupos de ellos, contribuyendo al reconocimiento de los valores cualitativos contenidos en éstos. El tercer capítulo analiza el mecanismo directo de tutela que ejerce la Administración en el patrimonio monumental. La declaración de monumentalidad o de Bien de Interés Cultural y su inclusión en el Registro General de Protección. La protección teórica y la protección jurídica de un monumento, analizadas hasta el momento, resultan tan necesarias como pueriles si no van seguidas de su consumación. En el caso de este tipo de patrimonio monumental, toda acción que tenga como objeto resguardar los valores implícitos en un bien mueble o inmueble, y en su materia, implica el cumplimiento de la protección. Por último, el cuarto capítulo se convierte en el punto culminante, y por ende crucial, del proceso de protección del Patrimonio Cultural, el de la consumación de la intervención. La teoría, la crítica, la normativa y hasta las doctrinas más radicales en materia de protección del patrimonio cultural, carecen de sentido si no las suceden los hechos, la acción, en antítesis a la omisión o la desidia. De ello ha dado pruebas elocuentes la propia historia en multitud de ocasiones con la destrucción, por indolencia o desconocimiento, de importantes vestigios del patrimonio arquitectónico español. Por este motivo, y para ser consecuentes con nuestra tesis hemos recuperado, concentrado y analizado la documentación de obra de tres monumentos imprescindibles del patrimonio construido (la Catedral de Burgos, el Palacio-Castillo de la Aljafería en Zaragoza y la Muralla de Lugo). En ocasiones, al examinar retrospectivamente las intervenciones en monumentos de gran envergadura, física y cultural como catedrales o murallas, algunos investigadores han tenido la sospecha o prevención de que las actuaciones no han seguido un plan de actuación premeditado, sino que han sido el resultado de impulsos o arrebatos inconexos producto de la urgencia por remediar algún tipo de deterioro. En oposición a esto, y a través del estudio de las intervenciones llevadas a cabo en los tres monumentos mencionados, hemos podido corroborar que, a excepción de intervenciones de emergencia fruto de circunstancias puntuales, existe coherencia desde el proceso de análisis de situación de un bien a la designación de prioridades, que ha regido el proceso restaurador a lo largo de dos siglos. La evolución de las intervenciones realizadas en los monumentos analizados ha estado definida, además de por su complejidad, magnitud y singularidad constructiva, por el devenir de su estructura y su uso. En conclusión, la efectividad de la protección del patrimonio cultural español, radica en la concomitancia de múltiples aspectos, entre ellos: el cumplimiento acertado de las normas vigentes, específicas y accesorias; el conocimiento del bien y de sus valores históricos, artísticos, y culturales; su catalogación o inclusión en los inventarios correspondientes; el compromiso de los agentes e instituciones de los cuales depende; la planificación de las tareas necesarias que garanticen tanto la salvaguarda estructural como la conservación de sus valores; y la incorporación de un plan de seguimiento que permita detectar eventuales peligros que atenten contra su conservación. Pero, la situación óptima estaría dada por un sistema en el que estos mecanismos —regulaciones específicas y urbanísticas, Declaraciones de Bien de Interés Cultural, Catálogos e Inventarios, etc. — funcionaran, de forma parcial o total, como una maquinaria, donde cada pieza operara con independencia relativa, pero en sintonía con los demás engranajes. Hasta el momento, la realidad dista mucho de esta situación, convirtiendo esta convivencia en una utopía. Tanto los legisladores, como las autoridades y los técnicos involucrados, deben tener presente que, de ellos, de los parámetros asignados por la legislación, de la implementación de los instrumentos estipulados por ésta y de las decisiones tomadas por cada uno de los poderes directivos de los órganos competentes, dependerá el alcance y efectividad de la protección, ya que en cada vertiente existe, en mayor o menor medida, un porcentaje de interpretación y subjetividad. ABSTRACT The research that we present has as the main objective to collect, record, analyzed and reflection on a time, that was little studied from the architectural field. It is the period between the two laws of most relevance to the protection of Spanish Historical Heritage of the last century. We refer to the Law on the Protection and Conservation of National Heritage of 1933 and Law 16/1985 of Spanish Historical Heritage. Through this research, it aims to provide a comprehensive view of the stage from the architectural approach, basing it on the development of methodological guidelines. The investigation was initiated by the bibliography and documentary for further analysis. After this initial phase, we have identified the common links between existing studies on the Spanish architectural heritage prior to the Civil War and dedicated research into the history of the late twentieth century. Thus, we have tried to draw a documental bridge, with which virtually transpose the gap that has existed. Historically, professionals from diverse disciplines have been worried and busy of the protection of the built and urban heritage. They have undertaken the daunting task of understanding and explaining the historical and legal difficulties, which have marked its evolution. This concern has generated an enormous and diverse literature, from formal and precise protection, in the framework of conservation historiographical trends and nineteenth-century theories. Also, they have studied the impact of urban planning in the protection of heritage, including the competences and administrative juxtapositions. They have generated a lot of documents of all kinds and scientific depth. The title of this document, in itself, circumscribes the matter that has been analyzed during this research process, the Monumental Architectural Heritage. The basal studio is located in the historical buildings, which, in turn, hold the declaration of cultural interest, and thus belong to the Spanish Historical Heritage. The work methodology was developed concentrically from general aspects of the protection of monuments, such as the legal framework that predates the enactment of the 1933 Act, and the previous state of the monuments that should be preserved. We recognize in the legislative sphere, the organic base that regulates and directs the tutelage of Spanish heritage and conservative action. The situation scheme emerged from the previous analysis, and we detected the key factors in the transition to the Spanish Historical Heritage Act; the conceptual evolution of the Heritage as a generic assessment, and witness this progress through historical, artistic and cultural values. This research paper consists of a first phase, corresponding to Chapter 1, which has developed from the legal regulation governing the Spanish Historical Heritage, through laws, decrees, orders and related provisions, supplemented the bibliography dedicated to the historical review of the legal process of protecting historical and artistic heritage. While it was not our intention to conduct a detailed study of the legal and historical volume preceding the 1933 Act, and that started the study period of this investigation, yes he has been focusing on the production of an extract from those elements of the doctrine with greater relevance and impact on the protection of Spanish art-historical and / or architectural heritage. Throughout our study we have seen what some jurists had already raised, about the scattering, branching and diversification of efforts, both in specific law and in urban law. This disaggregation has been extended to the field of recognition measures characterized by the development of multiple catalogs and inventories, with varying significance, scope and usefulness. The result has been a division of efforts, blurring the objective and turning the action of the recognition in multiple attempts little consequence. Our research advances in the analysis of heritage protection, as globalization concept in the Chapter 2, which includes a number of direct and indirect mechanisms that individually, often lack the effective force that many of monuments have required to survive the test of time and circumstances. First, in this second chapter we focused specifically on the mechanism regulated by the Spanish Historical Heritage Act, and the general protection regime implemented since its enactment in 1985 . In particular, we consider the declaration of cultural interest as maximum protection and protection of cultural assets, and their subsequent entry in the relevant General Register under the Ministry of Education, Culture and Sports . This mechanism is the instrument par excellence that condenses the powers of state care about a cultural asset, and which represents the cohesion of the historical, artistic, social values , etc. Secondly, we analyzed the Urban Planning, as a unifying cultural value in the city and as a container for the effects caused by man from its interaction with the environment in which he lives and relates. Thirdly, we have collected and studied the origin of catalogs, as generic notion of protection. For centuries, this genre has been defined as a tool to intervene in the protection of historical heritage, although difficult to quantify, through the identification, enumeration and description of a particular typology of monuments, and that contributing to the recognition of qualitative values contained therein. The third chapter analyzes the direct mechanism of protection performed by the Administration in the monuments with the statement of Cultural asset and inclusion in the General Protection Register. The theoretical and legal protection of a monument is as necessary as puerile if they are not followed by intervention. For this type of architectural heritage, any action which has the aim to safeguard the values implicit in the cultural asset involves protection compliance. Finally, the fourth chapter becomes the highlight, because it treated of the end process of the cultural heritage protection, the consummation of the intervention. The theory, the criticism, the rules and even the radical doctrines on the protection of cultural heritage, are meaningless if they do not take place the facts, the action, in antithesis to the omission. The history of the architectural heritage has given eloquent proof by itself. A lot of vestiges have been lost, in many times, for the destruction, through indolence or unknowledge. For this reason, and to be consistent with our thesis, we have collected and analyzed the projects documentation of three monuments (the Burgos Cathedral, the Aljafería Palace-Castle in Zaragoza and the Wall of Lugo). Sometimes, some researchers have suspected that there had not been planning. They suspect that the projects have been the result of different emergency situations. In opposition of this, we confirm that, except for emergency interventions result of specific circumstances, there have been a process of analysis to conclude in the priorities designation, which has guided the restoration process over two centuries. The complexity, magnitude and constructive uniqueness have defined the evolution of intervention. In conclusion, the effectiveness of the protection of Spanish cultural heritage lies in the conjunction of many aspects, including: the successful implementation of existing, specific and ancillary standards; the knowledge of good and its historical, artistic and cultural values; the cataloging and inclusion in the relevant inventories; and the commitment of the actors and institutions on which it depends. These planning tasks are necessary to ensure both structural safeguards as conservation values; and the introduction of a monitoring plan to detect possible dangers that threaten its conservation. But, the optimal situation would be given by a system in which these urban-regulations and specific mechanisms, would work together like a machine, where each piece operated with relative independence, but in tune with the other gears. So far, the reality is far from this situation, turning this coexistence in a utopia. Both legislators and officials and technicians involved must be aware that the effectiveness and scope of protection depends on your insight and commitment.

Determinação analítica da correção de hélice em um par engrenado devido ao efeito da flexo-torção.

O foco do presente trabalho é estudar a intensificação da pressão de contato entre os dentes de duas engrenagens cilíndricas de dentes retos, que ocorre por causa do deslocamento dos componentes de um redutor de velocidades. Essa intensificação ocorre inclusive em um redutor fabricado sem quaisquer erros de usinagem ou de montagem. A correção de hélice é uma usinagem realizada na superfície do dente da engrenagem que compensa os deslocamentos dos eixos e engrenagens, devido à flexão e à torção, e os deslocamentos dos dentes das engrenagens, devido à flexão e à pressão de contato. Foram estudados efeitos importantes para essa correção de hélice em um redutor de velocidades. Com isso, foi desenvolvido um modelo analítico que calcula a correção necessária para diminuir esse intensificador de pressão de contato em função dos deslocamentos citados acima. Esse modelo analítico foi comparado com um modelo analítico da literatura e com o software comercial RIKOR®. Os resultados de correção de hélice propostos são similares aos da literatura e do RIKOR® com exceção das bordas das engrenagens, aonde existem algumas divergências. Posteriormente, foi desenvolvido um modelo sólido de engrenagem com o perfil evolvente e com as correções de hélice calculadas analiticamente. Este modelo tridimensional (3D) foi elaborado usando os softwares SolidWorks® e Inventor® e simulado por elementos finitos por meio do software ANSYS®. Verificou-se que as três correções de hélice - a proposta, a da literatura e a do RIKOR® - realmente diminuem a intensificação de pressão de contato no flanco do dente da engrenagem. Por fim, foi possível visualizar que a correção proposta nesta dissertação é 3% mais efetiva que a proposta pela literatura e pelo RIKOR® para o caso analisado.

EU Trade Actors after Lisbon: Enhanced Negotiations or Business as Usual? Brugges Political Research Paper No. 32, November 2013

As seen by the launching of trade negotiations with Japan and the United States, the European Union has shifted gears in order to achieve amplified benefits in bilateral trade agreements. The entry into force of the Lisbon Treaty brought the European Parliament and the European External Action Service into the picture as new actors in trade negotiations. The question arises if the new framework of trade negotiations is better off than the pre-Lisbon era. By applying Veto Players theory to the Central American Association Agreement and Principal-Agent theory to the Ukrainian Association Agreement, two results were concluded. First, the participation of the European Parliament as a veto player has decreased the effectiveness of trade negotiation. Second, the participation of the European External Action Service has shown the contrary, namely an increase of effectiveness in trade negotiations.