Surface diffusion of adsorbed molecules in porous media: Monolayer, multilayer, and capillary condensation regimes

This review provides an overview of surface diffusion and capillary condensate flow in porous media. Emphasis has been placed on the distinction between purely surface diffusion, multilayer surface diffusion, and, capillary condensate flow.

Introdução ao estudo de durabilidade do betão auto-compactável

O âmbito desta dissertação centra-se na temática de estudos de durabilidade do betão auto-compactavel (BAC), cujo cálculo dos constituintes foi feito pelo método de Nepomuceno. Sobre amostras de 40, 55 e 70 MPa, produzidas segundo o método atrás identificado, foram feitos estudos químicos e morfológicos, de propriedades de transporte de mecanismos de degradação e de propriedades indirectas. Os três provetes em estudo de 40, 55 e 70 MPa, apresentam características satisfatórias a nível da microestrutura, propriedades de transporte, carbonatação, penetração de cloretos e análise de ultra-sons. Numa análise comparativa entre as três resistências mecânicas em estudo, verifica-se que as propriedades de durabilidade vão melhorando a medida que a resistência mecânica também aumenta, ou seja, os provete com 70 MPa apresentam as melhores características a nível de durabilidade e os de 40 as piores; os de 55 apresentam propriedades intermédias.

Coexistence of Universal and Topological Anomalous Hall Effects in Metal CrO2 Thin Films in the Dirty Limit

The scaling exponent of 1.6 between anomalous Hall and longitudinal conductivity, characteristic of the universal Hall mechanism in dirty-metal ferromagnets, emerges from a series of CrO2 films as we systematically increase structural disorder. Magnetic disorder in CrO2 increases with temperature and this drives a separate topological Hall mechanism. We find that these terms are controlled discretely by structural and magnetic defect populations, and their coexistence leads to apparent divergence from exponent 1.6, suggesting that the universal term is more prevalent than previously realized.

Viscosity and self-diffusion coefficients of dialkyl adipates: a correlation scheme with predictive capabilities

A correlation and predictive scheme for the viscosity and self-diffusivity of liquid dialkyl adipates is presented. The scheme is based on the kinetic theory for dense hard-sphere fluids, applied to the van der Waals model of a liquid to predict the transport properties. A "universal" curve for a dimensionless viscosity of dialkyl adipates was obtained using recently published experimental viscosity and density data of compressed liquid dimethyl (DMA), dipropyl (DPA), and dibutyl (DBA) adipates. The experimental data are described by the correlation scheme with a root-mean-square deviation of +/- 0.34 %. The parameters describing the temperature dependence of the characteristic volume, V-0, and the roughness parameter, R-eta, for each adipate are well correlated with one single molecular parameter. Recently published experimental self-diffusion coefficients of the same set of liquid dialkyl adipates at atmospheric pressure were correlated using the characteristic volumes obtained from the viscosity data. The roughness factors, R-D, are well correlated with the same single molecular parameter found for viscosity. The root-mean-square deviation of the data from the correlation is less than 1.07 %. Tests are presented in order to assess the capability of the correlation scheme to estimate the viscosity of compressed liquid diethyl adipate (DEA) in a range of temperatures and pressures by comparison with literature data and of its self-diffusivity at atmospheric pressure in a range of temperatures. It is noteworthy that no data for DEA were used to build the correlation scheme. The deviations encountered between predicted and experimental data for the viscosity and self-diffusivity do not exceed 2.0 % and 2.2 %, respectively, which are commensurate with the estimated experimental measurement uncertainty, in both cases.

Development of thermoresponsive (polysulfone/polyacrylonitrile) - based membranes for bioseparation processes

Mestrado integrado em Engenharia Química e Bioquímica

Modelização do despacho económico de Gás Natural

Com as variações e instabilidade dos preços do petróleo, assim como as políticas europeias para adoção de estratégias para o desenvolvimento sustentável, têm levado à procura de forma crescente de novas tecnologias e fontes de energia alternativas. Neste contexto, tem-se assistido a políticas energéticas que estimulam o aumento da produção e a utilização do gás natural, visto que é considerado uma fonte de energia limpa. O crescimento do mercado do gás natural implica um reforço significativo das redes de transporte deste combustível, quer ao nível do armazenamento e fornecimento, quer ao nível dos gasodutos e da sua gestão. O investimento em gasodutos de transporte implica grandes investimentos, que poderiam não ser remunerados da forma esperada, sendo um dos motivos para que exista em Portugal cinco distritos se veem privados deste tipo de infraestruturas. O transporte de gás natural acarreta custos elevados para os consumidores, tanto maiores quanto maior forem as quantidades de gás transacionadas e quanto maior for o percurso pelo gás natural percorrido. Assim assume especial importância a realização de um despacho de gás natural: quais as cargas que cada unidade de fornecimento de gás irá alimentar, qual a quantidade de gás natural que cada UFGs deve injetar na rede, qual o menor percurso possível para o fazer, o tipo de transporte que será utilizado? Estas questões são abordadas na presente dissertação, por forma a minimizar a função custo de transporte, diminuindo assim as perdas na rede de alta pressão e os custos de transporte que serão suportados pelos consumidores. A rede de testes adotada foi a rede nacional de transporte, constituída por 18 nós de consumos, e os tipos de transporte considerados, foram o transporte por gasoduto físico e o transporte através de gasoduto virtual – rotas de transporte rodoviário de gás natural liquefeito. Foram criados diversos cenários, baseados em períodos de inverno e verão, os diferentes cenários abrangeram de forma distinta as variáveis de forma a analisar os impactos que estas variáveis teriam no custo relativo ao transporte de gás natural. Para dar suporte ao modelo de despacho económico, foi desenvolvida uma aplicação computacional – Despacho_GN com o objetivo de despachar as quantidades de gás natural que cada UFG deveria injetar na rede, assim como apresentar os custos acumulados relativos ao transporte. Com o apoio desta aplicação foram testados diversos cenários, sendo apresentados os respectivos resultados. A metodologia elaborada para a criação de um despacho através da aplicação “Despacho_GN” demonstrou ser eficiente na obtenção das soluções, mostrando ser suficientemente rápida para realizar as simulações em poucos segundos. A dissertação proporciona uma contribuição para a exploração de problemas relacionados com o despacho de gás natural, e sugere perspectivas futuras de investigação e desenvolvimento.

Smart Plastic Antibody Material for Hemoglobin Tailored by Silica Surface Imprinting and with Charged Binding Sites: Its use as Ionophore in Potentiometric Transduction

JORNADAS DE ELECTROQUÍMICA E INOVAÇÃO 2013

Bioinspired polyethersulfone-based hollow fiber membranes as the scaffolds in renal assist device for protein-bound toxins removal from blood

Dissertation for obtaining the Master degree in Membrane Engineering

Radiocarbon dating of modern groundwater: the role of the unsaturated zone

Biological and physical processes occurring in soils may lead to significant isotopic changes between the isotopic compositions of atmospheric CO2 and of soil CO2. Also, during water and gas transport from the soil surface to the water table, isotopic changes likely occur due to numerous physical processes such as gas production and diffusion, water advection, and gas-water-rock interactions. In most cases, these changes are not included in the correction models developed for groundwater dating, whereas they can significantly impact the calculation of the 14C age. We explore the role of these processes using: i) experimental data from two aquifer sites (Fontainebleau sands and Astian sands, France), ii) a distributed model to simulate the 14C activities of soil CO2, and iii) numerical simulations in order to highlight the role of the physical processes.¦The 13C content in soil CO2 showed seasonal variations and highlighted the competition between CO2 production and CO2 diffusion. Their respective contributions played a significant role in defining the isotopic composition of CO2 at the water table. On both study sites, variations of the 14C activity in soil CO2 reflect the competition between the fluxes of root derived-CO2 and organic matter derived-CO2. Since the nuclear weapon tests in the fifties and sixties, soil CO2 became significantly depleted in 14C compared to modern atmospheric CO2. Models that take into account this 14C depletion in soil CO2 for dating modern groundwater would lead to apparent younger 14C ages than models that only consider the 14C activity in atmospheric CO2. Moreover, since 2000-2005, the inverse effect is observed as soil CO2 is enriched in 14C compared to atmospheric CO2.¦Therefore, we conclude that the isotopic composition of CO2 at the water table have to be taken into account for the dating of modern groundwater. This requires a systematic sampling of soil CO2 and the measurement of its 13C and 14C contents. We used this information in a numerical simulation to calculate the evolution of isotopic composition of CO2 from the soil surface to the water table. This simulation integrated physical processes in the unsaturated zone (e.g. CO2 production and diffusion, water advection, etc.) and gas-water-rock interactions.

Capsule permeability via polymer and protein ingress/egress.

Static incubation tests, where microcapsules and beads are contacted with polymer and protein solutions, have been developed for the characterization of permselective materials applied for bioartificial organs and drug delivery. A combination of polymer ingress, detected by size-exclusion chromatography, and protein ingress/ egress, assessed by gel electrophoresis, provides information regarding the diffusion kinetics, molar mass cutoff(MMCO) and permeability. This represents an improvement over existing permeability measurements that are based on the diffusion of a single type of solute. Specifically, the permeability of capsules based on alginate, cellulose sulfate, polymethylene-co-guanidine were characterized as a function of membrane thickness. Solid alginate beads were also evaluated. The MMCO of these capsules was estimated to be between 80 and 90 kDa using polymers, and between 116-150 kDa with proteins. Apparently, the globular shape of the proteins (radius of gyration (Rg) of 4.2-4.6 nm) facilitates their passage through the membrane, comparatively to the polysaccharide coil conformation (Rg of 6.5-8.3 nm). An increase of the capsule membrane thickness reduced these values. The MMCO of the beads, which do not have a membrane limiting their permselective properties, was higher, between 110 and 200 kDa with dextrans, and between 150 and 220 kDa with proteins. Therefore, although the permeability estimated with biologically relevant molecules is generally higher due to their lower radius of gyration, both the MMCO of synthetic and natural watersoluble polymers correlate well, and can be used as in vitro metrics for the immune protection ability of microcapsules and microbeads. This article shows, to the authors' knowledge, the first reported concordance between permeability measures based on model natural and biological macromolecules.

Conditioning of stochastic 3-D fracture networks to hydrological and geophysical data

The geometry and connectivity of fractures exert a strong influence on the flow and transport properties of fracture networks. We present a novel approach to stochastically generate three-dimensional discrete networks of connected fractures that are conditioned to hydrological and geophysical data. A hierarchical rejection sampling algorithm is used to draw realizations from the posterior probability density function at different conditioning levels. The method is applied to a well-studied granitic formation using data acquired within two boreholes located 6 m apart. The prior models include 27 fractures with their geometry (position and orientation) bounded by information derived from single-hole ground-penetrating radar (GPR) data acquired during saline tracer tests and optical televiewer logs. Eleven cross-hole hydraulic connections between fractures in neighboring boreholes and the order in which the tracer arrives at different fractures are used for conditioning. Furthermore, the networks are conditioned to the observed relative hydraulic importance of the different hydraulic connections by numerically simulating the flow response. Among the conditioning data considered, constraints on the relative flow contributions were the most effective in determining the variability among the network realizations. Nevertheless, we find that the posterior model space is strongly determined by the imposed prior bounds. Strong prior bounds were derived from GPR measurements and helped to make the approach computationally feasible. We analyze a set of 230 posterior realizations that reproduce all data given their uncertainties assuming the same uniform transmissivity in all fractures. The posterior models provide valuable statistics on length scales and density of connected fractures, as well as their connectivity. In an additional analysis, effective transmissivity estimates of the posterior realizations indicate a strong influence of the DFN structure, in that it induces large variations of equivalent transmissivities between realizations. The transmissivity estimates agree well with previous estimates at the site based on pumping, flowmeter and temperature data.

Molecular basis of interaction between Na,K-ATPase and FXYD proteins.

Résumé au large public Notre corps est constitué de différents types de cellules. La condition minimale ou primordiale pour la survie des cellules est d'avoir de l'énergie. Cette tâche est assumée en partie par une protéine qui se situe dans la membrane de chaque cellule. Nommé Na, K¬ATPase ou pompe à sodium, c'est une protéine pressente dans toutes les cellules chez les mammifères est composée de deux sous-unités, α et β. En transportant 3 ions de sodium hors de la cellule et 2 ions de potassium à l'intérieur de la cellule, elle transforme l'énergie chimique sous forme de l'ATP en énergie motrice, qui permet aux cellules par la suite d'échanger des matériaux entre l'espace intracellulaire et extracellulaire ainsi que d'ingérer des nutriments provenant de son environnement. Le manque de cette protéine chez la souris entraîne la mort de l'embryon. Des défauts fonctionnels de cette protéine sont responsables de plusieurs maladies humaines comme par exemple, un type de migraine. En dehors de sa fonction vitale, cette protéine est également engagée dans diverses activités physiologiques comme la contractilité musculaire, l'activité nerveuse et la régulation du volume sanguin. Vue l'importance de cette protéine, sa découverte par Jens C. Skou en 1957 a été honorée d'un Prix Noble de chimie quarante ans plus tard. Depuis lors, nous connaissons de mieux en mieux les mécanismes de fonctionnement de la Na, K-ATPase. Entre autre, sa régulation par une famille de protéines appelées protéines FXYD. Cette famille contient 7 membres (FXYD 1-7). L'un d'entre eux nommé FXYD 2 est lié à une maladie héréditaire connue sous le nom de hypomagnesemia. Nous disposons actuellement d'informations concernant les conséquences de la régulation par les protéines FXYD sur activité de la Na, K-ATPase, mais nous savons très peu sur le mode d'interaction entre les protéines FXYD et la Na, K-ATPase. Dans ce travail de thèse, nous avons réussi à localiser des zones d'interaction dans la sous- unité a de la Na, K-ATPase et dans FXYD 7. En même temps, nous avons déterminé un 3ème site de liaison spécifique au sodium de la Na, K-ATPase. Une partie de ce site se situe à l'intérieur d'un domaine protéique qui interagit avec les protéines FXYD. De plus, ce site a été démontré comme responsable d'un mécanisme de transport de la Na, K-ATPase caractérisé par un influx ionique. En conclusion, les résultats de ce travail de thèse fournissent de nouvelles preuves sur les régions d'interaction entre la Na, K-ATPase et les protéines FXYD. La détermination d'un 3ème site spécifique au sodium et sa relation avec un influx ionique offrent la possibilité 1) d'explorer les mécanismes avec lesquels les protéines FXYD régulent l'activité de la Na, ATPase et 2) de localiser un site à sodium qui est essentielle pour mieux comprendre l'organisation et le fonctionnement de la Na, K-ATPase. Résumé Les gradients de concentration de Na+ et de K+ à travers la membrane plasmatique des cellules animales sont cruciaux pour la survie et l'homéostasie de cellules. De plus, des fonctions cellulaires spécifiques telles que la reabsorption de Na dans le rein et le côlon, la contraction musculaire et l'excitabilité nerveuse dépendent de ces gradients. La Na, K¬ATPase ou pompe à sodium est une protéine membranaire ubiquitaire. Elle crée et maintient ces gradients en utilisant l'énergie obtenu par l'hydrolyse de l'adénosine triphosphate. L'unité fonctionnelle minimale de cette protéine se compose d'une sous-unité catalytique α et d'une sous-unité régulatrice β. Récemment, il a été montré que des membres de la famille FXYD, sont des régulateurs tissu-spécifiques de la Na, K-ATPase qui influencent ses propriétés de transport. Cependant, on connaît peu de chose au sujet de la nature moléculaire de l'interaction entre les protéines FXYD et la Na, K-ATPase. Dans cette étude, nous fournissons, pour la première fois, l'évidence directe que des résidus du domaine transmembranaire (TM) 9 de la sous-unité α de la Na, K-ATPase sont impliqués dans l'interaction fonctionnelle et structurale avec les protéines FXYD. De plus nous avons identifié des régions dans le domaine transmembranaire de FXYD 7 qui sont importantes pour l'association stable avec la Na, K-ATPase et une série de résidus responsables des régulations fonctionnelles. Nous avons aussi montré les contributions fonctionnelles du TM 9 de la Na, K-ATPase à la translocation de Na + en déterminant un 3ème site spécifique au Na+. Ce site se situe probablement dans un espace entre TM 9, TM 6 et TM 5 de la sous-unité α de la pompe à sodium. De plus, nous avons constaté que le 3ème site de Na + est fonctionnellement lié à un courant entrant de la pompe sensible à l'ouabaïne et activé par le pH acide. En conclusion, ce travail donne de nouvelles perspectives de l'interaction structurale et fonctionnelle entre les protéines FXYD et la Na, K-ATPase. En outre, les contributions fonctionnelles de TM 9 offrent de nouvelles possibilités pour explorer le mécanisme par lequel les protéines FXYD régulent les propriétés fonctionnelles de la Na, K-ATPase. La détermination du 3ème site au Na + fournit une compréhension avancée du site spécifique au Na + de la Na, K-ATPase et du mécanisme de transport de la Na, K-ATPase. Summary The Na+ and K+ gradients across the plasma membrane of animal cells are crucial for cell survival and homeostasis. Moreover, specific tissue functions such as Na+ reabsorption in kidney and colon, muscle contraction and nerve excitability depend on the maintenance of these gradients. Na, K-ATPase or sodium pump, an ubiquitous membrane protein, creates and maintains these gradients by using the energy from the hydrolysis of ATP. The minimal functional unit of this protein is composed of a catalytic α subunit and a regulatory β subunit. Recently, members of the FXYD family, have been reported to be tissue-specific regulators of Na, K-ATPase by influencing its transport properties. However, little is known about the molecular nature of the interaction between FXYD proteins and Na, K-ATPase. In this study, we provide, for the first time, direct evidence that residues from the transmembrane (TM) domain 9 of the α subunit of Na, K-ATPase are implicated in the functional and structural interaction with FXYD proteins. Moreover, we have identified regions in the TM domain of FXYD 7 important for the stable association with Na, K-ATPase and a stretch of residues responsible for the functional regulations. We have further revealed the functional contributions of TM 9 of the Na, K-ATPase α subunit to the Na+ translocation by determining a 3rd Na+-specific cation binding site. This site is likely in a space between TM 9, TM 6 and TM 5 of the a subunit of the sodium pump. Moreover, we have found that the 3rd Na+ binding site is functionally linked to an acidic pH- activated ouabain-sensitive inward pump current. In conclusion, this work gives new insights into the structural and functional interaction between FXYD proteins and Na, K-ATPase. Functional contributions of TM 9 offer new possibilities to explore the mechanism by which FXYD proteins regulate functional properties of Na, K-ATPase. The determination of the 3rd Na+ binding site provides an advanced understanding concerning the Na+ -specific binding site of Na, K-ATPase and the 3rd Na+ site related transport mechanism.

Functional roles of Na,K-ATPase subunits

PURPOSE OF REVIEW: Na,K-ATPase is an oligomeric protein composed of alpha subunits, beta subunits and FXYD proteins. The catalytic alpha subunit hydrolyzes ATP and transports the cations. Increasing experimental evidence suggest that beta subunits and FXYD proteins essentially contribute to the variable physiological needs of Na,K-ATPase function in different tissues. RECENT FINDINGS: Beta subunits have a crucial role in the structural and functional maturation of Na,K-ATPase and modulate its transport properties. The chaperone function of the beta subunit is essential, for example, in the formation of tight junctions and cell polarity. Recent studies suggest that beta subunits also have inherent functions, which are independent of Na,K-ATPase activity and which may be involved in cell-cell adhesiveness and in suppression of cell motility. As for FXYD proteins, they modulate Na,K-ATPase activity in a tissue-specific way, in some cases in close cooperation with posttranslational modifications such as phosphorylation. SUMMARY: A better understanding of the multiple functional roles of the accessory subunits of Na,K-ATPase is crucial to appraise their influence on physiological processes and their implication in pathophysiological states

The second law of thermodynamics and the global climate system : A review of the maximum entropy production principle

The long-term mean properties of the global climate system and those of turbulent fluid systems are reviewed from a thermodynamic viewpoint. Two general expressions are derived for a rate of entropy production due to thermal and viscous dissipation (turbulent dissipation) in a fluid system. It is shown with these expressions that maximum entropy production in the Earth s climate system suggested by Paltridge, as well as maximum transport properties of heat or momentum in a turbulent system suggested by Malkus and Busse, correspond to a state in which the rate of entropy production due to the turbulent dissipation is at a maximum. Entropy production due to absorption of solar radiation in the climate system is found to be irrelevant to the maximized properties associated with turbulence. The hypothesis of maximum entropy production also seems to be applicable to the planetary atmospheres of Mars and Titan and perhaps to mantle convection. Lorenz s conjecture on maximum generation of available potential energy is shown to be akin to this hypothesis with a few minor approximations. A possible mechanism by which turbulent fluid systems adjust themselves to the states of maximum entropy production is presented as a selffeedback mechanism for the generation of available potential energy. These results tend to support the hypothesis of maximum entropy production that underlies a wide variety of nonlinear fluid systems, including our planet as well as other planets and stars

A novel human aquaporin-4 splice variant exhibits a dominant-negative activity: a new mechanism to regulate water permeability.

Two major isoforms of aquaporin-4 (AQP4) have been described in human tissue. Here we report the identification and functional analysis of an alternatively spliced transcript of human AQP4, AQP4-Δ4, that lacks exon 4. In transfected cells AQP4-Δ4 is mainly retained in the endoplasmic reticulum and shows no water transport properties. When AQP4-Δ4 is transfected into cells stably expressing functional AQP4, the surface expression of the full-length protein is reduced. Furthermore, the water transport activity of the cotransfectants is diminished in comparison to transfectants expressing only AQP4. The observed down-regulation of both the expression and water channel activity of AQP4 is likely to originate from a dominant-negative effect caused by heterodimerization between AQP4 and AQP4-Δ4, which was detected in coimmunoprecipitation studies. In skeletal muscles, AQP4-Δ4 mRNA expression inversely correlates with the level of AQP4 protein and is physiologically associated with different types of skeletal muscles. The expression of AQP4-Δ4 may represent a new regulatory mechanism through which the cell-surface expression and therefore the activity of AQP4 can be physiologically modulated.