Análise não-linear do campo de temperaturas desenvolvidas durante a soldagem do tipo TIG contínuo em placas delgadas

This study offers an analytical approach in order to provide a determination of the temperature field developed during the DC TIG welding of a thin plate of aluminum. The non-linear characteristics of the phenomenon, such as the dependence of the thermophysical and mechanical properties with temperature were considered in this study. In addition to the conductive heat exchange process, were taken into account the exchange by natural convection and radiation. A transient analysis is performed in order to obtain the temperature field as a function of time. It is also discussed a three-dimensional modeling of the heat source. The results obtained from the analytical model were be compared with the experimental ones and those available in the literature. The analytical results show a good correlation with the experimental ones available in the literature, thus proving the feasibility and efficiency of the analytical method for the simulation of the heat cycle for this welding process.

Influência da absorção de umidade no comportamento mecânico nos compósitos poliméricos híbridos Kevlar/vidro quando imerso em água do mar e petróleo

The polymer matrix composite materials are being used on a large scale in the most different industrial fields such as aerospace, automotive, oil, among others, since the industrial perspectives is currently working with materials which have a good mechanical performance at high service life and cost / benefit. Thus, the determination of the mechanical properties is indispensable for the characterization of waste resulting in greater expansion of this type of material. Thus, this work will be obtained three plates laminated with tereftálica polymeric matrix reinforced by a bidirectional woven E-glass and kevlar both industrially made, where the plates are manufactured by manual lamination process (hand lay-up), all laminates have five enhancement layers, the first hybrid laminate will consist of bidirectional woven E-glass fiber, kevlar fiber interspersed with layers, is formed by the second bidirectional woven kevlar fiber at the ends of the laminate (two layers), and in the center the glass fiber fabric (three layers), the third plate is composed of only the bidirectional woven E-glass fiber. Then were prepared specimens (CP) by standard, to determine the mechanical properties of tensile and bending in three points. After fabrication of the specimens, they were immersed in oil and seawater. After that, there was a comparison of the mechanical properties for the test condition in the dry state. Showing that there was a considerable increase in the properties studied because the effect of hybridization in laminates.

Caracterização e separação física de placas de circuito impresso de computadores obsoletos

The unbridled consumption of electronic equipment associated with fast immersion of new technologies on the market leads to the accelerated growth of electronic waste. Such waste mostly contains printed circuit boards in its structure. Printed circuit boards have many metals, including heavy metals, being highly toxic. Electronic waste is discarded improperly and indiscriminately, usually without any previous treatment and with other municipal waste, contaminating the environment and causing serious problems to human health. Beyond these metals, there are also precious metals and high value-added basis, that can be recovered and recycled, reducing the exploration of natural resources. Thus, due to the high growth potential and reuse of these waste treatment processes, characterization and separation were applied to the printed circuit boards. The printed circuit boards were subjected to physical treatments such as dismantling, crushing, sizing separation, magnetic separation and chemical treatments such as pyrolysis and leaching. Through characterization process (pyrolysis and leaching) the proportions of the components of the granulometric range were determined: 46,08% of metals; 23,32% of polymers and 30,60% of ceramics. It was also observed by particle size separation that metal components tend to concentrate in coarse fractions, while polymeric and ceramic components in fine fractions. From the magnetic separation process was obtained 12,08% of magnetic material and 82,33% of non-magnetic material.

Obtenção, caracterização e utilização de um compósito com matriz de resina poliéster e carga de fibras de sisal

The constant search for sustainable alternatives has earned great effort of researchers in research and obtaining new materials, encouraging the rise of eco-friendly productive development and providing simple and practical solutions to economic profitability. In this sense, the use of materials derived from natural renewable sources, vegetables, has great potential applicability to sustainable development. As alternative materials plant fibers can be applied to production of a range of composite materials easing the use of materials derived from non-renewable this thesis were sisal mats used for achieving a composite matrix having as one orthophthalic polyester resin. The webs were subjected to surface treatment in boiling water for 15 minutes. The webs of sisal fibers used were, respectively, 5%, 10% and 15% of the composite weight. The composite was obtained and characterized mechanically and thermally to the chosen formulations. several plates of the composite to obtain the body of evidence for the characterization tests complying with the relevant rules were made. The obtained composites showed strength tensile and bending lower than the array, so it can be used where are required low load requests. The most significant result of the composite studied given to the impact energy absorption, far superior to the matrix used. Other properties were highlighted in oil absorption, and density. It proved the feasibility of obtaining the composite for the three formulations studied C5, C10 and C15 being the most feasible to C10. To demonstrate the feasibility of using composite were made a wall clock, a bench, a chair and a shelf, low mechanical stress structures. It was concluded that the sisal rugs exercised the load function in the composite.

Obtenção, caracterização e utilização de um compósito com matriz de resina poliéster e carga de fibras de sisal

The constant search for sustainable alternatives has earned great effort of researchers in research and obtaining new materials, encouraging the rise of eco-friendly productive development and providing simple and practical solutions to economic profitability. In this sense, the use of materials derived from natural renewable sources, vegetables, has great potential applicability to sustainable development. As alternative materials plant fibers can be applied to production of a range of composite materials easing the use of materials derived from non-renewable this thesis were sisal mats used for achieving a composite matrix having as one orthophthalic polyester resin. The webs were subjected to surface treatment in boiling water for 15 minutes. The webs of sisal fibers used were, respectively, 5%, 10% and 15% of the composite weight. The composite was obtained and characterized mechanically and thermally to the chosen formulations. several plates of the composite to obtain the body of evidence for the characterization tests complying with the relevant rules were made. The obtained composites showed strength tensile and bending lower than the array, so it can be used where are required low load requests. The most significant result of the composite studied given to the impact energy absorption, far superior to the matrix used. Other properties were highlighted in oil absorption, and density. It proved the feasibility of obtaining the composite for the three formulations studied C5, C10 and C15 being the most feasible to C10. To demonstrate the feasibility of using composite were made a wall clock, a bench, a chair and a shelf, low mechanical stress structures. It was concluded that the sisal rugs exercised the load function in the composite.

La colección de placas de linterna de Eduardo Hernández-Pacheco: propuesta de conservación y restauración

La gestión de un archivo fotográfico es un tema complejo, sobre todo en lo que se refiere a su conservación, ya que son muchos los factores que pueden llegar a influir en la preservación de una colección de estas características. Todos estos aspectos quedan reflejados en este trabajo, en el que se lleva a cabo el estudio de la colección de 3.000 placas de linterna de Eduardo Hernández-Pacheco, almacenada en dos archivadores de madera, y que actualmente se encuentra en la Biblioteca Histórica del Marqués de Valdecilla. En la revisión del estado de conservación, y dada la magnitud de la colección, se ha seleccionado un conjunto de 100 placas de linterna, recogiendo los datos obtenidos en una serie de gráficas y tablas que muestran de una forma visual y resumida el estudio realizado, todo ello a su vez acompañado de documentación fotográfica. Atendiendo a la variedad de estratos que conforman las placas de linterna, es fundamental realizar un análisis en profundidad de la tecnología de manufactura y el comportamiento de cada uno de los materiales constitutivos, ya que todo ello se debe tener en cuenta en la elaboración de la propuesta de conservación y restauración. Sin embargo, es la relación que con el paso del tiempo se establece entre el sistema de almacenaje y las fotografías donde radica la complejidad de este proyecto. Los archivadores de madera que conservan la colección desde el principio y que irremediablemente aportan a la misma un sentido de unidad y conjunto, en este caso, se ponen en entredicho por su falta de conveniencia para la conservación de las placas. Este estudio fue presentado por la autora como Trabajo de Fin de Grado de Conservación y Restauración del Patrimonio Cultural de la UCM, siendo tutora del mismo Silvia García Fernández-Villa.

Avaliação por Ultra-Som das Tensões Impostas por Flexão em uma Barra de Aço

Há um grande interesse na área de integridade estrutural na utilização de uma técnica não destrutiva capaz de determinar, de forma rápida e eficaz, se um componente estrutural encontra-se em condições de tensão trativa ou compressiva. Sabe-se que as tensões trativas são responsáveis pela propagação de trincas. O objetivo deste trabalho foi avaliar o estado de tensões em uma barra submetida a flexão, utilizando a técnica da birrefringência acústica. Os resultados evidenciaram que a técnica é efetiva, permitindo determinar de forma clara as regiões compressivas das trativas durante o carregamento na barra.

Otimização de um Decatador/Floculador de Placas Planas Verticais Empregando-se Traçadores Radiotivos

É apresentada metodologia para estudos e avaliações em tempo real, de unidades de estações de tratamento de esgoto (ETE) empregando-se traçadores radioativos. (...)

Avaliação e Otimização de um Tanque Decantador de Placas Paralelas Verticais Empregando-se Traçadores Radioativos

É apresentada metodologia para estudos e avaliações em tempo real, de unidades para dedantação de particulados sólidos em estações de tratamento de esgoto (ETE) empregando-se traçadores radioativos. Um tanque decantador foi construído e os testes foram realizados usando-se 110mAg e 140La na marcação da fase sólida do esgoto e a técnica permitiu levantar-se a curva resposta da unidade e as funções distribuição do tempo de residência (RTD) para diversas situações experimentais e também identificar problemas operacionais que interferem na qualidade final do processo de tratamento do efluente. Os resultados serviram como diretriz para elaborar uma nova configuração da unidade, tornando-a mais eficiente.

Estudo das propriedades mecânicas de laminados com cortiça micro-aglomerada

Esta tese desenvolveu-se a partir de uma proposta de uma conceituada empresa portuguesa especializada em kayaks e consistiu em desenvolver um laminado de base natural e com núcleo de cortiça, capaz de se assemelhar em termos mecanicos aos de fibra de vidro e resina epóxi já utilizados. Após uma alargada pesquisa de materiais e fornecedores, procedeu-se ao fabrico de várias placas diferentes. Os materiais de base foram o núcleo de cortiça, peles em fibra de linho e bio-resina epóxi. De modo a avaliar as respostas mecânicas em regime estático e dinamico, foram realizados ensaios de flexão e impacto. As conclusões obtidas após exaustiva análise dos resultados permitem concluir que os laminados naturais podem oferecer propriedades mecânicas interessantes e quiça rivalizar com os seus concorrentes sintéticos, mantendo as óbvias vantagens em termos de responsabilidade ambiental. Ficam também directrizes para o caso de se pretender o fabrico de um protótipo utilizando estes materiais.

Báculos e placas de xisto : os primórdios da sua investigação

Dá-se a conhecer a existência de uma litografia – a última de um conjunto de 10 representando dolmenes portugueses, relativa a materiais arqueológicos com eles relacionados. Trata-se das primeiras reproduções de um báculo e de quatro placas de xisto executadas em Portugal para publicação científica, a qual, contudo, não se veio a concretizar, em resultado da extinção em 1868 da Segunda Comissão Geológica de Portugal. Através da pesquisa bibliográfica foi possível traçar o percurso de tais exemplares desde a época em que se conservavam no museu da referida comissão até ao seu actual paradeiro no Museu Nacional de Arqueologia, passando pelo Museu da Escola Politécnica de Lisboa. Tal realidade reflecte as vicissitudes da investigação pré-histórica em Portugal na segunda metade do século XIX / inícios do século XX.

Casa de embalagem de placas planas recicladas e tetra pak®: alternativa econômica e viável para a produção integrada de morango.

De acordo com Brasil (1997a, 1997b), as áreas de manipulação de alimento, como as Casas de embalagens de morango, devem atender a uma série de critérios. Os pisos devem ser de material resistente ao trânsito, impermeáveis, laváveis, antiderrapantes, não possuírem frestas e serem fáceis de limpar ou desinfetar. As superfícieis devem ser de material de fácil higienização. Atualmente, na região produtora de morango de Atibaia e Jarinu (SP), grande parte das Casas de embalagem convencionais são precárias, feitas somente de uma estrutura de madeira sem revestimento, coberta por folhas de Tetra Pak® e chão de terra-batida. Essas Casas não oferecem as condições mínimas de higiene previstas pelas Portarias mencionadas nem nas Normas Técnicas Específicas da Produção Integrada de Morango - NTE-PIMo (BRASIL, 2008), que estão sendo adotadas por um grupo de produtores da região. Devido ao fato do chão não ser lavável e as madeiras não receberem tratamento, as construções inadequadas podem se transformar em locais de propagação de patógenos, colocando em risco a segurança do morango embalado. No entanto, a falta de recursos financeiros dos pequenos produtores limita a compra de materiais ideais e de alto custo (aço inoxidável, por exemplo), a serem utilizados na construção. O objetivo deste trabalho é apresentar uma proposta de construção de uma Casa de embalagem simples, economicamente viável e que atenda minimamente às normas e portarias mencionadas, usando materiais de baixo custo e disponíveis na região.

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

Estudo sobre as potencialidades de compósitos à base de gesso e fibras de coco seco para aplicação na construção civil

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load