An exploratory study of associations between Australian-Indian mothers’ use of controlling feeding practices, concerns and perceptions of children’s weight and children’s picky eating

Aim This cross-sectional study explores associations between migrant Indian mothers’ use of controlling feeding practices (pressure to eat, restriction and monitoring) and their concerns and perceptions regarding their children’s weight and picky eating behaviour. Methods Two hundred and thirty mothers with children aged 1-5 years, residing in Australia for 1-8 years, participated by completing a self-reported questionnaire. Results Perceptions and concerns regarding children’s weight were not associated with any of the controlling feeding practices. A positive association was noted between pressure feeding and perceptions of pickiness after adjusting for covariates: children’s age, gender and weight-for-age Z-score. Girls, older children, and children with higher weight-for-age z scores were pressure fed to a greater extent. Conclusions This study supports the generalisation of findings from Caucasian literature that pressure feeding and perceptions of pickiness are positively related.

Adaption of horses to a novel dynamic feeding system : movement and behavioural responses

Reasons for performing study: Many domestic horses and ponies are sedentary and obese due to confinement to small paddocks and stables and a diet of infrequent, high-energy rations. Severe health consequences can be associated with this altered lifestyle. Objectives: The aims of this study were to investigate the ability of horses to learn to use a dynamic feeder system and determine the movement and behavioural responses of horses to the novel system. Methods: A dynamic feed station was developed to encourage horses to exercise in order to access ad libitum hay. Five pairs of horses (n = 10) were studied using a randomised crossover design with each pair studied in a control paddock containing a standard hay feeder and an experimental paddock containing the novel hay feeder. Horse movement was monitored by a global positioning system (GPS) and horses observed and their ability to learn to use the system and the behavioural responses to its use assessed. Results: With initial human intervention all horses used the novel feeder within 1 h. Some aggressive behaviour was observed between horses not well matched in dominance behaviour. The median distance walked by the horses was less (P = 0.002) during a 4 h period (117 [57–185] m) in the control paddock than in the experimental paddock (630 [509–719] m). Conclusions: The use of an automated feeding system promotes increased activity levels in horses housed in small paddocks, compared with a stationary feeder.

Distances travelled by feral horses in ‘outback’ Australia

Reasons for performing study: The distance travelled by Australian feral horses in an unrestricted environment has not previously been determined. It is important to investigate horse movement in wilderness environments to establish baseline data against which the movement of domestically managed horses and wild equids can be compared. Objectives: To determine the travel dynamics of 2 groups of feral horses in unrestricted but different wilderness environments. Methods: Twelve feral horses living in 2 wilderness environments (2000 vs. 20,000 km2) in outback Australia were tracked for 6.5 consecutive days using custom designed, collar mounted global positioning systems (GPS). Collars were attached after darting and immobilising the horses. The collars were recovered after a minimum of 6.5 days by re-darting the horses. Average daily distance travelled was calculated. Range use and watering patterns of horses were analysed by viewing GPS tracks overlaid on satellite photographs of the study area. Results: Average distance travelled was 15.9 ± 1.9 km/day (range 8.1–28.3 km/day). Horses were recorded up to 55 km from their watering points and some horses walked for 12 h to water from feeding grounds. Mean watering frequency was 2.67 days (range 1–4 days). Central Australian horses watered less frequently and showed a different range use compared to horses from central Queensland. Central Australian horses walked for long distances in direct lines to patchy food sources whereas central Queensland horses were able to graze close to water sources and moved in a more or less circular pattern around the central water source. Conclusions: The distances travelled by feral horses were far greater than those previously observed for managed domestic horses and other species of equid. Feral horses are able to travel long distances and withstand long periods without water, allowing them to survive in semi-arid conditions.

The effect of exercise repetition on the frequency characteristics of motor output force : Implications for Achilles tendinopathy rehabilitation

Objectives: To investigate the frequency characteristics of the ground reaction force (GRF) recorded throughout the eccentric Achilles tendon rehabilitation programme described by Alfredson. Design: Controlled laboratory study, longitudinal. Methods: Nine healthy adult males performed six sets (15 repetitions per set) of eccentric ankle exercise. Ground reaction force was recorded throughout the exercise protocol. For each exercise repetition the frequency power spectrum of the resultant ground reaction force was calculated and normalised to total power. The magnitude of peak relative power within the 8-12 Hz bandwidth and the frequency at which this peak occurred was determined. Results: The magnitude of peak relative power within the 8-12 Hz bandwidth increased with each successive exercise set and following the 4th set (60 repetitions) of exercise the frequency at which peak relative power occurred shifted from 9 to 10 Hz. Conclusions: The increase in magnitude and frequency of ground reaction force vibrations with an increasing number of exercise repetitions is likely connected to changes in muscle activation with fatigue and tendon conditioning. This research illustrates the potential for the number of exercise repetitions performed to influence the tendons' mechanical environment, with implications for tendon remodelling and the clinical efficacy of eccentric rehabilitation programmes for Achilles tendinopathy.

How much is enough? The effect of exercise repetition on the force frequency characteristics of eccentric exercise used for tendinopathy rehabilitation

Introduction: Eccentric exercise (EE) is a commonly used treatment for Achilles tendinopathy. While vibrations in the 8–12 Hz frequency range generated during eccentric muscle actions have been put forward as a potential mechanism for the beneficial effect of EE, optimal loading parameters required to expedite recovery are currently unknown. Alfredson's original protocol employed 90 repetitions of eccentric loading, however abbreviated protocols consisting of fewer repetitions (typically 45) have been developed, albeit with less beneficial effect. Given that 8–12 Hz vibrations generated during isometric muscle actions have been previously shown to increase with fatigue, this research evaluated the effect of exercise repetition on motor output vibrations generated during EE by investigating the frequency characteristics of ground reaction force (GRF) recorded throughout the 90 repetitions of Alfredson's protocol. Methods: Nine healthy adult males performed six sets (15 repetitions per set) of eccentric ankle exercise. GRF was recorded at a frequency of 1000 Hz throughout the exercise protocol. The frequency power spectrum of the resultant GRF was calculated and normalized to total power. Relative spectral power was summed over 1 Hz widows within the frequency rage 7.5–11.5 Hz. The effect of each additional exercise set (15 repetitions) on the relative power within each widow was investigated using a general linear modelling approach. Results: The magnitude of peak relative power within the 7.5–11.5 Hz bandwidth increased across the six exercise sets from 0.03 in exercise set one to 0.12 in exercise set six (P < 0.05). Following the 4th set of exercise the frequency at which peak relative power occurred shifted from 9 to 10 Hz. Discussion: This study has demonstrated that successive repetitions of eccentric loading over six exercise sets results in an increase in the amplitude of motor output vibrations in the 7.5–11.5 Hz bandwidth, with an increase in the frequency of these vibrations occurring after the 4th set (60th repetition). These findings are consistent with findings from previous studies of muscle fatigue. Assuming that the magnitude and frequency of these vibrations represent important stimuli for tendon remodelling as hypothesized within the literature, the findings of this study question the role of abbreviated EE protocols and raise the question; can EE protocols for tendinopathy be optimized by performing eccentric loading to fatigue?

Achilles tendinopathy modulates force frequency characteristics of eccentric exercise

Introduction Previous research has demonstrated that ground reaction force (GRF) recorded during eccentric ankle exercise is characterised by greater power in the 8-12Hz bandwidth when compared to that recorded during concentric ankle exercise. Subsequently, it was suggested that vibrations in this bandwidth may underpin the beneficial effect of eccentric loading in tendon repair. However, this observation has been made only in individuals without Achilles tendinopathy. This research compared the force frequency characteristics of eccentric and concentric exercises in individuals with and without Achilles tendinopathy., Methods Eleven male adults with unilateral mid-portion Achilles tendinopathy and nine control male adults without tendinopathy participated in the research. Kinematics and GRF were recorded while the participants performed a common eccentric rehabilitation exercise protocol and a concentric equivalent. Ankle joint kinematics and the frequency power spectrum of the resultant GRF were calculated. Results Eccentric exercise was characterised by a significantly greater proportion of spectral power between 4.5 and 11.5Hz when compared to concentric exercise. There were no significant differences between limbs in the force frequency characteristics of concentric exercise. Eccentric exercise, in contrast, was defined by a shift in the power spectrum of the symptomatic limb, resulting in a second spectral peak at 9Hz, rather than 10Hz in the control limb. Conclusions Compared to healthy tendon, Achilles tendinopathy was characterised by lower frequency vibrations during eccentric rehabilitation exercises. This finding may be associated with changes in neuromuscular activation and tendon stiffness which have been shown to occur with tendinopathy and provides a possible rationale for the previous observation of a different biochemical response to eccentric exercise in healthy and injured Achilles tendons., (C)2012The American College of Sports Medicine

Outcomes of an early feeding practices intervention to prevent childhood obesity

Objective Use a randomised controlled trial (RCT) to evaluate outcomes of a universal intervention to promote protective feeding practices, which commenced in infancy and aimed to prevent childhood obesity Subjects and Methods The NOURISH RCT enrolled 698 first-time mothers (mean age 30.1 years, SD=5.3) with healthy term infants (51% female) aged 4.3 (SD=1.0) months at baseline. Mothers were randomly allocated to self-directed access to usual care or to attend two 6-session interactive group education modules that provided anticipatory guidance on early feeding practices. Outcomes were assessed six months after completion of the second information module, 20 months from baseline and when the children were two years old. Maternal feeding practices were self-reported using validated questionnaires and study-developed items. Study-measured child height and weight were used to calculate BMI Z-score. Results Retention at follow-up was 78%. Mothers in the intervention group reported using responsive feeding more frequently on 6/9 subscales and 8/8 items (Ps ≤.03) and overall less ‘controlling feeding practices’ (P<.001). They also more frequently used feeding practices (3/4 items; Ps <.01) likely to enhance food acceptance. No statistically significant differences were noted in anthropometric outcomes (BMI Z-score: P=.11), nor in prevalence of overweight/obesity (control 17.9% vs. intervention 13.8%, P=.23). Conclusions Evaluation of NOURISH at child age two years found that anticipatory guidance on complementary feeding, tailored to developmental stage, increased use by first-time mothers of 'protective' feeding practices that potentially support the development of healthy eating and growth patterns in young children.

Improving ultrasound excitation systems using a flexible power supply with adjustable voltage and frequency to drive piezoelectric transducers

The ability of a piezoelectric transducer in energy conversion is rapidly expanding in several applications. Some of the industrial applications for which a high power ultrasound transducer can be used are surface cleaning, water treatment, plastic welding and food sterilization. Also, a high power ultrasound transducer plays a great role in biomedical applications such as diagnostic and therapeutic applications. An ultrasound transducer is usually applied to convert electrical energy to mechanical energy and vice versa. In some high power ultrasound system, ultrasound transducers are applied as a transmitter, as a receiver or both. As a transmitter, it converts electrical energy to mechanical energy while a receiver converts mechanical energy to electrical energy as a sensor for control system. Once a piezoelectric transducer is excited by electrical signal, piezoelectric material starts to vibrate and generates ultrasound waves. A portion of the ultrasound waves which passes through the medium will be sensed by the receiver and converted to electrical energy. To drive an ultrasound transducer, an excitation signal should be properly designed otherwise undesired signal (low quality) can deteriorate the performance of the transducer (energy conversion) and increase power consumption in the system. For instance, some portion of generated power may be delivered in unwanted frequency which is not acceptable for some applications especially for biomedical applications. To achieve better performance of the transducer, along with the quality of the excitation signal, the characteristics of the high power ultrasound transducer should be taken into consideration as well. In this regard, several simulation and experimental tests are carried out in this research to model high power ultrasound transducers and systems. During these experiments, high power ultrasound transducers are excited by several excitation signals with different amplitudes and frequencies, using a network analyser, a signal generator, a high power amplifier and a multilevel converter. Also, to analyse the behaviour of the ultrasound system, the voltage ratio of the system is measured in different tests. The voltage across transmitter is measured as an input voltage then divided by the output voltage which is measured across receiver. The results of the transducer characteristics and the ultrasound system behaviour are discussed in chapter 4 and 5 of this thesis. Each piezoelectric transducer has several resonance frequencies in which its impedance has lower magnitude as compared to non-resonance frequencies. Among these resonance frequencies, just at one of those frequencies, the magnitude of the impedance is minimum. This resonance frequency is known as the main resonance frequency of the transducer. To attain higher efficiency and deliver more power to the ultrasound system, the transducer is usually excited at the main resonance frequency. Therefore, it is important to find out this frequency and other resonance frequencies. Hereof, a frequency detection method is proposed in this research which is discussed in chapter 2. An extended electrical model of the ultrasound transducer with multiple resonance frequencies consists of several RLC legs in parallel with a capacitor. Each RLC leg represents one of the resonance frequencies of the ultrasound transducer. At resonance frequency the inductor reactance and capacitor reactance cancel out each other and the resistor of this leg represents power conversion of the system at that frequency. This concept is shown in simulation and test results presented in chapter 4. To excite a high power ultrasound transducer, a high power signal is required. Multilevel converters are usually applied to generate a high power signal but the drawback of this signal is low quality in comparison with a sinusoidal signal. In some applications like ultrasound, it is extensively important to generate a high quality signal. Several control and modulation techniques are introduced in different papers to control the output voltage of the multilevel converters. One of those techniques is harmonic elimination technique. In this technique, switching angles are chosen in such way to reduce harmonic contents in the output side. It is undeniable that increasing the number of the switching angles results in more harmonic reduction. But to have more switching angles, more output voltage levels are required which increase the number of components and cost of the converter. To improve the quality of the output voltage signal with no more components, a new harmonic elimination technique is proposed in this research. Based on this new technique, more variables (DC voltage levels and switching angles) are chosen to eliminate more low order harmonics compared to conventional harmonic elimination techniques. In conventional harmonic elimination method, DC voltage levels are same and only switching angles are calculated to eliminate harmonics. Therefore, the number of eliminated harmonic is limited by the number of switching cycles. In the proposed modulation technique, the switching angles and the DC voltage levels are calculated off-line to eliminate more harmonics. Therefore, the DC voltage levels are not equal and should be regulated. To achieve this aim, a DC/DC converter is applied to adjust the DC link voltages with several capacitors. The effect of the new harmonic elimination technique on the output quality of several single phase multilevel converters is explained in chapter 3 and 6 of this thesis. According to the electrical model of high power ultrasound transducer, this device can be modelled as parallel combinations of RLC legs with a main capacitor. The impedance diagram of the transducer in frequency domain shows it has capacitive characteristics in almost all frequencies. Therefore, using a voltage source converter to drive a high power ultrasound transducer can create significant leakage current through the transducer. It happens due to significant voltage stress (dv/dt) across the transducer. To remedy this problem, LC filters are applied in some applications. For some applications such as ultrasound, using a LC filter can deteriorate the performance of the transducer by changing its characteristics and displacing the resonance frequency of the transducer. For such a case a current source converter could be a suitable choice to overcome this problem. In this regard, a current source converter is implemented and applied to excite the high power ultrasound transducer. To control the output current and voltage, a hysteresis control and unipolar modulation are used respectively. The results of this test are explained in chapter 7.

Damage identification and condition assessment of building structures using frequency response functions and neural networks

This thesis investigated the viability of using Frequency Response Functions in combination with Artificial Neural Network technique in damage assessment of building structures. The proposed approach can help overcome some of limitations associated with previously developed vibration based methods and assist in delivering more accurate and robust damage identification results. Excellent results are obtained for damage identification of the case studies proving that the proposed approach has been developed successfully.

Generalized-positioning for mixed-frequency of mixed-GNSS and its preliminary applications

Modernized GPS and GLONASS, together with new GNSS systems, BeiDou and Galileo, offer code and phase ranging signals in three or more carriers. Traditionally, dual-frequency code and/or phase GPS measurements are linearly combined to eliminate effects of ionosphere delays in various positioning and analysis. This typical treatment method has imitations in processing signals at three or more frequencies from more than one system and can be hardly adapted itself to cope with the booming of various receivers with a broad variety of singles. In this contribution, a generalized-positioning model that the navigation system independent and the carrier number unrelated is promoted, which is suitable for both single- and multi-sites data processing. For the synchronization of different signals, uncalibrated signal delays (USD) are more generally defined to compensate the signal specific offsets in code and phase signals respectively. In addition, the ionospheric delays are included in the parameterization with an elaborate consideration. Based on the analysis of the algebraic structures, this generalized-positioning model is further refined with a set of proper constrains to regularize the datum deficiency of the observation equation system. With this new model, uncalibrated signal delays (USD) and ionospheric delays are derived for both GPS and BeiDou with a large dada set. Numerical results demonstrate that, with a limited number of stations, the uncalibrated code delays (UCD) are determinate to a precision of about 0.1 ns for GPS and 0.4 ns for BeiDou signals, while the uncalibrated phase delays (UPD) for L1 and L2 are generated with 37 stations evenly distributed in China for GPS with a consistency of about 0.3 cycle. Extra experiments concerning the performance of this novel model in point positioning with mixed-frequencies of mixed-constellations is analyzed, in which the USD parameters are fixed with our generated values. The results are evaluated in terms of both positioning accuracy and convergence time.

Count-min sketches for estimating password frequency within Hamming distance two

The count-min sketch is a useful data structure for recording and estimating the frequency of string occurrences, such as passwords, in sub-linear space with high accuracy. However, it cannot be used to draw conclusions on groups of strings that are similar, for example close in Hamming distance. This paper introduces a variant of the count-min sketch which allows for estimating counts within a specified Hamming distance of the queried string. This variant can be used to prevent users from choosing popular passwords, like the original sketch, but it also allows for a more efficient method of analysing password statistics.

Feeding attitudes, practices and traditional dietary beliefs of Chinese mothers with young children in Australia : a mixed methods study

Background and Objectives Obesity and some dietary related diseases are emerging health problems among Chinese immigrants and their children in developed countries. These health problems are closely linked to eating habits, which are established in the early years of life. Young children’s eating habits are likely to persist into later childhood and youth. Family environment and parental feeding practices have a strong effect on young children’s eating habits. Little information is available on the early feeding practices of Chinese mothers in Australia. The aim of this study was to understand the dietary beliefs, feeding attitudes and practices of Chinese mothers with young children who were recent immigrants to Australia. Methods Using a sequential explanatory design, this mixed methods study consisted of two distinct phases. Phase 1 (quantitative): 254 Chinese immigrant mothers of children aged 12 to 59 months completed a cross-sectional survey. The psychometric properties and factor structure of a Chinese version of the Child Feeding Questionnaire (CFQ, by Birch et al. 2001) were assessed and used to measure specific maternal feeding attitudes and controlling feeding practices. Other questions were developed from the literature and used to explore maternal traditional dietary beliefs and feeding practices related to their beliefs, perceptions of picky eating in children and a range of socioeconomic and acculturation factors. Phase 2 (qualitative): 21 mothers took part in a follow-up telephone interview to assist in explaining and interpreting some significant findings obtained in the first phase. Results Chinese mothers held strong traditional dietary beliefs and fed their children according to these beliefs. However, children’s consumption of non-core foods was high. Both traditional Chinese and Australian style foods were consumed by their children. Confirmatory factor analysis revealed that the original 7-factor model of the CFQ provided an acceptable fit to the data with minor modification. However, an alternative model with eight constructs in which two items related to using food rewards were separated from the original restriction construct, not only provided an acceptable fit to the data, but also improved the conceptual clarity of the constructs. The latter model included 24 items loading onto the following eight constructs: restriction, pressure to eat, monitoring, use of food rewards, perceived responsibility, perception of own weight, perception of child’s weight, and concern about child becoming overweight. The internal consistency of the constructs was acceptable or desirable (Cronbach’s α = .60 - .93). Mothers reported low levels of concern about their child overeating or becoming overweight, but high levels of controlling feeding practices: restriction, monitoring, pressure to eat and use of food rewards. More than one quarter of mothers misinterpreted their child’s weight status (based on mothers’ self-reported data). In addition, mothers’ controlling feeding practices independently predicted half of the variance and explained 16% of the variance in child weight status: pressuring the child to eat was negatively associated with child weight status (β = -0.30, p < .01) and using food rewards was positively associated with child weight status (β = 0.20, p < .05) after adjusting for maternal and child covariates. Monitoring and restriction were not associated with child weight status. Mothers’ perceptions of their child’s weight were positively associated with child weight status (β = 0.33, p < .01). Moreover, mothers reported that they mostly decided what (65%) and how much (80%) food their child ate. Mothers who decided what food their child ate were more likely to monitor (β = -0.17, p < .05) and restrict (β = -0.17, p < .05) their child’s food consumption. Mothers who let their child decide how much food their child ate were less likely to pressure their child to eat (β = -0.38, p < .01) and use food rewards (β = -0.24, p < .01). Mothers’ perceptions of picky eating behaviour were positively associated with their use of pressure (β = 0.21, p < .01) and negatively associated with monitoring (β = -0.16, p < .05) and perceptions of their child’s weight status (β = -0.13, p < .05). Qualitative data showed that pressuring to eat, monitoring and restriction of the child’s food consumption were common practices among these mothers. However, mothers stated that their motivation for monitoring and restricting was to ensure the child’s general health. Mothers’ understandings of picky eating behaviour in their children were consistent with the literature and they reported multiple feeding strategies to deal with it. Conclusion Chinese immigrant mothers demonstrated strong traditional dietary beliefs, a low level of concern for child weight, misperceptions of child weight status, and a high overall level of control in child feeding in this study. The Chinese version of the CFQ, which consists of eight constructs and distinguishes between the constructs using food rewards and restriction, is an appropriate instrument to assess feeding attitudes and controlling feeding practices among Chinese immigrant mothers of young children in Australia. Mothers’ feeding attitudes and practices were associated with children’s weight status and mothers’ perceptions of picky eating behaviour in children after adjusting for a range of socio-demographic maternal and child characteristics. Monitoring and restriction of children’s food consumption according to food selection may be positive feeding practices, whereas pressuring to eat and using food rewards appeared to be negative feeding practices in this study. In addition, the results suggest that these young children have high exposure to energy-dense, nutrient-poor food. There is a need to develop and implement nutrition interventions to improve maternal feeding practices and the dietary quality among children of Chinese immigrant mothers in Australia.

Mothers' perceptions of introducing solids to their infant at six months of age : identifying critical belief-based targets to promote adherence to current infant feeding guidelines

We investigated critical belief-based targets for promoting the introduction of solid foods to infants at six months. First-time mothers (N = 375) completed a Theory of Planned Behaviour belief-based questionnaire and follow-up questionnaire assessing the age the infant was first introduced to solids. Normative beliefs about partner/spouse (β = 0.16) and doctor (β = 0.22), and control beliefs about commercial baby foods available for infants before six months (β = −0.20), predicted introduction of solids at six months. Intervention programs should target these critical beliefs to promote mothers’ adherence to current infant feeding guidelines to introduce solids at around six months.

The genetics of endurance : frequency of the ACTN3 R577X variant in Ironman World Championship athletes

Objectives To investigate the frequency of the ACTN3 R577X polymorphism in elite endurance triathletes, and whether ACTN3 R577X is significantly associated with performance time. Design Cross-sectional study. Methods Saliva samples, questionnaires, and performance times were collected for 196 elite endurance athletes who participated in the 2008 Kona Ironman championship triathlon. Athletes were of predominantly North American, European, and Australian origin. A one-way analysis of variance was conducted to compare performance times between genotype groups. Multiple linear regression analysis was performed to model the effect of questionnaire variables and genotype on performance time. Genotype and allele frequencies were compared to results from different populations using the chi-square test. Results Performance time did not significantly differ between genotype groups, and age, sex, and continent of origin were significant predictors of finishing time (age and sex: p < 5 × 10−6; continent: p = 0.003) though genotype was not. Genotype and allele frequencies obtained (RR 26.5%, RX 50.0%, XX 23.5%, R 51.5%, X 48.5%) were found to be not significantly different from Australian, Spanish, and Italian endurance athletes (p > 0.05), but were significantly different from Kenyan, Ethiopian, and Finnish endurance athletes (p < 0.01). Conclusions Genotype and allele frequencies agreed with those reported for endurance athletes of similar ethnic origin, supporting previous findings for an association between 577X allele and endurance. However, analysis of performance time suggests that ACTN3 does not alone influence endurance performance, or may have a complex effect on endurance performance due to a speed/endurance trade-off.

High frequency high power converters for industrial applications

The main contribution of this project was to investigate power electronics technology in designing and developing high frequency high power converters for industrial applications. Therefore, the research was conducted at two levels; first at system level which mainly encapsulated the circuit topology and control scheme and second at application level which involves with real-world applications. Pursuing these objectives, varied topologies have been developed and proposed within this research. The main aim was to resolving solid-state switches limited power rating and operating speed while increasing the system flexibility considering the application characteristics. The developed new power converter configurations were applied to pulsed power and high power ultrasound applications for experimental validation.