Construction of occluded recombinant baculoviruses containing the full-length cry1Ab and cry1Ac genes from Bacillus thuringiensis

The administration of baculoviruses to insects for bioassay purposes is carried out, in most cases, by contamination of food surfaces with a known amount of occlusion bodies (OBs). Since per os infection is the natural route of infection, occluded recombinant viruses containing crystal protein genes (cry1Ab and cry1Ac) from Bacillus thuringiensis were constructed for comparison with the baculovirus prototype Autographa californica nucleopolyhedrovirus (AcNPV). The transfer vector pAcUW2B was used for construction of occluded recombinant viruses. The transfer vector containing the crystal protein genes was cotransfected with linearized DNA from a non-occluded recombinant virus. The isolation of recombinant viruses was greatly facilitated by the reduction of background "wild type" virus and the increased proportion of recombinant viruses. Since the recombinant viruses containing full-length and truncated forms of the crystal protein genes did not seem to improve the pathogenicity of the recombinant viruses when compared with the wild type AcNPV, and in order to compare expression levels of the full-length crystal proteins produced by non-occluded and occluded recombinant viruses the full-length cry1Ab and cry1Ac genes were chosen for construction of occluded recombinant viruses. The recombinant viruses containing full-length and truncated forms of the crystal protein genes did not seem to improve its pathogenicity but the size of the larvae infected with the recombinant viruses was significantly smaller than that of larvae infected with the wild type virus.

Comparison of AutoSetä and polysomnography for the detection of apnea-hypopnea events

The use of the flow vs time relationship obtained with the nasal prongs of the AutoSetä (AS) system (diagnosis mode) has been proposed to detect apneas and hypopneas in patients with reasonable nasal patency. Our aim was to compare the accuracy of AS to that of a computerized polysomnographic (PSG) system. The study was conducted on 56 individuals (45 men) with clinical characteristics of obstructive sleep apnea (OSA). Their mean (± SD) age was 44.6 ± 12 years and their body mass index was 31.3 ± 7 kg/m2. Data were submitted to parametric analysis to determine the agreement between methods and the intraclass correlation coefficient was calculated. The Student t-test and Bland and Altman plots were also used. Twelve patients had an apnea-hypopnea index (AHI) <10 in bed and 20 had values >40. The mean (± SD) AHI PSG index of 37.6 (28.8) was significantly lower (P = 0.0003) than AHI AS (41.8 (25.3)), but there was a high intraclass correlation coefficient (0.93), with 0.016 variance. For a threshold of AHI of 20, AS showed 73.0% accuracy, 97% sensitivity and 60% specificity, with positive and negative predictive values of 78% and 93%, respectively. Sensitivity, specificity and negative predictive values increased in parallel to the increase in AHI threshold for detecting OSA. However, when the differences of AHI PSG-AS were plotted against their means, the limits of agreement between the methods (95% of the differences) were +13 and -22, showing the discrepancy between the AHI values obtained with PSG and AS. Finally, cubic regression analysis was used to better predict the result of AHI PSG as a function of the method proposed, i.e., AHI AS. We conclude that, despite these differences, AHI measured by AutoSetä can be useful for the assessment of patients with high pre-test clinical probability of OSA, for whom standard PSG is not possible as an initial step in diagnosis.

The availability of full match sibling donors and feasibility of allogeneic bone marrow transplantation in Brazil

The feasibility of allogeneic bone marrow transplantation (alloBMT) in a developing country has not yet been demonstrated. Many adverse factors including social and economic limitations may reduce the overall results of this complex and expensive procedure. Our objective was to characterize the most important clinical, social and economic features of candidates for transplantation and their potential donors as well as the influence of these factors on overall survival in a retrospective and exploratory analysis at a university hospital. From July 1993 to July 2001, candidates for BMT were referred to the Bone Marrow Transplantation Unit by Hematology and Oncology Centers from several regions of Brazil. A total of 1138 patients were referred to us as candidates for alloBMT. Median age was 25 years (range: 2 months-60 years), 684 (60.1%) were males and 454 (39.9%) were females. The clinical indications were severe aplastic anemia and hematological malignancies. From the total of 1138 patients, 923 had HLA-typing; 497/923 (53.8%) candidates had full match donors; 352/1138 (30.8%) were eligible for alloBMT. Only 235 of 352 (66.7%) were transplanted. Schooling was 1st to 8th grade for 123/235 (52.3%); monthly family income ranged from US$60 (7%) to more than US$400 (36%). Overall survival for patients with chronic myeloid leukemia, severe aplastic anemia and acute myeloid leukemia was 58, 60 and 30%, respectively. Thus, overall survival rates for the most frequent hematological diseases were similar to those reported in the International Registry, except for acute myeloid leukemia. This descriptive and exploratory analysis suggests the feasibility of alloBMT in a developing country like Brazil.

Direct-Driven Interior Magnet Permanent Magnet Synchronous Motors for a Full Electric Sports Car

The design process of direct-driven permanent magnet synchronous machines (PMSMs) for a full electric 4 ´ 4 sports car is presented. The rotor structure of the machine consists of two permanent magnet layers embedded inside the rotor laminations thus resulting in some inverse saliency, where the q-axis inductance is larger than the d-axis one. An integer slot stator winding was selected to fully take advantage of the additional reluctance torque. The performance characteristics of the designed PMSMs were calculated by applying a twodimensional finite element method. Cross-saturation between the d- and q-axes was taken into account in the calculation of the synchronous inductances. The calculation results are validated by measurements.

Gender and age differences in polysomnography findings and sleep complaints of patients referred to a sleep laboratory

Our objective was to examine the effet of gender on the sleep pattern of patients referred to a sleep laboratory. The data (questionnaires and polysomnographic recordings) were collected from a total of 2365 patients (1550 men and 815 women). The polysomnography permits an objective assessment of the sleep pattern. We included only polysomnography exams obtained with no more than one recording system in order to permit normalization of the data. Men had a significantly higher body mass index than women (28.5 ± 4.8 vs 27.7 ± 6.35 kg/m²) and had a significantly higher score on the Epworth Sleepiness Scale (10.8 ± 5.3 vs 9.5 ± 6.0), suggesting daytime sleepiness. Women had a significantly higher sleep latency than men, as well as a higher rapid eye movement (REM) latency. Men spent more time in stages 1 (4.6 ± 4.1 vs 3.9 ± 3.8) and 2 (57.0 ± 10.5 vs 55.2 ± 10.1) of non-REM sleep than women, whereas women spent significantly more time in deep sleep stages (3 and 4) than men (22.6 ± 9.0 vs 19.9 ± 9.0). The apnea/hypopnea and arousal indexes were significantly higher and more frequent in men than in women (31.0 ± 31.5 vs 17.3 ± 19.7). Also, periodic leg movement index did not differ significantly between genders, but rather differed among age groups. We did not find significant differences between genders in the percentage of REM sleep and sleep efficiency. The results of the current study suggest that there are specific gender differences in sleep pattern.

Moderate intensity physical training accelerates healing of full-thickness wounds in mice

Physical training influences the cells and mediators involved in skin wound healing. The objective of this study was to determine the changes induced by different intensities of physical training in mouse skin wound healing. Ninety male C57BL6 mice (8 weeks old, 20-25 g) were randomized into three physical training groups: moderate (70% VO2max), high (80% VO2max), and strenuous intensity (90% VO2max). Animals trained on a motorized treadmill for 8 weeks (Elesion: physical training until the day of excisional lesion, N = 10) or 10 weeks (Eeuthan: physical training for 2 additional weeks after excisional lesion until euthanasia, N = 10), five times/week, for 45 min. Control groups (CG) trained on the treadmill three times/week only for 5 min (N = 10). In the 8th week, mice were anesthetized, submitted to a dorsal full-thickness excisional wound of 1 cm², and sacrificed 14 days after wounding. Wound areas were measured 4, 7, and 14 days after wounding to evaluate contraction (d4, d7 and d14) and re-epithelialization (d14). Fragments of lesion and adjacent skin were processed and submitted to routine histological staining. Immunohistochemistry against alpha-smooth muscle actin (α-SMA) was performed. Moderate-intensity training (M) until lesion (M/Elesion) led to better wound closure 7 days after wounding compared to controls and M/Eeuthan (P < 0.05), and both moderate-intensity groups showed better re-epithelialization rates than controls (M/Elesion = 85.9%, M/Eeuthan = 96.4% and M/CG = 79.9%; P < 0.05). Sections of M/Elesion and M/Eeuthan groups stained with hematoxylin-eosin, Picrosirius red and α-SMA showed the most mature granulation tissues among all trained groups and controls. Thus, moderate-intensity physical training improves skin wound healing.

Monolithic zirconium dioxide as a full contour restorative material: With special emphasis on the optical and mechanical properties

Full contour monolithic zirconia restorations have shown an increased popularity in the dental field over the recent years, owing to its mechanical and acceptable optical properties. However, many features of the restoration are yet to be researched and supported by clinical studies to confirm its place among the other indirect restorative materials This series of in vitro studies aimed at evaluating and comparing the optical and mechanical properties, light cure irradiance, and cement polymerization of multiple monolithic zirconia material at variable thicknesses, environments, treatments, and stabilization. Five different monolithic zirconia materials, four of which were partially stabilized and one fully stabilized were investigated. The optical properties in terms of surface gloss, translucency parameter, and contrast ratio were determined via a reflection spectrophotometer at variable thicknesses, coloring, sintering method, and after immersion in an acidic environment. Light cure irradiance and radiant exposure were quantified through the specimens at variable thicknesses and the degree of conversion of two dual-cure cements was determined via Fourier Transform Infrared spectroscopy. Bi-axial flexural strength was evaluated to compare between the partially and fully stabilized zirconia prepared using different coloring and sintering methods. Surface characterization was performed using a scanning electron microscope and a spinning disk confocal microscope. The surface gloss and translucency of the zirconia investigated were brand and thickness dependent with the translucency values decreasing as the thickness increased. Staining decreased the translucency of the zirconia and enhanced surface gloss as well as the flexural strength of the fully stabilized zirconia but had no effect on partially stabilized zirconia. Immersion in a corrosive acid increased surface gloss and decreased the translucency of some zirconia brands. Zirconia thickness was inversely related to the amount of light irradiance, radiant exposure, and degree of monomer conversion. Type of sintering furnace had no effect on the optical and mechanical properties of zirconia. Monolithic zirconia maybe classified as a semi-translucent material that is well influenced by the thickness, limiting its use in the esthetic zones. Conventional acid-base reaction, autopolymerizing and dual-cure cements are recommended for its cementation. Its desirable mechanical properties give it a high potential as a restoration for posterior teeth. However, close monitoring with controlled clinical studies must be determined before any definite clinical recommendations can be drawn.

Informações nutricionais e de saúde disponibilizadas aos consumidores por restaurantes comerciais, tipo fast food e full service

O objetivo principal deste estudo foi identificar e caracterizar o oferecimento de informação nutricional e de saúde em restaurantes comerciais do município de Campinas-SP. Com a utilização de questionários previamente testados, foram entrevistados, entre outubro e dezembro de 2005, 20 gerentes de restaurantes do tipo fast food e 94 do tipo full service, localizados nas cinco regiões de Campinas. Após a coleta das informações, foi construído um banco de dados utilizando o software Excel. Para o tratamento estatístico, utilizou-se o teste do qui-quadrado e o teste T de Student. O software estatístico utilizado nas análises foi o MINITAB versão 14.2. Entre os principais resultados, destaca-se que 25,4% dos restaurantes fazem uso de informação nutricional e/ou de saúde. O tipo de informação nutricional mais empregado é a "declaração de nutrientes", com relevância para a informação do valor energético e de macronutrientes de alguns pratos. A fonte mais citada para a disposição da informação nutricional foi o cardápio, com 48,3% das citações. A freqüência de oferecimento dessas informações é significativamente maior entre as redes de fast food do que entre os restaurantes full service. Aponta-se a necessidade de se estudar formas de regulamentação dessas informações pelo poder público.

Finding Methods for Recognizing and Classifying Spare Part Criticality – Case Full Deposit Stripping Machines

The aim of this Master’s thesis is to find a method for classifying spare part criticality in the case company. Several approaches exist for criticality classification of spare parts. The practical problem in this thesis is the lack of a generic analysis method for classifying spare parts of proprietary equipment of the case company. In order to find a classification method, a literature review of various analysis methods is required. The requirements of the case company also have to be recognized. This is achieved by consulting professionals in the company. The literature review states that the analytic hierarchy process (AHP) combined with decision tree models is a common method for classifying spare parts in academic literature. Most of the literature discusses spare part criticality in stock holding perspective. This is relevant perspective also for a customer orientated original equipment manufacturer (OEM), as the case company. A decision tree model is developed for classifying spare parts. The decision tree classifies spare parts into five criticality classes according to five criteria. The criteria are: safety risk, availability risk, functional criticality, predictability of failure and probability of failure. The criticality classes describe the level of criticality from non-critical to highly critical. The method is verified for classifying spare parts of a full deposit stripping machine. The classification can be utilized as a generic model for recognizing critical spare parts of other similar equipment, according to which spare part recommendations can be created. Purchase price of an item and equipment criticality were found to have no effect on spare part criticality in this context. Decision tree is recognized as the most suitable method for classifying spare part criticality in the company.

Controlling full penetration in MAG welding by the application of infrared thermography and neural network

In this study, an infrared thermography based sensor was studied with regard to usability and the accuracy of sensor data as a weld penetration signal in gas metal arc welding. The object of the study was to evaluate a specific sensor type which measures thermography from solidified weld surface. The purpose of the study was to provide expert data for developing a sensor system in adaptive metal active gas (MAG) welding. Welding experiments with considered process variables and recorded thermal profiles were saved to a database for further analysis. To perform the analysis within a reasonable amount of experiments, the process parameter variables were gradually altered by at least 10 %. Later, the effects of process variables on weld penetration and thermography itself were considered. SFS-EN ISO 5817 standard (2014) was applied for classifying the quality of the experiments. As a final step, a neural network was taught based on the experiments. The experiments show that the studied thermography sensor and the neural network can be used for controlling full penetration though they have minor limitations, which are presented in results and discussion. The results are consistent with previous studies and experiments found in the literature.

Female administrators and the mentors who give them full support /

A looming attrition rate, a steady increase in the number of women in administration, and a lack of Canadian research all provided the rationale for this study. The problem in this study was to investigate the needs and challenges of new female administrators and to examine the role that mentors play in addressing these issues. This study also explored the perceived benefits of having a mentor. This study examined the inductive year of 33 female administrators from 3 Ontario school boards. It was a qualitative and quantitative design, using questionnaire and interview data. It was found that the majority felt that they struggled with biases and expectations that were gender specific. The challenges that were perceived to be most prevalent were categorized into 4 thematic areas: Maintaining Balance, Feeling Pressured, The Perceptions of Others, and Being Challenged by Others. Regarding the benefits of mentoring, the participants perceived mentoring to be most beneficial in terms of professional growth, followed by learning how to run a school, and then career advancement. The significance of this study was threefold: it had theoretical implications as well as implications for practice and future research. Suggestions included: facilitating longitudinal relationships, having the board become more actively involved in facilitating the relationship, and implementing an internship program. This study attempted to extend the current literature by theorizing that a mentorship is cyclical in nature. Future research could include program design and implementation, as well as providing consistent and accessible mentoring opportunities for all.

The impact of hospital downsizing on registered nurses displaced from full-time employment

This research identified and explored the various responses often women Registered Nurses displaced from full-time elnployment as staff nurses in general hospitals in southern Ontario. These nurses were among the hundreds in Ontario who were displaced between October 1991 and October 1995 as a result of organizational downsizing and other health care reform initiatives. The purpose ofthis research was to document tIle responses of nurses to job displacement, and how that experience impacted on a nurse's professional identity and her understanding of the nature and utilization of nursing labour. This study incorporated techniques consistent with the principles of naturalistic inquiry and the narrative tradition. A purposive sample was drawn from the Health Sector Training and Adjustment Program database. Data collection and analysis was a three-step process wherein the data collection in each step was informed by the data analysis in the preceding step. The main technique used for qualitative data collection was semistructured, individual and group interviews. Emerging from the data was a rich and textured story ofhow job displacement disrupted the meaningful connections nurses had with their work. In making meaning of this change, displaced nurses journeyed along a three-step path toward labour adjustment. Structural analysis was the interpretive lens used to view the historical, sociopolitical and ideological forces which constrained the choices reasonably available to displaced nurses while Kelly's personal construct theory was the lens used to view the process of making choices and reconstruing their professional identity.

Subjective, behavioural and electrophysiological measurements of the time-course and intensity of sleep inertia after a full night of sleep /

Several recent studies have described the period of impaired alertness and performance known as sleep inertia that occurs upon awakening from a full night of sleep. They report that sleep inertia dissipates in a saturating exponential manner, the exact time course being task dependent, but generally persisting for one to two hours. A number of factors, including sleep architecture, sleep depth and circadian variables are also thought to affect the duration and intensity. The present study sought to replicate their findings for subjective alertness and reaction time and also to examine electrophysiological changes through the use of event-related potentials (ERPs). Secondly, several sleep parameters were examined for potential effects on the initial intensity of sleep inertia. Ten participants spent two consecutive nights and subsequent mornings in the sleep lab. Sleep architecture was recorded for a fiiU nocturnal episode of sleep based on participants' habitual sleep patterns. Subjective alertness and performance was measured for a 90-minute period after awakening. Alertness was measured every five minutes using the Stanford Sleepiness Scale (SSS) and a visual analogue scale (VAS) of sleepiness. An auditory tone also served as the target stimulus for an oddball task designed to examine the NlOO and P300 components ofthe ERP waveform. The five-minute oddball task was presented at 15-minute intervals over the initial 90-minutes after awakening to obtain six measures of average RT and amplitude and latency for NlOO and P300. Standard polysomnographic recording were used to obtain digital EEG and describe the night of sleep. Power spectral analyses (FFT) were used to calculate slow wave activity (SWA) as a measure of sleep depth for the whole night, 90-minutes before awakening and five minutes before awakening.