Análisis de dos economías de la Unión Europea: Alemania y España

CASTELLANO. Alemania, un país muy afectado tras el nazismo y las diferentes guerras en las cuales se vio involucrado, adoptó una Economía Social de Mercado (ESM) en 1948, que le permitió abrir sus puertas hacia la internacionalización, lo cual había estado fuertemente regulado hasta entonces. Esta apertura de fronteras ha favorecido al comercio exterior el cual está muy desarrollado. Además, una moderada inflación, un bajo nivel de deuda pública, alta cualificación de la población, el potente desarrollo industrial manufacturero y su capacidad de recuperación de la crisis económica que estalló en 2007, entre otros, hace de Alemania un país muy próspero. España, tras su recuperación de la época del franquismo la cual había castigado de forma severa a este país, se recuperó hasta niveles superiores a Alemania en cuestión de confianza empresarial. En cambio, en 2007, momento de estallido de crisis, la producción de varios sectores se vio muy reducida (principalmente el sector de la construcción), la tasa de desempleo aumentó de forma descontrolada… Actualmente, este país se encuentra en proceso de recuperación el cual se basa mucho en el turismo y por consiguiente en el sector servicios que año tras año ha ido evolucionando hasta convertirse en uno de los motores de esta economía.

Thermodynamic damage mechanism of transparent films caused by a low-power laser

A new model for analyzing the laser-induced damage process is provided. In many damage pits, the melted residue can been found. This is evidence of the phase change of materials. Therefore the phase change of materials is incorporated into the mechanical damage mechanism of films. Three sequential stages are discussed: no phase change, liquid phase change, and gas phase change. To study the damage mechanism and process, two kinds of stress have been considered: thermal stress and deformation stress. The former is caused by the temperature gradient and the latter is caused by high-pressure drive deformation. The theory described can determine the size of the damage pit. (c) 2006 Optical Society of America.

Gestão de resíduos químicos em laboratório universitário. Estudo de caso: Laboratório de Engenharia Sanitária, Faculdade de Engenharia UERJ.

Ao longo da história do homem, as universidades têm exercido um papel fundamental na geração de conhecimentos e tecnologias com o fim maior de melhorar a qualidade de vida de nossa sociedade. Em contrapartida, além de produzir os benefícios oriundos da aplicação dos conhecimentos e tecnologias, as pesquisas científicas produzem também diversos tipos de resíduos potencialmente poluidores e tóxicos os quais não estão sendo descartados e tratados corretamente. A falta de políticas institucionais de gerenciamento de resíduos nas universidades além de proporcionar a poluição dos corpos receptores de seus efluentes, a deterioração das tubulações coletoras de esgoto e, danos a eficiência das estações de tratamento de esgoto, também contribui para a geração de um passivo ambiental nas universidades, os quais são acumulados anualmente à espera de tratamento adequado em precárias condições de armazenamento. Dentro deste cenário, o presente estudo visa caracterizar e avaliar o gerenciamento dos resíduos químicos do Laboratório de Engenharia Sanitária (LES) da Universidade do Estado do Rio de Janeiro (UERJ). Quanto aos meios, foram realizadas pesquisas bibliográficas, eletrônicas e documentais, assim como entrevistas com os principais atores do gerenciamento dos resíduos no laboratório foco deste estudo. O estudo revela que o gerenciamento dos resíduos gerados em tal laboratório é realizado de maneira incipiente. As metodologias utilizadas em todas as etapas do gerenciamento, desde a geração dos resíduos até a destinação final dos mesmos carecem de melhorias para também a melhora da qualidade ambiental das atividades de pesquisa e de ensino do laboratório. Além da inexistência de normas internas para a padronização e controle do processo de gerenciamento, o laboratório também carece de estrutura física e financeira para a adequação do processo. A partir do diagnóstico deste cenário, foi possível o reconhecimento de riscos relacionados às características dos reagentes químicos somados as condicionantes ambientais do laboratório, mais especificamente, às condicionantes presentes no local do armazenamento dos resíduos. Tais riscos possuem a natureza de riscos químicos, físicos, toxicidade e riscos de explosão. Ainda na caracterização deste cenário, foi possível o reconhecimento do não cumprimento de legislações pertinentes ao tema. Conclui-se que, de maneira geral, as universidades carecem de investimentos na temática de gestão ambiental nas políticas institucionais e dia-a-dia das universidades. O laboratório em questão também não foge a esta realidade e, por tal razão, também carece de investimentos financeiros, investimentos em treinamento e investimentos na estruturas físicas para todos estes darem suporte a implantação de um gerenciamento de resíduos eficiente e consistente.

Prioritizing county-level well-being: Moving toward assessment of Gulf Coast counties impacted by the Deepwater Horizon Industrial Disaster

To develop a portfolio of indicators and measures that could best measure changes in the social, economic, environmental and health dimensions of well-being in coastal counties we convened a group of experts March 8-9, 2011 in Charleston, SC, U.S.A. The region of interest was of the northern Gulf of Mexico, specifically, those coastal counties most impacted during the explosion and subsequent oil spill from the Macondo Prospect wellhead during the summer of 2010. Over the course of the two-day workshop participants moved through presentations and facilitated sessions to identify and prioritize potential indicators and measures deemed most valuable for capturing changes in well-being related to changes in or disruption of ecosystem services. The experts reached consensus on a list of indicators that are now being operationalized by NOAA researchers. The ultimate goal of this research project is to determine whether a meaningful set of social and economic indicators can be developed to document changes in well-being that occur as a result of changes in ecosystem services. The outcomes and outputs from the workshop that is the subject of this report helped us to identify high-quality indicators useful for measuring well-being.

Social and economic implications of the fishery distribution patterns on Lake Victoria, Uganda

The fisheries of Lake Victoria have undergonea dramatic transformation during the last two decades. From being a locally based fishery with little intervention and capital investment from outside,the present fishery is dominated by national and international capital penetrating the industry. It is explosion in the growth of nile perch and the strong demand devloped for this fishin the global markets, which have transformed the fisheries of the Lake victoria. This report presents the results of a survey carried out between October 2001 and February 2002 about the fishery distribution patterns and their impacts on fisher communities of Lake Victoria. The fisheries distribution pattern of the lake is described as well as the flows and benefits from the fisheries resource and the resource constraints and sustainability options. A major part of the paper discusses some of the socio-economic impacts of the rapid changes that are responsible for the present fisheries. It particularly focuses on the effect of the Nile perch boom, its globalization and the development of the fish industry in Uganda, on food security and employment for the local population.

The changing face and role of CACSD

Computer Aided Control Engineering involves three parallel streams: Simulation and modelling, Control system design (off-line), and Controller implementation. In industry the bottleneck problem has always been modelling, and this remains the case - that is where control (and other) engineers put most of their technical effort. Although great advances in software tools have been made, the cost of modelling remains very high - too high for some sectors. Object-oriented modelling, enabling truly re-usable models, seems to be the key enabling technology here. Software tools to support control systems design have two aspects to them: aiding and managing the work-flow in particular projects (whether of a single engineer or of a team), and provision of numerical algorithms to support control-theoretic and systems-theoretic analysis and design. The numerical problems associated with linear systems have been largely overcome, so that most problems can be tackled routinely without difficulty - though problems remain with (some) systems of extremely large dimensions. Recent emphasis on control of hybrid and/or constrained systems is leading to the emerging importance of geometric algorithms (ellipsoidal approximation, polytope projection, etc). Constantly increasing computational power is leading to renewed interest in design by optimisation, an example of which is MPC. The explosion of embedded control systems has highlighted the importance of autocode generation, directly from modelling/simulation products to target processors. This is the 'new kid on the block', and again much of the focus of commercial tools is on this part of the control engineer's job. Here the control engineer can no longer ignore computer science (at least, for the time being). © 2006 IEEE.

The changing face and role of CACSD

Computer Aided Control Engineering involves three parallel streams: Simulation and modelling, Control system design (off-line), and Controller implementation. In industry the bottleneck problem has always been modelling, and this remains the case - that is where control (and other) engineers put most of their technical effort. Although great advances in software tools have been made, the cost of modelling remains very high - too high for some sectors. Object-oriented modelling, enabling truly re-usable models, seems to be the key enabling technology here. Software tools to support control systems design have two aspects to them: aiding and managing the work-flow in particular projects (whether of a single engineer or of a team), and provision of numerical algorithms to support control-theoretic and systems-theoretic analysis and design. The numerical problems associated with linear systems have been largely overcome, so that most problems can be tackled routinely without difficulty - though problems remain with (some) systems of extremely large dimensions. Recent emphasis on control of hybrid and/or constrained systems is leading to the emerging importance of geometric algorithms (ellipsoidal approximation, polytope projection, etc). Constantly increasing computational power is leading to renewed interest in design by optimisation, an example of which is MPC. The explosion of embedded control systems has highlighted the importance of autocode generation, directly from modelling/simulation products to target processors. This is the 'new kid on the block', and again much of the focus of commercial tools is on this part of the control engineer's job. Here the control engineer can no longer ignore computer science (at least, for the time being). ©2006 IEEE.

A critical review of Glucose biosensors based on Carbon nanomaterials: Carbon nanotubes and graphene

There has been an explosion of research into the physical and chemical properties of carbon-based nanomaterials, since the discovery of carbon nanotubes (CNTs) by Iijima in 1991. Carbon nanomaterials offer unique advantages in several areas, like high surface-volume ratio, high electrical conductivity, chemical stability and strong mechanical strength, and are thus frequently being incorporated into sensing elements. Carbon nanomaterial-based sensors generally have higher sensitivities and a lower detection limit than conventional ones. In this review, a brief history of glucose biosensors is firstly presented. The carbon nanotube and grapheme-based biosensors, are introduced in Sections 3 and 4, respectively, which cover synthesis methods, up-to-date sensing approaches and nonenzymatic hybrid sensors. Finally, we briefly outline the current status and future direction for carbon nanomaterials to be used in the sensing area. © 2012 by the authors; licensee MDPI, Basel, Switzerland.

An ngram-based statistical machine translation decoder

In this paper we describe MARIE, an Ngram-based statistical machine translation decoder. It is implemented using a beam search strategy, with distortion (or reordering) capabilities. The underlying translation model is based on an Ngram approach, extended to introduce reordering at the phrase level. The search graph structure is designed to perform very accurate comparisons, what allows for a high level of pruning, improving the decoder efficiency. We report several techniques for efficiently prune out the search space. The combinatory explosion of the search space derived from the search graph structure is reduced by limiting the number of reorderings a given translation is allowed to perform, and also the maximum distance a word (or a phrase) is allowed to be reordered. We finally report translation accuracy results on three different translation tasks.

The dynamic response of edge clamped plates loaded by spherically expanding sand shells

The dynamic deformation of both edge clamped stainless steel sandwich panels with a pyramidal truss core and equal mass monolithic plates loaded by spherically expanding shells of dry and water saturated sand has been investigated, both experimentally and via a particle based simulation methodology. The spherically expanding sand shell is generated by detonating a sphere of explosive surrounded by a shell of either dry or water saturated synthetic sand. The measurements show that the sandwich panel and plate deflections decrease with increasing stand-off between the center of the charge and the front of the test structures. Moreover, for the same charge and sand mass, the deflections of the plates are significantly higher in the water saturated sand case compared to that of dry sand. For a given stand-off, the mid-span deflection of the sandwich panel rear faces was substantially less than that of the corresponding monolithic plate for both the dry and water saturated sand cases. The experiments were simulated via a coupled discrete-particle/ finite element scheme wherein the high velocity impacting sand is modeled by interacting particles while the plate is modeled within a Lagrangian finite element setting. The simulations are in good agreement with the measurements for the dry sand impact of both the monolithic and sandwich structures. However, the simulations underestimate the effect of stand-off in the case of the water saturated sand explosion, i.e. the deflections decrease more sharply with increasing stand-off in the experiments compared to the simulations. The simulations reveal that the momentum transmitted into the sandwich and monolithic plate structures by the sand shell is approximately the same, consistent with a small fluid-structure interaction effect. The smaller deflection of the sandwich panels is therefore primarily due to the higher bending strength of sandwich structures. © 2013 The Authors. Published by Elsevier Ltd. All rights reserved.

Advanced carbon nanotubes and carbon nanotube fibers for biosensing applications

Since the discovery of Carbon Nanotubes (CNTs) by Iijima in 1991[1, 2], there has been an explosion of research into the physical and chemical properties of this novel material. CNT based biosensors can play an important role in amperometric, immunosensor and nucleic-acid sensing devices, e.g. for detection of life threatening biological agents in time of war or in terrorist attacks, saving life and money for the NHS. CNTs offer unique advantages in several areas, like high surfacevolume ratio, high electrical conductivity, chemical stability and strong mechanical strength, and CNT based sensors generally have higher sensitivities and lower detection limit than conventional ones. In this review, recent advances in biosensors utilising carbon nanotubes and carbon nanotube fibres will be discussed. The synthesis methods, nanostructure approaches and current developments in biosensors using CNTs will be introduced in the first part. In the second part, the synthesis methods and up-to-date progress in CNT fibre biosensors will be reviewed. Finally, we briefly outline some exciting applications for CNT and CNT fibres which are being targeted. By harnessing the continual advancements in micro and nano- technology, the functionality and capability of CNT-based biosensors will be enhanced, thus expanding and enriching the possible applications that can be delivered by these devices. © 2012 Bentham Science Publishers. All rights reserved.

参数化系统安全性的启发式符号验证

参数化系统(paramterized system)是指包含特定有限状态进程多个实例的并发系统,其中的参数是指系统内进程实例的数目,即系统的规模.反向可达性分析(backward reachability analysis)已被广泛用于验证参数化系统是否满足以向上封闭(upward-closed)集合表示的安全性(safety property).与有限状态系统验证相类似,参数化系统的验证同样也面临着状态爆炸(state explosion)问题,并且模型检测算法的有效性依赖于如何采用有效的数据结构表示状态集合.针对表示无穷状态的向上封闭集合,研究人员提出了多种基于约束(constraint-based)的符号表示方法.但这些方法依然面临着符号状态爆炸(symbolic state explosion)问题或者其包含判定问题,即判断一个约束条件集合符号化表示的实际状态集合是否为另一约束条件集合所对应的状态集合的子集,是Co-NP完全问题.因此,虽然有限状态验证技术能够验证一些具有一定规模的问题,但现有针对参数化系统的验证方法所能解决的问题的规模较为有限,需要近一步提高模型检测算法的效率.针对参数化系统提出了加快反向可达性分析的多个启发式规则,实验结果表明,这些启发式规则可以使算法的效率提高几个数量级,从而有助于解决现有参数化系统验证方法所存在的问题.

Effect of pulse heating parameters on the microscale bubble dynamics at a microheater surface

We study the effects of pulse heating parameters on the micro bubble behavior of a platinum microheater (100 mu m x 20 mu m) immersed in a methanol pool. The experiment covers the heat fluxes of 10-37 MW/m(2) and pulse frequencies of 25-500 Hz. The boiling incipience is initiated at the superheat limit of methanol, corresponding to the homogeneous nucleation. Three types of micro boiling patterns are identified. The first type is named as the bubble explosion and regrowth, consisting of a violent explosive boiling and shrinking, followed by a slower bubble regrowth and subsequent shrinking, occurring at lower heat fluxes. The second type, named as the bubble breakup and attraction, consists of the violent explosive boiling, bubble breakup and emission, bubble attraction and coalescence process, occurring at higher heat fluxes than those of the first type. The third type, named as the bubble size oscillation and large bubble formation, involves the initial explosive boiling, followed by a short periodic bubble growth and shrinking. Then the bubble continues to increase its size, until a constant bubble size is reached which is larger than the microheater length. 

Substitution Matrices of Residue Triplets Derived from Protein Blocks.

In protein sequence alignment, residue similarity is usually evaluated by substitution matrix, which scores all possible exchanges of one amino acid with another. Several matrices are widely used in sequence alignment, including PAM matrices derived from homologous sequence and BLOSUM matrices derived from aligned segments of BLOCKS. However, most matrices have not addressed the high-order residue-residue interactions that are vital to the bioproperties of protein.With consideration for the inherent correlation in residue triplet, we present a new scoring scheme for sequence alignment. Protein sequence is treated as overlapping and successive 3-residue segments. Two edge residues of a triplet are clustered into hydrophobic or polar categories, respectively. Protein sequence is then rewritten into triplet sequence with 2 · 20 · 2 = 80 alphabets. Using a traditional approach, we construct a new scoring scheme named TLESUMhp (TripLEt SUbstitution Matrices with hydropobic and polar information) for pairwise substitution of triplets, which characterizes the similarity of residue triplets. The applications of this matrix led to marked improvements in multiple sequence alignment and in searching structurally alike residue segments. The reason for the occurrence of the ‘‘twilight zone,’’ i.e., structure explosion of lowidentity sequences, is also discussed.