Computational modelling of non-equilibrium condensing steam flows in low-pressure steam turbines

The steam turbines play a significant role in global power generation. Especially, research on low pressure (LP) steam turbine stages is of special importance for steam turbine man- ufactures, vendors, power plant owners and the scientific community due to their lower efficiency than the high pressure steam turbine stages. Because of condensation, the last stages of LP turbine experience irreversible thermodynamic losses, aerodynamic losses and erosion in turbine blades. Additionally, an LP steam turbine requires maintenance due to moisture generation, and therefore, it is also affecting on the turbine reliability. Therefore, the design of energy efficient LP steam turbines requires a comprehensive analysis of condensation phenomena and corresponding losses occurring in the steam tur- bine either by experiments or with numerical simulations. The aim of the present work is to apply computational fluid dynamics (CFD) to enhance the existing knowledge and understanding of condensing steam flows and loss mechanisms that occur due to the irre- versible heat and mass transfer during the condensation process in an LP steam turbine. Throughout this work, two commercial CFD codes were used to model non-equilibrium condensing steam flows. The Eulerian-Eulerian approach was utilised in which the mix- ture of vapour and liquid phases was solved by Reynolds-averaged Navier-Stokes equa- tions. The nucleation process was modelled with the classical nucleation theory, and two different droplet growth models were used to predict the droplet growth rate. The flow turbulence was solved by employing the standard k-ε and the shear stress transport k-ω turbulence models. Further, both models were modified and implemented in the CFD codes. The thermodynamic properties of vapour and liquid phases were evaluated with real gas models. In this thesis, various topics, namely the influence of real gas properties, turbulence mod- elling, unsteadiness and the blade trailing edge shape on wet-steam flows, are studied with different convergent-divergent nozzles, turbine stator cascade and 3D turbine stator-rotor stage. The simulated results of this study were evaluated and discussed together with the available experimental data in the literature. The grid independence study revealed that an adequate grid size is required to capture correct trends of condensation phenomena in LP turbine flows. The study shows that accurate real gas properties are important for the precise modelling of non-equilibrium condensing steam flows. The turbulence modelling revealed that the flow expansion and subsequently the rate of formation of liquid droplet nuclei and its growth process were affected by the turbulence modelling. The losses were rather sensitive to turbulence modelling as well. Based on the presented results, it could be observed that the correct computational prediction of wet-steam flows in the LP turbine requires the turbulence to be modelled accurately. The trailing edge shape of the LP turbine blades influenced the liquid droplet formulation, distribution and sizes, and loss generation. The study shows that the semicircular trailing edge shape predicted the smallest droplet sizes. The square trailing edge shape estimated greater losses. The analysis of steady and unsteady calculations of wet-steam flow exhibited that in unsteady simulations, the interaction of wakes in the rotor blade row affected the flow field. The flow unsteadiness influenced the nucleation and droplet growth processes due to the fluctuation in the Wilson point.

Quantification of the effects of architectural traits on dry mass production and light interception of tomato canopy under different temperature regimes using a dynamic functional-structural plant model

There is increasing interest in evaluating the environmental effects on crop architectural traits and yield improvement. However, crop models describing the dynamic changes in canopy structure with environmental conditions and the complex interactions between canopy structure, light interception, and dry mass production are only gradually emerging. Using tomato (Solanum lycopersicum L.) as a model crop, a dynamic functional-structural plant model (FSPM) was constructed, parameterized, and evaluated to analyse the effects of temperature on architectural traits, which strongly influence canopy light interception and shoot dry mass. The FSPM predicted the organ growth, organ size, and shoot dry mass over time with high accuracy (>85%). Analyses of this FSPM showed that, in comparison with the reference canopy, shoot dry mass may be affected by leaf angle by as much as 20%, leaf curvature by up to 7%, the leaf length: width ratio by up to 5%, internode length by up to 9%, and curvature ratios and leaf arrangement by up to 6%. Tomato canopies at low temperature had higher canopy density and were more clumped due to higher leaf area and shorter internodes. Interestingly, dry mass production and light interception of the clumped canopy were more sensitive to changes in architectural traits. The complex interactions between architectural traits, canopy light interception, dry mass production, and environmental conditions can be studied by the dynamic FSPM, which may serve as a tool for designing a canopy structure which is 'ideal' in a given environment.

Phase transitions in gene networks evolved under different selection rules

Mathematical models of gene regulation are a powerful tool for understanding the complex features of genetic control. While various modeling efforts have been successful at explaining gene expression dynamics, much less is known about how evolution shapes the structure of these networks. An important feature of gene regulatory networks is their stability in response to environmental perturbations. Regulatory systems are thought to have evolved to exist near the transition between stability and instability, in order to have the required stability to environmental fluctuations while also being able to achieve a wide variety of functions (corresponding to different dynamical patterns). We study a simplified model of gene network evolution in which links are added via different selection rules. These growth models are inspired by recent work on `explosive' percolation which shows that when network links are added through competitive rather than random processes, the connectivity phase transition can be significantly delayed, and when it is reached, it appears to be first order (discontinuous, e.g., going from no failure at all to large expected failure) instead of second order (continuous, e.g., going from no failure at all to very small expected failure). We find that by modifying the traditional framework for networks grown via competitive link addition to capture how gene networks evolve to avoid damage propagation, we also see significant delays in the transition that depend on the selection rules, but the transitions always appear continuous rather than `explosive'.

Experimental and analytical study of cracks under biaxial fatigue

Most mechanical components experience multi-axial cyclic loading conditions during service. Experimental analysis of fatigue cracks under such conditions is not easy and most works tend to focus more on the simpler but less realistic case of uni-axial loading. Consequently, there are many uncertainties related to the load sequence effect that are now well known and are not normally incorporated into the growth models. The current work presents a new methodology for evaluating overload effect in biaxial fatigue cracks. The methodology includes evaluation of mixed-mode (KI and KII) stress intensity factor and the Crack Opening Displacement for samples with and without overload cycle under biaxial loading. The methodology is tested under a range of crack lengths. All crack-tip information is obtained with a hybrid methodology that combines experimental full-field digital image correlation data and Williams' elastic model describing the crack-tip field.

Life history of a wide-ranging deepwater lantern shark in the north-east Atlantic, Etmopterus spinax (Chondrichthyes: Etmopteridae), with implications for conservation

In this paper, the population biology of the velvet belly lanternshark Etmopterus spinax was studied and life-history coefficients determined. Age was estimated from sections of the second dorsal spine and validated by marginal increment analysis. Males attained a maximum age of 8 years while 11 year-old females were found. Several growth models were fitted and compared for both size-at-age and mass-at-age data, showing that even though this is a small-sized species, it has a relatively slow growth rate. This species matures late, specifically at 49.6 and 42.5% of the maximum observed ages for males and females, respectively. It has a low fecundity, with a mean ovarian fecundity of 9.94 oocytes and a mean uterine fecundity of 7.59 embryos per reproductive cycle. This species seems to have a long reproductive cycle, and even though no conclusive data were obtained, a 2-3 year cycle is possible. The estimated coefficients indicate that this species has a vulnerable life cycle, typical of deepwater squalid sharks. Given the high fishing pressures that it is suffering in the north-east Atlantic, this fish may already be facing severe declines or in risk of facing them in the near future. (C) 2008 The Authors Journal compilation (C) 2008 The Fisheries Society of the British Isles

Population parameters of the smooth lantern shark, Etmopterus pusillus, in southern Portugal (NE Atlantic)

Etmopterus pusillus is a deep water lantern shark with a widespread global distribution that is caught in large quantities in some areas, but is usually discarded due to the low commercial value. In this work, the population biology was studied and life history parameters determined for the first time in this species. Age was estimated from sections of the second dorsal spine and validated by marginal increment analysis. Males attained a maximum age of 13 years, while 17-year-old females were found. Several growth models were fitted and compared for both size and weight at age data, showing that even though this is a small sized species, it has a relatively slow growth rate. This species matures late and at a relatively large size: at 86.81% and 79.40% of the maximum observed sizes and at 58.02% and 54.40% of the maximum observed ages for males and females, respectively. It has a low fecundity, with a mean ovarian fecundity of 10.44 oocytes per reproductive cycle. The estimated parameters indicate that this species has a vulnerable life cycle, typical of deep water squalid sharks. Given the high fishing pressures that it is suffering in the NE Atlantic, the smooth lantern shark may be in danger of severe declines in the near future. (c) 2007 Elsevier B.V. All rights reserved.

Does international trade produce convergence?

In spite of increasing globalization around the world, the effects of international trade on economic growth are not very clear. I consider an endogenous economic growth model in an open economy with the Home Market Effect (HME) and non-homothetic preferences in order to identify some determinants of the different results in this relationship. The model shows how trade between similar countries leads to convergence in economic growth when knowledge spillovers are present, while trade between very asymmetric countries produces divergence and may become trade in a poverty or growth trap. The results for welfare move in the same direction as economic growth since convergence implies increases in welfare for both countries, while divergence leads to increases in welfare for the largest country and the opposite for its commercial partner in the absence of knowledge spillovers. International trade does not implicate greater welfare as is usual in a static context under CES preferences.

Modelos estocásticos de crescimento individual e desenvolvimento de software de estimação e previsão

Os modelos de crescimento individual são geralmente adaptações de modelos de crescimento de populações. Inicialmente estes modelos eram apenas determinísticos, isto é, não incorporavam as flutuações aleatórias do ambiente. Com o desenvolvimento da teoria do cálculo estocástico podemos adicionar um termo estocástico, que representa a aleatoriedade ambiental que influencia o processo em estudo. Actualmente, o estudo do crescimento individual em ambiente aleatório é cada vez mais importante, não apenas pela vertente financeira, mas também devido às suas aplicações nas áreas da saúde e da pecuária, entre outras. Problemas como o ajustamento de modelos de crescimento individual, estimação de parâmetros e previsão de tamanhos futuros são tratados neste trabalho. São apresentadas novas aplicações do modelo estocástico monomolecular generalizado e um novo software de aplicação deste e de outros modelos. ABSTRACT: Individual growth models are usually adaptations of growth population models. Initially these models were only deterministic, that is, they did not incorporate the random fluctuations of the environment. With the development of the theory of stochastic calculus, we can add a stochastic term that represents the random environmental influences in the process under study. Currently, the study of individual growth in a random environment is increasingly important, not only by the financial scope but also because of its applications in health care and livestock production, among others. Problems such as adjustment of an individual growth model, estimation of parameters and prediction of future sizes are treated in this work. New applications of the generalized stochastic monomolecular model and a new software applied to this and other models are presented.

Essays on asset pricing

The first chapter provides evidence that aggregate Research and Development (R&D) investment drives a persistent component in productivity growth and that this embodies a risk priced in financial markets. In a semi-endogenous growth model, this component is identified by the R&D in excess of equilibrium levels and can be approximated by the Error Correction Term in the cointegration between R&D and Total Factor Productivity. Empirically, the component results being well defined and it satisfies all key theoretical predictions: it exhibits appropriate persistency, it forecasts productivity growth, and it is associated with a cross-sectional risk premium. CAPM is the most foundational model in financial economics, but is known to empirically underestimate expected returns of low-risk assets and overestimate those with high risk. The second chapter studies how risks omission and funding tightness jointly contribute to explaining this anomaly, with the former affecting the definition of assets’ riskiness and the latter affecting how risk is remunerated. Theoretically, the two effects are shown to counteract each other. Empirically, the spread related to binding leverage constraints is found to be significant at 2% yearly. Nonetheless, average returns of portfolios that exploit this anomaly are found to mostly reflect omitted risks, in contrast to their employment in previous literature. The third chapter studies how ‘sustainability’ of assets affect discount rates, which is intrinsically mediated by the risk profile of the assets themselves. This has implications for the assessment of the sustainability-related spread and for hedging changes in the sustainability concern. This mechanism is tested on the ESG-score dimension for US data, with inconclusive evidence regarding the existence of an ESG-related premium in the first place. Also, the risk profile of the long-short ESG portfolio is not likely to impact the sign of its average returns with respect to the sustainability-spread, for the time being.

Using the level set method to model endogenous lava dome growth

Modeling volcanic phenomena is complicated by free-surfaces often supporting large rheological gradients. Analytical solutions and analogue models provide explanations for fundamental characteristics of lava flows. But more sophisticated models are needed, incorporating improved physics and rheology to capture realistic events. To advance our understanding of the flow dynamics of highly viscous lava in Peléean lava dome formation, axi-symmetrical Finite Element Method (FEM) models of generic endogenous dome growth have been developed. We use a novel technique, the level-set method, which tracks a moving interface, leaving the mesh unaltered. The model equations are formulated in an Eulerian framework. In this paper we test the quality of this technique in our numerical scheme by considering existing analytical and experimental models of lava dome growth which assume a constant Newtonian viscosity. We then compare our model against analytical solutions for real lava domes extruded on Soufrière, St. Vincent, W.I. in 1979 and Mount St. Helens, USA in October 1980 using an effective viscosity. The level-set method is found to be computationally light and robust enough to model the free-surface of a growing lava dome. Also, by modeling the extruded lava with a constant pressure head this naturally results in a drop in extrusion rate with increasing dome height, which can explain lava dome growth observables more appropriately than when using a fixed extrusion rate. From the modeling point of view, the level-set method will ultimately provide an opportunity to capture more of the physics while benefiting from the numerical robustness of regular grids.

Interiority of the optimal population growth rate with endogenous fertility

This paper analyzes the issue of the interiority of the optimal population growth rate in a two-period overlapping generations model with endogenous fertility. Using Cobb-Douglas utility and production functions, we show that the introduction of a cost of raising children allows for the possibility of the existence of an interior global maximum in the planner¿s problem, contrary to the exogenous fertility case

Interiority of the optimal population growth rate with endogenous fertility

This paper analyzes the issue of the interiority of the optimal population growth rate in a two-period overlapping generations model with endogenous fertility. Using Cobb-Douglas utility and production functions, we show that the introduction of a cost of raising children allows for the possibility of the existence of an interior global maximum in the planner¿s problem, contrary to the exogenous fertility case

Endogenous Financing and the Long Run Impact of Money Growth on Output and Prices

Most monetary models make use of the quantity theory of money along with a Phillips curve. This implies a strong correlation between money growth and output in the short run (with little or no correlation between money and prices) and a strong long run correlation between money growth and inflation and inflation (with little or no correlation between money growth and output). The empirical evidence between money and inflation is very robust, but the long run money/output relationship is ambiguous at best. This paper attempts to explain this by looking at the impact of money growth on firm financing.

Mathematical models of influenza A virus infection : from intracellular replication to virus growth in cell populations

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2015