Determination of stress-intensity factors for cracks in tubes under torsion

An experimental investigation by two-dimensional photoelastic technique is carried out to study the stress distribution and to determine the stress-intensity factors for arbitrarily oriented cracks in thin cylindrical shells subjected to torsion. A new method is employed to evaluate the pure and mixed-mode SIF's.

Photoelastic parametric studies of mode I stress intensity factors

Results of photoelastic investigations on single edge-notch tension specimens of varying notch angle and crack length are reported. The experimental results of Mode I stress intensity factors are compared with analytical results.

Stress-induced martensitic phase transformation in Cu-Zr nanowires

A novel stress-induced martensitic phase transformation in an initial < 100 >/{100} B2-CuZr nanowire is reported for the first time in this letter. Such behavior is observed in a nanowire with cross-sectional dimensions of 19.44 x 19.44 angstrom(2) over a temperature range of 100-400 K and at a strain rate of 1 x 10(9) s(-1) using atomistic simulations. Phase transformation from an initial B2 phase to a BCT (Body-Centered-Tetragonal) phase is observed via nucleation and propagation of {100} twinning plane under high strain rate tensile deformation. (C) 2009 Elsevier B.V. All rights reserved.

Unusual stress and grain size dependence for creep in nanocrystalline materials

Analyses of diffusion and dislocation creep in nanocrystals needs to take into account the generally utilized low temperatures, high stresses and very fine grain sizes. In nanocrystals, diffusion creep may be associated with a nonlinear stress dependence and dislocation creep may involve a grain size dependence.

Photoelastic determination of stress intensity factors in patched cracked plates

n this paper, the influence of patch parameters on stress intensity factors in edge cracked plates is studied by employing transmission photoelasticity. Edge cracked plates made of photo-elastic material are patched on one side only by E glass-epoxy and carbon-epoxy unidirectional composites. The patch is located on the crack in such a way that the crack tip is not covered. Magnified isochromatic fringes are obtained by using a projection microscope of magnification 50, converted into a polariscope. Irwin's method is used to compute stress intensity factors from photoelastic data. The reduction in stress intensity factors is presented in graphical form as a function of patch parameters, namely stiffness, location and length. An empirical equation connecting reduction in stress intensity factor and these patch parameters is presented.

Phosphorus nutrition and tolerance of cotton to water stress: II. Water relations, free and bound water and leaf expansion rate

In previous experiments, increased leaf-Phosphorus (P) content with increasing P supply enhanced the individual leaf expansion and water content of fresh cotton leaves in a severely drying soil. In this paper, we report on the bulk water content of leaves and its components, free and bound water, along with other measures of plant water status, in expanding cotton leaves of various ages in a drying soil with different P concentrations. The bound water in living tissue is more likely to play a major role in tolerance to abiotic stresses by maintaining the structural integrity and/or cell wall extensibility of the leaves, whilst an increased amount of free water might be able to enhance solute accumulation, leading to better osmotic adjustment and tolerance to water stress, and maintenance of the volumes of sub-cellular compartments for expansive leaf growth. There were strong correlations between leaf-P%, leaf water (total, free and bound water) and leaf expansion rate (LER) under water stress conditions in a severely drying soil. Increased soil-P enhanced the uptake of P from a drying soil, leading to increased supply of osmotically active inorganic solutes to the cells in growing leaves. This appears to have led to the accumulation of free water and more bound water, ultimately leading to increased leaf expansion rates as compared to plants in low P soil under similar water stress conditions. The greater amount of bound and free water in the high-P plants was not necessarily associated with changes in cell turgor, and appears to have maintained the cell-wall properties and extensibility under water stressed conditions in soils that are nutritionally P-deficient.

Phosphorus nutrition and tolerance of cotton to water stress I. Seed cotton yield and leaf morphology

Seed cotton yield and morphological changes in leaf growth were examined under drying soil with different phosphorus (P) concentrations in a tropical climate. Frequent soil drying is likely to induce a decrease in nutrients particularly P due to reduced diffusion and poor uptake, in addition to restrictions in available water, with strong interactive effects on plant growth and functioning. Increased soil P in field and in-ground soil core studies increased the seed cotton yield and related morphological growth parameters in a drying soil, with hot (daily maximum temperature >33°C) and dry conditions (relative humidity, 25% to 35%), particularly during peak boll formation and filling stage. The soil water content in the effective rooting zone (top 0.4 m) decreased to -1.5 MPa by day 5 of the soil drying cycle. However, the increased seed cotton yield for the high-P plants was closely related to increasing leaf area with increased P supply. Plant height, leaf fresh mass and leaf area per plant were positively related to the leaf P%, which increased with increasing P supply. Low P plants were lower in plant height, leaf area, and leaf tissue water in the drying soil. Individual leaf area and the water content of the fresh leaf (ratio of dry mass to fresh mass) were significantly dependent on leaf P%.

Remote sensing of nitrogen and water stress in wheat

Nitrogen (N) is the largest agricultural input in many Australian cropping systems and applying the right amount of N in the right place at the right physiological stage is a significant challenge for wheat growers. Optimizing N uptake could reduce input costs and minimize potential off-site movement. Since N uptake is dependent on soil and plant water status, ideally, N should be applied only to areas within paddocks with sufficient plant available water. To quantify N and water stress, spectral and thermal crop stress detection methods were explored using hyperspectral, multispectral and thermal remote sensing data collected at a research field site in Victoria, Australia. Wheat was grown over two seasons with two levels of water inputs (rainfall/irrigation) and either four levels (in 2004; 0, 17, 39 and 163 kg/ha) or two levels (in 2005; 0 and 39 kg/ha N) of nitrogen. The Canopy Chlorophyll Content Index (CCCI) and modified Spectral Ratio planar index (mSRpi), two indices designed to measure canopy-level N, were calculated from canopy-level hyperspectral data in 2005. They accounted for 76% and 74% of the variability of crop N status, respectively, just prior to stem elongation (Zadoks 24). The Normalised Difference Red Edge (NDRE) index and CCCI, calculated from airborne multispectral imagery, accounted for 41% and 37% of variability in crop N status, respectively. Greater scatter in the airborne data was attributable to the difference in scale of the ground and aerial measurements (i.e., small area plant samples against whole-plot means from imagery). Nevertheless, the analysis demonstrated that canopy-level theory can be transferred to airborne data, which could ultimately be of more use to growers. Thermal imagery showed that mean plot temperatures of rainfed treatments were 2.7 °C warmer than irrigated treatments (P < 0.001) at full cover. For partially vegetated fields, the two-Dimensional Crop Water Stress Index (2D CWSI) was calculated using the Vegetation Index-Temperature (VIT) trapezoid method to reduce the contribution of soil background to image temperature. Results showed rainfed plots were consistently more stressed than irrigated plots. Future work is needed to improve the ability of the CCCI and VIT methods to detect N and water stress and apply both indices simultaneously at the paddock scale to test whether N can be targeted based on water status. Use of these technologies has significant potential for maximising the spatial and temporal efficiency of N applications for wheat growers. ‘Ground–breaking Stuff’- Proceedings of the 13th Australian Society of Agronomy Conference, 10-14 September 2006, Perth, Western Australia.

Architectural modelling of maize under water stress

Two field experiments using maize (Pioneer 31H50) and three watering regimes [(i) irrigated for the whole crop cycle, until anthesis, (ii) not at all (experiment 1) and (iii) fully irrigated and rain grown for the whole crop cycle (experiment 2)] were conducted at Gatton, Australia, during the 2003-04 season. Data on crop ontogeny, leaf, sheath and internode lengths and leaf width, and senescence were collected at 1- to 3-day intervals. A glasshouse experiment during 2003 quantified the responses of leaf shape and leaf presentation to various levels of water stress. Data from experiment 1 were used to modify and parameterise an architectural model of maize (ADEL-Maize) to incorporate the impact of water stress on maize canopy characteristics. The modified model produced accurate fitted values for experiment 1 for final leaf area and plant height, but values during development for leaf area were lower than observed data. Crop duration was reasonably well fitted and differences between the fully irrigated and rain-grown crops were accurately predicted. Final representations of maize crop canopies were realistic. Possible explanations for low values of leaf area are provided. The model requires further development using data from the glasshouse study and before being validated using data from experiment 2 and other independent data. It will then be used to extend functionality in architectural models of maize. With further research and development, the model should be particularly useful in examining the response of maize production to water stress including improved prediction of total biomass and grain yield. This will facilitate improved simulation of plant growth and development processes allowing investigation of genotype by environment interactions under conditions of suboptimal water supply.

Stress Analysis of Deep Beams

In a beam whose depth is comparable to its span, the distribution of bending and shear stresses differs appreciably from those given by the ordinary flexural theory. In this paper, a general solution for the analysis of a rectangular, single-scan beam, under symmetrical loading is developed. The Multiple Fourier procedure is employed using four series by which it has been possible to satisfy all boundary and the resulting relation among the co-efficient are derives.

Stress Concentration in Post-Tensioned Prestressed Concrete Beams

The use of the multiple Fourier method to analyses the stress distribution in the and regions of as a post-tensioned prestressed concrete beam had shown. The multiple Fourier method demonstrated have is a relatively new method for solving those problems for which the “Saint Vansant principle” is not applicable, The actual three-dimensional problem and a two-dimensional simplified representation of it are treated. The two-dimensional case is treated first and rather completely to gain further experience with multiple Fourier procedure, the appropriate Galerkin Vector for the three-dimensional case is found and the required relations between the arbitrary functions are stated.

Work Stress and Early Atherosclerosis: Do Genetic Background and Pre-Employment Risk Factors Explain Conflicting Findings?

According to the models conceptualizing work stress, increased risk of health problems arise when high job demands co-occur with low job control (the demand-control model) or the efforts invested by the employee are disproportionately high compared to the rewards received (effort-reward imbalance model). This study examined the association between work stress and early atherosclerosis with particular attention to the role of pre-employment risk factors and genetic background in this association. The subjects were young healthy adults aged 24-39 who were participating in the 21-year follow-up of the ongoing prospective "Cardiovascular Risk in Young Finns" study in 2001-2002. Work stress was evaluated with questionnaires on demand-control model and on effort-reward model. Atherosclerosis was assessed with ultrasound of carotid artery intima-media thickness (IMT). In addition, risk for enhanced atherosclerotic process was assessed by measuring with heart rate variability and heart rate. Pre-employment risk factors, measured at age 12 to 18, included such as body mass index, blood lipids, family history of coronary heart disease, and parental socioeconomic position. Variants of the neuregulin-1 were determined using genomic DNA. The results showed that higher work stress was associated with higher IMT in men. This association was not attenuated by traditional risk factors of atherosclerosis and coronary heart disease or by pre-employment risk factors measured in adolescence. Neuregulin-1 gene moderated the association between work stress and IMT in men. A significant association between work stress and IMT was found only for the T/T genotype of the neuregulin-1 gene but not for other genotypes. Among women an association was found between higher work stress and lower heart rate variability, suggesting higher risk for developing atherosclerosis. These associations could not be explained by demographic characteristics or coronary risk factors. The present findings provide evidence for an association between work stress and atherosclerosis in relatively young population. This association seems to be modified by genetic influences but it does not appear to be confounded by pre-employment adolescent risk factors.

Childhood and adolescent antecedents of work stress and early atherosclerosis

Work stress is after musculoskeletal disorders the second most common work-related health problem in the European Union, affecting 28% of EU employees. Furthermore, a 50% excessive cardiovascular disease risk among employees with work stress is reported. High job demands combined with low job control according to the Job Demands-Job Control model, or high effort combined with low rewards according to Effort-Reward Imbalance model, are likely to produce work stress in the majority of employees. Atherosclerotic wall thickening is a validated marker of an increased risk of cardiovascular disease. This study examined the role of childhood and adolescent factors as antecedents of work stress and early atherosclerosis, and in the relationship between them. The Cardiovascular Risk in Young Finns Study, (the CRYF project) started in 1980 when the participants were at the age of three to 18 years. Follow-ups have been conducted every three years until 1992, after that in 1997 and 2001, and the latest is ongoing in 2008. The participants parents reported their socioeconomic position in 1980 and 1983, and their life satisfaction in 1983. Biological risk factors were measured in 1980 and 2001. Type A behaviour was reported in 1986, 1989 and 2001. In the 2001 follow-up when the participants were aged 24 to 39, work stress was assessed from responses to questionnaires on job demands-job control and effort-reward imbalance, and education. Ultrasound measurement of the carotid intima-media thickness (CIMT) was used to assess atherosclerosis. There were 755, 746, 1014 and 494 participants in studies I-IV, respectively. The results showed that low parental socioeconomic position and parental life dissatisfaction during childhood and adolescence predicted higher levels of job strain 18 years later, and that education mediated the relationship between parental socioeconomic position and job strain. Childhood and adolescent family factors were not related to the effort-reward imbalance. Parental life satisfaction was associated with high rewards at work among the men, and high parental socioeconomic position was associated with high reward among the women. Among the men, the eagerness-energy component of Type A behaviour across different developmental periods predicted increased CIMT. Among the women, hard-driving component of Type A behaviour predicted decreased CIMT. Low leadership characteristic in adolescence and early adulthood was associated with both high job strain and increased CIMT, and attenuated the relationship between job strain and CIMT to non-significance in men. The current findings add to the literature on the relationship between job strain and health literature in adopting a developmental perspective. The results imply that work stress does not completely originate from work. There are childhood and adolescent environmental and dispositional effects on work stress and CIMT several years later, and these partly seem to operate through educational attainment.