Acupuncture and rehabilitation of the painful shoulder: study protocol of an ongoing multicentre randomised controlled clinical trial [ISRCTN28687220]

BACKGROUND Although the painful shoulder is one of the most common dysfunctions of the locomotor apparatus, and is frequently treated both at primary healthcare centres and by specialists, little evidence has been reported to support or refute the effectiveness of the treatments most commonly applied. According to the bibliography reviewed, physiotherapy, which is the most common action taken to alleviate this problem, has not yet been proven to be effective, because of the small size of sample groups and the lack of methodological rigor in the papers published on the subject. No reviews have been made to assess the effectiveness of acupuncture in treating this complaint, but in recent years controlled randomised studies have been made and these demonstrate an increasing use of acupuncture to treat pathologies of the soft tissues of the shoulder. In this study, we seek to evaluate the effectiveness of physiotherapy applied jointly with acupuncture, compared with physiotherapy applied with a TENS-placebo, in the treatment of painful shoulder caused by subacromial syndrome (rotator cuff tendinitis and subacromial bursitis). METHODS/DESIGN Randomised controlled multicentre study with blind evaluation by an independent observer and blind, independent analysis. A study will be made of 465 patients referred to the rehabilitation services at participating healthcare centres, belonging to the regional public health systems of Andalusia and Murcia, these patients presenting symptoms of painful shoulder and a diagnosis of subacromial syndrome (rotator cuff tendinitis and subacromial bursitis). The patients will be randomised into two groups: 1) experimental (acupuncture + physiotherapy); 2) control (TENS-placebo + physiotherapy); the administration of rescue medication will also be allowed. The treatment period will have a duration of three weeks. The main result variable will be the change produced on Constant's Shoulder Function Assessment (SFA) Scale; as secondary variables, we will record the changes in diurnal pain intensity on a visual analogue scale (VAS), nocturnal pain intensity on the VAS, doses of non-steroid anti-inflammatory drugs (NSAIDs) taken during the study period, credibility scale for the treatment, degree of improvement perceived by the patient and degree of improvement perceived by the evaluator. A follow up examination will be made at 3, 6 and 12 months after the study period has ended. Two types of population will be considered for analysis: per protocol and per intention to treat. DISCUSSION The discussion will take into account the limitations of the study, together with considerations such as the choice of a simple, safe method to treat this shoulder complaint, the choice of the control group, and the blinding of the patients, evaluators and those responsible for carrying out the final analysis.

Main results of the Monte Carlo studies carried out for nuclear medicine practices within the ORAMED project

The aim of ORAMED work package 4 was the optimization of the medical practices in nuclear medicine during the preparation of radiopharmaceuticals and their administration to the patient. During the project a wide campaign of measurements was performed in the nuclear medicine departments of the collaborating hospitals. Such data were intrinsically characterized by a large variability that depended on the procedure, the employed techniques and the operator's habits. That variability could easily hide some important parameter, for example, the effectiveness of the adopted shielding (for syringe and vial) or the effect of the distances from the source. This information is necessary for a valuable optimization purpose of radiation protection. To this end a sensitivity analysis was carried out through Monte Carlo simulations employing voxel models, representing operator's hand during the considered practices. Such analysis allowed understanding at what extent the range of personal dose equivalent evaluated during measurements can be considered intrinsically related to the procedures. Furthermore, with the Monte Carlo simulations it was possible to study the appropriateness of the shielding usually utilized in these practices.

FRAX® International Task Force of the 2010 Joint International Society for Clinical Densitometry & International Osteoporosis Foundation Position Development Conference.

Osteoporosis is a serious worldwide epidemic. FRAX® is a web-based tool developed by the Sheffield WHO Collaborating Center team, that integrates clinical risk factors and femoral neck BMD and calculates the 10 year fracture probability in order to help health care professionals identify patients who need treatment. However, only 31 countries have a FRAX® calculator. In the absence of a FRAX® model for a particular country, it has been suggested to use a surrogate country for which the epidemiology of osteoporosis most closely approximates the index country. More specific recommendations for clinicians in these countries are not available. In North America, concerns have also been raised regarding the assumptions used to construct the US ethnic specific FRAX® calculators with respect to the correction factors applied to derive fracture probabilities in Blacks, Asians and Hispanics in comparison to Whites. In addition, questions were raised about calculating fracture risk in other ethnic groups e.g., Native Americans and First Canadians. The International Society for Clinical Densitometry (ISCD) in conjunction with the International Osteoporosis Foundation (IOF) assembled an international panel of experts that ultimately developed joint Official Positions of the ISCD and IOF advising clinicians regarding FRAX® usage. As part of the process, the charge of the FRAX® International Task Force was to review and synthesize data regarding geographic and race/ethnic variability in hip fractures, non-hip osteoporotic fractures, and make recommendations about the use of FRAX® in ethnic groups and countries without a FRAX® calculator. This synthesis was presented to the expert panel and constitutes the data on which the subsequent Official Positions are predicated. A summary of the International Task Force composition and charge is presented here.

De novo characterization of the Timema cristinae transcriptome facilitates marker discovery and inference of genetic divergence.

Adaptation to different ecological environments can promote speciation. Although numerous examples of such 'ecological speciation' now exist, the genomic basis of the process, and the role of gene flow in it, remains less understood. This is, at least in part, because systems that are well characterized in terms of their ecology often lack genomic resources. In this study, we characterize the transcriptome of Timema cristinae stick insects, a system that has been researched intensively in terms of ecological speciation, but for which genomic resources have not been previously developed. Specifically, we obtained >1 million 454 sequencing reads that assembled into 84,937 contigs representing approximately 18,282 unique genes and tens of thousands of potential molecular markers. Second, as an illustration of their utility, we used these genomic resources to assess multilocus genetic divergence within both an ecotype pair and a species pair of Timema stick insects. The results suggest variable levels of genetic divergence and gene flow among taxon pairs and genes and illustrate a first step towards future genomic work in Timema.

Adapting the Process Writing Approach to English Language Learners with Special Needs: Using Visuals

The available literature on the writing characteristics and best practices to teach writing to English Language Learners who also present some disability is scarce. In order to understand and provide some insight on the developments in this field, I propose an adaptation of the Process Writing Approach based on a literature review of the existing bibliography about the writing characteristics of English Language Learners, Special Needs Learners, and English Language Learners with Special Needs’ writing, the effects of the Process Writing Approach in teaching writing to these groups, and the use of visuals in writing instruction. The main assumptions of this study are: a) The Process Writing Approach provides an opportunity to differentiate instruction to ELLs with special needs and gives them additional opportunities to bring their funds of knowledge to the classroom, improving their writing, and b) By allowing students to rely on visuals in different phases of the writing process teachers will be addressing the needs of both visual and verbal learners, therefore allowing students more options to develop writing skills. The main pedagogical implication is that by dividing writing in recursive stages and inserting visuals as scaffolding throughout the entire writing process, teachers will provide an alternative approach to writing instruction that may be more effective to English Language Learners with Special Needs.

FRAX(®) Clinical Task Force of the 2010 Joint International Society for Clinical Densitometry & International Osteoporosis Foundation Position Development Conference.

The World Health Organization fracture risk assessment tool, FRAX(®), is an advance in clinical care that can assist in clinical decision-making. However, with increasing clinical utilization, numerous questions have arisen regarding how to best estimate fracture risk in an individual patient. Recognizing the need to assist clinicians in optimal use of FRAX(®), the International Osteoporosis Foundation (IOF) in conjunction with the International Society for Clinical Densitometry (ISCD) assembled an international panel of experts that ultimately developed joint Official Positions of the ISCD and IOF advising clinicians regarding FRAX(®) usage. As part of the process, the charge of the FRAX(®) Clinical Task Force was to review and synthesize data surrounding a number of recognized clinical risk factors including rheumatoid arthritis, smoking, alcohol, prior fracture, falls, bone turnover markers and glucocorticoid use. This synthesis was presented to the expert panel and constitutes the data on which the subsequent Official Positions are predicated. A summary of the Clinical Task Force composition and charge is presented here.

Effectiveness of a drug dosing service provided by community pharmacists in polymedicated elderly patients with renal impairment a comparative study

Background: Drug dosing errors are common in renal-impaired patients. Appropriate dosing adjustment and drug selection is important to ensure patients" safety and to avoid adverse drug effects and poor outcomes. There are few studies on this issue in community pharmacies. The aims of this study were, firstly, to determine the prevalence of dosing inadequacy as a consequence of renal impairment in patients over 65 taking 3 or more drug products who were being attended in community pharmacies and, secondly, to evaluate the effectiveness of the community pharmacist"s intervention in improving dosing inadequacy in these patients when compared with usual care. Methods: The study was carried out in 40 Spanish community pharmacies. The study had two phases: the first, with an observational, multicentre, cross sectional design, served to determine the dosing inadequacy, the drug-related problems per patient and to obtain the control group. The second phase, with a controlled study with historical control group, was the intervention phase. When dosing adjustments were needed, the pharmacists made recommendations to the physicians. A comparison was made between the control and the intervention group regarding the prevalence of drug dosing inadequacy and the mean number of drug-related problems per patient. Results: The mean of the prevalence of drug dosing inadequacy was 17.5% [95% CI 14.6-21.5] in phase 1 and 15.5% [95% CI 14.5-16.6] in phase 2. The mean number of drug-related problems per patient was 0.7 [95% CI 0.5-0.8] in phase 1 and 0.50 [95% CI 0.4-0.6] in phase 2. The difference in the prevalence of dosing inadequacy between the control and intervention group before the pharmacists" intervention was 0.73% [95% CI (−6.0) - 7.5] and after the pharmacists" intervention it was 13.5% [95% CI 8.0 - 19.5] (p < 0.001) while the difference in the mean of drug-related problems per patient before the pharmacists" intervention was 0.05 [95% CI( -0.2) - 0.3] and following the intervention it was 0.5 [95% CI 0.3 - 0.7] (p < 0.001). Conclusion: A drug dosing adjustment service for elderly patients with renal impairment in community pharmacies can increase the proportion of adequate drug dosing, and improve the drug-related problems per patient. Collaborative practice with physicians can improve these results.

A comparison of the processes of institutionalisation of political economy in Spain and Italy (1860-1900)

[spa] El estudio de los procesos a través de los cuales la economía política se ha transformado en una disciplina académica es un área de creciente interés en la historia del pensamiento económico. Dicho estudio se ha abordado a través del análisis de la importancia de la economía política en un conjunto de instituciones, consideradas clave en la expansión de la economía en las sociedades occidentales en la segunda mitad del siglo XIX y primeras décadas del XX: universidades, sociedades económicas, publicaciones periódicas de contenido económico y los parlamentos nacionales. Este papel presenta una comparación entre los desarrollos del proceso de institutionalización de la economía política en España e Italia, a través del estudio de la presencia de esta disciplina en las instituciones mencionadas para el periodo 1860-1900. El objetivo es medir la posible existencia de una vía común en la institucionalización de la economía política en ambos países, como un primer paso hacia la elaboración de un modelo supranacional de institucionalización de la economía en este periodo.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

A comparison of the processes of institutionalisation of political economy in Spain and Italy (1860-1900)

[spa] El estudio de los procesos a través de los cuales la economía política se ha transformado en una disciplina académica es un área de creciente interés en la historia del pensamiento económico. Dicho estudio se ha abordado a través del análisis de la importancia de la economía política en un conjunto de instituciones, consideradas clave en la expansión de la economía en las sociedades occidentales en la segunda mitad del siglo XIX y primeras décadas del XX: universidades, sociedades económicas, publicaciones periódicas de contenido económico y los parlamentos nacionales. Este papel presenta una comparación entre los desarrollos del proceso de institutionalización de la economía política en España e Italia, a través del estudio de la presencia de esta disciplina en las instituciones mencionadas para el periodo 1860-1900. El objetivo es medir la posible existencia de una vía común en la institucionalización de la economía política en ambos países, como un primer paso hacia la elaboración de un modelo supranacional de institucionalización de la economía en este periodo.

Fish passage assessment at the most downstream barrier of the Ebro River (NE Iberian Peninsula)

Fish passage at artificial barriers is necessary for the conservation of healthy fish stocks. The first barrier that migratory fish encounter when ascending the Ebro River is the Xerta Weir, where a pool-type fishway was constructed in 2008. From 2007 to 2010, boat electrofishing surveys were conducted in the Ebro River downstream of the Xerta Weir to assess the potential pool of species that could use the fishway. Nine native and 12 exotic species were captured, the latter comprising 62 % of the relative abundance and 70 % of the biomass. A combination of video recording, electrofishing and trapping was used to assess the effectiveness of the fishway in facilitating the passage of fish. Eight species were detected using the fishway, of which five were native (Liza ramada, Anguilla anguilla, Barbus graellsii, Gobio lozanoi and Salaria fluviatilis) and three exotic (Alburnus alburnus, Cyprinus carpio and Rutilus rutilus). Only L. ramada used the fishway in substantial numbers. The rate of fish passage was the highest from June to August and decreased afterwards. The effectiveness of the fishway might be lowered by areas of turbulence within the fishway and by distraction flows from a nearby hydropower station

Evaluation of the Baladi Indirect Tensile Apparatus, MLR-89-08, 1990

Dr. Gilbert Y. Baladi of Michigan State University has developed a new device intended for reliable determination of asphalt concrete mechanical properties such as Poisson's ratio, resilient modulus, and indirect tensile strength. The device is the result of an effort to improve upon procedures and equipment currently available for evaluation of mechanical properties. A duplicate of this device was fabricated in the Iowa Department of Transportation, Materials Lab Machine Shop in 1989. This report details the results of an evaluation of the effectiveness of the device in testing Marshall specimens for indirect tensile strength as compared to results obtained with standard equipment described in AASHTO T-283. Conclusions of the report are: l. Results obtained with the Baladi device average 6 to 8 percent higher than those obtained with the standard device. 2. The standard device exhibited a slightly greater degree of precision than did the Baladi device. 3. The Baladi device is easier and quicker to use than the standard apparatus. 4. It may be possible to estimate indirect tensile strength from the stability/flow ratio by dividing by factors of 1.8 and 1.5 for 50 blow and 75 blow mixes respectively.

Effectiveness of a drug dosing service provided by community pharmacists in polymedicated elderly patients with renal impairment a comparative study

Background: Drug dosing errors are common in renal-impaired patients. Appropriate dosing adjustment and drug selection is important to ensure patients" safety and to avoid adverse drug effects and poor outcomes. There are few studies on this issue in community pharmacies. The aims of this study were, firstly, to determine the prevalence of dosing inadequacy as a consequence of renal impairment in patients over 65 taking 3 or more drug products who were being attended in community pharmacies and, secondly, to evaluate the effectiveness of the community pharmacist"s intervention in improving dosing inadequacy in these patients when compared with usual care. Methods: The study was carried out in 40 Spanish community pharmacies. The study had two phases: the first, with an observational, multicentre, cross sectional design, served to determine the dosing inadequacy, the drug-related problems per patient and to obtain the control group. The second phase, with a controlled study with historical control group, was the intervention phase. When dosing adjustments were needed, the pharmacists made recommendations to the physicians. A comparison was made between the control and the intervention group regarding the prevalence of drug dosing inadequacy and the mean number of drug-related problems per patient. Results: The mean of the prevalence of drug dosing inadequacy was 17.5% [95% CI 14.6-21.5] in phase 1 and 15.5% [95% CI 14.5-16.6] in phase 2. The mean number of drug-related problems per patient was 0.7 [95% CI 0.5-0.8] in phase 1 and 0.50 [95% CI 0.4-0.6] in phase 2. The difference in the prevalence of dosing inadequacy between the control and intervention group before the pharmacists" intervention was 0.73% [95% CI (−6.0) - 7.5] and after the pharmacists" intervention it was 13.5% [95% CI 8.0 - 19.5] (p < 0.001) while the difference in the mean of drug-related problems per patient before the pharmacists" intervention was 0.05 [95% CI( -0.2) - 0.3] and following the intervention it was 0.5 [95% CI 0.3 - 0.7] (p < 0.001). Conclusion: A drug dosing adjustment service for elderly patients with renal impairment in community pharmacies can increase the proportion of adequate drug dosing, and improve the drug-related problems per patient. Collaborative practice with physicians can improve these results.

Effectiveness of a drug dosing service provided by community pharmacists in polymedicated elderly patients with renal impairment a comparative study

Background: Drug dosing errors are common in renal-impaired patients. Appropriate dosing adjustment and drug selection is important to ensure patients" safety and to avoid adverse drug effects and poor outcomes. There are few studies on this issue in community pharmacies. The aims of this study were, firstly, to determine the prevalence of dosing inadequacy as a consequence of renal impairment in patients over 65 taking 3 or more drug products who were being attended in community pharmacies and, secondly, to evaluate the effectiveness of the community pharmacist"s intervention in improving dosing inadequacy in these patients when compared with usual care. Methods: The study was carried out in 40 Spanish community pharmacies. The study had two phases: the first, with an observational, multicentre, cross sectional design, served to determine the dosing inadequacy, the drug-related problems per patient and to obtain the control group. The second phase, with a controlled study with historical control group, was the intervention phase. When dosing adjustments were needed, the pharmacists made recommendations to the physicians. A comparison was made between the control and the intervention group regarding the prevalence of drug dosing inadequacy and the mean number of drug-related problems per patient. Results: The mean of the prevalence of drug dosing inadequacy was 17.5% [95% CI 14.6-21.5] in phase 1 and 15.5% [95% CI 14.5-16.6] in phase 2. The mean number of drug-related problems per patient was 0.7 [95% CI 0.5-0.8] in phase 1 and 0.50 [95% CI 0.4-0.6] in phase 2. The difference in the prevalence of dosing inadequacy between the control and intervention group before the pharmacists" intervention was 0.73% [95% CI (−6.0) - 7.5] and after the pharmacists" intervention it was 13.5% [95% CI 8.0 - 19.5] (p < 0.001) while the difference in the mean of drug-related problems per patient before the pharmacists" intervention was 0.05 [95% CI( -0.2) - 0.3] and following the intervention it was 0.5 [95% CI 0.3 - 0.7] (p < 0.001). Conclusion: A drug dosing adjustment service for elderly patients with renal impairment in community pharmacies can increase the proportion of adequate drug dosing, and improve the drug-related problems per patient. Collaborative practice with physicians can improve these results.

Effectiveness of Roadway Safety Improvements, 2001

The Iowa Department of Transportation (DOT) continuously assesses the likely causes of crashes at high-crash locations throughout the Iowa roadway network and designs solutions to reduce the incidences of crashes. This research analyzed approximately 100 safety projects constructed in the past 10 years to see what affect they had on highway safety. The projects are grouped into seven categories as defined by their scope of work: (1) install new traffic signal, (2) add turn lane(s), (3) install new signal and turn lane(s), (4) add left-turn phasing, (5) add left-turn phasing and turn lane(s), (6) replace pedestal mount signals with mast arm signals, and (7) other geometric improvements. The project makes use of an extensive statewide crash database. The results of the project will evaluate the assumed reduction factors and benefit/cost (B/C) analysis, determine the actual cost effectiveness of the Iowa DOT's safety programs, and allow the Iowa DOT to better prioritize future improvements.