Cellulosic Ethanol: The Benifits, Obstacles, and Implications for Nebraska

Abstract Ethanol is a biofuel that has unique capabilities to mitigate global climate change by reducing greenhouse gas emissions while simultaneously supporting rural economies and decreasing the United States’ dependence on foreign oil. Currently, the state of Nebraska depends on corn ethanol, which may be unsustainable. Cellulosic ethanol is a promising alternative but it is not without its problems, including high production costs and potential environmental damage. This thesis is an attempt to understand the benefits, downfalls, and processes of corn-based and cellulosic ethanol and the potential implications to Nebraska. This research should shed some light on the current obstacles and environmental problems involved with production, as well as evaluate the potential economic benefits to Nebraska, while pointing out issues that should be further researched before implementation.

Agua de reuso e seu efeito sobre parâmetros fisiológicos em manjericão (Ocimum basilicum L.)

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Chemical Modifications in Styrene-Butadiene Rubber after Microwave Devulcanization

Microwave devulcanization has been studied as a method for elastomer recycling, which is based on the conversion of the reticulated and infusible structure of thermosetting rubbers in free polymeric chains able to be remolded by thermomechanical processing in recycling operations for the manufacture of other products. Elastomeric wastes are often irregularly discarded in nature, producing serious environmental damage, and their mechanical recycling is still considered a challenge. Thus, the development of alternatives for elastomer recycling is directly related to the actions of sustainable development and economic benefits to companies that pay to discard their wastes. The aim of this work is to evaluate the chemical modifications occurring in styrene butadiene rubber (SBR) after microwave devulcanization. Compounds of SBR were vulcanized in the presence of vulcanization agents and variable amounts of carbon black, and then the rubbers were milled and submitted to microwave treatment. Only the SBR with high carbon black content shows some portion of devulcanized material. However, the rubber with lower content of carbon black which was devulcanized by microwave radiation shows an increase in cross-link density. The microwave treatment also causes cross-link breaks mainly in polysulfidic bonds as well as decomposition of chemical groups containing sulfur attached to the chemical structure of SBR, while. the chemical bonds of higher energy such as monosulfidic bonds remain preserved. The improvement of the microwave method for rubber devulcanization represents a way for viable recycling of thermosetting rubbers.

Environmental assessment of residues generated after consecutive acid-base pretreatment of sugarcane bagasse by advanced oxidative process

Abstract Background Biofuels produced from sugarcane bagasse (SB) have shown promising results as a suitable alternative of gasoline. Biofuels provide unique, strategic, environmental and socio-economic benefits. However, production of biofuels from SB has negative impact on environment due to the use of harsh chemicals during pretreatment. Consecutive sulfuric acid-sodium hydroxide pretreatment of SB is an effective process which eventually ameliorates the accessibility of cellulase towards cellulose for the sugars production. Alkaline hydrolysate of SB is black liquor containing high amount of dissolved lignin. Results This work evaluates the environmental impact of residues generated during the consecutive acid-base pretreatment of SB. Advanced oxidative process (AOP) was used based on photo-Fenton reaction mechanism (Fenton Reagent/UV). Experiments were performed in batch mode following factorial design L9 (Taguchi orthogonal array design of experiments), considering the three operation variables: temperature (°C), pH, Fenton Reagent (Fe2+/H2O2) + ultraviolet. Reduction of total phenolics (TP) and total organic carbon (TOC) were responsive variables. Among the tested conditions, experiment 7 (temperature, 35°C; pH, 2.5; Fenton reagent, 144 ml H2O2+153 ml Fe2+; UV, 16W) revealed the maximum reduction in TP (98.65%) and TOC (95.73%). Parameters such as chemical oxygen demand (COD), biochemical oxygen demand (BOD), BOD/COD ratio, color intensity and turbidity also showed a significant change in AOP mediated lignin solution than the native alkaline hydrolysate. Conclusion AOP based on Fenton Reagent/UV reaction mechanism showed efficient removal of TP and TOC from sugarcane bagasse alkaline hydrolysate (lignin solution). To the best of our knowledge, this is the first report on statistical optimization of the removal of TP and TOC from sugarcane bagasse alkaline hydrolysate employing Fenton reagent mediated AOP process.

Essays on the political economy of European integration

Recently, a rising interest in political and economic integration/disintegration issues has been developed in the political economy field. This growing strand of literature partly draws on traditional issues of fiscal federalism and optimum public good provision and focuses on a trade-off between the benefits of centralization, arising from economies of scale or externalities, and the costs of harmonizing policies as a consequence of the increased heterogeneity of individual preferences in an international union or in a country composed of at least two regions. This thesis stems from this strand of literature and aims to shed some light on two highly relevant aspects of the political economy of European integration. The first concerns the role of public opinion in the integration process; more precisely, how economic benefits and costs of integration shape citizens' support for European Union (EU) membership. The second is the allocation of policy competences among different levels of government: European, national and regional. Chapter 1 introduces the topics developed in this thesis by reviewing the main recent theoretical developments in the political economy analysis of integration processes. It is structured as follows. First, it briefly surveys a few relevant articles on economic theories of integration and disintegration processes (Alesina and Spolaore 1997, Bolton and Roland 1997, Alesina et al. 2000, Casella and Feinstein 2002) and discusses their relevance for the study of the impact of economic benefits and costs on public opinion attitude towards the EU. Subsequently, it explores the links existing between such political economy literature and theories of fiscal federalism, especially with regard to normative considerations concerning the optimal allocation of competences in a union. Chapter 2 firstly proposes a model of citizens’ support for membership of international unions, with explicit reference to the EU; subsequently it tests the model on a panel of EU countries. What are the factors that influence public opinion support for the European Union (EU)? In international relations theory, the idea that citizens' support for the EU depends on material benefits deriving from integration, i.e. whether European integration makes individuals economically better off (utilitarian support), has been common since the 1970s, but has never been the subject of a formal treatment (Hix 2005). A small number of studies in the 1990s have investigated econometrically the link between national economic performance and mass support for European integration (Eichenberg and Dalton 1993; Anderson and Kalthenthaler 1996), but only making informal assumptions. The main aim of Chapter 2 is thus to propose and test our model with a view to providing a more complete and theoretically grounded picture of public support for the EU. Following theories of utilitarian support, we assume that citizens are in favour of membership if they receive economic benefits from it. To develop this idea, we propose a simple political economic model drawing on the recent economic literature on integration and disintegration processes. The basic element is the existence of a trade-off between the benefits of centralisation and the costs of harmonising policies in presence of heterogeneous preferences among countries. The approach we follow is that of the recent literature on the political economy of international unions and the unification or break-up of nations (Bolton and Roland 1997, Alesina and Wacziarg 1999, Alesina et al. 2001, 2005a, to mention only the relevant). The general perspective is that unification provides returns to scale in the provision of public goods, but reduces each member state’s ability to determine its most favoured bundle of public goods. In the simple model presented in Chapter 2, support for membership of the union is increasing in the union’s average income and in the loss of efficiency stemming from being outside the union, and decreasing in a country’s average income, while increasing heterogeneity of preferences among countries points to a reduced scope of the union. Afterwards we empirically test the model with data on the EU; more precisely, we perform an econometric analysis employing a panel of member countries over time. The second part of Chapter 2 thus tries to answer the following question: does public opinion support for the EU really depend on economic factors? The findings are broadly consistent with our theoretical expectations: the conditions of the national economy, differences in income among member states and heterogeneity of preferences shape citizens’ attitude towards their country’s membership of the EU. Consequently, this analysis offers some interesting policy implications for the present debate about ratification of the European Constitution and, more generally, about how the EU could act in order to gain more support from the European public. Citizens in many member states are called to express their opinion in national referenda, which may well end up in rejection of the Constitution, as recently happened in France and the Netherlands, triggering a European-wide political crisis. These events show that nowadays understanding public attitude towards the EU is not only of academic interest, but has a strong relevance for policy-making too. Chapter 3 empirically investigates the link between European integration and regional autonomy in Italy. Over the last few decades, the double tendency towards supranationalism and regional autonomy, which has characterised some European States, has taken a very interesting form in this country, because Italy, besides being one of the founding members of the EU, also implemented a process of decentralisation during the 1970s, further strengthened by a constitutional reform in 2001. Moreover, the issue of the allocation of competences among the EU, the Member States and the regions is now especially topical. The process leading to the drafting of European Constitution (even if then it has not come into force) has attracted much attention from a constitutional political economy perspective both on a normative and positive point of view (Breuss and Eller 2004, Mueller 2005). The Italian parliament has recently passed a new thorough constitutional reform, still to be approved by citizens in a referendum, which includes, among other things, the so called “devolution”, i.e. granting the regions exclusive competence in public health care, education and local police. Following and extending the methodology proposed in a recent influential article by Alesina et al. (2005b), which only concentrated on the EU activity (treaties, legislation, and European Court of Justice’s rulings), we develop a set of quantitative indicators measuring the intensity of the legislative activity of the Italian State, the EU and the Italian regions from 1973 to 2005 in a large number of policy categories. By doing so, we seek to answer the following broad questions. Are European and regional legislations substitutes for state laws? To what extent are the competences attributed by the European treaties or the Italian Constitution actually exerted in the various policy areas? Is their exertion consistent with the normative recommendations from the economic literature about their optimum allocation among different levels of government? The main results show that, first, there seems to be a certain substitutability between EU and national legislations (even if not a very strong one), but not between regional and national ones. Second, the EU concentrates its legislative activity mainly in international trade and agriculture, whilst social policy is where the regions and the State (which is also the main actor in foreign policy) are more active. Third, at least two levels of government (in some cases all of them) are significantly involved in the legislative activity in many sectors, even where the rationale for that is, at best, very questionable, indicating that they actually share a larger number of policy tasks than that suggested by the economic theory. It appears therefore that an excessive number of competences are actually shared among different levels of government. From an economic perspective, it may well be recommended that some competences be shared, but only when the balance between scale or spillover effects and heterogeneity of preferences suggests so. When, on the contrary, too many levels of government are involved in a certain policy area, the distinction between their different responsibilities easily becomes unnecessarily blurred. This may not only leads to a slower and inefficient policy-making process, but also risks to make it too complicate to understand for citizens, who, on the contrary, should be able to know who is really responsible for a certain policy when they vote in national,local or European elections or in referenda on national or European constitutional issues.

Self-Organizing Mechanisms for Task Allocation in a Knowledge-Based Economy

A prevalent claim is that we are in knowledge economy. When we talk about knowledge economy, we generally mean the concept of “Knowledge-based economy” indicating the use of knowledge and technologies to produce economic benefits. Hence knowledge is both tool and raw material (people’s skill) for producing some kind of product or service. In this kind of environment economic organization is undergoing several changes. For example authority relations are less important, legal and ownership-based definitions of the boundaries of the firm are becoming irrelevant and there are only few constraints on the set of coordination mechanisms. Hence what characterises a knowledge economy is the growing importance of human capital in productive processes (Foss, 2005) and the increasing knowledge intensity of jobs (Hodgson, 1999). Economic processes are also highly intertwined with social processes: they are likely to be informal and reciprocal rather than formal and negotiated. Another important point is also the problem of the division of labor: as economic activity becomes mainly intellectual and requires the integration of specific and idiosyncratic skills, the task of dividing the job and assigning it to the most appropriate individuals becomes arduous, a “supervisory problem” (Hogdson, 1999) emerges and traditional hierarchical control may result increasingly ineffective. Not only specificity of know how makes it awkward to monitor the execution of tasks, more importantly, top-down integration of skills may be difficult because ‘the nominal supervisors will not know the best way of doing the job – or even the precise purpose of the specialist job itself – and the worker will know better’ (Hogdson,1999). We, therefore, expect that the organization of the economic activity of specialists should be, at least partially, self-organized. The aim of this thesis is to bridge studies from computer science and in particular from Peer-to-Peer Networks (P2P) to organization theories. We think that the P2P paradigm well fits with organization problems related to all those situation in which a central authority is not possible. We believe that P2P Networks show a number of characteristics similar to firms working in a knowledge-based economy and hence that the methodology used for studying P2P Networks can be applied to organization studies. Three are the main characteristics we think P2P have in common with firms involved in knowledge economy: - Decentralization: in a pure P2P system every peer is an equal participant, there is no central authority governing the actions of the single peers; - Cost of ownership: P2P computing implies shared ownership reducing the cost of owing the systems and the content, and the cost of maintaining them; - Self-Organization: it refers to the process in a system leading to the emergence of global order within the system without the presence of another system dictating this order. These characteristics are present also in the kind of firm that we try to address and that’ why we have shifted the techniques we adopted for studies in computer science (Marcozzi et al., 2005; Hales et al., 2007 [39]) to management science.

La tutela del disoccupato nel mercato del lavoro. Dal sostegno del reddito ai servizi per l'occupazione

La tesi affronta il tema degli istituti e degli strumenti di tutela della condizione di disoccupazione. In mancanza d’una nozione giuridica generale di disoccupazione, l’obiettivo è quello di ricercare gli elementi comuni ai differenti istituti in grado di definire l’ambito della protezione garantita alla persona priva d’impiego. Lo studio fornisce, dapprima, una complessiva ricognizione storico-critica degli strumenti per il sostegno del reddito nelle ipotesi di mancanza di lavoro. L’esame dei modelli d’intervento legislativo evidenzia finalità, caratteristiche e criticità dei singoli istituti, sia di quelli più consolidati, che degli interventi più recenti. La seconda parte della tesi si propone d’integrare la ricognizione delle forme di tutela economica con l’analisi delle politiche attive nel mercato del lavoro e degli interventi a sostegno all’occupabilità. L’intento è di verificare le modalità attraverso le quali l’ordinamento tenta di collegare tutela del reddito e promozione dell’occupazione. La ricerca affronta anche la questione dei limiti alla libertà di circolazione nell’Unione Europea dei cittadini non lavoratori, nonché il condizionamento determinato dalle misure che riducono o scoraggiano l’esportabilità delle prestazioni previdenziali negli altri Paesi europei. La parte finale si propone d’individuare gli elementi che caratterizzano il complesso degli istituti analizzati, al fine di verificare a quale evento giuridico l’ordinamento offra protezione. Lo studio identifica due elementi rilevanti: la condizione di “mancanza di lavoro”, che accomuna l’intervento per la disoccupazione e quello a favore dei rapporti di lavoro sospesi, nonché l’attualità dello stato di disoccupazione, parametro generale per gli interventi protettivi. L’analisi svolta sottolinea, però, che i meccanismi di c.d. condizionalità per l’accesso alle prestazioni economiche e ai servizi per l’impiego non consentono un’adeguata promozione della qualità del lavoro e della professionalità del lavoratore. La tesi individua un possibile terreno di sviluppo della protezione della condizione del disoccupato nell’integrazione tra strumenti di sostegno all’impiego e interventi a base universalistica.

Impact Assessment: Organic Cotton in Jalalabad, Oblast, Kyrgyztan

The aim of the study was to examine the economic performance as well as perceived social and environmental impacts of organic cotton in Southern Kyrgyzstan on the basis of a comparative field study (44 certified organic farmers and 33 conventional farmers) carried out in 2009. It also investigated farmers’ motivation for and assessment of conversion to organic farming. Cotton yields on organic farms were found to be 10% lower whereby input costs per unit were 42% lower, which resulted in organic farmers having a 20% higher revenue from cotton. Due to lower input costs and organic and fair trade price premiums the average gross margin from organic cotton was 27%. In addition to direct economic benefits organic farmers enjoy a number of additional benefits such as easy access to credits on favourable terms, provision with uncontaminated cotton cooking oil and seed cake as animal feed, marketing support as well as extension and training, services provided by the newly established organic service provider. A big majority of organic farmers perceives an improvement of soil qualities, improved health conditions, and positively assesses their previous decision to convert to organic farming. The major disadvantage of organic farming is the high manual labour input required. In the study area, where manual farm work is mainly women’s work and male labour migration widespread, women are most affected by this negative aspect of organic farming. Altogether, the results suggest that despite the inconvenience of higher work load the advantages of organic farming outweigh the disadvantages and that conversion to organic farming can improve the livelihoods of small-scale farmers.

Potential and limitations of organic and fair trade cotton for improving livelihoods of smallholders: evidence from Central Asia

Cotton is a leading agricultural non-food commodity associated with soil degradation, water pollution and pesticide poisoning due to high levels of agrochemical inputs. Organic farming is often promoted as a means of addressing the economic, environmental and health risks of conventional cotton production, and it is slowly gaining ground in the global cotton market. Organic and fair trade cotton are widely seen as opportunities for smallholder farmers to improve their livelihoods thanks to higher returns, lower input costs and fewer risks. Despite an increasing number of studies comparing the profitability of organic and non-organic farming systems in developing and industrialized countries, little has been published on organic farming in Central Asia. The aim of this article is to describe the economic performance and perceived social and environmental impacts of organic cotton in southern Kyrgyzstan, drawing on a comparative field study conducted by the author in 2009. In addition to economic and environmental aspects, the study investigated farmers’ motivations toward and assessment of conversion to organic farming. Cotton yields on organic farms were found to be 10% lower, while input costs per unit were 42% lower; as a result, organic farmers’ cotton revenues were 20% higher. Due to lower input costs as well as organic and fair trade price premiums, the average gross margin from organic cotton was 27% higher. In addition to direct economic benefits, organic farmers enjoy other benefits, such as easy access to credit on favorable terms, provision of uncontaminated cottonseed cooking oil and cottonseed cake as animal feed, and marketing support as well as extension and training services provided by newly established organic service providers. The majority of organic farmers perceive improved soil quality, improved health conditions, and positively assess their initial decision to convert to organic farming. The major disadvantage of organic farming is the high manual labor input required. In the study area, where manual farm work is mainly women's work and male labor migration is widespread, women are most affected by this negative aspect of organic farming. Altogether, the results suggest that, despite the inconvenience of a higher workload, the advantages of organic farming outweigh its disadvantages and that conversion to organic farming improves the livelihoods of small-scale farmers.

Public preferences of the Great Lakes Environment : a Lake Michigan pilot study

The Great Lakes watershed is home to over 40 million people, and the health of the Great Lakes ecosystem is vital to the overall economic, societal, and environmental health of the U.S. and Canada. However, environmental issues related to them are sometimes overlooked. Policymakers and the public face the challenges of balancing economic benefits with the need to conserve and/or replenish regional natural resources to ensure long term prosperity. From the literature review, nine critical stressors of ecological services were delineated, which include pollution and contamination, agricultural erosion, non-native species, degraded recreational resources, loss of wetlands habitat, climate change, risk of clean water shortage, vanishing sand dunes, and population overcrowding; this list was validated through a series of stakeholder discussions and focus groups in Grand Rapids. Focus groups were conducted in Grand Rapids to examine the awareness of, concern with, and willingness to expend resources on these stressors. Stressors that the respondents have direct contact with tend to be the most important. The focus group results show that concern related to pollution and contamination is much higher than for any of the other stressors. Low responses to climate change result in recommendations for outreach programs.

Vergleich der umweltrelevanten Faktoren von Holzfurnierlagenverbundwerkstoffen (WVC – Wood Veneer Composite) und metallischen Werkstoffen am Praxisbeispiel eines Skidfördersystems

Für eine Beurteilung von Produkten bzw. Produktsystemen im Maschinenbau spielen neben technischen Kennwerten immer mehr die Umweltauswirkungen der Systeme eine wichtige Rolle. Diese Anforderungen haben die Nachfrage für nachhaltige und umweltfreundliche Konstruktionswerkstoffe im Maschinenbau erhöht. Eine Möglichkeit für solche ökologisch vorteilhaften Werkstoffe stellen ausgewählte Holzwerkstoffe dar. Mit diesen Holzwerkstoffen sollen technische Produkte entwickelt werden, welche den Unternehmen die Möglichkeit eröffnet, ihren unternehmerischen Beitrag zur Nachhaltigkeit zu steigern und wirtschaftliche Vorteile zu erzielen. Durch diesen Ansatz ist ein gewisses Maß an Ressourcen- und Energieeffizienz verbunden, dass sich kurzfristig und / oder langfristig wirtschaftlich lohnt. Ein damit verbundener gesellschaftlicher Imagegewinn erzeugt einen zusätzlichen Nutzen. Als sogenannte GLP (Green Logistics Plant) wird diese Art der Holzkonstruktion gegenwärtig im Bereich der Fördertechnik entwickelt und angewendet. Ein Anwendungsbeispiel innerhalb der GLP stellt das Gestellsystem für einen Skidförderer dar. Um die ökologische Wirkung der Konstruktionswerkstoffe transparent und nachvollziehbar zu untersuchen, werden vordergründig die Kategorien des Treibhauspotenzials und des (Primär-) Energieaufwandes genutzt. Weiterhin werden die Wirkungskategorien Versauerung, Eutrophierung, Sommersmog und Ozonabbau analysiert. Ergänzend zu bestehenden Untersuchungen soll die ökologische Vorteilhaftigkeit von Holzfurnierlagenverbundwerkstoffe (Wood Veneer Composite – WVC), Baustahl, verzinktem Stahl und Aluminiumlegierungen in der Lebensphase Produktion untersucht werden. Anschließend werden die Ergebnisse auf das Gestell eines Skid-Fördersystems aus WVC und Baustahl übertragen.

Explaining Variations in Client Extra Costs between Software Projects Offshored to India

Gaining economic benefits from substantially lower labor costs has been reported as a major reason for offshoring labor-intensive information systems services to low-wage countries. However, if wage differences are so high, why is there such a high level of variation in the economic success between offshored IS projects? This study argues that offshore outsourcing involves a number of extra costs for the ^his paper was recommended for acceptance by Associate Guest Editor Erran Carmel. client organization that account for the economic failure of offshore projects. The objective is to disaggregate these extra costs into their constituent parts and to explain why they differ between offshored software projects. The focus is on software development and maintenance projects that are offshored to Indian vendors. A theoretical framework is developed a priori based on transaction cost economics (TCE) and the knowledge-based view of the firm, comple mented by factors that acknowledge the specific offshore context The framework is empirically explored using a multiple case study design including six offshored software projects in a large German financial service institution. The results of our analysis indicate that the client incurs post contractual extra costs for four types of activities: (1) re quirements specification and design, (2) knowledge transfer, (3) control, and (4) coordination. In projects that require a high level of client-specific knowledge about idiosyncratic business processes and software systems, these extra costs were found to be substantially higher than in projects where more general knowledge was needed. Notably, these costs most often arose independently from the threat of oppor tunistic behavior, challenging the predominant TCE logic of market failure. Rather, the client extra costs were parti cularly high in client-specific projects because the effort for managing the consequences of the knowledge asymmetries between client and vendor was particularly high in these projects. Prior experiences of the vendor with related client projects were found to reduce the level of extra costs but could not fully offset the increase in extra costs in highly client-specific projects. Moreover, cultural and geographic distance between client and vendor as well as personnel turnover were found to increase client extra costs. Slight evidence was found, however, that the cost-increasing impact of these factors was also leveraged in projects with a high level of required client-specific knowledge (moderator effect).

Acute pain therapy in German hospitals as competitive factor : Do competition, ownership and case severity influence the practice of acute pain therapy?

BACKGROUND Due to the implementation of the diagnosis-related groups (DRG) system, the competitive pressure on German hospitals increased. In this context it has been shown that acute pain management offers economic benefits for hospitals. The aim of this study was to analyze the impact of the competitive situation, the ownership and the economic resources required on structures and processes for acute pain management. MATERIAL AND METHODS A standardized questionnaire on structures and processes of acute pain management was mailed to the 885 directors of German departments of anesthesiology listed as members of the German Society of Anesthesiology and Intensive Care Medicine (DGAI, Deutsche Gesellschaft für Anästhesiologie und Intensivmedizin). RESULTS For most hospitals a strong regional competition existed; however, this parameter affected neither the implementation of structures nor the recommended treatment processes for pain therapy. In contrast, a clear preference for hospitals in private ownership to use the benchmarking tool QUIPS (quality improvement in postoperative pain therapy) was found. These hospitals also presented information on coping with the management of pain in the corporate clinic mission statement more often and published information about the quality of acute pain management in the quality reports more frequently. No differences were found between hospitals with different forms of ownership in the implementation of acute pain services, quality circles, expert standard pain management and the implementation of recommended processes. Hospitals with a higher case mix index (CMI) had a certified acute pain management more often. The corporate mission statement of these hospitals also contained information on how to cope with pain, presentation of the quality of pain management in the quality report, implementation of quality circles and the implementation of the expert standard pain management more frequently. There were no differences in the frequency of using the benchmarking tool QUIPS or the implementation of recommended treatment processes with respect to the CMI. CONCLUSION In this survey no effect of the competitive situation of hospitals on acute pain management could be demonstrated. Private ownership and a higher CMI were more often associated with structures of acute pain management which were publicly accessible in terms of hospital marketing.

Evaluating the impact of vertical integration on health system peformance

Vertical integration is grounded in economic theory as a corporate strategy for reducing cost and enhancing efficiency. There were three purposes for this dissertation. The first was to describe and understand vertical integration theory. The review of the economic theory established vertical integration as a corporate cost reduction strategy in response to environmental, structural and performance dimensions of the market. The second purpose was to examine vertical integration in the context of the health care industry, which has greater complexity, higher instability, and more unstable demand than other industries, although many of the same dimensions of the market supported a vertical integration strategy. Evidence on the performance of health systems after integration revealed mixed results. Because the market continues to be turbulent, hybrid non-owned integration in the form of alliances have increased to over 40% of urban hospitals. The third purpose of the study was to examine the application of vertical integration in health care and evaluate the effects. The case studied was an alliance formed between a community hospital and a tertiary medical center to facilitate vertical integration of oncology services while maintaining effectiveness and preserving access. The economic benefits for 1934 patients were evaluated in the delivery system before and after integration with a more detailed economic analysis of breast, lung, colon/rectal, and non-malignant cases. A regression analysis confirmed the relationship between the independent variables of age, sex, location of services, race, stage of disease, and diagnosis, and the dependent variable, cost. The results of the basic regression model, as well as the regression with first-order interaction terms, were statistically significant. The study shows that vertical integration at an intermediate health care system level has economic benefits. If the pre-integration oncology group had been treated in the post-integration model, the expected cost savings from integration would be 31.5%. Quality indicators used were access to health care services and research treatment protocols, and access was preserved in the integrated model. Using survival as a direct quality outcome measure, the survival of lung cancer patients was statistically the same before and after integration. ^

Para que no pase con Potrerillos lo que pasó con El Carrizal

El embalse Carrizal es una obra realizada sobre el río Tunuyán, que nace a la vida del oasis en el año 1971, acompañada de importantes proyectos de desarrollo económico e integración territorial. La inexistencia de una legislación adecuada a las necesidades generadas por esta infraestructura, la ineficiencia en su administración y la desconexión puesta de manifiesto entre el embalse y su zona de influencia, son las causas que provocan la falta de equipamiento turístico-recreativo adecuado y el aprovechamiento óptimo del recurso agua. En el caso de Potrerillos , se diferencian 3 zonas en donde el impacto de la presa puede producir cambios importantes, potenciando su desarrollo o provocando la aparición de externalidades negativas y mayores gastos de los previstos. Estas son : la márgenes del embalse, en donde se espera, al igual que en El Carrizal, el desarrollo de una serie de proyectos turísticos y recreativos; la zona de influencia de la Villa Potrerillos y la del Alto Potrerillos y la zona de riego del río Mendoza. La inserción de este tipo de obra debe ser planificada, y las políticas y acciones a implementar deben surgir de un análisis profundo de su realidad, de las limitaciones y potencialidades naturales como también de las necesidades y requerimientos de todos los agentes que participan en la construcción del nuevo ecosistema.