The relationship between selected standardized test scores and performance in advanced placement math and science exams: Analyzing the differential effectiveness of scores for course identification and placement

There is a national need to increase the STEM-related workforce. Among factors leading towards STEM careers include the number of advanced high school mathematics and science courses students complete. Florida's enrollment patterns in STEM-related Advanced Placement (AP) courses, however, reveal that only a small percentage of students enroll into these classes. Therefore, screening tools are needed to find more students for these courses, who are academically ready, yet have not been identified. The purpose of this study was to investigate the extent to which scores from a national standardized test, Preliminary Scholastic Assessment Test/ National Merit Qualifying Test (PSAT/NMSQT), in conjunction with and compared to a state-mandated standardized test, Florida Comprehensive Assessment Test (FCAT), are related to selected AP exam performance in Seminole County Public Schools. An ex post facto correlational study was conducted using 6,189 student records from the 2010 - 2012 academic years. Multiple regression analyses using simultaneous Full Model testing showed differential moderate to strong relationships between scores in eight of the nine AP courses (i.e., Biology, Environmental Science, Chemistry, Physics B, Physics C Electrical, Physics C Mechanical, Statistics, Calculus AB and BC) examined. For example, the significant unique contribution to overall variance in AP scores was a linear combination of PSAT Math (M), Critical Reading (CR) and FCAT Reading (R) for Biology and Environmental Science. Moderate relationships for Chemistry included a linear combination of PSAT M, W (Writing) and FCAT M; a combination of FCAT M and PSAT M was most significantly associated with Calculus AB performance. These findings have implications for both research and practice. FCAT scores, in conjunction with PSAT scores, can potentially be used for specific STEM-related AP courses, as part of a systematic approach towards AP course identification and placement. For courses with moderate to strong relationships, validation studies and development of expectancy tables, which estimate the probability of successful performance on these AP exams, are recommended. Also, findings established a need to examine other related research issues including, but not limited to, extensive longitudinal studies and analyses of other available or prospective standardized test scores.

Product and Process Innovation: Antecedents and Performance outcomes in small IT firms in India

Innovation is a strategic necessity for the survival of today’s organizations. The wide recognition of innovation as a competitive necessity, particularly in dynamic market environments, makes it an evergreen domain for research. This dissertation deals with innovation in small Information Technology (IT) firms in India. The IT industry in India has been a phenomenal success story of the last three decades, and is today facing a crucial phase in its history characterized by the need for fundamental changes in strategies, driven by innovation. This study, while motivated by the dynamics of changing times, importantly addresses the research gap on small firm innovation in Indian IT.This study addresses three main objectives: (a) drivers of innovation in small IT firms in India (b) impact of innovation on firm performance (c) variation in the extent of innovation adoption in small firms. Product and process innovation were identified as the two most contextually relevant types of innovation for small IT firms. The antecedents of innovation were identified as Intellectual Capital, Creative Capability, Top Management Support, Organization Learning Capability, Customer Involvement, External Networking and Employee Involvement.Survey method was adopted for data collection and the study unit was the firm. Surveys were conducted in 2014 across five South Indian cities. Small firm was defined as one with 10-499 employees. Responses from 205 firms were chosen for analysis. Rigorous statistical analysis was done to generate meaningful insights. The set of drivers of product innovation (Intellectual Capital, Creative Capability, Top Management Support, Customer Involvement, External Networking, and Employee Involvement)were different from that of process innovation (Creative Capability, Organization Learning Capability, External Networking, and Employee Involvement). Both product and process innovation had strong impact on firm performance. It was found that firms that adopted a combination of product innovation and process innovation had the highest levels of firm performance. Product innovation and process innovation fully mediated the relationship between all the seven antecedents and firm performance The results of this study have several important theoretical and practical implications. To the best of the researcher’s knowledge, this is the first time that an empirical study of firm level innovation of this kind has been undertaken in India. A measurement model for product and process innovation was developed, and the drivers of innovation were established statistically. Customer Involvement, External Networking and Employee Involvement are elements of Open Innovation, and all three had strong association with product innovation, and the latter twohad strong association with process innovation. The results showed that proclivity for Open Innovation is healthy in the Indian context. Practical implications have been outlined along how firms can organize themselves for innovation, the human talent for innovation, the right culture for innovation and for open innovation. While some specific examples of possible future studies have been recommended, the researcher believes that the study provides numerous opportunities to further this line of enquiry.

'Producing the Scene': the Evolution of the Director in British Theatre 1900-50

The role of the director as the individual who harnesses and controls resources to shape the theatrical product to a personal artistic vision, begins to emerge in British theatre in the early years of the twentieth century. What distinguishes the role from that of the actor-manager who had led the profession since the seventeenth century, is that it separates off from the leading actor in performance. The power and authority of the director (or producer as he or she tended to be known initially) is exercised in the pre-performance stage. In the first half of the century there were still old-style actor-managers—Donald Wolfit is a prime example—and many of the new directors had begun their careers as actors and some continued to act their in their own productions. But the perception of the function of the director began to change radically. In part this was linked to the early attempts to create a new model of producing company or ‘repertory’ theatre which required a different set of administrative as well as artistic skills to tackle the challenge of a short-run system of multiple play production. This became especially important in the developing network of regional repertory theatres which were established as autonomous, locally-specific institutions predicated on policies opposed to the dominant commercial ethos. The best-known of the early directors, most notably H.Granville Barker, confined their radical experiments to short-lived metropolitan experiments, or, as in the case of Terence Gray and J.B.Fagan, operated within the influential Oxbridge nexus. Others such as H.K.Ayliff, Herbert Prentice, William Armstrong and William Bridges-Adams remain comparatively obscure because of their long-term ‘provincial’ connections or, as in the case of Nugent Monck and Edy Craig because their creativity was largely channelled through amateur actors. This chapter will explore the evolving role of the director as both a necessary functionary and an artistic innovator within the changing structures of British theatre.

The impact of mindfulness on the wellbeing and performance of educators: A systematic review of the empirical literature

Given the potentially demanding nature of teaching, efforts are underway to develop practices that can improve the wellbeing of educators, including interventions based on mindfulness meditation. We performed systematic review of empirical studies featuring analyses of mindfulness in teaching contexts. Databases were reviewed from the start of records to January 2016. Eligibility criteria included empirical analyses of mindfulness and wellbeing outcomes acquired in relation to practice. A total of 19 papers met the eligibility criteria and were included in the systematic review, consisting of a total 1,981 participants. Studies were principally examined for outcomes such as burnout, anxiety, depression and stress, as well as more positive wellbeing measures (e.g., life satisfaction). The systematic review revealed that mindfulness was generally associated with positive outcomes in relation to most measures. However, the quality of the studies was inconsistent, and so further research is needed, particularly involving high-quality randomised control trials.

Electrical and optical studies on carbon nanotube arrays

Single-walled carbon nanotubes (SWNTs) have been studied as a prominent class of high performance electronic materials for next generation electronics. Their geometry dependent electronic structure, ballistic transport and low power dissipation due to quasi one dimensional transport, and their capability of carrying high current densities are some of the main reasons for the optimistic expectations on SWNTs. However, device applications of individual SWNTs have been hindered by uncontrolled variations in characteristics and lack of scalable methods to integrate SWNTs into electronic devices. One relatively new direction in SWNT electronics, which avoids these issues, is using arrays of SWNTs, where the ensemble average may provide uniformity from device to device, and this new breed of electronic material can be integrated into electronic devices in a scalable fashion. This dissertation describes (1) methods for characterization of SWNT arrays, (2) how the electrical transport in these two-dimensional arrays depend on length scales and spatial anisotropy, (3) the interaction of aligned SWNTs with the underlying substrate, and (4) methods for scalable integration of SWNT arrays into electronic devices. The electrical characterization of SWNT arrays have been realized by polymer electrolyte-gated SWNT thin film transistors (TFTs). Polymer electrolyte-gating addresses many technical difficulties inherent to electrical characterization by gating through oxide-dielectrics. Having shown polymer electrolyte-gating can be successfully applied on SWNT arrays, we have studied the length scaling dependence of electrical transport in SWNT arrays. Ultrathin films formed by sub-monolayer surface coverage of SWNT arrays are very interesting systems in terms of the physics of two-dimensional electronic transport. We have observed that they behave qualitatively different than the classical conducting films, which obey the Ohm’s law. The resistance of an ultrathin film of SWNT arrays is indeed non-linear with the length of the film, across which the transport occurs. More interestingly, a transition between conducting and insulating states is observed at a critical surface coverage, which is called percolation limit. The surface coverage of conducting SWNTs can be manipulated by turning on and off the semiconductors in the SWNT array, leading to the operation principle of SWNT TFTs. The percolation limit depends also on the length and the spatial orientation of SWNTs. We have also observed that the percolation limit increases abruptly for aligned arrays of SWNTs, which are grown on single crystal quartz substrates. In this dissertation, we also compare our experimental results with a two-dimensional stick network model, which gives a good qualitative picture of the electrical transport in SWNT arrays in terms of surface coverage, length scaling, and spatial orientation, and briefly discuss the validity of this model. However, the electronic properties of SWNT arrays are not only determined by geometrical arguments. The contact resistances at the nanotube-nanotube and nanotube-electrode (bulk metal) interfaces, and interactions with the local chemical groups and the underlying substrates are among other issues related to the electronic transport in SWNT arrays. Different aspects of these factors have been studied in detail by many groups. In fact, I have also included a brief discussion about electron injection onto semiconducting SWNTs by polymer dopants. On the other hand, we have compared the substrate-SWNT interactions for isotropic (in two dimensions) arrays of SWNTs grown on Si/SiO2 substrates and horizontally (on substrate) aligned arrays of SWNTs grown on single crystal quartz substrates. The anisotropic interactions associated with the quartz lattice between quartz and SWNTs that allow near perfect horizontal alignment on substrate along a particular crystallographic direction is examined by Raman spectroscopy, and shown to lead to uniaxial compressive strain in as-grown SWNTs on single crystal quartz. This is the first experimental demonstration of the hard-to-achieve uniaxial compression of SWNTs. Temperature dependence of Raman G-band spectra along the length of individual nanotubes reveals that the compressive strain is non-uniform and can be larger than 1% locally at room temperature. Effects of device fabrication steps on the non-uniform strain are also examined and implications on electrical performance are discussed. Based on our findings, there are discussions about device performances and designs included in this dissertation. The channel length dependences of device mobilities and on/off ratios are included for SWNT TFTs. Time response of polymer-electrolyte gated SWNT TFTs has been measured to be ~300 Hz, and a proof-of-concept logic inverter has been fabricated by using polymer electrolyte gated SWNT TFTs for macroelectronic applications. Finally, I dedicated a chapter on scalable device designs based on aligned arrays of SWNTs, including a design for SWNT memory devices.

Concentrating solar power + desalination plants (CSP+D): models and performance analysis

Tese submetida à Universidade de Lisboa, Instituto Superior Técnico e aprovada em provas públicas para a obtenção do Grau de Doutor em Sistemas Sustentáveis de Energia.

Troilus and Cressida - A Scenic Design

The purpose of this thesis is to provide research, supporting paperwork, production photographs, and other materials that document the scenic design process for the production of William Shakespeare’s Troilus & Cressida by the University of Maryland – College Park, School of Theater, Dance, and Performance Studies. This thesis contains the following: scenic research images collected to express period, location, and emotional/intellectual landscapes to the production team; preliminary sketches; photographs of the ¼” scale model; a full set of drafting plates and paint elevations used to communicate the design to the technical director and paint charge; a unit list naming each scenic element; a props list and research book to detail each hand prop, furniture piece and consumable to the prop master; and, lastly, archival production photographs to document the completed design.

Corporate governance : value creation and performance in credit unions

In this study, we examine the relationship between good corporate governance practices and the creation of value/performance of credit unions from 2010 to 2012. The objective was to create and validate a corporate governance index for credit unions, and to then analyse the relationship between good governance practices and the creation of value/performance. The problem question is: do good corporate governance practices provide value creation for credit unions? The research started by creating indices from factor analysis to identify latent dependent variables related to value creation and performance; next indices were created from the principal component analysis for the creation of independent latent variables related to corporate governance. Finally, based on panel data from regression models, the influence of the variables and indices related to corporate governance on the indices of value creation and performance was verified. Based on the research, it became evident that the Corporate Governance Index (IGC) is mainly impacted by Executive Management, with 40.31% of the IGC value, followed by the Representation and Participation dimension, with 34.07% of the IGC value. The contribution for academics was the creation of the Corporate Governance Index (IGC) applied for credit unions. As for the contribution to the system of credit unions, the highlight was the effectiveness of the mechanisms for economic-financial and asset management adopted by BACEN, credit unions and OCEMG.

Experimental and modeling studies of forced convection storage and drying systems for sweet potatoes

Sweet potato is an important strategic agricultural crop grown in many countries around the world. The roots and aerial vine components of the crop are used for both human consumption and, to some extent as a cheap source of animal feed. In spite of its economic value and growing contribution to health and nutrition, harvested sweet potato roots and aerial vine components has limited shelf-life and is easily susceptible to post-harvest losses. Although post-harvest losses of both sweet potato roots and aerial vine components is significant, there is no information available that will support the design and development of appropriate storage and preservation systems. In this context, the present study was initiated to improve scientific knowledge about sweet potato post-harvest handling. Additionally, the study also seeks to develop a PV ventilated mud storehouse for storage of sweet potato roots under tropical conditions. In study one, airflow resistance of sweet potato aerial vine components was investigated. The influence of different operating parameters such as airflow rate, moisture content and bulk depth at different levels on airflow resistance was analyzed. All the operating parameters were observed to have significant (P < 0.01) effect on airflow resistance. Prediction models were developed and were found to adequately describe the experimental pressure drop data. In study two, the resistance of airflow through unwashed and clean sweet potato roots was investigated. The effect of sweet potato roots shape factor, surface roughness, orientation to airflow, and presence of soil fraction on airflow resistance was also assessed. The pressure drop through unwashed and clean sweet potato roots was observed to increase with higher airflow, bed depth, root grade composition, and presence of soil fraction. The physical properties of the roots were incorporated into a modified Ergun model and compared with a modified Shedd’s model. The modified Ergun model provided the best fit to the experimental data when compared with the modified Shedd’s model. In study three, the effect of sweet potato root size (medium and large), different air velocity and temperature on the cooling/or heating rate and time of individual sweet potato roots were investigated. Also, a simulation model which is based on the fundamental solution of the transient equations was proposed for estimating the cooling and heating time at the centre of sweet potato roots. The results showed that increasing air velocity during cooling and heating significantly (P < 0.05) affects the cooling and heating times. Furthermore, the cooling and heating times were significantly different (P < 0.05) among medium and large size sweet potato roots. Comparison of the simulation results with experimental data confirmed that the transient simulation model can be used to accurately estimate the cooling and heating times of whole sweet potato roots under forced convection conditions. In study four, the performance of charcoal evaporative cooling pad configurations for integration into sweet potato roots storage systems was investigated. The experiments were carried out at different levels of air velocity, water flow rates, and three pad configurations: single layer pad (SLP), double layers pad (DLP) and triple layers pad (TLP) made out of small and large size charcoal particles. The results showed that higher air velocity has tremendous effect on pressure drop. Increasing the water flow rate above the range tested had no practical benefits in terms of cooling. It was observed that DLP and TLD configurations with larger wet surface area for both types of pads provided high cooling efficiencies. In study five, CFD technique in the ANSYS Fluent software was used to simulate airflow distribution in a low-cost mud storehouse. By theoretically investigating different geometries of air inlet, plenum chamber, and outlet as well as its placement using ANSYS Fluent software, an acceptable geometry with uniform air distribution was selected and constructed. Experimental measurements validated the selected design. In study six, the performance of the developed PV ventilated system was investigated. Field measurements showed satisfactory results of the directly coupled PV ventilated system. Furthermore, the option of integrating a low-cost evaporative cooling system into the mud storage structure was also investigated. The results showed a reduction of ambient temperature inside the mud storehouse while relative humidity was enhanced. The ability of the developed storage system to provide and maintain airflow, temperature and relative humidity which are the key parameters for shelf-life extension of sweet potato roots highlight its ability to reduce post-harvest losses at the farmer level, particularly under tropical climate conditions.

The dark and bright side of remote work: social isolation, concentration, and performance of remote workers

This dissertation, comprised of three separate studies, focuses on the relationship between remote work adoption and employee job performance, analyzing employee social isolation and job concentration as the main mediators of this relationship. It also examines the impact of concern about COVID-19 and emotional stability as moderators of these relationships. Using a survey-based method in an emergency homeworking context, the first study found that social isolation had a negative effect on remote work productivity and satisfaction, and that COVID-19 concerns affected this relationship differently for individuals with high and low levels of concern. The second study, a diary study analyzing hybrid workers, found a positive correlation between work from home (WFH) adoption and job performance through social isolation and job concentration, with emotional stability serving respectively as a buffer and booster in the relationships between WFH and the mediators. The third study, even in this case a diary study of hybrid workers, confirmed the benefits of work from home on job performance and the importance of job concentration as a mediator, while suggesting that social isolation may not be significant when studying employee job performance, but it is relevant for employee well-being. Although each study provides autonomously a discussion and research and practical implications, this dissertation also presents a general discussion on remote work and its psychological implications, highlighting areas for future research

Temporary teams learning and performance: the case of 3D printing technology in orthopaedic surgery

This dissertation contributes to the scholarly debate on temporary teams by exploring team interactions and boundaries.The fundamental challenge in temporary teams originates from temporary participation in the teams. First, as participants join the team for a short period of time, there is not enough time to build trust, share understanding, and have effective interactions. Consequently, team outputs and practices built on team interactions become vulnerable. Secondly, as team participants move on and off the teams, teams’ boundaries become blurred over time. It leads to uncertainty among team participants and leaders about who is/is not identified as a team member causing collective disagreement within the team. Focusing on the above mentioned challenges, we conducted this research in healthcare organisations since the use of temporary teams in healthcare and hospital setting is prevalent. In particular, we focused on orthopaedic teams that provide personalised treatments for patients using 3D printing technology. Qualitative and quantitative data were collected using interviews, observations, questionnaires and archival data at Rizzoli Orthopaedic Institute, Bologna, Italy. This study provides the following research outputs. The first is a conceptual study that explores temporary teams’ literature using bibliometric analysis and systematic literature review to highlight research gaps. The second paper qualitatively studies temporary relationships within the teams by collecting data using group interviews and observations. The results highlighted the role of short-term dyadic relationships as a ground to share and transfer knowledge at the team level. Moreover, hierarchical structure of the teams facilitates knowledge sharing by supporting dyadic relationships within and beyond the team meetings. The third paper investigates impact of blurred boundaries on temporary teams’ performance. Using quantitative data collected through questionnaires and archival data, we concluded that boundary blurring in terms of fluidity, overlap and dispersion differently impacts team performance at high and low levels of task complexity.

Genetic Breeding And Diversity Of The Genus Passiflora: Progress And Perspectives In Molecular And Genetic Studies.

Despite the ecological and economic importance of passion fruit (Passiflora spp.), molecular markers have only recently been utilized in genetic studies of this genus. In addition, both basic genetic researches related to population studies and pre-breeding programs of passion fruit remain scarce for most Passiflora species. Considering the number of Passiflora species and the increasing use of these species as a resource for ornamental, medicinal, and food purposes, the aims of this review are the following: (i) to present the current condition of the passion fruit crop; (ii) to quantify the applications and effects of using molecular markers in studies of Passiflora; (iii) to present the contributions of genetic engineering for passion fruit culture; and (iv) to discuss the progress and perspectives of this research. Thus, the present review aims to summarize and discuss the relationship between historical and current progress on the culture, breeding, and molecular genetics of passion fruit.

Hypobromous Acid, A Powerful Endogenous Electrophile: Experimental And Theoretical Studies.

Hypobromous acid (HOBr) is an inorganic acid produced by the oxidation of the bromide anion (Br(-)). The blood plasma level of Br(-) is more than 1,000-fold lower than that of chloride anion (Cl(-)). Consequently, the endogenous production of HOBr is also lower compared to hypochlorous acid (HOCl). Nevertheless, there is much evidence of the deleterious effects of HOBr. From these data, we hypothesized that the reactivity of HOBr could be better associated with its electrophilic strength. Our hypothesis was confirmed, since HOBr was significantly more reactive than HOCl when the oxidability of the studied compounds was not relevant. For instance: anisole (HOBr, k2=2.3×10(2)M(-1)s(-1), HOCl non-reactive); dansylglycine (HOBr, k2=7.3×10(6)M(-1)s(-1), HOCl, 5.2×10(2)M(-1)s(-1)); salicylic acid (HOBr, k2=4.0×10(4)M(-1)s(-1), non-reactive); 3-hydroxybenzoic acid (HOBr, k2=5.9×10(4)M(-1)s(-1), HOCl, k2=1.1×10(1)M(-1)s(-1)); uridine (HOBr, k2=1.3×10(3)M(-1)s(-1), HOCl non-reactive). The compounds 4-bromoanisole and 5-bromouridine were identified as the products of the reactions between HOBr and anisole or uridine, respectively, i.e. typical products of electrophilic substitutions. Together, these results show that, rather than an oxidant, HOBr is a powerful electrophilic reactant. This chemical property was theoretically confirmed by measuring the positive Mulliken and ChelpG charges upon bromine and chlorine. In conclusion, the high electrophilicity of HOBr could be behind its well-established deleterious effects. We propose that HOBr is the most powerful endogenous electrophile.

46,XX Male - Testicular Disorder of Sexual Differentiation (DSD): hormonal, molecular and cytogenetic studies

The XX male syndrome - Testicular Disorder of Sexual Differentiation (DSD) is a rare condition characterized by a spectrum of clinical presentations, ranging from ambiguous to normal male genitalia. We report hormonal, molecular and cytogenetic evaluations of a boy presenting with this syndrome. Examination of the genitalia at age of 16 months, showed: penis of 3.5 cm, proximal hypospadia and scrotal testes. Pelvic ultrasound did not demonstrate Mullerian duct structures. Karyotype was 46,XX. Gonadotrophin stimulation test yielded insufficient testosterone production. Gonadal biopsy showed seminiferous tubules without evidence of Leydig cells. Molecular studies revealed that SRY and TSPY genes and also DYZ3 sequences were absent. In addition, the lack of deletions or duplications of SOX9, NR5A1, WNT4 and NROB1 regions was verified. The infant was heterozygous for all microsatellites at the 9p region, including DMRT1 gene, investigated. Only 10% of the patients are SRY-negative and usually they have ambiguous genitalia, as the aforementioned patient. The incomplete masculinization suggests gain of function mutation in one or more genes downstream to SRY gene.

EPR and magnetic studies of a carboxylate-bridged dinuclear copper(II) compound: [cu2(flu)4(dmf)2]

We report magnetic and EPR (electron paramagnetic resonance) spectroscopy studies of [Cu2(flu)4(dmf)2] (flu = flufenamate and dmf = dimethylformamide), which has CuII ions in tetracarboxylate "paddle wheel" dinuclear units. Susceptibility measurements at 10 < T < 275 K allowed the evaluation of an antiferromagnetic intradinuclear exchange coupling J0 = -294 ± 5 cm-1 between CuII ions (Hex = "J0 S1·S2). EPR experiments at 300 K in powder and single-crystals at 9.5 and 34.4 GHz indicated g// = 2.373, g⊥ = 2.073 and zero field splitting parameters D = (-0.334 ± 0.001) cm"1 and E ca. 0. EPR signal intensity measurements at X-band in the range 4 < T < 295 K indicated that J0 = "283 ± 5 cm"1. A higher limit |J´| < 5×10-3 cm-1 for the interdinuclear exchange coupling between neighbor units at ca.14.24 Å was estimated from the angular variation of the single crystal spectra around the magic angles. The results are discussed in terms of the structure of the dinuclear unit and the bridges connecting CuII ions and compared with values reported for similar compounds.