Degradação fotoquímica de efluentes industriais contendo polipropileno e isoniazida

One of the main impacts to the environment is the water pollution, where the industrial sector is one of the main sources of this problem. In order to search for a solution, the industrial sector is looking forward to new technologies to treat its wastewaters with the goal to reuse the water in the own process. In this mode, the treatment presents a reduction in its costs with the water suply. One of these technologies that are getting more and more applications is the advanced oxidative processes (AOP´s). In this work two industrial wastewaters have been studied, i.e., containing polymers and pharmacus. In the case of the wastewaters with polymers the UV/H2O2 process has been applied with a systematic series of experiments, using irradiation from a mercury lamp and also solar. The following variables of the UV/H2O2 process for the polymers wastewaters have been studied systematically with the lamp reactor: mode of addition of hydrogen peroxide, temperature, time of reaction, hydrogen peroxide concentration and power of the lamp (80, 125, 250 and 400W). The results demonstrated to be satisfactory, obtaining rates of organic charge removal of 100% in 120 minutes of reaction. The studied variables for the experiments with solar irradiation using polymers wastewaters were only the time of reaction, the mode of addition and concentration of the hydrogen peroxide. The results with the solar irradiation demonstrated to be not satisfactory, reaching maximum of 22% of TOC removal in 240 minutes of reaction. This is in accordance with the fact that the solar source has only 5% of low UV irradiation. With respect to the photodegradation of the pharmacus wastewaters, the process UV/H2O2 and photo-Fenton have been applied. As a source of photons, in this case, a mercury UV lamp of 80 W has been used. The studied variables for the experiments with artificial irradiation with the pharmacus wastewaters were: initial concentration of the pollutant, concentration of Fe2+ and time of reaction. The results demonstrated a degree of degradation fairly satisfactory, showing a maximum conversion value of 46% in 120 minutes

Obtenção de emulsões asfálticas modificadas utilizando resíduos industriais

The main objective of this research was the development and characterization of conventional and modified cationic asphalt emulsions. The asphalt emulsions were developed by using the Petroleum Asphalt Cement (CAP 50-70) from Fazenda Belém (Petrobras -Aracati-Ce). The first step in this research was the development of the oil phase (asphalt + solvent) and the aqueous phase (water + emulsifying agent + acid + additives), separately. During the experiments for the obtaining of the conventional asphalt emulsion, the concentration of each constituent was evaluated. For the obtaining of the oil phase, kerosene was used as solvent at 15 and 20 wt.%. For the development of the aqueous phase, the emulsifying agent was used at 0.3 and 3.0 wt.%, whereas the acid and the additive were set at 0.3 wt.%. The percentage of asphalt in the asphalt emulsion was varied in 50, 55, and 60 wt.% and the heating temperature was set at 120 °C. The aqueous phase in the asphalt emulsion was varied from 16.4 to 34.1 wt.% and the heating temperature was set at 60 °C. After the obtaining of the oil and the aqueous phases, they were added at a colloidal mill, remaining under constant stirring and heating during 15 minutes. Each asphalt emulsion was evaluated considering: sieve analysis, Saybolt Furol viscosity, pH determination, settlement and storage stability, residue by evaporation, and penetration of residue. After the characterization of conventional emulsions, it was chosen the one that presented all properties in accordance with Brazilian specifications (DNER-EM 369/97). This emulsion was used for the development of all modified asphalt emulsions. Three polymeric industrial residues were used as modifier agents: one from a clothing button industry (cutouts of clothing buttons) and two from a footwear industry (cutouts of sandals and tennis shoes soles), all industries located at Rio Grande do Norte State (Brazil).The polymeric residues were added into the asphalt emulsion (1 to 6 wt.%) and the same characterization rehearsals were accomplished. After characterization, it were developed the cold-mix asphalts. It was used the Marshall mix design. For cold-mix asphalt using the conventional emulsion, it was used 5, 6 and 7 wt.% asphalt emulsion. The conventional mixtures presented stability values according Brazilian specification (DNER-369/97). For mixtures containing asphalt modified emulsions, it was observed that the best results were obtained with emulsions modified by button residue

Avaliação econômica dos incentivos fiscais e financeiros: uma análise das empresas industriais têxteis localizadas no Rio Grande do Norte, no período de 1999 a 2003

This study has as main objective to verify the effect of the tax and financial incentives granted by the brazilian states, specially in the reduction of ICMS on the investment decision of the entities, which in the last years led to the companies to decide new projects in based on the region that presented the better infrastructure beyond lesser tributary expense. For in such was made an economic valuation of the companies with focus in the beneficiary s optics using an adaptation of the Discounted Cash Flow method to measure the impact of the tax incentives in the value of the companies, this study selected the textile industry segment located in the State of Rio Grande do Norte, Brazil. The results indicated that such incentives created addition in the value of the companies, however the inexistence of incentives would not be enough to a negative decision of investment in the Rio Grande do Norte. The smallest difference between the value with and without incentive observed was 8.9%, and the biggest 31.7%, and the average of value aggregation with the tax incentives represented 18.9%

Revitalização do Rio Golandim (RN/Brasil) após décadas de contaminação por efluentes industriais e domésticos: este rio está recuperado?

Environmental pollution causes the loss of the quality of aquatic resources and also affects the health of human beings. The Golandim River is located in São Gonçalo do Amarante (RN Brazil) and had its water recovered seven years ago by measurements of parameters of the water s quality analyses physicochemistry, microbiological and heavy metals. However, it is not well established if this river is truly recovered, so this study provides a wide knowledge about the quality of these waters. Therefore, this investigation was accomplished by assays of ecotoxicology utilizing Ceriodaphnia dubia and of genotoxicity of the river s water using a biomarker Tradescantia Pallida (Trad-MCN). In set, it carried through a study of environmental perception through questionnaires that approached questions related to the profile of the interviewed one, knowledge on the environment and of the river Golandim with the community that lives in the neighborhoods of the river to diagnosis as they perceive the environment where live and its problems. The assays of the water had been carried out by collecting samples in three different sites of the Golandim River. They were collected between the periods of December 2010 (dry season in the northeast of Brazil) and July 2011 (rainy season in the northeast of). The analysis of the data allowed observing that the majority of the inhabitants are adult and presents a global vision of what it is part of the environment, the majority mentions the pollution of the river as one of the problems of the city, considering it serious. The ecotoxicology assay showed that there was not acute toxicity in all three samples collected. Meanwhile, all these three samples demonstrated significant chronic toxicity. The results from the Trad-MCN assay presented an increase in the frequency of micronucleus in one of the sites analyzed (S3) (p<0.01), in both seasons collected. On the other hand, the sites S1 and S2 did not presented a significant increase of micronucleus using this bioassay. The analyses of chemicals detected an increase in the levels of some metals, in different seasons and samples, which can be associates with some compounds found in urban and industrial areas. On the other hand, the physicochemistries parameters demonstrated that the Golandim River is recouped, when compared with the values presented at the CONAMA s legislation. However, these results indicate the presence of compounds capable of inducing chromosomal mutation in plants. On the other hand, the parameters physicistchemistries demonstrate that the river Golandim is if recouping, since when compares the values observed with the legislation of the CONAMA. All these results point to the fact that the Trad-MCN assay was sensitive and efficient biomarker for chromosomal instability and the C. dubia ecotoxicology assay was as though an efficient biomarker of toxicity of water s quality. The results from Trad-MCN associated with the ecotoxicology demonstrates that these analyses are important for environmental monitoring, once the first bioassay described above indicates alterations at the standards of cells and the other one indicates alterations at the standards of organisms. This study alerts for the necessity to carry out biological assays for the analyses of the water s quality

Caracterização dos óleos de algumas sementes de frutas como aproveitamento de resíduos industriais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de método espectrofotométrico para análise de paraformaldeído em saneantes comerciais e industriais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O perfil profissional do químico frente às novas realidades das organizações industriais

The objective of this paper is to reflect about the professional profile required of chemists by the chemical industry employing new management practices. This paper includes: a) historical synthesis of the appropriation of chemical knowledge by the industrial sector, b) a discussion of today's industrial organization and a comparison between the professional profile of chemists as expected by the taylorist and fordist standards of production and that expected in the context of flexibilization and globalization of production.

Cutinases fúngicas: propriedades e aplicações industriais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Benefícios e dificuldades da gestão ambiental com base na ISO 14001 em empresas industriais de São Paulo

O principal objetivo deste trabalho é verificar, por meio de uma pesquisa tipo survey, os benefícios e as dificuldades da adoção de Sistemas de Gestão Ambiental ISO 14001 em empresas industriais do Estado de São Paulo. Para tal, um questionário foi enviado para 194 empresas constantes da base de dados do INMETRO (Instituto Nacional de Metrologia, Normalização e Qualidade Industrial) e respondido por 69 delas, representando uma taxa de retorno de 35,36%. Duas hipóteses foram estabelecidas para realização do estudo: uma enunciando os potenciais benefícios e outra as dificuldades da gestão ambiental com base na norma NBR ISO 14001. Estas hipóteses foram parcialmente comprovadas. O artigo está estruturado da seguinte forma: introdução, sistema de gestão ambiental, norma NBR ISO 14001, método de pesquisa, apresentação e análise dos resultados, conclusão e referências bibliográficas.

Floculação de leveduras por Lactobacillus fermentum em processos industriais de fermentação alcoólica avaliada por técnica fotométrica

Na produção de álcool por fermentação com leveduras, a floculação manifesta-se como um mecanismo natural de agregação de células. Essa condição pode ser induzida por vários fatores, entre eles, a interação entre bactérias floculentas como Lactobacillus fermentum e as leveduras. Esse fato torna-se prejudicial para o processo, pois tanto nas unidades que se utilizam do sistema de recuperação de células por centrifugação, como nas que não o utilizam, ocorrem perdas excessivas de fermento, em conseqüência dos problemas operacionais decorrentes da floculação, comprometendo seriamente o desempenho industrial. No presente trabalho, avaliou-se a floculação em vinho proveniente de fermentação experimental, sob duas condições de pH de fermento tratado utilizadas como inóculo e temperaturas de fermentação, não se observando diferenças significativas entre elas. Com este estudo, pôde-se ainda avaliar a capacidade de dispersão dos flocos em três condições de pH no tratamento do fermento em fase industrial, mostrando diferenças altamente significativas entre elas. A maior capacidade de dispersão no tratamento do fermento é desejável para o controle da floculação industrial, permitindo a sua centrifugação, com conseqüente separação das bactérias contaminantes do fermento. Essas constatações tornaram-se possíveis pelo emprego da técnica usual de determinação da floculação por espectrofotometria, modificada pela desfloculação prévia das amostras de vinho e fermento, o que conferiu maior estabilidade nas leituras.

Relacoes entre a concentracao espacial dos ramos industriais 'motrizes' e o desenvolvimento regional: o caso do Estado de Sao Paulo.

This paper, having its conceptual basis in the Theory of Growth Poles, by F.Perroux, tests the effective existence of correlation between the spatial incidence and concentration of the 'propulsive' industrial groups and the industrial growth as a whole and the demographic increase. The selected case study was the state of Sao Paulo and data used was the 1970 census. As consequence of the techniques applied a industrial regionalization of the 'paulista' space was obtained, showing few areas of intense industrial concentration, especially of 'propulsive' groups, with multiple growth poles, and large areas with industrial rarefaction, with little or no poles.-after English summary

Competencia dinámica, distritos industriales y medidas locales

Incluye Bibliografía

Capacidad competitiva de las pequeñas empresas italianas: análisis crítico de la teoría de los distritos industriales en un marco de economía abierta

Incluye Bibliografía

Caracterização radiométrica de ácidos fosfóricos e seus produtos industriais

The addition of phosphoric acids and their (by)products became a common practice in areas like metal treatment, detergent production, water and effluent treatment, as well by food, beverage and pharmaceutical industries. The phosphoric acids exhibit different radionuclides activity concentration, being important to evaluate the implications for the human and animal health. The 238U concentration in almost all raw acid phosphoric are within the worldwide range and the mean exposure rate for the filtration cake is 10 nGy/h, which is mainly attributed to 40K. The results obtained for total and (bio)available uranium concentration in filtration cake indicate that only 40% is (bio)available for plants. The radionuclides present in phosphoric acid food grade and filtration cake do not raise their concentration in human food chain or soils to harmful levels, consequently, not offering hazard to the ecosystem and animal or human health.