Characterizations of the major coral diseases of the Philippines: Ulcerative white spot disease and novel growth anomalies of Porites

Coral reefs are in decline worldwide and coral disease is a significant contributing factor. However, etiologies of coral diseases are still not well understood. In contrast with the Caribbean, extremely little is known about coral diseases in the Philippines. In 2005, off Southeast Negros Island, Philippines, I investigated relationships between environmental parameters and prevalence of the two most common coral diseases, ulcerative white spot (UWS) and massive Porites growth anomalies (MPGAs). Samples were collected along a disease prevalence gradient 40.5 km long. Principal component analyses showed prevalence of MPGAs was positively correlated with water column nitrogen, organic carbon of surface sediments, and colony density. UWS was positively correlated with water column phosphorus. This is the first quantitative evidence linking anthropogenically-impacted water and sediment to a higher prevalence of these diseases. Histological and cytological alterations were investigated by comparing tissues from two distinct types of MPGA lesions (types 1 and 2) and healthy coral using light and electron microscopy. Skeletal abnormalities and sloughing, swelling, thinning, and loss of tissues in MPGAs resembled tissues exposed to bacterial or fungal toxins. Both lesion types had decreases in symbiotic zooxanthellae, which supply nutrients to corals. Notable alterations included migrations of chromophore cells (amoebocytes) (1) nocturnally to outer epithelia to perform wound-healing, including plugging gaps and secreting melanin in degraded tissues, and (2) diurnally to the interior of the tissue possibly to prevent shading zooxanthellae in order to maximize photosynthate production. Depletion of melanin (active in wound healing) in type 2 lesions suggested type 2 tissues were overtaxed and less stable. MPGAs contained an abundance of endolithic fungi and virus-like particles, which may result from higher nutrient levels and play roles in disease development. Swollen cells and mucus frequently blocked gastrovascular canals (GVCs) in MPGAs. Type 1 lesions appeared to compensate for impeded flow of wastes and nutrients through these canals with proliferation of new GVCs, which were responsible for the observed thickened tissues. In contrast, type 2 tissues were thin and more degraded. Dysplasia and putative neoplasia were also observed in MPGAs which may result from the tissue regeneration capacity being overwhelmed.

Age Differences among Female Sex Workers in the Philippines: Sexual Risk Negotiations and Perceived Manager Advice

Consistent condom use among high risk groups such as female sex workers (FSWs) remains low. Adolescent female sex workers are especially at higher risk for HIV/STI infections. However, few published studies have compared the sexual risk negotiations among adolescent, emerging adult, and older age groups or the extent a manager’s advice about condom use is associated with an FSW’s age. Of 1,388 female bar/spa workers surveyed in the southern Philippines, 791 FSW who traded sex in the past 6 months were included in multivariable logistic regression models. The oldest FSWs (aged 36–48) compared to adolescent FSWs (aged 14–17) were 3.3 times more likely to negotiate condoms when clients refused condom use. However, adolescent FSWs received more advice from their managers to convince clients to use condoms or else to refuse sex, compared to older FSWs. Both adolescent and the oldest FSWs had elevated sexually transmitted infections (STIs) and inconsistent condom use compared to other groups. Having a condom rule at the establishment was positively associated with condom negotiation. Factors such as age, the advice managers give to their workers, and the influence of a condom use rule at the establishment need to be considered when delivering HIV/STI prevention interventions.

Building Global Labor Solidarity Today: Learning from the KMU of the Philippines

New labor movements are currently emerging across the Global South. This is happening in countries as disparate as China, Egypt, and Iran. New developments are taking place within labor movements in places such as Colombia, Indonesia, Iraq, Mexico, Pakistan and Venezuela. Activists and leaders in these labor movements are seeking information from workers and unions around the world. However, many labor activists today know little or nothing about the last period of intense efforts to build international labor solidarity, the years 1978-2007. One of the key labor movements of this period, and which continues today, is the KMU Labor Center of the Philippines. It is this author’s contention that there is a lot unknown about the KMU that would help advance global labor solidarity today. This paper focuses specifically on the KMU’s development, and shares five things that have emerged from this author’s study of the KMU: a new type of trade unionism, new union organizations, an emphasis on rank and file education, building relations with sectoral organizations, and the need to build international labor solidarity.

Characterizations of the Major Coral Diseases of the Philippines: Ulcerative White Spot Disease and Novel Growth Anomalies of Porites

Coral reefs are in decline worldwide and coral disease is a significant contributing factor. However, etiologies of coral diseases are still not well understood. In contrast with the Caribbean, extremely little is known about coral diseases in the Philippines. In 2005, off Southeast Negros Island, Philippines, I investigated relationships between environmental parameters and prevalence of the two most common coral diseases, ulcerative white spot (UWS) and massive Porites growth anomalies (MPGAs). Samples were collected along a disease prevalence gradient 40.5 km long. Principal component analyses showed prevalence of MPGAs was positively correlated with water column nitrogen, organic carbon of surface sediments, and colony density. UWS was positively correlated with water column phosphorus. This is the first quantitative evidence linking anthropogenically-impacted water and sediment to a higher prevalence of these diseases. Histological and cytological alterations were investigated by comparing tissues from two distinct types of MPGA lesions (types 1 and 2) and healthy coral using light and electron microscopy. Skeletal abnormalities and sloughing, swelling, thinning, and loss of tissues in MPGAs resembled tissues exposed to bacterial or fungal toxins. Both lesion types had decreases in symbiotic zooxanthellae, which supply nutrients to corals. Notable alterations included migrations of chromophore cells (amoebocytes) (1) nocturnally to outer epithelia to perform wound-healing, including plugging gaps and secreting melanin in degraded tissues, and (2) diurnally to the interior of the tissue possibly to prevent shading zooxanthellae in order to maximize photosynthate production. Depletion of melanin (active in wound healing) in type 2 lesions suggested type 2 tissues were overtaxed and less stable. MPGAs contained an abundance of endolithic fungi and virus-like particles, which may result from higher nutrient levels and play roles in disease development. Swollen cells and mucus frequently blocked gastrovascular canals (GVCs) in MPGAs. Type 1 lesions appeared to compensate for impeded flow of wastes and nutrients through these canals with proliferation of new GVCs, which were responsible for the observed thickened tissues. In contrast, type 2 tissues were thin and more degraded. Dysplasia and putative neoplasia were also observed in MPGAs which may result from the tissue regeneration capacity being overwhelmed.

Habitat map of Danajon Bank, Philippines, derived from a high-spatial-resolution multi-spectral satellite image and georeferenced point intercept transect and spot-check survey field data, using an object-based image classification method

A mosaic of two WorldView-2 high resolution multispectral images (Acquisition dates: October 2010 and April 2012), in conjunction with field survey data, was used to create a habitat map of the Danajon Bank, Philippines (10°15'0'' N, 124°08'0'' E) using an object-based approach. To create the habitat map, we conducted benthic cover (seafloor) field surveys using two methods. Firstly, we undertook georeferenced point intercept transects (English et al., 1997). For ten sites we recorded habitat cover types at 1 m intervals on 10 m long transects (n= 2,070 points). Second, we conducted geo-referenced spot check surveys, by placing a viewing bucket in the water to estimate the percent cover benthic cover types (n = 2,357 points). Survey locations were chosen to cover a diverse and representative subset of habitats found in the Danajon Bank. The combination of methods was a compromise between the higher accuracy of point intercept transects and the larger sample area achievable through spot check surveys (Roelfsema and Phinn, 2008, doi:10.1117/12.804806). Object-based image analysis, using the field data as calibration data, was used to classify the image mosaic at each of the reef, geomorphic and benthic community levels. The benthic community level segregated the image into a total of 17 pure and mixed benthic classes.

The Philippines in the Aerospace Global Value Chain

This report uses the Duke CGGC Global Value Chain (GVC) framework to examine the role of the Philippines in the global aerospace industry and identify opportunities for the country to upgrade. The Philippines is a newcomer to the growing global aerospace manufacturing industry. Although the country has been host to a major flight controls manufacturer since 1985, the industry really only began to expand within the past five to ten years. During this recent period (2007-2014), the country has rapidly ramped up its aerospace manufacturing exports, reaching US$604 million in 2014 and more than tripling employment. The industry now employs 3,000 full time and 3,000 part time workers. Although still a very small player, accounting for less than 0.15% of the global industry, this incipient growth is promising. Both foreign firms and local suppliers that have established operations in the industry have already achieved some degree of upgrading within a short timeframe. These include expanding the product lines served, obtaining essential process certifications and upgrading beyond basic assembly operations to undertake additional manufacturing processes such as machining as well as initiating procurement and engineering functions in country.

The Philippines in the Automotive Global Value Chain

This report uses the Duke CGGC Global Value Chain (GVC) framework to examine the role of the Philippines in the global automotive industry and identify opportunities for upgrading. The country’s strength in the sector is in electrical and electronic automotive components, with approximately two-thirds of its US$3.98 billion exports in 2014 falling in one of these categories. The Philippines has a particularly strong foothold in wire harnesses, exports of which increased by 129% from 2007 to 2014 to allow it to become the world’s fourth largest global exporter. The prominence of the cluster affords the country a number of upgrading opportunities moving forward. Otherwise, the relatively small size of the domestic market has constrained the development of the industry, with local companies unable to generate the economies of scale necessary to compete in an increasingly consolidated global environment.

The Philippines in the Electronics & Electrical Global Value Chain

This report uses the Duke CGGC global value chain (GVC) framework to examine the role of the Philippines in the global electronics & electrical (E&E) industry and identify opportunities to upgrade. Electronics and electrical equipment have played an important role in the Philippine economy since the 1970s and form the foundation of the country’s export basket today. In 2014, these sectors accounted for 47% of total exports from the Philippines at US$28.8 billion, of which 41% was from electronics, and 6% from electrical products. From a global perspective, while the Philippines is not the leading exporter in any particular product category, it is known for its significant number of semiconductor assembly and test (A&T) facilities. The global economic crisis (2008-09), combined with the exit of Intel (2009), had a significant negative impact on electronics exports and, although steadily increasing, they have not yet rebounded to pre-crisis levels. Nonetheless, investment in the E&E industries has picked up since 2010; in the past five years, there have been 110 new investments in these sectors. Another positive sign is the low exit rate; with the exception of Intel, companies that have invested in the Philippines have stayed, with several operations dating back to the late 1970s and 1980s. These firms have not only stayed, but have continued to grow and expand in the country due to the quality of the workforce and satisfaction with the Philippine Economic Zone Authority (PEZA) environment. The growth of the industry has significantly benefited from foreign investment and close ties with Japanese firms.

The Philippines in the Chemical Global Value Chain

This report uses the Duke CGGC global value chain (GVC) framework to examine the role of the Philippines in the global chemical industry and identify opportunities for the country to upgrade. The Philippine chemicals sector is growing rapidly alongside economic expansion and a revival in manufacturing. By 2013, the chemicals sector as a whole accounted for 6.7% of GDP. Chemicals exports reached US$2.2 billion in 2014, approximately 3.5% of the country’s export basket. The sector’s expansion has outpaced both global and regional trade; with a compound annual growth rate of 13% since 2007, three times as fast as global exports, and twice as fast as Asian regional exports. Participation in the export market is based primarily on commodity products in the oleochemicals and petrochemicals sub-sectors. Within these segments, exports are driven by a small number of products, with the top 10 accounting for approximately threequarters of all exports. While the country is a small player in the global chemicals trade, accounting for just 0.2% of exports in 2014, it has generally been successful in carving out a presence in these niche products, and is one of the global leaders in most of its top product categories.

The Philippines in the Paper Global Value Chain

This report uses the Duke CGGC Global Value Chain (GVC) framework to examine the role of the Philippines in the global paper industry and identify opportunities for upgrading. The Philippines’ paper sector is a domestically oriented industry that provides significant indirect employment opportunities for wide swaths of workers as well as indirect exports for sectors such as electronics, food and beverage, and cosmetics. However, the country’s overall participation in the paper GVC is limited, with raw material constraints hindering export development. Abaca pulp production, a niche product category that uses the Manila hemp plant to generate specialized outputs such as tea bags and bank notes, is the country’s most dependable export, but even with the export value of abaca pulp approaching an all-time high in 2014, the overall paper industry only generated US$127 million in export revenue, 54th among 193 countries in the world.