Design, construction, and performance of a real-time holographic refractometry prototype for liquid analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Simple and versatile heterodyne whole-field interferometer for phase optics characterization

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Upconversion of infrared-to-visible light in Pr3+-Yb3+ codoped fluoroindate glass

Bright fluorescence in the visible range has been observed in Pr3+-Yb3+ doped fluoroindate glass under infrared diode laser irradiation. The mechanism which contributes for the upconversion emission is identified and the energy transfer rate between Pr3+-Yb3+ is obtained for different concentrations. © 1998 Elsevier Science B.V. All rights reserved.

Cooperative frequency upconversion in Yb3+-Tb3+ codoped fluoroindate glass

We report the observation of cooperative frequency upconversion in a fluoroindate glass. The experiments were performed by exciting Yb3+-Tb3+ codoped samples with an infrared diode laser. The process is monitored through the green fluorescence emitted by Tb3+ ions due to a cooperative energy transfer from a pair of excited Yb3+ ions. © 1998 Elsevier Science B.V. All rights reserved.

Lethal photosensitization in microbiological treatment of ligature-induced peri-implantitis: a preliminary study in dogs

This pilot study evaluated, by culture testing, the effectiveness of lethal photosensitization for the microbiological treatment of peri-implantitis in dogs. Experimental peri-implantitis was induced by ligature placement for 2 months. Following ligature removal, plaque control was instituted by scrubbing with 0.12% chlorhexidine daily for 12 months. Subsequently, mucoperiosteal flaps were elevated for scaling the implant surface. Microbial samples were obtained with paper points before and after treatment of implant surfaces by means of 100 microg/ml toluidine blue O (TBO,) and were exposed, for 80 s, to light with a wavelength of 685 nm from a 50 mW GaAlAs diode laser. The mean initial and final bacterial counts were 7.22 +/- 0.20 and 6.84 +/- 0.44 CFU/ml, respectively for TVC (P < 0.0001); 6.19 +/- 0.45 and 3.14 +/- 3.29 CFU/ml for P. intermedia/nigrescens (P = 0.001); 5.98 +/- 0.38 and 1.69 +/- 2.90 CFU/ml for Fusobacterium spp. (P = 0.001); and 6.07 +/- 0.22 to 1.69 +/- 2.94 CFU/ml for beta-hemolytic Streptococcus (P = 0.0039). It may be concluded that lethal photosensitization resulted in a reduction of the bacterial count. Complete elimination of bacteria was achieved in some samples.

Red, green, and blue upconversion luminescence in ytterbium-sensitized praseodymium-doped lead-cadmium-germanate glass

Blue, green, red, and near-infrared upconversion luminescence in the wavelength region of 480 - 740 nm in Pr3+/Yb3+-codoped lead-cadmium-germanate glass under 980 nm diode laser excitation, is presented. Upconversion emission peaks around 485, 530, 610, 645, and 725 nm which were ascribed to the 3P0 - 3HJ (J=4, 5, and 6), and 3P0 - 3FJ (J=2, and 3,4), transitions, respectively, were observed. The population of the praseodymium upper 3P0 emitting level was accomplished through a combination of ground-state absorption of Yb3+ ions at the 2F7/2, energy-transfer Yb3+(2F 5/2) Pr3+(3H4), and excited-state absorption of Pr3+ ions provoking the 1G4 - 3P0 transition. The dependence of the upconversion luminescence upon the Yb3+-concentration and diode laser power, is also examined, in order to subsidize the proposed upconversion excitation mechanism.

An in vitro thermal analysis during different light-activated hydrogen peroxide bleaching

This study measured the critical temperature reaching time and also the variation of temperature in the surface of the cervical region and within the pulp chamber of human teeth submitted to dental bleaching using 35% hydrogen peroxide gel activated by three different light sources. The samples were randomly divided into 3 groups (n = 15), according to the catalyst light source: Halogen Light (HL), High Intensity Diode Laser (DL), and Light Emmited Diode (LED). The results of temperature variation were submitted to the analysis of variance and Tukey test with p < 0.05. The temperature increase (mean value and standard deviation) inside the pulp chamber for the HL group was 6.8 ± 2.8°C; for the DL group was 15.3 ± 8.8°C; and for the LED group was 1.9 ± 1.0°C for. The temperature variation (mean value and standard deviation) on the tooth surface, for the group irradiated with HL was 9.1 ± 2.2°C; for the group irradiated with DL were 25.7 ± 18.9°C; and for the group irradiated with LED were 2.6 ± 1.4°C. The mean temperature increase values were significantly higher for the group irradiated with DL when compared with groups irradiated with HL and LED (p < 0.05). When applying the inferior limits of the interval of confidence of 95%, an application time of 38.7 s was found for HL group, and 4.4 s for DL group. The LED group did not achieve the critical temperatures for pulp or the periodontal, even when irradiated for 360 s. The HL and DL light sources may be used for dental bleaching for a short period of time. The LED source did not heat the target tissues significantly within the parameters used in this study. © 2010 Pleiades Publishing, Ltd.

Orange emission in Pr3+-doped fluoroindate glasses

We synthesize and study the properties of praseodymium doped fluoroindate glasses. Glass compositions with praseodymium molar concentrations up to 5% were obtained with good optical quality. Thermal, optical, and luminescence properties are investigated. Judd-Ofelt analysis is used to determine radiative lifetime and emission cross-section of the orange transition originating from the 3P0 level. We find that these glasses are good candidates for the realization of blue diode laser pumped orange lasers for quantum information processing applications. © 2012 Elsevier B.V. All rights reserved.

Dentin hypersensitivity after teeth bleaching with in-office systems. randomized clinical trial

Purpose: To comparatively and prospectively compare in a randomized clinical trial, dentin hypersensitivity after treatment with three in-office bleaching systems, based on hydrogen peroxide at different concentrations, with and without light source activation. Methods: 88 individuals were included according to inclusion and exclusion criteria. Subjects were randomly divided into the following three treatment groups: Group 1 was treated with three 15-minute applications of hydrogen peroxide at 15% with titanium dioxide (Lase Peroxide Lite) that was light-activated (Light Plus Whitening Lase) with five cycles of 1 minute and 30 seconds each cycle, giving a total treatment time of 45 minutes; Group 2 was treated with three 10-minute applications of hydrogen peroxide at 35% (Lase Peroxide Sensy), activated by light (LPWL) same activation cycles than Group 1, with a total treatment time of 30 minutes; Group 3 was treated with only one application for 45 minutes of hydrogen peroxide at 35% (Whitegold Office) without light activation. Each subject underwent one session of bleaching on the anterior teeth according to the manufacturers' instructions. Dentin sensitivity was recorded with a visual analogue scale (VAS) at baseline, immediately after, and at 7 and 30 days after treatment using a stimulus of an evaporative blowing triple syringe for 3 seconds on the upper central incisors from a distance of 1 cm. A Kruskal-Wallis test followed by Mann-Whitney test was performed for statistical analysis. Results: All groups showed increased sensitivity immediately after treatment. Group 1 displayed less changes relative to baseline with no significant differences (P= 0.104). At 7 and 30 days after treatment, a comparison of VAS values indicated no significant differences between all groups (P= 0.598 and 0.489, respectively).

Production and characterization of Tm3+/Yb3+ codoped waveguides based on PbO-GeO2 thin films

Fabrication and optical characterization of Tm3+/Yb3+ codoped PbO-GeO2 (PGO) pedestal-type waveguides are investigated in this work. It is important to mention that, to the best of authors' knowledge, the use of PGO pedestal-type waveguide has not been studied before. PGO thin films codoped with Tm3+ and Yb3+ were obtained through RF magnetron sputtering technique. The pedestal profile was obtained using conventional optical lithography procedures, followed by plasma etching and sputtering deposition. The profile of Tm3+/Yb3+ codoped PGO waveguides was observed by means of Scanning Electron Microscopy (SEM) measurements. Also the infrared and infrared-to-visible frequency upconversion luminescences of Tm3+ ions were measured exciting the samples with a cw 980 nm diode laser. Propagation losses around 11 dB/cm and 9 dB/cm were obtained at 630 and 1050 nm, respectively, for waveguides in the 20-100 μm width range. Single-mode propagation was observed for waveguides width up to 12 μm and 7 μm, at 1050 nm and 630 nm, respectively; larger waveguides width provided multi-mode propagation. The present results corroborate the possibility of using Tm3+/Yb3+ codoped PGO thin films as active waveguide for photonic applications. © 2013 Elsevier B.V. All rights reserved.

Clareamento com peróxido de hidrogênio a 35% ativado por diversas fontes de energia: análise térmica e microdureza do esmalte

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ação de diferentes fotossensibilizadores na terapia fotodinâmica antimicrobiana

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação in vitro da fotopolimerização de bráquetes vestibulares e linguais com arco de plasma, led e luz halógena

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da laserterapia de baixa intensidade sobre a cicatrização de úlceras hansênicas: ensaio clínico randomizado

Úlcera neuropática é uma das sequei as mais estigmatizantes da hanseníase. Sua presença é bastante incapacitante para o indivíduo, podendo levar a deformação e/ou amputação do membro afetado. Diversas técnicas de tratamento têm sido utilizadas no manejo destas úlceras, no entanto, os resultados nem sempre são satisfatórios, ocasionando a existência de pessoas que convivem há vários anos com ferimentos crônicos. A laserterapia de baixa intensidade (LBI) tem sido utilizada em diversos países no tratamento de úlceras de difícil cicatrização, entretanto seus resultados são inconclusivos e muitos dos trabalhos publicados apresentam falhas metodológicas. O objetivo deste estudo foi avaliar o efeito da LBI sobre o processo de cicatrização de úlceras em pacientes hansenianos, em um teste clínico controlado e randomizado. O estudo foi realizado no ambulatório de curativos da Unidade de Referência Estadual em Dermatologia Sanitária do Pará - Marcello Candia, a partir de um levantamento clínico-epidemiológico para caracterização da população estudada, por meio de anamnese, identificação da localização das úlceras, registro fotográfico digital, avaliação da área das lesões utilizando o programa ImageTool 3.0, e medida da profundidade das úlceras de 51 pacientes, totalizando 97 lesões. A comorbidade mais frequente nesta população foi a hipertensão arterial sistêmica (13 casos). Em seguida, 25 sujeitos foram distribuídos aleatoriamente em dois grupos de estudo. O grupo controle (GC), formado por 12 pacientes (14 Úlceras) permaneceu recebendo o tratamento de rotina, composto por curativos simples diários, uso de sulfadiazina de prata 1 %, e orientações para autocuidados e prevenção de incapacidades. O grupo experimental (GE), formado por 13 sujeitos (17 úlceras), permaneceu recebendo o mesmo tratamento de rotina do GC mais a aplicação de LBI três vezes por semana, durante um período de 12 semanas. A LBI foi aplicada com um equipamento de laser diodo A1GaInP (660 nm), na dose de 2 J/cm² com a técnica de varredura sem contato no leito da lesão, e 4 J/ponto nas bordas da lesão com aplicações pontuais com contato. A densidade de potência foi de 1 W/cm². As variáveis estudadas foram: área da lesão em cm², profundidade em milímetros e escore PUSH. No GC a média da área das úlceras foi de 5,3 (±9.2) antes e 4,4 (± 8,5) depois do tratamento, a profundidade foi de 6,3 (± 5,4) antes e 5,4 (± 5.7) depois, o escore PUSH foi 9,7 (± 3,4) antes e 8,4 (± 5.3) depois. No GE a média da área das Úlceras foi de 4,2 (± 5,9) antes e 3,8 (± 5,7) depois do tratamento, a profundidade foi de 6.2 (± 5.1) antes e 4,1 (± 3,9) depois, o escore PUSH foi 9,6 (± 3,3) antes e 7,9 (± 5,3) depois. A análise estatística não evidenciou diferença significativa (p > 0,05) em nenhuma das variáveis estudadas antes e depois do tratamento. A LBI, dentro dos parâmetros utilizados neste estudo, não demonstrou benefícios adicionais para a cicatrização de úlceras em hansenianos. A diminuição do peso exercido sobre a área da lesão e o controle da pressão arterial são medidas importantes no manejo destas úlceras.