GFRP waste reinforced polymer mortars: a new waste management solution for GFRP scrap material

To date, glass fibre reinforced polymer (GFRP) waste recycling is very limited and restricted by thermoset nature of binder matrix and lack of economically viable enduse applications for the recyclates. In this study, efforts were made in order to recycle grinded GFRP waste proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, a mix of powdered and fibrous materials, were incorporated into polyester based mortars as fine aggregate and filler replacements, at different load contents (between 4% up to 12% of total mass) and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Test results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse in concrete-polymer composites.

PLSR Models for Mechanical Strengths of Concrete Composite Materials Reinforced with Pultrusion Wastes

In this paper, we present two Partial Least Squares Regression (PLSR) models for compressive and flexural strength responses of a concrete composite material reinforced with pultrusion wastes. The main objective is to characterize this cost-effective waste management solution for glass fiber reinforced polymer (GFRP) pultrusion wastes and end-of-life products that will lead, thereby, to a more sustainable composite materials industry. The experiments took into account formulations with the incorporation of three different weight contents of GFRP waste materials into polyester based mortars, as sand aggregate and filler replacements, two waste particle size grades and the incorporation of silane adhesion promoter into the polyester resin matrix in order to improve binder aggregates interfaces. The regression models were achieved for these data and two latent variables were identified as suitable, with a 95% confidence level. This technological option, for improving the quality of GFRP filled polymer mortars, is viable thus opening a door to selective recycling of GFRP waste and its use in the production of concrete-polymer based products. However, further and complementary studies will be necessary to confirm the technical and economic viability of the process.

An experimental study on recycling and reuse of pultruded composite material wastes

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remoulded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behavior over unmodified polyester based mortars, thus indicating the feasibility of the GFRP industrial waste reuse into concrete-polymer composite materials.

A case study undertaken recycling & reuse of glass fiber reinforced thermoset polumer wastes of composite materials industry

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: crosslinked nature of thermoset resins, which cannot be remoulded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behaviour over unmodified polyester based mortars, thus indicating the feasibility of the GFRP industrial waste reuse into concrete-polymer composite materials.

Caracterização física e química de fíleres para fabrico de misturas betuminosas

Mestrado em Engenharia Geotécnica e Geoambiente

A influência dos fileres no comportamento viscoso dos mastiques betuminosos

As estradas têm vindo a sofrer um aumento de importância, sendo necessário aplicar pavimentos com melhores características, assim foram desenvolvidos os mastiques betuminosos. Os mastiques são misturas de betume com filer, este material tem propriedades melhoradas em relação ao betume puro. O betume é um material viscoelástico, o que leva a que a viscosidade seja uma propriedade de vital importância estudar. A junção de fileres ao betume promove um aumento de viscosidade, levando a que esta propriedade reológica tenha ainda mais importância, principalmente porque a trabalhabilidade da mistura betuminosa fica comprometida quando a viscosidade não é a correta. Na realização desta dissertação foram realizados ensaios em mastiques betuminosos, com recurso ao viscosímetro rotativo de Brookfield. Os mastiques ensaiados são compostos com fileres de diferentes origens e com diferentes taxas de incorporação, e assim foram analisadas as diferenças obtidas nos valores da viscosidade dinâmica. Os resultados obtidos mostram que os mastiques, à temperatura de fabrico, têm um comportamento viscoso idêntico ao comportamento viscoso do betume puro. Apesar dos mastiques produzidos terem uma viscosidade maior que a do betume puro, o valor desta propriedade reológica tende a igualar ao valor do betume, este comportamento observa-se nas temperaturas mais elevadas. Quando se examinam os resultados dos mastiques produzidos com menor quantidade de filer, na generalidade, os valores da viscosidade obtidos são idênticos. Para taxas de incorporação maiores, os valores da viscosidade dinâmica dos mastiques produzidos são bastante mais altos e distintos. Levando a concluir que quanto maior a percentagem de filer no mastique, maior o valor da viscosidade e maior dispersão dos resultados obtidos, isto para os fileres e taxas de incorporação testadas.

Is Demodex really non-pathogenic?

Although usually considered a non-pathogenic parasite in parasitological textbooks, Demodex folliculorum has been implicated as a causative agent for some dermatological conditions, such as rosacea-like eruptions and some types of blepharitis. Several anecdotal reports have demonstrated unequivocal tissue damage directly related to the presence of the parasite. However, this seems to be exceedingly rare, in contrast with the marked prevalence of this infestation. We have had the opportunity to observe one of such cases. A 38-year-old woman presented with rosacea-like papular lesions in her right cheek. Histopathological examination revealed granulomatous dermal inflammation with a well-preserved mite phagocytized by a multinucleated giant cell. This finding may be taken as an evidence for the pathogenicity of the parasite, inasmuch as it does not explain how such a common parasite is able to produce such a rare disease.

Queimadura com Exposição Óssea dos Membros Inferiores: Reconstrução com Matriz de Regeneração Dérmica

Introdução: As soluções reconstrutivas das queimaduras dos membros inferiores com exposição óssea (transferência de tecidos vascularizados) e dos defeitos do escalpe, não susceptíveis de encerramento com retalhos locais (expansão tecidual), são complexas, morosas e, por vezes, inviáveis. O recurso a substitutos cutâneos biológicos, como a matriz de regeneração dérmica, constitui uma importante alternativa às soluções reconstrutivas tradicionais. Relato dos casos: Estudo retrospectivo de 246 doentes com queimaduras dos membros inferiores, admitidos na Unidade de Queimados/Serviço de Cirurgia Plástica do nosso Centro Hospitalar, entre Janeiro de 2007 e Dezembro de 2008. Os autores apresentam 2 casos clínicos com queimaduras bilaterais das pernas e com exposição óssea. Nos dois casos, realizou-se desbridamento tangencial e encerramento das áreas cruentas com um substituto cutâneo, a matriz de regeneração dérmica. Na 4ª semana após a aplicação da matriz, o componente externo da membrana bilaminar foi substituído por enxerto de pele parcial. Obteve-se cobertura estável das áreas cruentas, sem necessidade de procedimentos cirúrgicos adicionais. Conclusões: A utilização de substitutos dérmicos expande as opções reconstrutivas nos casos de queimaduras com exposição óssea dos membros inferiores. A utilização da matriz biológica permitiu a preservação dos membros nos dois pacientes. A matriz de regeneração dérmica possibilitou uma cobertura estável de estruturas vitais, sem necessidade de transferência ou expansão tecidual e com morbilidade mínima.

L. (L.) chagasi in aids and visceral leishmaniasis (kala-azar) co-infection

Concomitant skin lesions in visceral leishmaniasis (VL) or kala-azar are rare, being more common the description of post-kala-azar dermal leishmaniasis occurring post treatment of kala-azar. Skin lesions caused by Leishmania donovani are frequently seen in the aids-VL co-infection. In Brazil cutaneous or mucosal forms of tegumentary leishmaniasis concomitant with aids are more commonly registered. Here we present a case of aids-VL co-infection, with unusual cutaneous and digestive compromising attributed to L. (L.) chagasi, with special attention to ecthymatous aspect of the lesion, allied to the absence of parasite on the histological skin biopsy.

Susceptibility of Cebus apella monkey (Primates: Cebidae) to experimental Leishmania (L.) infantum chagasi-infection

In Amazonian Brazil, the Cebus apella monkey (Primates: Cebidae) has been associated with the enzootic cycle of Leishmania (V.) shawi, a dermotropic parasite causing American cutaneous leishmaniasis (ACL). It has also been successfully used as animal model for studying cutaneous leishmaniasis. In this work, there has been investigated its susceptibility to experimental Leishmania (L.) infantum chagasi-infection, the etiologic agent of American visceral leishmaniasis (AVL). There were used ten C. apella specimens, eight adult and two young, four males and six females, all born and raised in captivity. Two experimental infection protocols were performed: i) six monkeys were inoculated, intra-dermal via (ID), into the base of the tail with 2 x 10(6) promastigotes forms from the stationary phase culture medium; ii) other four monkeys were inoculated with 3 x 10(7) amastigotes forms from the visceral infection of infected hamsters by two different via: a) two by intravenous via (IV) and, b) other two by intra-peritoneal via (IP). The parameters of infection evaluation included: a) clinical: physical exam of abdomen, weigh and body temperature; b) parasitological: needle aspiration of the bone-marrow for searching of amastigotes (Giemsa-stained smears) and promastigotes forms (culture medium); c) immunological: Indirect fluorescence antibody test (IFAT) and, Delayed-type hypersensitivity (DTH). In the six monkeys ID inoculated (promastigotes forms) all parameters of infection evaluation were negative during the 12 months period of follow-up. Among the four monkeys inoculated with amastigotes forms, two IV inoculated showed the parasite in the bone-marrow from the first toward to the sixth month p.i. and following that they cleared the infection, whereas the other two IP inoculated were totally negative. These four monkeys showed specific IgG-antibody response since the third month p.i. (IP: 1/80 and IV: 1/320 IgG) toward to the 12th month (IP: 1/160 and IV: 1/5120). The DTH-conversion occurred in only one IV inoculated monkey with a strong (30 mm) skin reaction. Considering these results, we do not encourage the use of C. apella monkey as animal model for studying the AVL.

Modelos Teóricos de Difusão Dérmica: abordagens matemáticas e computacionais para terapias transdérmicas da Obesidade

É de senso comum que os nutrientes são fundamentais à vida e que a subnutrição leva à acumulação de gorduras que pode chegar a casos de obesidade, tendo como consequência inúmeras complicações de saúde. Diferentes estruturas neuroanatómicas do cérebro têm um papel essencial no comportamento digestivo. A ação de várias moléculas de sinalização (hormonas, neurotransmissores e neuropéptidos) resulta na regulação da ingestão de alimentos, sendo que, por exemplo, algumas hormonas podem aumentar a sensação de saciedade podendo diminuir o apetite e a ingestão calórica. A descoberta de hormonas envolvidas no balanço energético proporcionou novas oportunidades para desenvolver meios para o tratamento da obesidade. A transferência de medicação antiobesidade por via tópica ou transdérmica é um desafio pois a pele funciona como uma barreira natural e protetora. Sendo uma barreira com uma grande área de superfície e de fácil acessibilidade, a pele tem potencial interesse na libertação de fármacos específicos a cada terapia. Vários métodos têm sido estudados de modo a permitir um aumento da permeabilidade de moléculas terapêuticas para o interior da pele e através da pele. As biotecnologias transdérmicas são um campo de interesse cada vez maior, devido as aplicações dérmicas e farmacêuticas que lhes estão subjacentes. Existem vários modelos computacionais e matemáticos em uso que permite uma visão mais abrangente de puros dados experimentais e até mesmo permite a extrapolação prática de novas metodologias de difusão dérmica. Contudo, eles compreendem uma complexa variedade de teorias e suposições que atribuem a sua utilização para situações específicas. Este trabalho, primeiramente analisa, de forma extensiva, as várias metodologias teóricas para o estudo da difusão dérmica e sistematiza as suas características, realizando depois a fase prévia duma nova abordagem computacional para o estudo da difusão dérmica, que determina características microscópicas de moléculas capazes de provocar a perda de peso, tais como a Leptina e/ou os seus agonistas.

Case for Diagnosis

Blastic plasmacytoid dendritic cell tumor is a rare, highly aggressive systemic neoplasm for which effective therapies have not yet been established. We describe a 73-year-old man with multiple nodules and patches emerging on the trunk and limbs. Lesional skin biopsy revealed a plasmacytoid dendritic cell tumor with dense dermal infiltrate of tumor cells with blastoid features. No apparent systemic involvement was identified in the initial stage. The patient was treated with prednisone daily, with notorious improvement of the skin lesions, although no complete remission was obtained. During the six-month follow-up period, no disease progression was documented, but fatal systemic progression occurred after that period of time.

Conservative Treatment of Chondrodermatitis Nodularis Chronica Helicis with Topical Nitroglycerin

Background: Chondrodermatitis nodularis chronica helicis (CNCH) is a benign, painful, indurated inflammatory nodule arising on the pinna. Different treatment modalities have been used with varying efficacy rates. Despite lower efficacy, conservative methods are most desirable. Case reports: Three patients diagnosed with CNCH were treated with 0.4% topical nitroglycerin ointment, twice daily. These included two women and one man, aged 66, 86, and 60-years-old, respectively. Two painful nodules were located on the antihelix, and one on the helix. One patient had been previously treated with intralesional corticosteroids, and another with intralesional corticosteroids, CO2 laser and photodynamic therapy. All three patients experienced significant clinical and symptomatic improvement with topical nitroglycerin. No side effects were reported. Discussion: The etiology of CNCH is uncertain. Dermal and chondral ischemia arising from perichondrial arterial narrowing has been recently described as a possible cause for this benign condition, hence the potential of nitroglycerin as a smooth muscle relaxant and vasodilator. A previous report described significant improvement in twelve patients treated with 2% topical nitroglycerin. Conclusion: Topical nitroglycerin ointment appears to be a noninvasive alternative for the treatment of CNCH. A lower concentration (0.4%) may be as effective and with fewer side effects, but more studies are warranted.

Evaluation of a direct immunofluorescent antibody (difma) test using Leishmania genus - specific monoclonal antibody in the routine diagnosis of cutaneous leishmaniasis

A direct immunofluorescent antibody (DIFMA) test using a Leishmania genus- specific monoclonal antibody was evaluated in the routine diagnosis of cutaneous leishmaniasis (CL) in Ecuador. This test was compared with the standard diagnostic techniques of scrapings, culture and histology. Diagnostic samples were taken from a total of 90 active dermal ulcers from patients from areas of Ecuador known to be endemic for cutaneous leishmaniasis. DIFMA was positive in all lesions. It was shown to be significantly superior to standard diagnostic methods either alone or in combination. The sensitivity of DIFMA did not diminish with chronicity of lesions. This test proved to be extremely useful in the routine diagnosis of CL because it is highly sensitive, is easy to use and produces rapid results.

Viability of ceramic residues in lime-based mortars

3rd Historic Mortars Conference, 11-14 September 2013, Glasgow, Scotland