985 resultados para DIVISION-1 TREATMENT
Resumo:
Conventional Si complementary-metal-oxide-semiconductor (CMOS) scaling is fast approaching its limits. The extension of the logic device roadmap for future enhancements in transistor performance requires non-Si materials and new device architectures. III-V materials, due to their superior electron transport properties, are well poised to replace Si as the channel material beyond the 10nm technology node to mitigate the performance loss of Si transistors from further reductions in supply voltage to minimise power dissipation in logic circuits. However several key challenges, including a high quality dielectric/III-V gate stack, a low-resistance source/drain (S/D) technology, heterointegration onto a Si platform and a viable III-V p-metal-oxide-semiconductor field-effect-transistor (MOSFET), need to be addressed before III-Vs can be employed in CMOS. This Thesis specifically addressed the development and demonstration of planar III-V p-MOSFETs, to complement the n-MOSFET, thereby enabling an all III-V CMOS technology to be realised. This work explored the application of InGaAs and InGaSb material systems as the channel, in conjunction with Al2O3/metal gate stacks, for p-MOSFET development based on the buried-channel flatband device architecture. The body of work undertaken comprised material development, process module development and integration into a robust fabrication flow for the demonstration of p-channel devices. The parameter space in the design of the device layer structure, based around the III-V channel/barrier material options of Inx≥0.53Ga1-xAs/In0.52Al0.48As and Inx≥0.1Ga1-xSb/AlSb, was systematically examined to improve hole channel transport. A mobility of 433 cm2/Vs, the highest room temperature hole mobility of any InGaAs quantum-well channel reported to date, was obtained for the In0.85Ga0.15As (2.1% strain) structure. S/D ohmic contacts were developed based on thermally annealed Au/Zn/Au metallisation and validated using transmission line model test structures. The effects of metallisation thickness, diffusion barriers and de-oxidation conditions were examined. Contacts to InGaSb-channel structures were found to be sensitive to de-oxidation conditions. A fabrication process, based on a lithographically-aligned double ohmic patterning approach, was realised for deep submicron gate-to-source/drain gap (Lside) scaling to minimise the access resistance, thereby mitigating the effects of parasitic S/D series resistance on transistor performance. The developed process yielded gaps as small as 20nm. For high-k integration on GaSb, ex-situ ammonium sulphide ((NH4)2S) treatments, in the range 1%-22%, for 10min at 295K were systematically explored for improving the electrical properties of the Al2O3/GaSb interface. Electrical and physical characterisation indicated the 1% treatment to be most effective with interface trap densities in the range of 4 - 10×1012cm-2eV-1 in the lower half of the bandgap. An extended study, comprising additional immersion times at each sulphide concentration, was further undertaken to determine the surface roughness and the etching nature of the treatments on GaSb. A number of p-MOSFETs based on III-V-channels with the most promising hole transport and integration of the developed process modules were successfully demonstrated in this work. Although the non-inverted InGaAs-channel devices showed good current modulation and switch-off characteristics, several aspects of performance were non-ideal; depletion-mode operation, modest drive current (Id,sat=1.14mA/mm), double peaked transconductance (gm=1.06mS/mm), high subthreshold swing (SS=301mV/dec) and high on-resistance (Ron=845kΩ.μm). Despite demonstrating substantial improvement in the on-state metrics of Id,sat (11×), gm (5.5×) and Ron (5.6×), inverted devices did not switch-off. Scaling gate-to-source/drain gap (Lside) from 1μm down to 70nm improved Id,sat (72.4mA/mm) by a factor of 3.6 and gm (25.8mS/mm) by a factor of 4.1 in inverted InGaAs-channel devices. Well-controlled current modulation and good saturation behaviour was observed for InGaSb-channel devices. In the on-state In0.3Ga0.7Sb-channel (Id,sat=49.4mA/mm, gm=12.3mS/mm, Ron=31.7kΩ.μm) and In0.4Ga0.6Sb-channel (Id,sat=38mA/mm, gm=11.9mS/mm, Ron=73.5kΩ.μm) devices outperformed the InGaAs-channel devices. However the devices could not be switched off. These findings indicate that III-V p-MOSFETs based on InGaSb as opposed to InGaAs channels are more suited as the p-channel option for post-Si CMOS.
Resumo:
Soil tillage with chisel ploughing is the conventional soil management system in chestnut stands for fruit production in Northern Portugal. A study was developed to assess the effects of three soil management systems on in situ soil N mineralization dynamics, tree nutrition status and fruit productivity, in a 50-yr old chestnut stand. The treatments were: conventional tillage with a chisel ploughing twice a year (CT), no-tillage with rainfed improved pasture with leguminous and grasses plants (NIP), and no-tillage with spontaneous herbaceous vegetation - natural pasture (NP). The CT treatment showed a strong increase of the soil N mineral concentration following soil disturbance by tillage, but the cumulative net N mineralized along the year was significantly lower (51.8 kg ha-1) than in the NIP (85.1 kg ha-1) treatment. The NP treatment (65.9 kg ha-1) did not cause a reduction in the soil N mineralization when compared to the CT treatment. The mineralization rate (g mineralized N kg-1 total N) in 2004 was about 26, 30 and 38 in the treatments CT, NP and NIP, respectively. Treatments showed different soil N dynamics, the proportion of mineralized NO3--N being lower in the NP (10-48%) than in CT and NIP treatments (53-74%). Our study indicates that no-tillage systems improve the tree nutrition status and enhance productivity
Resumo:
Different levels of menthol as an anesthetic for dourado (Salminus brasiliensis) were evaluated in this study. Fish (n=32) with average weight of 194.13 +/- 9.06 g and total mean length of 25.30 +/- 0.90 cm were separated in four groups composed of 8 individuals. Each group was submitted to different menthol concentrations: 60, 90, 120 and 150 mg L(-1). Total induction time was analyzed by polynomial regression and other parameters by Tukey's test. All experimental fish exposed to different concentrations of menthol reached deep anesthesia stage without mortality. It was observed a negative linear effect (P<0.05) for total induction time. The longest recovery time (172.60 s) was observed for dourado treated with 120 mg. L(-1), which differed (P<0.05) from the 90 mg.L(-1) treatment (122.03 s). All levels evaluated in this study were safe and effective. A concentration of 60 mg L(-1) for dourado is suggested based on lower cost and adequate induction and recovery time responses.
Resumo:
Mode of access: Internet.
Resumo:
Mode of access: Internet.
Resumo:
Mode of access: Internet.
Resumo:
Excessive occlusal surface wear can result in occlusal disharmony, functional and esthetic impairment. As a therapeutic approach, conventional single crowns have been proposed, but this kind of treatment is complex, highly invasive and expensive. This case report describes the clinical outcomes of an alternative minimally invasive treatment based on direct adhesive-pin retained restorations. A 64-year-old woman with severely worn dentition, eating problems related to missing teeth and generalized tooth hypersensitivity was referred for treatment. Proper treatment planning based on the diagnostic wax-up simulation was used to guide the reconstruction of maxillary anterior teeth with direct composite resin over self-threading dentin pins. As the mandibular remaining teeth were extremely worn, a tooth-supported overdenture was installed. A stabilization splint was also used to protect the restorations. This treatment was a less expensive alternative to full-mouth rehabilitation with positive esthetic and functional outcomes after 1.5 years of follow-up.
Resumo:
Herpes simplex virus (HSV) is one of the most common viral infections of the human being. Although most of the seropositive persons do not manifest symptoms, infected individuals may present recurrent infections, characterized by cold sores. HSV-1 infection can result in potentially harmful complications in some patients, especially in those with compromised immunity. We report a clinical case of a patient with severe oral HSV-1 infection in the lower lip. The treatment of the lesions with the association of high-intensity (erbium-doped yttrium aluminum garnet, 2.94 mu m, 80 mJ/pulse, 2-4 Hz) and low-intensity (indium gallium aluminum phosphide, 660 nm, 3.8 J/cm(2), 10mW) lasers has not been reported in the literature. During treatment, no systemic or topical medication was used. Pain sensitivity was completely gone after the first irradiation with the low-intensity laser. During the healing process, lesions were traumatized twice, on the days 4 and 7. Even though the lesions were completely healed within 10 days.
Resumo:
To determine the ability of probiotic lactobacilli to improve the treatment of vulvovaginal candidiasis (VVC) using a randomized, double-blind and placebo-controlled trial. Fifty-five women diagnosed with VVC by vaginal discharge positive for Candida spp. (according to culture method) associated with at least one of the symptoms (itching and burning vaginal feeling, dyspareunia and dysuria), were treated with single dose of fluconazole (150 mg) supplemented every morning for the following 4 weeks with two placebo or two probiotic capsules (containing Lactobacillus rhamnosus GR-1 and Lactobacillus reuteri RC-14). At 4 weeks, the probiotic treated group showed significantly less vaginal discharge associated with any of the above mentioned symptoms (10.3%vs 34.6%; P = 0.03) and lower presence of yeast detected by culture (10.3%vs 38.5%; P = 0.014). This study has shown that probiotic lactobacilli can increase the effectiveness of an anti-fungal pharmaceutical agent in curing disease. This novel finding of probiotic lactobacilli augmenting the cure rate of yeast vaginitis, not only offers an alternative approach to a highly prevalent condition that adversely affects the quality of life of women around the world, but also raises the question of how this combination works.
Resumo:
The treatment of textile effluents by the conventional method based on activated sludge followed by a chlorination step is not usually an effective method to remove azo dyes, and can generate products more mutagenic than the untreated dyes. The present work evaluated the efficiency of conventional chlorination to remove the genotoxicity/mutagenicity of the azo dyes Disperse Red 1, Disperse Orange 1, and Disperse Red 13 from aqueous solutions. The comet and micronucleus assays with HepG2 cells and the Salmonella mutagenicity assay were used. The degradation of the dye molecules after the same treatment was also evaluated, using ultraviolet and visible absorption spectrum measurements (UV-vis), high performance liquid chromatography coupled to a diode-array detector (HPLC-DAD), and total organic carbon removal (TOC) analysis. The comet assay showed that the three dyes studied induced damage in the DNA of the HepG2 cells in a dose-dependent manner. After chlorination, these dyes remained genotoxic, although with a lower damage index (DI). The micronucleus test showed that the mutagenic activity of the dyes investigated was completely removed by chlorination, under the conditions tested. The Salmonella assay showed that chlorination reduced the mutagenicity of all three dyes in strain YG1041, but increased the mutagenicity of Disperse Red 1 and Disperse Orange 1 in strain TA98. With respect to chemical analysis, all the solutions showed rapid discoloration and a reduction in the absorbance bands characteristic of the chromophore group of each dye. However, the TOC was not completely removed, showing that chlorination of these dyes is not efficient in mineralizing them. It was concluded that conventional chlorination should be used with caution for the treatment of aqueous samples contaminated with azo dyes. (C) 2010 Elsevier B.V. All rights reserved.
Resumo:
Extraction of intracellular protein from Escherichia coli is traditionally achieved by mechanical disruption. A chemical treatment that destroys the integrity of the bacterial cell wall and could provide an alternative technique is examined in this study. Treatment with a combination of the chelating agent ethylenediaminetetraacetate (EDTA) (greater than 0.3 mM) and the chaotropic agent urea (6 M) is highly effective at releasing protein from uninduced E. coli. The 6 M urea in the presence of 3 mM EDTA can release cytoplasmic protein from both logarithmic-phase and stationary-phase E. coli cells at levels equivalent to mechanical disruption. The concentrations of the two chemical agents were the major variables affecting the maximum levels of protein release. Several minor variables and interactions were also identified. The kinetics of protein release is first order. For 2, 4, and 6 M urea with 3 mM EDTA, the time constant is approximately 2.5 min independent of urea concentration. Kinetics for 3 mM EDTA without urea is considerably slower, with a time constant of 12.3 min. (C) 1997 John Wiley & Sons, Inc.
Resumo:
The chemokine stromal-derived factor-1 alpha (SDF-1 alpha) and its receptor CXCR4 are critically involved in directional migration and homing of plasma cells in multiple myeloma. Here, we show that the expression of SDF-1 alpha and CXCR4 was significantly down-regulated in patients treated with thalidomide (n = 10) as compared to newly diagnosed MM patients (n = 31) and MM patients treated with other drugs (n = 38). SDF-1 alpha and CXCR4 expression was also significantly decreased in a RPMI 8226 cell line treated with 10 and 20 mu mol/L of thalidomide. Our findings indicate that thalidomide therapy induces down-regulation of CXCR4 and its ligand SDF-1 alpha in multiple myeloma. (c) 2008 Elsevier Ltd. All rights reserved.
Resumo:
Background Treatment with adjuvant trastuzumab for 1 year improves disease-free survival and overall survival in patients with human epidermal growth factor receptor 2 (HER2)-positive early breast cancer. We aimed to assess disease-free survival and overall survival after a median follow-up of 4 years for patients enrolled on the Herceptin Adjuvant (HERA) trial. Methods The HERA trial is an international, multicentre, randomised, open-label, phase 3 trial comparing treatment with trastuzumab for 1 and 2 years with observation after standard neoadjuvant, adjuvant chemotherapy, or both in patients with HER2-positive early breast cancer. The primary endpoint was disease-free survival. After a positive first interim analysis at a median follow-up of 1 year for the comparison of treatment with trastuzumab for 1 year with observation, event-free patients in the observation group were allowed to cross over to receive trastuzumab. We report trial outcomes for the 1-year trastuzumab and observation groups at a median follow-up of 48.4 months (IQR 42.0-56.5) and assess the effect of the extensive crossover to trastuzumab. Our analysis was by intention-to-treat. The HERA trial is registered with the European Clinical Trials Database, number 2005-002385-11. Findings The HERA trial population comprised 1698 patients randomly assigned to the observation group and 1703 to the 1-year trastuzumab group. Intention-to-treat analysis of disease-free survival showed a significant benefit in favour of patients in the 1-year trastuzumab group (4-year disease-free survival 78.6%) compared with the observation group (4-year disease-free survival 72.2%; hazard ratio [HR] 0.76; 95% CI 0.66-0.87; p<0.0001). Intention-to-treat analysis of overall survival showed no significant difference in the risk of death (4-year overall survival 89.3% vs 87.7%, respectively; HR 0.85; 95% CI 0.70-1.04; p=0.11). Overall, 885 patients (52%) of the 1698 patients in the observation group crossed over to receive trastuzumab, and began treatment at median 22.8 months (range 4.5-52.7) from randomisation. In a non-randomised comparison, patients in the selective-crossover cohort had fewer disease-free survival events than patients remaining in the observation group (adjusted HR 0.68; 95% CI 0.51-0.90; p=0.0077). Higher incidences of grade 3-4 and fatal adverse events were noted on 1-year trastuzumab than in the observation group. The most common grade 3 or 4 adverse events, each in less than 1% of patients, were congestive cardiac failure, hypertension, arthralgia, back pain, central-line infection, hot flush, headache, and diarrhoea. Interpretation Treatment with adjuvant trastuzumab for 1 year after chemotherapy is associated with significant clinical benefit at 4-year median follow-up. The substantial selective crossover of patients in the observation group to trastuzumab was associated with improved outcomes for this cohort.