Narrative innovations predict symptom improvement: Studying innovative moments in narrative therapy of depression

Objective:Innovative moments (IMs) are moments in the therapeutic dialog that constitute exceptions toward the client's problems. These narrative markers of meaning transformation are associated with change in different models of therapy and diverse diagnoses. Our goal is to test if IMs precede symptoms change, or, on the contrary, are a mere consequence of symptomatic 15 change. Method: For this purpose, IMs and symptomatology (Outcome Questionnaire-10.2) were assessed at every session in a sample of 10 cases of narrative therapy for depression. Hierarchical linear modeling was conducted to explore whether (i) IMs in a given session predict patients' symptoms in the following session and/or (ii) symptoms in a given session predict IMs in the next session. Results: Results suggested that IMs are better predictors of symptoms than the reverse. Conclusions: These results are discussed considering the contribution of meanings and narrative processes' changes to symptomatic improvement.

Removal of Erythrosine B dye from water effluents using crop waste pumpkin seed hulls as adsorbent

Erythrosine B is widely used for coloring in various applications, especially in the food industry, despite its already proved toxicity and carcinogenicity. The agrowaste pumpkin seed hulls were applied as potential adsorbent for the removal of Erythrosine from aqueous solutions. Adsorption mechanism and kinetics were analyzed for design purposes. The seed hulls were characterized by specific techniques before and after dye retention. It was found that the attachment of Erythrosine B molecules on adsorbent surface may be attributed to the interactions between carboxyl and/or carbonyl groups of both dye and agrowaste wall components. A univariate approach followed by a factorial design was applied to study and analyze the experimental results as well as to estimate the combined effects of the process factors on the removal efficiency and dye uptake. Adsorption mechanism may be predominantly due to intraparticle diffusion, dependent on pore size. The four equilibrium models applied fitted the data well; the maximum adsorption capacity for Erythrosine was 16.4 mg/g. The results showed that adsorbent is effective for Erythrosine B removal for a large concentration range in aqueous solutions (5400 mg/L) in batch systems.

Biotechnological approaches for yield improvement of anticancer alkaloids in the plant Catharanthus roseus

Dissertação de mestrado em Biologia Molecular, Biotecnologia e Bioempreendedorismo em Plantas

Citric acid production by Y. lipolytica W29 from crude glycerol: strain improvement by mutagenesis

[Excerpt] Citric acid, an important and versatile organic acid extensively used in several industries, is originally produced by Aspergillus niger in submerged fermentation from molasses [1]. However, Yarrowia lipolytica have been studied and demonstrate a great potential as citric acid producer from several carbon sources [1–5] including crude glycerol, a low cost byproduct from the biodiesel industry [6]. The simultaneous production of the isomer isocitric acid is the major problem in using this yeast in the citric acid production. (...)

Psychological approach to endometriosis: Women's pain experience and quality of life improvement

Endometriosis is a chronic condition affecting 10 to15% of women in childbearing age. Understanding the impact of this disease on women’s well-being is still a challenge, namely to intervene. Pain is the most current and troublesome symptom. Although medical treatments for pain relief are effective, recurrence rate remains significant, calling for a better understanding and development of new approaches for pain management. A group Cognitive Behavioral Therapy (CBT) for management of associated co-morbidities is suggested, paying special attention to Chronic Pelvic Pain (CPP). CBT design can be grounded on information collected from focus groups and a one-group exploratory trial. Evaluation of therapy effectiveness is possible to be performed by comparing group CBT to Usual Care (UC) and Support Group (SG) in a randomized controlled trial. Research in this area could represent an important step in providing a solution to the management of endometriosis and, to the best of our knowledge, the first national psychological approach for its understanding and treatment.

Improvement in left ventricular dysfunction after surgical correction of mitral regurgitation

OBJECTIVE: To evaluate whether left ventricular end-systolic (ESD) diameters £ 51mm in patients (pt) with severe chronic mitral regurgitation (MR) are predictors of a poor prognosis after mitral valve surgery (MVS). METHODS: Eleven pt (aged 36±13 years) were studied in the preoperative period (pre), median of 36 days; in the early postoperative period (post1), median of 9 days; and in the late postoperative period (post2), mean of 38.5±37.6 months. Clinical and echocardiographic data were gathered from each pt with MR and systolic diameter ³51mm (mean = 57±4mm) to evaluate the result of MVS. Ten patients were in NYHA Class III/IV. RESULTS: All but 2 pt improved in functional class. Two pt died from heart failure and infectious endocarditis 14 and 11 months, respectively, after valve replacement. According to ejection fraction (EF) in post2, we identified 2 groups: group 1 (n=6), whose EF decreased in post1, but increased in post2 (p=0.01) and group 2 (n=5), whose EF decreased progressively from post1 to post2 (p=0.10). All pt with symptoms lasting £ 48 months had improvement in EF in post2 (p=0.01). CONCLUSION: ESD ³51mm are not always associated with a poor prognosis after MVS in patients with MR. Symptoms lasting up to 48 months are associated with improvement in left ventricular function.

Estrategias para el mejoramiento de la producción de maní mediante la inoculación de microorganismos biofertilizantes y controladores de enfermedades fúngicas. Strategies to the Improvement of the peanut productivity through of inoculation with microorganism biofertilizers and controllers of fungal diseases.

El cultivo de maní es de gran importancia en la provincia de Córdoba. En los últimos años, la pérdida de rendimiento del cultivo en la región centro debido a la degradación de los suelos, la incidencia de enfermedades causadas por hongos y la erosión hídrica y eólica ha desplazado el área de siembra hacia el sur de la provincia. La hipótesis planteada en este proyecto es que la diversidad de bacterias que habitan la rizósfera y/o los tejidos de maní constituye una fuente para la selección de aquéllos que, por sus propiedades fisiológicas y metabólicas, permitan mejorar el rendimiento del cultivo, actuando como biocontroladores de fitopatógenos o biofertilizantes. Los objetivos propuestos son: 1) Evaluar y caracterizar la actividad antifúngica en una población previamente seleccionada de microorganismos del suelo del área manisera de Córdoba para su utilización en el desarrollo de prácticas sustentables tendientes a optimizar la producción de dicho cultivo mediante funciones biocontroladoras. 2) Seleccionar bacterias nativas nodulantes de maní competitivas y eficientes en la fijación y asimilación de nitrógeno en maní para ser utilizadas como un inoculante potencial. La metodología a utilizar consistirá en ensayos de interacción planta-microorganismos usando técnicas moleculares y bioquímicas. Los estudios sobre el conocimiento de la biodiversidad del suelo en el área manisera aportarán herramientas para una transición hacia una agricultura sustentable, generándose un catálogo de bacterias simbióticas y de vida libre que muestran actividad PGPR y que podrían ser empleadas como biofertilizantes o biocontroladoras de fitopatógenos. Ello podría constituir un importante impulso en la economía regional, la cual se basa principalmente en la explotación agrícola.

Mejoramiento del comportamiento térmico de sistemas de calentamiento de agua solares termosifónicos hechos con materiales no convencionales y con tanques de almacenamiento verticales y horizontales Performance improvement of solar thermosyphonic systems for water heating made of non conventional materials and using horizontal and vertical storage tanks

El objeto de estudio de este proyecto son los sistemas de calentamiento de agua mediante energía solar que funcionan termosifónicamente. En particular se tratará con dos diseños particulares generados por fabricantes de la Provincia de Córdoba y que han solicitado el asesoramiento del Grupo de Energía Solar (GES) para el mejoramiento de la performance térmica de dichos equipos. Se trata de dos sistemas que tienen materiales no tradicionales y se diferencian además por tener una distinta disposición del tanque de almacenamiento: uno es en forma vertical y el otro en forma horizontal. Basados en los resultados de un ensayo bajo norma internacional, donde se detectaron algunas puntos factibles de mejora, se propone en este proyecto el análisis en detalle de los equipos, para lo cual se les debe desarmar completos, para realizar un estudio analítico y experimental de los mismos con el objeto de hacer un planteo teórico-analítico del comportamiento de los mismos, con la implementación de propuestas de mejora y chequeo de los resultados. Se propone entonces como objetivo lograr un mejoramiento de la performance térmica de los citados equipos a partir de un estudio experimental y analítico. Asumiendo esta posibilidad de mejora, se plantea la hipótesis de que es posible representar el funcionamiento de estos equipos mediante modelos físico-matemáticos desarrollados a partir de ecuaciones y correlaciones conocidas y procesos a interpretar mediante resoluciones numéricas y softwares específicos de simulación. De esta manera, se plantea el despieze completo de los equipos para estudiar en detalle su estructura y conexiones internas y a partir de la geometría, dimensiones y propiedades termofísicas de materiales constructivos y fluidos de trabajo, realizar modelos físico-matemáticos que permitan realizar variaciones de propiedades y geometría y así buscar las mejores combinaciones que produzcan equipos más eficientes térmicamente. Los modelos físico-matemáticos serán codificados en lenguajes de alto nivel para poder luego de una validación de los modelos, correr simulaciones en un software de reconocimiento internacional que permite sumar dichos modelos mediante un protocolo de comunicación, haciendo que las poderosas prestaciones del software se puedan aplicar a nuestros modelos. Se complementará el estudio con un análisis exergético para identificar los puntos críticos en que se producen las pérdidas de oportunidad de aprovechar la energía disponible, para así analizar cómo solucionar los problemas en dichos puntos. Los materiales a utilizar serán los propios equipos provistos por los fabricantes, que serán modificados convenientemente para operarlos como prototipos Se espera obtener un conocimiento acabado de los procesos y principios de funcionamiento de los equipos, que permita plantear las mejoras, las cuales se implementarán en los prototipos, realizándose una medición mediante norma igual a la inicial para ver en que magnitud se logran las mejoras esperadas. Se pretende además que las mejoras a implementar, en la etapa de transferencia a las empresas involucradas, redunden no sólo en un beneficio técnico, sino que también los sea desde el punto de vista económico. Para ello se trabajará también sobre los procesos y métodos de fabricación para que los equipos mejorados no sean mas caros que los originales y de ser posible sean aún más económicos, todo esto apuntando a la difusión de la energía solar térmica y poner al alcance de todos estos equipos tan convenientes para la propagación de las energías limpias. El proyecto redundará también en un importante beneficio para el conocimiento de la comunidad científica en general, con el aporte de nuevos resultados en diseños novedosos y con nuevos materiales. Además, la institución se beneficiará con la formación que obtendrán los integrantes del proyecto, muchos de ellos en etapa de realización de sus estudios de posgrado y en una etapa importante de su vida como investigadores. The main goal of this project is the improvement of two thermosyphonic solar water heating systems, made of non conventional materials and with different arrangement of their storage tanks: one is vertical and the other one horizontal. The thermosyphonic systems are provided by manufacturers of the Córdoba Province, who came to the Solar Energy Group (GES) of the National University of Río Cuarto looking for help for the design of their products. In an agreement with these manufacturers, it was proposed this project in order to work analytically and experimentally in order to obtain physical-mathematical models of these two systems, which allow for changes to look by means of simulations the best changes to implement on the equipments for the improvement of their thermal performance. Then, the materials to be used are the proper systems provided by the manufacturers, which will be disarmed to be studied in detail. After the analytical study the proposals of improvement will be implemented in a high level language of programming to perform simulations in the environment of a well-known software for energy simulations (TRNSYS). After the simulations, the best modifications will be physically implemented in the prototypes to perform finally the same normalized test of the beginning and check the magnitude of the implemented improvements. The importance of this project is based on the offer of better systems the companies would make, which would benefit the deployment of the thermal solar energy. Another relevant point is to make the new equipments at the same cost of the previous ones or cheaper, in order to achieve a good deployment of the solar water heating systems; then, the manufacture processes and methods must be studied to obtain not only good technical solutions, but also economical equipments. In addition, this project will contribute to the increasing of the knowledge in the area of thermosyphonic solar systems and the training of postgraduate students.

SMPI model : a stepwise process model to facilitate software measurement process improvement along the measurement paradigms

Software engineering, software measurement, software process engineering, capability, maturity

Recent brazilian experience on farmer reaction and crop response to fertilizer use

(1) In the period 1965/77 fertilizer consumption in Brazil increased nearly fifteen foild from circa 200,000 tons of N + P2O5 + K2O to 3 million tons. During the fifteen years extending from 1950 to 1964 usage of the primary macronutrients was raised by a factor of 2 only. (2) Several explanations are given for the remarkable increase, namely: an experimental background which supplied data for recommendations of rates, time and type of application; a convenient governmental policy for minimum prices and rural credit; capacity of the industry to meet the demand of the fertilizer market; an adequate mechanism for the diffusion of the practice of fertilizer use to the farmer. (3) The extension work, which has caused a permanent change in the aptitude towards fertilization, was carried out in the traditional way by salesmen supported by a technical staff, as well as by agronomists of the official services. (4) Two new programs were started and conducted in a rather short time, both putting emphasis on the relatively new technology of fertilizer use. (5) The first program, conducted in the Southern part of the country, extended lab and green house work supplemented by a few field trials to small land owners - the so called "operação tatú" (operation armadillo). (6) The seconde program, covering a larger problem area in the Northeast and in Central Brazil, began directly in field as thousands of demonstrations and simple experiments with the participation of local people whose involvement was essential for the success of the initiative; in this case the official extension services, both foreign and national sources of funds, and universities did participate under the leadership of the Brazilian Association for the Diffusion of Fertilizers (ANDA). (7) It is felt that the Brazilian experience gained thereof could be useful to other countries under similar conditions.

Effects of population density on cauliflower crop (Brassica oleracea L. var. botrytis)

An experiment was carried out to study the effects of the following population densities cauliflowers (plants per ha): 20,833 (0.60 m x 0.80 m), 25,641 (0.60 m x 0.65 m), ....37.037 (0.60 m x 0.45 m) , 55.555 (.0.60 m x 0.30 m), and 111,111 (0,60 m x 0,15 m) ; variety Snow ball. It was concluded that the effects of plant population density are greater on curd quality (weight and size) than on production per ha. The best plant population density to produce cauliflowers curd for Brazil market is from 20,000 to 25,000 plants/ha while for mini-curd is above 55,000 plants/ha.

Doses and methods of distribution of potassium chloride on soybean crop (Glycine max (L.) Merrill) in a red latosol, affecting soil salinity, grain production and chemical composition of leaves

The present work deal t wi th an experiment under field conditions and a laboratory test of soil incubation the objectives were as follows: a. to study effects on soybean grain product ion and leaf composition of increasing doses of potassium chloride applied into the soil through two methods of distribution; b. to observe chemical modifications in the soils incubated with increasing doses of potassium chloride; and, c. to correlate field effects with chemical alterations observed in the incubation test, The field experiment was carried out in a Red Latosol (Haplustox) with soybean cultivar UFV - 1. Potassium chloride was distributed through two methods: banded (5 cm below and 5 cm aside of the seed line) and broadcasted and plowed-down. Doses used were: 0; 50; 100 and 200 kg/ha of K2O. Foliar samples were taken at flowering stage. Incubation test were made in plastic bags with 2 kg of air dried fine soil, taken from the arable layer of the field experiment, with the following doses of KC1 p,a. : 0; 50; 100; 200; 400; 800; 1,600; 3.200; 6,400 and 12,800 kg/ha of K(2)0. In the conditions observed during the present work, results allowed the following conclusions: A response by soybean grain production for doses of potassium chloride, applied in both ways, banded or broadcasted, was not observed. Leaf analysis did not show treatment influence over the leaf contents for N, P, K, Ca, Mg, and CI, Potassium chloride salinity effects in both methods of distribution for all the tested closes were not observed.

Effects of planting density on flower production in carnation crop

The influence of density of planting on flower production of carnation plants grown in vinil houses, was studied. Planting densities of 233,333; 175,000 and 116,667 plants per hectare were obtained by using planting spacings of 0.20 m between rows and 0.15 m, 0,20 m and 0.30 m between plants. Data were taken on total number of flowers per plant and per hectare. As far as planting densities are concerned, there was an increase of total flower production per hectare and a decrease of slower production per plant.

Impact of preoperative risk factors on morbidity after esophagectomy: is there room for improvement?

BACKGROUND: Despite progress in multidisciplinary treatment of esophageal cancer, oncologic esophagectomy is still the cornerstone of therapeutic strategies. Several scoring systems are used to predict postoperative morbidity, but in most cases they identify nonmodifiable parameters. The aim of this study was to identify potentially modifiable risk factors associated with complications after oncologic esophagectomy. METHODS: All consecutive patients with complete data sets undergoing oncologic esophagectomy in our department during 2001-2011 were included in this study. As potentially modifiable risk factors we assessed nutritional status depicted by body mass index (BMI) and preoperative serum albumin levels, excessive alcohol consumption, and active smoking. Postoperative complications were graded according to a validated 5-grade system. Univariate and multivariate analyses were used to identify preoperative risk factors associated with the occurrence and severity of complications. RESULTS: Our series included 93 patients. Overall morbidity rate was 81 % (n = 75), with 56 % (n = 52) minor complications and 18 % (n = 17) major complications. Active smoking and excessive alcohol consumption were associated with the occurrence of severe complications, whereas BMI and low preoperative albumin levels were not. The simultaneous presence of two or more of these risk factors significantly increased the risk of postoperative complications. CONCLUSIONS: A combination of malnutrition, active smoking and alcohol consumption were found to have a negative impact on postoperative morbidity rates. Therefore, preoperative smoking and alcohol cessation counseling and monitoring and improving the nutritional status are strongly recommended.