946 resultados para Control Volume, Iron Ore Direct Reduction, Composite Pellet, Axisymmetric Heat Transfer
Resumo:
Previous studies have suggested a critical role for the vagi during the hypertonic resuscitation of hemorrhagic shocked dogs. Vagal blockade prevented the full hemodynamic and metabolic recovery and increased mortality. This interpretation, however, was challenged on the grounds that the blockade also abolished critical compensatory mechanisms and therefore the animals would die regardless of treatment. To test this hypothesis, 29 dogs were bled (46.0 ± 6.2 ml/kg, enough to reduce the mean arterial pressure to 40 mmHg) and held hypotensive for 45 min. After 40 min, vagal activity was blocked in a reversible manner (0ºC/15 min) and animals were resuscitated with 7.5% NaCl (4 ml/kg), 0.9% NaCl (32 ml/kg), or the total volume of shed blood. In the vagal blocked isotonic saline group, 9 of 9 dogs, and in the vagal blocked replaced blood group, 11 of 11 dogs survived, with full hemodynamic and metabolic recovery. However, in the hypertonic vagal blocked group, 8 of 9 dogs died within 96 h. Survival of shocked dogs which received hypertonic saline solution was dependent on vagal integrity, while animals which received isotonic solution or blood did not need this neural component. Therefore, we conclude that hypertonic resuscitation is dependent on a neural component and not only on the transient plasma volume expansion or direct effects of hyperosmolarity on vascular reactivity or changes in myocardial contraction observed immediately after the beginning of infusion.
Resumo:
Evaluating the activity of the complement system under conditions of altered thyroid hormone levels might help elucidate the role of complement in triggering autoimmune processes. Here, we investigated alternative pathway (AP) activity in male Wistar rats (180 ± 10 g) after altering their thyroid hormone levels by treatment with triiodothyronine (T3), propylthiouracil (PTU) or thyroidectomy. T3 and thyroxine (T4) levels were determined by chemiluminescence assays. Hemolytic assays were performed to evaluate the lytic activity of the AP. Factor B activity was evaluated using factor B-deficient serum. An anti-human factor B antibody was used to measure factor B levels in serum by radial immunodiffusion. T3 measurements in thyroidectomized animals or animals treated with PTU demonstrated a significant reduction in hormone levels compared to control. The results showed a reduction in AP lytic activity in rats treated with increasing amounts of T3 (1, 10, or 50 µg). Factor B activity was also decreased in the sera of hyperthyroid rats treated with 1 to 50 µg T3. Additionally, treating rats with 25 µg T3 significantly increased factor B levels in their sera (P < 0.01). In contrast, increased factor B concentration and activity (32%) were observed in hypothyroid rats. We conclude that alterations in thyroid hormone levels affect the activity of the AP and factor B, which may in turn affect the roles of AP and factor B in antibody production.
Resumo:
In this work, bromelain was recovered from ground pineapple stem and rind by means of precipitation with alcohol at low temperature. Bromelain is the name of a group of powerful protein-digesting, or proteolytic, enzymes that are particularly useful for reducing muscle and tissue inflammation and as a digestive aid. Temperature control is crucial to avoid irreversible protein denaturation and consequently to improve the quality of the enzyme recovered. The process was carried out alternatively in two fed-batch pilot tanks: a glass tank and a stainless steel tank. Aliquots containing 100 mL of pineapple aqueous extract were fed into the tank. Inside the jacketed tank, the protein was exposed to unsteady operating conditions during the addition of the precipitating agent (ethanol 99.5%) because the dilution ratio "aqueous extract to ethanol" and heat transfer area changed. The coolant flow rate was manipulated through a variable speed pump. Fine tuned conventional and adaptive PID controllers were on-line implemented using a fieldbus digital control system. The processing performance efficiency was enhanced and so was the quality (enzyme activity) of the product.
Resumo:
Dans ce mémoire sont décrites deux méthodologies impliquant la synthèse de biaryles via l’arylation directe d’espèces aromatiques non activées, catalysée par différents éléments de transition. La première partie présente les résultats obtenus dans le cadre du développement d’une méthode simple d’arylation directe du benzène catalysée au palladium. Cette méthodologie a l’avantage de procéder sans l’ajout de ligand phosphine généralement utilisé dans les systèmes catalytiques avec le palladium et par conséquent cette réaction peut évoluer à l’air libre sans nul besoin d’une atmosphère inerte. Il est proposé que le mécanisme de formation de ces motifs biarylés pourrait passer par la mise en place d’un palladium d’espèce cationique. Ces composés pourraient éventuellement s’avérer intéressants dans la synthèse de produits pharmaceutiques comportant un motif biphényle de ce type. La deuxième partie est consacrée à une méthodologie très attrayante utilisée pour la synthèse des biphényles impliquant le fer comme catalyseur. Plusieurs catalyseurs à base de rhodium, palladium et ruthénium ont démontré leur grande efficacité dans les processus de couplage direct (insertion C-H). Cette méthodologie consiste en la première méthode efficace d’utilisation d’un catalyseur de fer dans les couplages directs sp2-sp2 avec les iodures d’aryles et iodures d’hétéroaryles. Les avantages du fer, impliquent sans contredit, des coûts moindres et des impacts environnementaux bénins. Les conditions réactionnelles sont douces, la réaction peut tolérer la présence de plusieurs groupements fonctionnels et cette dernière peut même se produire à température ambiante. La transformation s’effectue généralement avec de très bons rendements et des études mécanistiques ont démontré que le processus réactionnel était radicalaire.
Resumo:
Cette thèse s'articule autour de trois essais portant sur des questions internationales en économie des ressources naturelles. Le premier essai examine la production et l'échange des ressources non-renouvelables dans un modèle spatial et souligne le rôle de la superficie des pays et du coût des transports dans la détermination du sens de l'échange. Le deuxième essai considère le tarif d'extraction de la rente de rareté liée aux ressources naturelles non-renouvelables avec le modèle spatial développé dans premier essai. Le cadre spatial (plus général) permet de représenter des pays qui sont à la fois importateurs et producteurs de la ressource, ce qui n'est pas possible dans les modèles traditionnels de commerce international où les pays sont traités comme des points (sans dimension). Le troisième essai aborde la question des droits de propriétés sur les zones maritimes et examine l'allocation d'une population de pêcheurs entre les activités productives et non-productives dans une communauté côtière. Le premier chapitre propose un modèle spatial de commerce international des ressources non-renouvelables. Le cadre spatial considère explicitement la différence de taille géographique (superficie) entre les pays et permet ainsi de tenir compte du fait que les gisements naturels et leurs utilisateurs soient dispersés dans l'espace, même à l'intérieur d'un pays. En utilisant un modèle spatial à la Hotelling, nous examinons l'évolution dans le temps du sens de l'échange entre deux pays (ou régions) qui diffèrent du point de vue de leur technologie de production, de leur superficie et de leur dotation en gisement d'une ressource naturelle non-renouvelable. Le chapitre met en évidence le rôle de la taille géographique dans la détermination du sens de l'échange, à côté des explications traditionnelles que sont l'avantage comparatif et les dotations des facteurs. Notre analyse est fondamentalement différente des autres contributions dans la littérature sur le commerce international des ressources naturelles parce qu'elle souligne l'importance de la taille géographique et du coût de transport par rapport à d'autres facteurs dans la détermination des flux de ressource à l'équilibre. Le coût unitaire de transport joue un rôle capital pour déterminer si la différence de superficie entre les pays influence le sens de l'échange à l'équilibre plus que les autres facteurs. Le chapitre discute aussi du caractère régional des échanges qui a été observé pour certaines ressources telles que le minerai de fer et la bauxite. Le chapitre deux aborde la question de la répartition de la rente de rareté liée aux ressources naturelles non-renouvelables entre les pays producteurs et les pays consommateurs. Cette question a été abordée dans la littérature sous une hypothèse quelque peu restrictive. En effet, dans la plupart des travaux portant sur ce sujet le pays importateur est automatiquement considéré comme dépourvu de gisement et donc non producteur de la ressource. Pourtant la réalité est qu'il existe des ressources pour lesquelles un pays est à la fois producteur et importateur. Le cadre d'analyse de ce second essai est le modèle spatial développé dans le premier essai, qui permet justement qu'un pays puisse être à la fois importateur et producteur de la ressource. Le pays importateur détermine alors simultanément le tarif optimal et le taux d'extraction de son propre stock. Nous montrons que le tarif optimal croît au taux d'intérêt et de ce fait, ne crée aucune distorsion sur le sentier d'extraction de la ressource. Le tarif optimal permet de récupérer toute la rente lorsque le pays exportateur ne consomme pas la ressource. Néanmoins, la possibilité pour le pays exportateur de consommer une partie de son stock limite la capacité du pays importateur à récupérer la rente chez le pays exportateur. La présence de gisements de la ressource dans le pays importateur réduit la rente du pays exportateur et de ce fait renforce la capacité du pays importateur à récupérer la rente chez le pays exportateur. Le tarif initial est une fonction décroissante du stock de ressource dans le pays importateur. Cet essai aborde également la question de la cohérence dynamique du tarif obtenu avec la stratégie en boucle ouverte. Le troisième chapitre examine un problème d'allocation de l'effort entre les activités productives (par exemple la pêche) et les activités non productives (par exemple la piraterie maritime) dans une population de pêcheurs. La répartition de la population entre les activités de pêche et la piraterie est déterminée de façon endogène comme une conséquence du choix d'occupation. Nous établissons l'existence d'une multiplicité d'équilibres et mettons en évidence la possibilité d'une trappe de piraterie, c'est-à-dire un équilibre stable où une partie de la population est engagée dans les actes de piraterie. Le modèle permet d'expliquer l'augmentation significative des attaques de piraterie dans le Golfe d'Aden au cours des dernières années. Le chapitre discute aussi des différents mécanismes pour combattre la piraterie et souligne le rôle crucial des droits de propriété.
Resumo:
One of the most prominent industrial applications of heat transfer science and engineering has been electronics thermal control. Driven by the relentless increase in spatial density of microelectronic devices, integrated circuit chip powers have risen by a factor of 100 over the past twenty years, with a somewhat smaller increase in heat flux. The traditional approaches using natural convection and forced-air cooling are becoming less viable as power levels increase. This paper provides a high-level overview of the thermal management problem from the perspective of a practitioner, as well as speculation on the prospects for electronics thermal engineering in years to come.
Resumo:
Electroosmotic flow is a convenient mechanism for transporting polar fluid in a microfluidic device. The flow is generated through the application of an external electric field that acts on the free charges that exists in a thin Debye layer at the channel walls. The charge on the wall is due to the chemistry of the solid-fluid interface, and it can vary along the channel, e.g. due to modification of the wall. This investigation focuses on the simulation of the electroosmotic flow (EOF) profile in a cylindrical microchannel with step change in zeta potential. The modified Navier-Stoke equation governing the velocity field and a non-linear two-dimensional Poisson-Boltzmann equation governing the electrical double-layer (EDL) field distribution are solved numerically using finite control-volume method. Continuities of flow rate and electric current are enforced resulting in a non-uniform electrical field and pressure gradient distribution along the channel. The resulting parabolic velocity distribution at the junction of the step change in zeta potential, which is more typical of a pressure-driven velocity flow profile, is obtained.
Resumo:
Günter Strauss is Ph.D. in geology from the University of Munich in 1965. He is a German living by long time in Spain. Naw he is a SAPEC High Advisser His doctoral thesis, submitted in 1965, with the title "About the Geology of the Province of pyrite Southwest of the Iberian Peninsula and its oil fields, especially in the pyrite mine Louzal - Portugal" Systematized the term" Iberian Pyrite Belt ", called for the deposits of iron ore cuprífera, rich in sulfur and other metallic minerals, which occurs between the rivers Sado and Guadalquivir, where they settled several mining complexes, of Louzal, Rio Tinto, through Castro Verde, Santo Domingo and Tharsis. Local mining tradition with an ancient where today seeks to preserve the legacy and memory of mining through measures to enhance equity. The result of work carried out Louzal then formed the basis of geological and documentary collection that has survived and has been proposed for cultural units under the activities of the mining museum Louzal. The richness and importance of this collection, consisting of several hundred documents, geological samples classified, minerals and cartography, comes from its presence Situ"In its state of preservation, that despite the various threats it is still within reach of their preservation, and the relative rarity of such collections, with the units of mining production. This communication aims to reveal the contribution of Mr Strauss for the formation of this collection and submit his proposal for cultural units, with the hope that those responsible for safeguarding them understand the need for its preservation and dissemination. So discuss the scientific and professional way Günter Strauss, a geologic formation of the estate of Mines Louzal, and the draft musealization proposition.
Resumo:
This review looks at the work carried out over the past 15 years on membrane distillation and reports the conditions utilized for research. The process is still used mainly at the laboratory scale, but a few pilot plants have been built across the world, mostly for desalination and the production of potable water. Studies into membrane distillation have been concerned with the effect of mass transfer, heat transfer, and stirring rate, but the most important effect that has to be considered with this process is temperature polarization. A section on temperature polarization and the effect of boundary layers is included in this review.
Resumo:
Nowadays the electricity consumption in the residential sector attracts policy and research efforts, in order to propose saving strategies and to attain a better balance between production and consumption, by integrating renewable energy production and proposing suitable demand side management methods. To achieve these objectives it is essential to have real information about household electricity demand profiles in dwellings, highly correlated, among other aspects, with the active occupancy of the homes and to the personal activities carried out in homes by their occupants. Due to the limited information related to these aspects, in this paper, behavioral factors of the Spanish household residents, related to the electricity consumption, have been determined and analyzed, based on data from the Spanish Time Use Surveys, differentiating among the Autonomous Communities and the size of municipalities, or the type of days, weekdays or weekends. Activities involving a larger number of houses are those related to Personal Care, Food Preparation and Washing Dishes. The activity of greater realization at homes is Watching TV, which together with Using PC, results in a high energy demand in an aggregate level. Results obtained enable identify prospective targets for load control and for efficiency energy reduction recommendations to residential consumers.
Resumo:
We present here a straightforward method which can be used to obtain a quantitative indication of an individual research output for an academic. Different versions, selections and options are presented to enable a user to easily calculate values both for stand-alone papers and overall for the collection of outputs for a person. The procedure is particularly useful as a metric to give a quantitative indication of the research output of a person over a time window. Examples are included to show how the method works in practice and how it compares to alternative techniques.
Resumo:
Castoraeschna corbeti sp. nov. is described and diagnosed based on four males (holotype: Brazil, Para State, Floresta Nacional cle Carajas [6 degrees 06`13.9 `` S, 50 degrees 08`13.1 `` W, ca 600 m a.s.l.], 28 ix 2007 to be deposited in Museu Nacional, Universidade Federal do Rio de Janeiro, Rio de Janeiro). This species is similar to C. longfieldae and C. coronata but can be distinguished mainly by the absence of medio-dorsal spots on S8; postero-dorsal spots on S8-9 very narrow; cerci external margin almost straight in lateral view, without a distinct angulation between stern and base of lamina; cerci apex blunt. The probable ultimate stadium larva is described based on two individuals, male and female, collected at the type locality. Adults were observed flying along margins of a small shaded second-order stream where the larvae were taken. The surrounding forest is under impact of iron ore extraction and will probably disappear in the next years.
Resumo:
In this study, we investigated the oxidative stress influence in some prosurvival and proapoptotic proteins after myocardial infarction (MI). Male Wistar rats were divided in two groups: Sham-operated (control) and MI. MI was induced by left coronary artery occlusion. 28-days after surgery, echocardiographic, morphometric, and hemodynamic parameters were evaluated. Redox status (reduced to oxidized glutathione ratio, GSH/GSSG) and hydrogen peroxide levels (H(2)O(2)) were measured in heart tissue. The p-ERK/ERK, p-Akt/Akt, p-mTOR/mTOR and p-GSK-3 beta/GSK-3 beta ratios, as well as apoptosis-inducing factor (AIF) myocardial protein expression were quantified by Western blot. MI group showed an increase in cardiac hypertrophy (23%) associated with a decrease in ejection fraction (38%) and increase in left ventricular end-diastolic pressure (82%) when compared to control, characterizing ventricular dysfunction. Redox status imbalance was seen in MI animals, as evidenced by the decrease in the GSH/GSSG ratio (30%) and increased levels of H(2)O(2) (45%). This group also showed an increase in the ERK phosphorylation and a reduction of Akt and mTOR phosphorylation when compared to control. Moreover, we showed a reduction in the GSK-3 beta phosphorylation and an increase in AIF protein expression in MI group. Taken together, our results show increased H(2)O(2) levels and cellular redox imbalance associated to a higher p-ERK and AIF immunocontent, which would contribute to a maladaptive hypertrophy phenotype.
Resumo:
Purpose - The purpose of this paper is to develop a novel unstructured simulation approach for injection molding processes described by the Hele-Shaw model. Design/methodology/approach - The scheme involves dual dynamic meshes with active and inactive cells determined from an initial background pointset. The quasi-static pressure solution in each timestep for this evolving unstructured mesh system is approximated using a control volume finite element method formulation coupled to a corresponding modified volume of fluid method. The flow is considered to be isothermal and non-Newtonian. Findings - Supporting numerical tests and performance studies for polystyrene described by Carreau, Cross, Ellis and Power-law fluid models are conducted. Results for the present method are shown to be comparable to those from other methods for both Newtonian fluid and polystyrene fluid injected in different mold geometries. Research limitations/implications - With respect to the methodology, the background pointset infers a mesh that is dynamically reconstructed here, and there are a number of efficiency issues and improvements that would be relevant to industrial applications. For instance, one can use the pointset to construct special bases and invoke a so-called ""meshless"" scheme using the basis. This would require some interesting strategies to deal with the dynamic point enrichment of the moving front that could benefit from the present front treatment strategy. There are also issues related to mass conservation and fill-time errors that might be addressed by introducing suitable projections. The general question of ""rate of convergence"" of these schemes requires analysis. Numerical results here suggest first-order accuracy and are consistent with the approximations made, but theoretical results are not available yet for these methods. Originality/value - This novel unstructured simulation approach involves dual meshes with active and inactive cells determined from an initial background pointset: local active dual patches are constructed ""on-the-fly"" for each ""active point"" to form a dynamic virtual mesh of active elements that evolves with the moving interface.
Resumo:
alpha-d coincidence data are studied for the (6)Li + (59)Co reaction at E(lab) = 29.6 MeV. A kinematic analysis is used to identify which process, leading to the same final state, has the major contribution for selected angular regions. The contributions of the (6)Li sequential and direct breakup to the incomplete fusion/transfer process is discussed by considering the corresponding lifetimes obtained by using a semiclassical approach.