Building a global consensus approach to chordoma: a position paper from the medical and patient community

Chordomas are very rare bone malignant tumours that have had a shortage of effective treatments for a long time. New treatments are now available for both the local and the metastatic phase of the disease, but the degree of uncertainty in selecting the most appropriate treatment remains high and their adoption remains inconsistent across the world, resulting in suboptimum outcomes for many patients. In December, 2013, the European Society for Medical Oncology (ESMO) convened a consensus meeting to update its clinical practice guidelines on sarcomas. ESMO also hosted a parallel consensus meeting on chordoma that included more than 40 chordoma experts from several disciplines and from both sides of the Atlantic, with the contribution and sponsorship of the Chordoma Foundation, a global patient advocacy group. The consensus reached at that meeting is shown in this position paper.

Regret theory-based scenario building using an interacttive process

This paper is an introduction of the regret theory-based scenario building approach combining with a modified Delphi method that uses an interactive process to design and assess four different TDM measures (i.e., cordon toll, parking charge, increased bus frequency and decreased bus fare). The case study of Madrid is used to present the analysis and provide policy recommendations. The new scenario building approach incorporates expert judgement and transport models in an interactive process. It consists of a two-round modified Delphi survey, which was answeared by a group of Spanish transport experts who were the participants of the Transport Engineering Congress (CIT 2012), and an integrated land-use and transport model (LUTI) for Madrid that is called MARS (Metropolitan Activity Relocation Simulator).

Proceso metodológico para optimizar la toma de decisiones en el proyecto de envolventes arquitectónicas multicapa = Methodological process for the optimization of the decision making in multilayer building envelope projects

La presente tesis doctoral se enmarca dentro del concepto de la sistematización del conocimiento en arquitectura, más concretamente en el campo de las construcciones arquitectónicas y la toma de decisiones en la fase de proyecto de envolventes arquitectónicas multicapa. Por tanto, el objetivo principal es el establecimiento de las bases para una toma de decisiones informadas durante el proyecto de una envolvente multicapa con el fin de colaborar en su optimización. Del mismo modo que la historia de la arquitectura está relacionada con la historia de la innovación en construcción, la construcción está sujeta a cambios como respuesta a los fracasos anteriores. En base a esto, se identifica la toma de decisiones en la fase de proyecto como el estadio inicial para establecer un punto estratégico de reflexión y de control sobre los procesos constructivos. La presente investigación, conceptualmente, define los parámetros intervinientes en el proyecto de envolventes arquitectónicas multicapa a partir de una clasificación y sistematización de todos los componentes (elementos, unidades y sistemas constructivos) utilizados en las fachadas multicapa. Dicha sistematización se materializa en una hoja matriz de datos en la que, dentro de una organización a modo de árbol, se puede acceder a la consulta de cada componente y de su caracterización. Dicha matriz permite la incorporación futura de cualquier componente o sistema nuevo que aparezca en el mercado, relacionándolo con aquellos con los que comparta ubicación, tipo de material, etc. Con base en esa matriz de datos, se diseña la sistematización de la toma de decisiones en la fase de proyecto de una envolvente arquitectónica, en concreto, en el caso de una fachada. Operativamente, el resultado se presenta como una herramienta que permite al arquitecto o proyectista reflexionar y seleccionar el sistema constructivo más adecuado, al enfrentarse con las distintas decisiones o elecciones posibles. La herramienta se basa en las elecciones iniciales tomadas por el proyectista y se estructura, a continuación y sucesivamente, en distintas aproximaciones, criterios, subcriterios y posibilidades que responden a los distintos avances en la definición del sistema constructivo. Se proponen una serie de fichas operativas de comprobación que informan sobre el estadio de decisión y de definición de proyecto alcanzados en cada caso. Asimismo, el sistema permite la conexión con otros sistemas de revisión de proyectos para fomentar la reflexión sobre la normalización de los riesgos asociados tanto al proprio sistema como a su proceso constructivo y comportamiento futuros. La herramienta proporciona un sistema de ayuda para ser utilizado en el proceso de toma de decisiones en la fase de diseño de una fachada multicapa, minimizando la arbitrariedad y ofreciendo una cualificación previa a la cuantificación que supondrá la elaboración del detalle constructivo y de su medición en las sucesivas fases del proyecto. Al mismo tiempo, la sistematización de dicha toma de decisiones en la fase del proyecto puede constituirse como un sistema de comprobación en las diferentes fases del proceso de decisión proyectual y de definición de la envolvente de un edificio. ABSTRACT The central issue of this doctoral Thesis is founded on the framework of the concept of the systematization of knowledge in architecture, in particular, in respect of the field of building construction and the decision making in the design stage of multilayer building envelope projects. Therefore, the main objective is to establish the bases for knowledgeable decision making during a multilayer building envelope design process, in order to collaborate with its optimization. Just as the history of architecture is connected to the history of innovation in construction, construction itself is subject to changes as a response to previous failures. On this basis, the decisions made during the project design phase are identified as the initial state to establish an strategic point for reflection and control, referred to the constructive processes. Conceptually, this research defines the parameters involving the multilayer building envelope projects, on the basis of a classification and systematization for all the components (elements, constructive units and constructive systems) used in multilayer façades. The mentioned systematization is materialized into a data matrix sheet in which, following a tree‐like organization, the access to every single component and its characterization is possible. The above data matrix allows the future inclusion of any new component or system that may appear in the construction market. That new component or system can be put into a relationship with another, which it shares location, type of material,… with. Based on the data matrix, the systematization of the decision making process for a building envelope design stage is designed, more particularly in the case of a façade. Putting this into practice, it is represented as a tool which allows the architect or the designer, to reflect and to select the appropriate building system when facing the different elections or the different options. The tool is based on the initial elections taken by the designer. Then and successively, it is shaped on the form of different operative steps, criteria, sub‐criteria and possibilities which respond to a different progress in the definition of the building construction system. In order to inform about the stage of the decision and the definition reached by the project in every particular case, a range of operative sheets are proposed. Additionally, the system allows the connection with other reviewing methods for building projects. The aim of this last possibility is to encourage the reflection on standardization of the associated risks to the building system itself and its future performance. The tool provides a helping system to be used during the decision making process for a multilayer façade design. It minimizes the arbitrariness and offers a qualification previous to the quantification that will be done with the development of the construction details and their bill of quantities, that in subsequent project stages will be executed. At the same time, the systematization of the mentioned decision making during the design phase, can be found as a checking system in the different stages of the decision making design process and in the different stages of the building envelope definition.

Systematic Process for Building a Fault Diagnoser Based on Petri Nets Applied to a Helicopter

This work presents a systematic process for building a Fault Diagnoser (FD), based on Petri Nets (PNs) which has been applied to a small helicopter. This novel tool is able to detect both intermittent and permanent faults. The work carried out is discussed from theoretical and practical point of view. The procedure begins with a division of the whole system into subsystems, which are the devices that have to be modeled by using PN, considering both the normal and fault operations. Subsequently, the models are integrated into a global Petri Net diagnoser (PND) that is able to monitor a whole helicopter and show critical variables to the operator in order to determine the UAV health, preventing accidents in this manner. A Data Acquisition System (DAQ) has been designed for collecting data during the flights and feeding PN diagnoser with them. Several real flights (nominal or under failure) have been carried out to perform the diagnoser setup and verify its performance. A summary of the validation results obtained during real flight tests is also included. An extensive use of this tool will improve preventive maintenance protocols for UAVs (especially helicopters) and allow establishing recommendations in regulations

Building intuition of iron evolution during solar cell processing through analysis of different process models

An important aspect of Process Simulators for photovoltaics is prediction of defect evolution during device fabrication. Over the last twenty years, these tools have accelerated process optimization, and several Process Simulators for iron, a ubiquitous and deleterious impurity in silicon, have been developed. The diversity of these tools can make it difficult to build intuition about the physics governing iron behavior during processing. Thus, in one unified software environment and using self-consistent terminology, we combine and describe three of these Simulators. We vary structural defect distribution and iron precipitation equations to create eight distinct Models, which we then use to simulate different stages of processing. We find that the structural defect distribution influences the final interstitial iron concentration ([Fe-i]) more strongly than the iron precipitation equations. We identify two regimes of iron behavior: (1) diffusivity-limited, in which iron evolution is kinetically limited and bulk [Fe-i] predictions can vary by an order of magnitude or more, and (2) solubility-limited, in which iron evolution is near thermodynamic equilibrium and the Models yield similar results. This rigorous analysis provides new intuition that can inform Process Simulation, material, and process development, and it enables scientists and engineers to choose an appropriate level of Model complexity based on wafer type and quality, processing conditions, and available computation time.

Building up European leadership - an assessment of the recent process. CHALLENGE EUROPE Issue 22 - Challenges and new beginnings: Priorities for the EU's new leadership, September 2014.

Europe is in need of a new leadership capacity able to recreate stronger European unity in the external and internal fronts. Otherwise, anti-European forces will increase their influence and presence in European governments and EU institutions with large implications for the direction of European integration. This will be the central concern in making a first short assessment of the recent process of building European leadership capacity for the next five years to come. This assessment will particularly focus on the choice of the President of the European Commission, of the President of the European Council and, finally of the members of the European Commission.

Research and innovation in the building regulatory process : proceedings of the first NBS/NCSBCS joint conference, held in Providence, Rhode Island, on September 21-22, 1976, in conjunction with the ninth annual meeting of the National Conference of States on Building Codes and Standards (NCSBCS), inc. /

Mode of access: Internet.

Research and innovation in the building regulatory process : proceedings of the third annual NBS/NCSBCS joint conference, held in Annapolis, Maryland on September 12, 1978, in conjunction with the eleventh annual meeting of the National Conference of States on Building Codes and Standards, Inc. (NCSBCS) /

Mode of access: Internet.

Research and innovation in the building regulatory process : proceedings of the Fourth NBS/NCSBCS Joint Conference /

Mode of access: Internet.

Building a holarchy using business process-oriented holonic (PrOH) modeling

The application of systems thinking to designing, managing, and improving business processes has developed a new "holonic-based" process modeling methodology. The theoretical background and the methodology are described using examples taken from a large organization designing and manufacturing capital goods equipment operating within a complex and dynamic environment. A key point of differentiation attributed to this methodology is that it allows a set of models to be produced without taking a task breakdown approach but instead uses systems thinking and a construct known as the "holon" to build process descriptions as a system of systems (i.e., a holarchy). The process-oriented holonic modeling methodology has been used for total quality management and business process engineering exercises in different industrial sectors and builds models that connect the strategic vision of a company to its operational processes. Exercises have been conducted in response to environmental pressures to make operations align with strategic thinking as well as becoming increasingly agile and efficient. This unique methodology is best applied in environments of high complexity, low volume, and high variety, where repeated learning opportunities are few and far between (e.g., large development projects). © 2007 IEEE.

The process of building public-private partnerships:an organizational identity perspective

DUE TO COPYRIGHT RESTRICTIONS, ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY WITH PRIOR ARRANGEMENT

Building Regional Security: Cooperation in the 21st Century: The Case of the Caribbean Regional Security System [RSS]

Small states that lack capacity and act on their own may fall victim to international and domestic terrorism, transnational organized crime or criminal gangs. The critical issue is not whether small Caribbean states should cooperate in meeting security challenges, but it is rather in what manner, and by which mechanisms can they overcome obstacles in the way of cooperation. The remit of the Regional Security System (RSS) has expanded dramatically, but its capabilities have improved very slowly. The member governments of the RSS are reluctant to develop military capacity beyond current levels since they see economic and social development and disaster relief as priorities, requiring little investment in military hardware. The RSS depends on international donors such as the USA, Canada, Great Britain, and increasingly China to fund training programs, maintain equipment and acquire material. In the view of most analysts, an expanded regional arrangement based on an RSS nucleus is not likely in the foreseeable future. Regional political consensus remains elusive and the predominance of national interests over regional considerations continues to serve as an obstacle to any CARICOM wide regional defense mechanism. Countries in the Caribbean, including the members of the RSS, have to become more responsible for their own security from their own resources. While larger CARICOM economies can do this, it would be difficult for most OECS members of the RSS to do the same. The CARICOM region including the RSS member countries, have undertaken direct regional initiatives in security collaboration. Implementation of the recommendations of the Regional Task Force on Crime and Security (RTFCS) and the structure and mechanisms created for the staging of the Cricket World Cup (CWC 2007) resulted in unprecedented levels of cooperation and permanent legacy institutions for the regional security toolbox. The most important tier of security relationships for the region is the United States and particularly USSOUTHCOM. The Caribbean Basin Security Initiative [CBSI] in which the countries of the RSS participate is a useful U.S. sponsored tool to strengthen the capabilities of the Caribbean countries and promote regional ownership of security initiatives. Future developments under discussion by policy makers in the Caribbean security environment include the granting of law enforcement authority to the military, the formation of a single OECS Police Force, and the creation of a single judicial and law enforcement space. The RSS must continue to work with its CARICOM partners, as well as with the traditional “Atlantic Powers” particularly Canada, the United States and the United Kingdom to implement a general framework for regional security collaboration. Regional security cooperation should embrace wider traditional and non-traditional elements of security appropriate to the 21st century. Security cooperation must utilize to the maximum the best available institutions, mechanisms, techniques and procedures already available in the region. The objective should not be the creation of new agencies but rather the generation of new resources to take effective operations to higher cumulative levels. Security and non-security tools should be combined for both strategic and operational purposes. Regional, hemispheric, and global implications of tactical and operational actions must be understood and appreciated by the forces of the RSS member states. The structure and mechanisms, created for the staging of Cricket World Cup 2007 should remain as legacy institutions and a toolbox for improving regional security cooperation in the Caribbean. RSS collaboration should build on the process of operational level synergies with traditional military partners. In this context, the United States must be a true partner with shared interests, and with the ability to work unobtrusively in a nationalistic environment. Withdrawal of U.S. support for the RSS is not an option.