Thin films composed of Ag nanoclusters dispersed in TiO2: Influence of composition and thermal annealing on the microstructure and physical responses

Noble metal powders containing gold and silver have been used for many centuries, providing different colours in the windows of the medieval cathedrals and in ancient Roman glasses. Nowadays, the interest in nanocomposite materials containing noble nanoparticles embedded in dielectric matrices is related with their potential use for a wide range of advanced technological applications. They have been proposed for environmental and biological sensing, tailoring colour of functional coatings, or for surface enhanced Raman spectroscopy. Most of these applications rely on the so-called localised surface plasmon resonance absorption, which is governed by the type of the noble metal nanoparticles, their distribution, size and shape and as well as of the dielectric characteristics of the host matrix. The aim of this work is to study the influence of the composition and thermal annealing on the morphological and structural changes of thin films composed of Ag metal clusters embedded in a dielectric TiO2 matrix. Since changes in size, shape and distribution of the clusters are fundamental parameters for tailoring the properties of plasmonic materials, a set of films with different Ag concentrations was prepared. The optical properties and the thermal behaviour of the films were correlated with the structural and morphological changes promoted by annealing. The films were deposited by DC magnetron sputtering and in order to promote the clustering of the Ag nanoparticles the as-deposited samples were subjected to an in-air annealing protocol. It was demonstrated that the clustering of metallic Ag affects the optical response spectrum and the thermal behaviour of the films.

Microstructural evolution of Au/TiO2 nanocomposite films: The influence of Au concentration and thermal annealing

Nanocomposite thin films consisting of a dielectric matrix, such as titanium oxide (TiO2), with embedded gold (Au) nanoparticles were prepared and will be analysed and discussed in detail in the present work. The evolution of morphological and structural features was studied for a wide range of Au concentrations and for annealing treatments in air, for temperatures ranging from 200 to 800 ��C. Major findings revealed that for low Au atomic concentrations (at.%), there are only traces of clustering, and just for relatively high annealing temperatures, T ��� 500 ��C. Furthermore, the number of Au nanoparticles is extremely low, even for the highest annealing temperature, T = 800 ��C. It is noteworthy that the TiO2 matrix also crystallizes in the anatase phase for annealing temperatures above 300 ��C. For intermediate Au contents (5 at.% ��� CAu ��� 15 at.%), the formation of gold nanoclusters was much more evident, beginning at lower annealing temperatures (T ��� 200 ��C) with sizes ranging from 2 to 25 nm as the temperature increased. A change in the matrix crystallization from anatase to rutile was also observed in this intermediate range of compositions. For the highest Au concentrations (> 20 at.%), the films tended to form relatively larger clusters, with sizes above 20 nm (for T ��� 400 ��C). It is demonstrated that the structural and morphological characteristics of the films are strongly affected by the annealing temperature, as well as by the particular amounts, size and distribution of the Au nanoparticles dispersed in the TiO2 matrix.

An experimental investigation on nano-TiO2 and fly ash based high performance concrete

High performance concrete (HPC) offers several advantages over normal-strength concrete, namely, high mechanical strength and high durability. Therefore, HPC allows for concrete structures with less steel reinforcement and a longer service life, both of which are crucial issues in the eco-efficiency of construction materials. Nevertheless international publications on the field of concrete containing nanoparticles are scarce when compared to Portland cement concrete (around 1%) of the total international publications. HPC nanoparticle-based publications are even scarcer. This article presents the results of an experimental investigation on the mechanical properties and durability of HPC based on nano-TiO2 and fly ash. The durability performance was assessed by means of water absorption by immersion, water absorption by capillarity, ultrasonic pulse velocity, electric resistivity, chloride diffusion and resistance to sulphuric acid attack. The results show that the concretes containing an increased content of nano-TiO2 show decreased durability performance. The results also show that concrete with 1% nano-TiO2 and 30% fly ash as Portland cement replacement show a high mechanical strength (C55/C67) and a high durability. However, it should be noted that the cost of nano-TiO2 is responsible for a severe increase in the cost of concrete mixtures.

Layer-by-layer technique to developing functional nanolaminate films with antifungal activity

The layer-by-layer (LbL) deposition method was used to build up alternating layers (five) of different polyelectrolyte solutions (alginate, zein-carvacrol nanocapsules, chitosan and chitosan-carvacrol emulsions) on an aminolysed/charged polyethylene terephthalate (A/C PET) film. These nanolaminated films were characterised by contact angle measurements and through the determination of water vapour (WVTR) and oxygen (O2TR) transmission rates. The effect of active nanolaminated films against the Alternaria sp. and Rhizopus stolonifer was also evaluated. This procedure allowed developing optically transparent nanolaminated films with tuneable water vapour and gas properties and antifungal activity. The water and oxygen transmission rate values for the multilayer films were lower than those previously reported for the neat alginate or chitosan films. The presence of carvacrol and zein nanocapsules significantly decreased the water transmission rate (up to 40 %) of the nanolaminated films. However, the O2TR behaved differently and was only improved (up to 45 %) when carvacrol was encapsulated, i.e. nanolaminated films prepared by alternating alginate with nanocapsules of zein-carvacrol layers showed better oxygen barrier properties than those prepared as an emulsion of chitosan and carvacrol. These films containing zein-carvacrol nanocapsules also showed the highest antifungal activity (30 %), which did not significantly differ from those obtained with the highest amount of carvacrol, probably due to the controlled release of the active agent (carvacrol) from the zein-carvacrol nanocapsules. Thus, this work shows that nanolaminated films prepared with alternating layers of alginate and zein-carvacrol nanocapsules can be considered to improve the shelf-life of foodstuffs.

Desarrollo de tableros aglomerados compactos de c��scara de man��. Peanuts husks compact board development

El presente proyecto de investigaci��n solicitado es continuacion de una l��nea de trabajo con insumos de desecho agroindustrial regional en la provincia de Cordoba. Prev�� aportes que contribuyan a la sustentabilidad econ��mica y social, y ambiental. Se trata de aportar valor agregado a importantes cantidades residuales de cascaras de mani. Adem��s promueve la produccion de materiales y componentes de construcci��n de viviendas saludables y accesibles para sectores con necesidades sociohabitacionales.El deshecho de c��scara de man�� constituye hoy en la provincia de C��rdoba, un recurso sobre abundante no aprovechado en la escala en que se dispone. Existen desarrollos para su aprovechamiento - camadas de aves, alimento de ganado, carbon activado- , que no alcanzan a consumir las enormes cantidades de cascaras que se disponen hoy: alrededor de 250 000 Tn/ a��o. (La produccion anual de mani en caja en la provincia de Cordoba es estimada en 700.000 Tn/a��o)A partir de los resultados ya obtenidos con paneles livianos termoaislantes, utilizados en cielorrasos y tabiques divisorios, el nuevo trabajo de investigaci��n y desarrollo se propone avanzar sobre las condiciones de produccion de tableros compactos, similares a los producidos comercialmente con residuos de la industria de la madera. Se estudiaran y experimentaran las propiedades de uso de resinas poliester, ureaformaldehido y fenolformaldehido, bajo condiciones de alta presion y temperatura. En la primera etapa (1�� a��o) buscamos obtener nuevos materiales en escala de probetas.En una etapa siguiente (2�� a��o), los nuevos materiales obtenidos ser��n aplicados al dise��o de componentes de vivienda. Se estudiar��n las posibilidades alternativas de empleo en relaci��n a los par��metros de evaluaci��n : peso, resistencia mec��nica, aislaci��n t��rmica, resistencia a la humedad, y al envejecimiento acelerado.En la ��ltima etapa (3�� a��o) los resultados obtenidos ser��n aplicados en modelos de escala real y/o prototipos demostrativos para evaluar su puesta en servicio.

An investigation into the temperature distribution resulting from cutting of compact bone using a reciprocating bone saw

Surgical procedures such as osteotomy and hip replacement involve the cutting of bone with the aid of various manual and powered cutting instruments including manual and powered bone saws. The basic mechanics of bone sawing processes are consistent with most other material sawing processes such as for wood or metal. Frictional rubbing between the blade of the saw and the bone results in the generation of localised heating of the cut bone. Research studies have been carried out which consider the design of the bone saw which deals with specifics of the saw teeth geometry and research which examines the effect of drilling operations on heating of the bone has shown that elevated temperatures will occur from frictional overheating. This overheating in localised areas is known to have an impact on the rate of healing of the bone post operation and the sharpness life of the blade. The purpose of this study was to measure the temperature at three zones at fixed intervals of 3mm, 6mm, and 9mm away from the cutting zone. It should be noted that it was the first time that this measurement technique was used to measure the temperature gradient through the bone specimen thereby establishing the extent to which clinicians are experiencing thermal injury during sawing of bone while using a reciprocating saw. The effect of various cutting feed rate on temperature elevation was also investigated in this research. The results showed that there will be a region of bone at least 9mm either side of the cutting blade experiencing thermal injury as temperatures in this region exceeded the threshold temperature of 44��C for necrosis (cell death).

Acoustic emission analysis of the effect of a 2D wedge shaped blade on the compact bone cutting process

Surgeons may use a number of cutting instruments such as osteotomes and chisels to cut bone during an operative procedure. The initial loading of cortical bone during the cutting process results in the formation of microcracks in the vicinity of the cutting zone with main crack propagation to failure occuring with continued loading. When a material cracks, energy is emitted in the form of Acoustic Emission (AE) signals that spread in all directions, therefore, AE transducers can be used to monitor the occurrence and development of microcracking and crack propagation in cortical bone. In this research, number of AE signals (hits) and related parameters including amplitude, duration and absolute energy (abs-energy) were recorded during the indentation cutting process by a wedge blade on cortical bone specimens. The cutting force was also measured to correlate between load-displacement curves and the output from the AE sensor. The results from experiments show AE signals increase substantially during the loading just prior to fracture between 90% and 100% of maximum fracture load. Furthermore, an amplitude threshold value of 64dB (with approximate abs-energy of 1500 aJ) was established to saparate AE signals associated with microcracking (41 ��� 64dB) from fracture related signals (65 ��� 98dB). The results also demonstrated that the complete fracture event which had the highest duration value can be distinguished from other growing macrocracks which did not lead to catastrophic fracture. It was observed that the main crack initiation may be detected by capturing a high amplitude signal at a mean load value of 87% of maximum load and unsteady crack propagation may occur just prior to final fracture event at a mean load value of 96% of maximum load. The author concludes that the AE method is useful in understanding the crack initiation and fracture during the indentation cutting process.

Analysis, design, optimization and realization of compact high performance printed RF filters

Magdeburg, Univ., Fak. f��r Elektrotechnik und Informationstechnik, Diss., 2010

Non compact euclidean cone 3-manifolds with cone angles less than 2���

We study of noncompact Euclidean cone manifolds with cone angles less than c&2�� and singular locus a submanifold. More precisely, we describe its structure outside a compact set. As a corol lary we classify those with cone angles & 2��/3 and those with cone angles = 2��/3.

Parametric analysis of different compact tension specimens for fracture toughness characterisation in woven composite materials

Estudi elaborat a partir d���una estada a l��� Imperial College London, entre juliol i novembre de 2006. En aquest treball s���ha investigat la geometria m��s apropiada per a la caracteritzaci�� de la tenacitat a fractura intralaminar de materials comp��sits laminats amb teixit. L���objectiu ��s assegurar la propagaci�� de l���esquerda sense que la proveta falli abans per cap altre mecanisme de dany per tal de permetre la caracteritzaci�� experimental de la tenacitat a fractura intralaminar de materials comp��sits laminats amb teixit. Amb aquesta fi, s���ha dut a terme l���an��lisi param��trica de diferents tipus de provetes mitjan��ant el m��tode dels elements finits (FE) combinat amb la virtual crack closure technique (VCCT). Les geometries de les provetes analitzades corresponen a la proveta de l���assaig compact tension (CT) i diferents variacions com la extended compact tension (ECT), la proveta widened compact tension (WCT), tapered compact tension (TCT) i doubly-tapered compact tension (2TCT). Com a resultat d���aquestes an��lisis s���han derivat diferents conclusions per obtenir la geometria de proveta m��s apropiada per a la caracteritzaci�� de la tenacitat a fractura intralaminar de materials comp��sits laminats amb teixit. A m��s, tamb�� s���han dut a terme una s��rie d���assaigs experimentals per tal de validar els resultats de les an��lisis param��triques. La concordan��a trobada entre els resultats num��rics i experimentals ��s bona tot i la pres��ncia d���efectes no previstos durant els assaigs experimentals.

Simulations of parasitic and intrinsic capacitances related to Multiple-Gate-Field-Effect Transistor architectures

Report for the scientific sojourn carried out at the Universit�� Catholique de Louvain, Belgium, from March until June 2007. In the first part, the impact of important geometrical parameters such as source and drain thickness, fin spacing, spacer width, etc. on the parasitic fringing capacitance component of multiple-gate field-effect transistors (MuGFET) is deeply analyzed using finite element simulations. Several architectures such as single gate, FinFETs (double gate), triple-gate represented by Pi-gate MOSFETs are simulated and compared in terms of channel and fringing capacitances for the same occupied die area. Simulations highlight the great impact of diminishing the spacing between fins for MuGFETs and the trade-off between the reduction of parasitic source and drain resistances and the increase of fringing capacitances when Selective Epitaxial Growth (SEG) technology is introduced. The impact of these technological solutions on the transistor cut-off frequencies is also discussed. The second part deals with the study of the effect of the volume inversion (VI) on the capacitances of undoped Double-Gate (DG) MOSFETs. For that purpose, we present simulation results for the capacitances of undoped DG MOSFETs using an explicit and analytical compact model. It monstrates that the transition from volume inversion regime to dual gate behaviour is well simulated. The model shows an accurate dependence on the silicon layer thickness,consistent withtwo dimensional numerical simulations, for both thin and thick silicon films. Whereas the current drive and transconductance are enhanced in volume inversion regime, our results show thatintrinsic capacitances present higher values as well, which may limit the high speed (delay time) behaviour of DG MOSFETs under volume inversion regime.

Eimeria vitellini n. sp. (Apicomplexa: eimeriidae) from the brazilian toucan Rhamphastos vitellinus vitellinus Lichtenstein (Aves: Picicformes: Rhamplastidae)

Eimeria vitellini n. sp. is described from the faeces of the Rhamphastos v. vitellinus. Oocysts broadly ellipsoidal to oval (egg-shaped), 22,6 x 18.3 (20.0-25.0 x 16.3-22.5) micronm, shapeindex (length/width) 1.2 (1.1-1.1). Oocyst wall a single colourless layer about 0.5 micronm thick, becoming thinner at one ectremity, at which point the oocyst usually ruptures. No oocyst residuum, but 1 or 2 small polr bodies of about 1.0-1.5 x 0.5-1.0 micronm. Sporocysts ellongated ellipsoid (pearshaped), 14.3 x 7.5 (13.8-15.0 x 6.9-7.5) micronm, shape-index (1.9 (1.8-2.0), with a thin colourless wall bearing a very delicate Stieda body: a conspicuous sub-Stieda body is present. Sporozoites with anterior and posterior regractile bodies and strongly recurved around a bulky, compact sporocyst residuum composed of relatively fine granules and spherules.

Persistent bundles over a two dimensional compact set

"Vegeu el resum a l'inici del document del fitxer adjunt."

Observations on some Avian Coccidia (Apicomplexa: Eimeriidae) in Amazonian Brazil

Oocysts of Eimeria porphyrulae n. sp. are described in faeces of Porphyrula martinica (Aves: Gruiformes: Rallidae). They are ellipsoidal to oval, 22.4 x 17.7 (20.0-23.7 x 16.2-18.7) ��m, shape-index (length/width) 1.3. Oocyst wall about 1.25 ��m thick, colourless, with two layers: inner one prominently striated. Micropyle and sub-micropylar granule present: no oocyst residuum. Sporocysts 17.5 x 9.0 (17.0-19.0 x 8.0-10.0) ��m, shape-index 1.9, with inconspicuous Stieda/sub-Stieda bodies. Sporocyst residuum of scattered granules, sometimes a compact mass: sporozoites with two refractile bodies. Eimeria crypturelli n. sp. is described in faeces of Crypturellus soiu (Tinamiformes: Tinamidae). Oocysts ellipsoidal-oval, 20.75 x 14.5 (17.5-25.0 x 11.25-21.25) ��m, shape-index 1.4. Oocysts wall about 1.25 ��m thick and bi-layered: inner layer faintly striated. Micropyle present, with oocyst residuum immediately below: single polar body rarely present. Sporocysts 13.0 x 7.5 (12.5-13.75 x 7,5-8.1) ��m, shape-index 1.7, with a Stieda body but seemingly no sub-Stieda. Sporocyst residuum compact: sporozoites with two refractile bodies. Isospora cacici n. sp. is recorded from faeces of Cacicus cela cela (Passeriformes: Icteridae). Oocysts subspherical-spherical, 26.5 x 23.7 (22.5-27.5 x 20.0-26.2) ��m, shape-index 1.1. Wall a single, colourless layer about 1.5 ��m thick. No micropyle or oocyst residuum: 1-2 polar bodies. Sporocysts ellipsoidal, 17.7 x 12.5 (17.5-18.75 x 11.25-13.75) ��m, shape-index 1.4, with pronounced Stieda/sub-Stieda bodies: residuum compact and sporozoites with two refractile bodies. Isospora thraupis n. sp. is described from faeces of Thraupis palmarum melanoptera (Passeriformes: Thraupidae). Oocysts subspherial-spherical, 19.9 x 19.0 (18.7-21.2 x 18.75-20.0) ��m, shape-index 1.0. Wall about 0.6 ��m thick, smooth, colourless and a single layer: no micropyle, oocyst residuum or polar bodies. Sporocysts 14.2 x 9.2 (13.7-16.2 x 8.7-10.0) ��m, shape-index 1.5: Stied/sub-Stieda bodies inconspicuous. Residuum compact: sporozoites with two refractile bodies.

Identification of Mycobacteria by Thin Layer Chromatographic Analysis of Mycolic Acids and Conventional Biochemical Method: Four Years of Experience

Mycolic acids analysis by thin-layer chromatography (TLC) has been employed by several laboratories worldwide as a method for fast identification of mycobacteria. This method was introduced in Brazil by our laboratory in 1992 as a routine identification technique. Up to the present, 861 strains isolated were identified by mycolic acids TLC and by standard biochemical tests; 61% out of these strains came as clinical samples, 4% isolated from frogs and 35% as environmental samples. Mycobacterium tuberculosis strains identified by classical methods were confirmed by their mycolic acids contents (I, III and IV). The method allowed earlier differentiation of M. avium complex - MAC (mycolic acids I, IV and VI) from M. simiae (acids I, II and IV), both with similar biochemical properties. The method also permitted to distinguish M. fortuitum (acids I and V) from M. chelonae (acids I and II) , and to detect mixed mycobacterial infections cases as M. tuberculosis with MAC and M. fortuitum with MAC. Concluding, four years experience shows that mycolic acids TLC is an easy, reliable, fast and inexpensive method, an important tool to put together conventional mycobacteria identification methods.