E-learning systems support of collaborative agreements: a theoretical model

This paper introduces a theoretical model for developing integrated degree programmes through e-learning systems as stipulated by a collaboration agreement signed by two universities. We have analysed several collaboration agreements between universities at the national, European, and transatlantic level as well as various e-learning frameworks. A conceptual model, a business model, and the architecture design are presented as part of the theoretical model. The paper presents a way of implementing e-learning systems as a tool to support inter-institutional degree collaborations, from the signing of the collaborative agreement to the implementation of the necessary services. In order to show how the theory can be tested one sample scenario is presented.

Relationship among research collaboration, number of documents and number of citations. A case study in Spanish computer science production in 2000-2009.

This paper analyzes the relationship among research collaboration, number of documents and number of citations of computer science research activity. It analyzes the number of documents and citations and how they vary by number of authors. They are also analyzed (according to author set cardinality) under different circumstances, that is, when documents are written in different types of collaboration, when documents are published in different document types, when documents are published in different computer science subdisciplines, and, finally, when documents are published by journals with different impact factor quartiles. To investigate the above relationships, this paper analyzes the publications listed in the Web of Science and produced by active Spanish university professors between 2000 and 2009, working in the computer science field. Analyzing all documents, we show that the highest percentage of documents are published by three authors, whereas single-authored documents account for the lowest percentage. By number of citations, there is no positive association between the author cardinality and citation impact. Statistical tests show that documents written by two authors receive more citations per document and year than documents published by more authors. In contrast, results do not show statistically significant differences between documents published by two authors and one author. The research findings suggest that international collaboration results on average in publications with higher citation rates than national and institutional collaborations. We also find differences regarding citation rates between journals and conferences, across different computer science subdisciplines and journal quartiles as expected. Finally, our impression is that the collaborative level (number of authors per document) will increase in the coming years, and documents published by three or four authors will be the trend in computer science literature.

UER technique: conceptualisation for agent oriented development

The problem of conceptualisation is the first step towards the identication of the functional requirements of a system. This article proposes two extensions of well-known object oriented techniques: UER (User-Environment-Responsibility) technique and enhanced CRC (Class-ResponsibilityCollaboration) cards. UER technique consists of (a) looking for the users of systems and describing the ways the system is used; (b) looking for the objects of the environment and describing the possible interactions; and (c) looking for the general requirements or goals of the system, the actions that it should carry out without explicit interaction. The enhanced CRC cards together with the internal use cases technique is used for dening collaborations between agents. These techniques can be easily integrated in UML (Unied Modelling Language) [2], dening the new notation symbols as stereotypes.

Interconexión monolítica de dispositivos fotovoltaicos basados en a-Si mediante ablación directa con fuentes láser ultravioleta

Resumen En la última década la tecnología láser se ha convertido en una herramienta imprescindible en la fabricación de dispositivos fotovoltaicos, muy especial¬mente en aquellos basados en tecnología de lámina delgada. Independiente¬mente de crisis coyunturales en el sector, la evolución en los próximos años de estas tecnologías seguirá aprovechándose de la flexibilidad y calidad de proceso de la herramienta láser para la consecución de los dos objetivos básicos que harán de la fotovoltaica una opción energética económicamente viable: la reducción de costes de fabricación y el aumento de eficiencia de los dispositivos. Dentro de las tecnologías fotovoltaicas de lámina delgada, la tecnología de dispositivos basados en silicio amorfo ha tenido un gran desarrollo en sistemas estándar en configuración de superestrato, pero su limitada efi¬ciencia hace que su supervivencia futura pase por el desarrollo de formatos en configuración de substrato sobre materiales flexibles de bajo coste. En esta aproximación, las soluciones industriales basadas en láser actualmente disponibles para la interconexión monolítica de dispositivos no son aplica¬bles, y desde hace años se viene investigando en la búsqueda de soluciones apropiadas para el desarrollo de dichos procesos de interconexión de forma que sean transferibles a la industria. En este contexto, esta Tesis propone una aproximación completamente orig¬inal, demostrando la posibilidad de ejecutar una interconexión completa de estos dispositivos irradiando por el lado de la lámina (es decir de forma com¬patible con la opción de configuración de substrato y, valga la redundancia, con el substrato del dispositivo opaco), y con fuentes láser emitiendo en UV. Este resultado, obtenido por primera vez a nivel internacional con este trabajo, aporta un conocimiento revelador del verdadero potencial de estas fuentes en el desarrollo industrial futuro de estas tecnologías. Si bien muy posiblemente la solución industrial final requiera de una solución mixta con el empleo de fuentes en UV y, posiblemente, en otras longitudes de onda, esta Tesis y su planteamiento novedoso aportan un conocimiento de gran valor a la comunidad internacional por la originalidad del planteamiento seguido, los resultados parciales encontrados en su desarrollo (un número importante de los cuales han aparecido en revistas del JCR que recogen en la actualidad un número muy significativo de citas) y porque saca además a la luz, con las consideraciones físicas pertinentes, las limitaciones intrínsecas que el desarrollo de procesos de ablación directa selectiva con láseres UV en parte de los materiales utilizados presenta en el rango temporal de in¬teracción de ns y ps. En este trabajo se han desarrollado y optimizado los tres pasos estándar de interconexión (los habitualmente denominados Pl, P2 y P3 en la industria fotovoltaica) demostrando las ventajas y limitaciones del uso de fuentes en UV tanto con ancho temporal de ns como de ps. En particular destaca, por el éxito en los resultados obtenidos, el estudio de procesos de ablación selectiva de óxidos conductores transparentes (en este trabajo utilizados tanto como contacto frontal así como posterior en los módulos) que ha generado resultados, de excelente acogida científica a nivel internacional, cuya aplicación trasciende el ámbito de las tecnologías de silicio amorfo en lámina delgada. Además en este trabajo de Tesis, en el desarrollo del objetivo citado, se han puesto a punto técnicas de análisis de los procesos láser, basadas en métodos avanzados de caracterización de materiales (como el uso combi¬nado de la espectroscopia dispersiva de rayos X y la microscopía confocal de barrido) que se presentan como auténticos avances en el desarrollo de técnicas específicas de caracterización para el estudio de los procesos con láser de ablación selectiva de materiales en lámina delgada, procesos que no solo tienen impacto en el ámbito de la fotovoltaica, sino también en la microelectrónica, la biotecnología, la microfabricación, etc. Como resultado adicional, parte de los resultados de este trabajo, han sido aplicados exi¬tosamente por el grupo de investigaci´on en la que la autora desarrolla su labor para conseguir desarrollar procesos de enorme inter´es en otras tec-nolog´ıas fotovoltaicas, como las tecnolog´ıas est´andar de silicio amorfo sobre vidrio en configuraci´on de superestrato o el procesado de capas delgadas en tecnolog´ıas convencionales de silicio cristalino. Por u´ltimo decir que este trabajo ha sido posible por una colaboraci´on muy estrecha entre el Centro L´aser de la UPM, en el que la autora de¬sarrolla su labor, y el Grupo de Silicio Depositado del Centro de Inves¬tigaciones Energ´eticas, Medioambientales y Tecnol´ogicas, CIEMAT, que, junto al Grupo de Energ´ıa Fotovoltaica de la Universidad de Barcelona, han preparado la mayor parte de las muestras utilizadas en este estudio. Dichas colaboraciones se han desarrollado en el marco de varios proyectos de investigaci´on aplicada con subvenci´on pu´blica, tales como el proyecto singular estrat´egico PSE-MICROSIL08 (PSE-120000-2006-6), el proyecto INNDISOL (IPT-420000-2010-6), ambos financiados porel Fondo Europeo de Desarrollo Regional FEDER (UE) ”Una manera de hacer Europa y el MICINN, y los proyectos de Plan Nacional AMIC (ENE2010-21384-C04-´ 02) y CLASICO (ENE2007-6772-C04-04), cuya financiaci´on ha permitido en gran parte llevar a t´ermino este trabajo Abstract In the last decade, the laser technology has turned into an indispensable tool in the production of photovoltaic devices, especially of those based on thin film technology. Regardless the current crisis in the sector, the evolution of these technologies in the upcoming years will keep taking advantage of the flexibility and process quality of the laser tool for the accomplishment of the two basic goals that will convert the photovoltaic energy into economically viable: the manufacture cost reduction and the increase in the efficiency of the devices. Amongst the thin film laser technologies, the technology of devices based on amorphous silicon has had a great development in standard systems of superstrate configuration, but its limited efficiency makes its survival de¬pendant on the development of formats in substrate configuration with low cost flexible materials. In this approach, the laser industrial solutions cur¬rently available for the monolithic interconnection are not applicable, and in the last few years the investigations have been focused on the search of appropriate solutions for the development of such interconnection processes in a way that the same are transferable to the industry. In this context, this Thesis proposes a totally original approach, proving the possibility of executing a full interconnection of these devices by means of irradiation from the film side, i.e., compatible with the substrate con¬figuration, and with UV laser sources. This result, obtained for the first time at international level in this work, provides a revealing knowledge of the true potential of these sources in the future industrial development of these technologies. Even though very probably the final industrial solution will require a combination of the use of UV sources along with other wave¬lengths, this Thesis and its novel approach contribute with a high value to the international community because of the originality of the approach, the partial results found throughout its development (out of which, a large number has appeared in JCR journals that currently accumulate a signifi¬cant number of citations) and brings to light, with the pertinent scientific considerations, the intrinsic limitations that the selective direct ablation processes with UV laser present in the temporal range of interaction of ns and ps for part of the materials used in this study. More particularly, the three standard steps of interconnection (usually de¬nominated P1, P2 and P3 in the photovoltaic industry) have been developed and optimized, showing the advantages as well as the limitations of the use of UV sources in both the ns and ps pulse-width ranges. It is highly remark¬able, because of the success in the obtained results, the study of selective ablation processes in transparent conductive oxide (in this work used as a front and back contact), that has generated results, of excellent interna¬tional scientific reception, whose applications go beyond the scope of thin film photovoltaic technologies based on amorphous silicon. Moreover, in this Thesis, with the development of the mentioned goal, differ¬ent techniques of analysis of laser processes have been fine-tuned, basing the same in advanced methods for material characterization (like the combined use of EDX Analysis and Confocal Laser Scanning Microscopy) that can be presented as true breakthroughs in the development of specific techniques for characterization in the study of laser processes of selective ablation of materials in thin film technologies, processes that not only have impact in the photovoltaic field, but also in those of microelectronics, biotechnology, micro-fabrication, etc. As an additional outcome, part of the results of this work has been suc¬cessfully applied, by the investigation group to which the author belongs, to the development of processes of enormous interest within other photo¬voltaic technologies, such as the standard technologies on amorphous silicon over glass in superstrate configuration or the processing of thin layers in conventional technologies using crystalline silicon. Lastly, it is important to mention that this work has been possible thanks to the close cooperation between the Centro L´aser of the UPM, in which the author develops her work, and the Grupo de Silicio Depositado of Centro de Investigaciones Energ´eticas, Medioambientales y Tecnol´ogicas, CIEMAT, which, along with the Grupo de Energ´ıa Fotovoltaica of Univer¬sidad de Barcelona, has prepared the largest part of the samples utilized in this study. Such collaborations have been carried out in the context of several projects of applied investigation with public funding, like Proyecto Singular Estrat´egico PSE-MICROSIL08 (PSE-120000-2006-6), Proyecto IN-NDISOL (IPT-420000-2010-6), both funded by the European Regional De¬velopment Fund (ERDF), ”Una manera de hacer Europa” and MICINN, and the projects of Plan Nacional AMIC (ENE2010-21384-C04-02) and ´ CLASICO (ENE2007-6772-C04-04), whose funds have enabled the devel-opment of large part of this work.

Contribución a los arrays de antenas activos en microondas = Contribution to active array antennas at microwave bands

Esta tesis que tiene por título "Contribución a los arrays de antenas activos en banda X", ha sido desarrollada por el estudiante de doctorado Gonzalo Expósito Domínguez, ingeniero de telecomunicación en el Grupo de Radiación del Departamento de Señales, Sistemas y Radiocomunicaciones de la ETSI de Telecomunicación de la Universidad Politécnica de Madrid bajo la dirección de los doctores Manuel Sierra Castañer y José Manuel Fernández González. Esta tesis contiene un profundo estudio del arte en materia de antenas activas en el campo de apuntamiento electrónico. Este estudio comprende desde los fundamentos de este tipo de antenas, problemas de operación y limitaciones hasta los sistemas actuales más avanzados. En ella se identifican las partes críticas en el diseño y posteriormente se llevan a la práctica con el diseño, simulación y construcción de un subarray de una antena integrada en el fuselaje de un avión para comunicaciones multimedia por satélite que funciona en banda X. El prototipo consta de una red de distribución multihaz de banda ancha y una antena planar. El objetivo de esta tesis es el de aplicar nuevas técnicas al diseño de antenas de apuntamiento electrónico. Es por eso que las contribuciones originales son la aplicación de barreras electromagnéticas entre elementos radiantes para reducir los acoplamientos mutuos en arrays de exploración electrónica y el diseño de redes desfasadoras sencillas en las que no son necesarios complejos desfasadores para antenas multihaz. Hasta la fecha, las barreras electromagnéticas, Electronic Band Gap (EBG), se construyen en sustratos de permitividad alta con el fin de aumentar el espacio disponible entre elementos radiantes y reducir el tamaño de estas estructuras. Sin embargo, la utilización de sustratos de alta permitividad aumenta la propagación por ondas de superficie y con ellas el acoplo mutuo. Utilizando sustratos multicapa y colocando la vía de las estructuras en su borde, en vez de en su centro, se consigue reducir el tamaño sin necesidad de usar sustratos de alta permitividad, reducir la eficiencia de radiación de la antena o aumentar la propagación por ondas de superficie. La última parte de la tesis se dedica a las redes conmutadoras y desfasadoras para antenas multihaz. El diseño de las redes de distribución para antenas son una parte crítica ya que se comportan como un atenuador a la entrada de la cadena receptora, modificando en gran medida la figura de ruido del sistema. Las pérdidas de un desfasador digital varían con el desfase introducido, por ese motivo es necesario caracterizar y calibrar los dispositivos correctamente. Los trabajos presentados en este manuscrito constan de un desfasador reflectivo con un conmutador doble serie paralelo para igualar las pérdidas de inserción en los dos estados y también un conmutador de una entrada y dos salidas cuyos puertos están adaptados en todo momento independientemente del camino del conmutador para evitar las reflexiones y fugas entre redes o elementos radiantes. El tomo finaliza con un resumen de las publicaciones en revistas científicas y ponencias en congresos, nacionales e internacionales, el marco de trabajo en el que se ha desarrollado, las colaboraciones que se han realizado y las líneas de investigación futuras. ABSTRACT This thesis was carried out in the Radiation Group of the Signals, Systems and Radiocomunications department of ETSI de Telecomunicación from Technical University of Madrid. Its title is "Contribution to active array antennas at X band" and it is developed by Gonzalo Expósito Domínguez, Electrical Engineer MsC. under the supervision of Prof. Dr. Manuel Sierra Castañer and Dr. José Manuel Fernández González. This thesis is focused on active antennas, specifically multibeam and electronic steering antenas. In the first part of the thesis a thorough description of the state of the art is presented. This study compiles the fundamentals of this antennas, operation problems and limits, up to the breakthrough applications. The critical design problems are described to use them eventually in the design, simulation and prototyping of an airborne steering array antenna for satellite communication at X band. The main objective of this thesis is to apply new techniques to the design of electronically steering antennas. Therefore the new original contributions are the application of Electromagnetic Band Gap materials (EBG) between radiating elements to reduce the mutual coupling when phase shift between elements exist and phase shifting networks where special characteristics are required. So far, the EBG structures have been constructed with high permitivity substrates in order to increase the available space between radiating elements and reduce the size of the structures. However, the surface wave propagation modes are enhanced and therefore the mutual coupling increases when high permitivity substrates are used. By using multilayered substrates and edge location via, the size is reduced meanwhile low permitivity substrates are used without reducing the radiation efficiency or enhancing the surface propagation modes. The last part of the thesis is focused on the phase shifting distribution networks for multibeam antennas. This is a critical part in the antenna design because the insertion loss in the distribution network behaves as an attenuator located in the first place in a receiver chain. The insertion loss will affect directly to the receiver noise figure and the insertion loss in a phase shifter vary with the phase shift. Therefore the devices must be well characterized and calibrated in order to obtain a properly operation. The work developed in this thesis are a reflective phase shifter with a series-shunt switch in order to make symmetrical the insertion loss for the two states and a complex Single Pole Double Through (SPDT) with matched ports in order to reduce the reflections and leakage between feeding networks and radiating elements. The end of this Ph D. dissertation concludes with a summary of the publications in national and international conferences and scientific journals, the collaborations carried out along the thesis and the future research lines.

AFRICA BUILD Portal: developing a social network of African health researchers and educators

One of the main outputs of the project is a collaborative platform which integrates a myriad of research and learning resources. This article presents the first prototype of this platform: the AFRICA BUILD Portal (ABP 1.0). The ABP is a Web 2.0 platform which facilitates the access, in a collaborative manner, to these resources. Through a usable web interface, the ABP has been designed to avoid, as much as possible, the connectivity problems of African institutions. In this paper, we suggest that the access to complex systems does not imply slow response rates, and that their development model guides the project to a natural technological transfer, adaptation and user acceptance. Finally, this platform aims to motivate research attitudes during the learning process and stimulate user?s collaborations.

Diseño de una metodología para la normalización del paisaje en España a partir del análisis de normas y de estudios cienciométricos: Aplicación al impacto paisajístico de las infraestructuras de transporte

La presente tesis se enmarca dentro de los trabajos realizados en el Proyecto CENIT OASIS (Operación de Autopistas Seguras Inteligentes y Sostenibles) sobre el impacto y la integración paisajística de las autopistas, y en los trabajos realizados por el grupo de trabajo GT 13 (paisaje) dentro del comité técnico nacional CTN 157 (proyectos) para normalización del Paisaje en España, del que la doctoranda es secretaria técnica. El objetivo principal de esta tesis es desarrollar una Metodología que permita la normalización del paisaje en España. Por ello, establece las bases para el desarrollo científico y profesional en el ámbito del paisaje, a través de la caracterización de la actividad científica y de la actividad normalizadora internacional. Para después elaborar una propuesta de documentos normativos para su regulación en España. Por último, se pone en práctica la única de las normas aplicables a un caso real, concretamente en la AP-7 a su paso por la provincia de Gerona. La caracterización de la actividad científica en el ámbito del paisaje proporciona una visión global que sirve de referencia a las futuras investigaciones en la materia, no existente hasta la fecha. Entre los múltiples resultados, se identifican las áreas de conocimiento y disciplinas afines desde las que se aborda el paisaje, se analiza la evolución de las temáticas y líneas de investigación en el campo, se determina la distribución e impacto de la producción científica, destacando los países y centros de investigación punteros y sus colaboraciones, y se determinan las publicaciones más destacadas en la materia. La caracterización de la actividad normativa internacional hasta la fecha supone un referente en este campo, habiendo traducido, analizado y clasificado decenas de documentos sobre temas como la terminología, la profesión de paisajista, las reglas generales para las intervenciones en el paisaje, las normas para la protección del paisaje y normas para la evaluación del impacto paisajístico. La tesis desarrolla tres documentos normativos, que se espera sean el germen de los futuros documentos legales para normalización del Paisaje en España. El principal objetivo de la normalización es dotar a los profesionales de las herramientas necesarias para desarrollar sus intervenciones en el paisaje. Para ello, se ha elaborado un documento normativo sobre terminología del concepto clave y los términos asociados en castellano, que sirva de referencia para un futuro documento normativo; un documento normativo que regule los estudios de integración e impacto paisajístico en España, definiendo una serie de pautas que ayuden a los profesionales a desarrollar los proyectos de intervención en el paisaje; un documento que regule y defina la profesión de arquitecto paisajista, identificando sus capacidades, formaciones y competencias. Por último, el documento de impacto e integración paisajística se aplica a un caso concreto de infraestructuras del transporte, dentro del proyecto OASIS, sirviendo como ejemplo a los profesionales de la materia para desarrollar futuras intervenciones. El enfoque de este documento coincide con el de paisaje ecológico, el análisis del paisaje se aborda desde lo visible (fenosistema) y desde los procesos que lo conforman (criptosistema). Y las medidas de integración pretenden conseguir que la infraestructura forme parte del paisaje y de los procesos que ocurren en él, lo que en la tesis se define como Infraestructuras Verdes. ABSTRACT The thesis is within the framework of the CENIT OASIS Project (Operation of Safe, Intelligent and Sustainable Highways) about the landscape impact and integration of highways, and the work done by the working group GT 13 (landscape) in the national technical committee CTN 157 (projects) for landscape standardization in Spain, of which the PhD is technical secretary. The main objective of this thesis is to develop a Methodology that allows the landscape standardization in Spain. Therefore, it establishes the basis for the scientific and professional development in the landscape field, through the characterization of scientific and international normalizing activity. It concludes with the proposal of regulatory documents for its use in Spain. Finally, it implements the only of the rules applicable to a real case, specifically in the AP- 7 passing through the Gerona province. The characterization of scientific activity in the landscape field provides an overview that is a reference in the researches in this field, non-existent to date. Among the many results, the areas of knowledge and related disciplines, from which the landscape is addressed, are identified; the evolution of topics and lines of research in the field are analyzed; the distribution and impact of scientific production is determined, highlighting the countries and leading research centers and collaborations; and the leading publications in the field are determined. The characterization of the international regulatory activity to date is a model in this field, having translated, analyzed and classified dozens of papers about terminology, the landscapist profession, general rules for intervention in the landscape, standards for the landscape protection and rules for the assessment of landscape impact. The thesis develops three normative documents, which are expected to be the germ of future legal documents for standardization landscape in Spain. The main objective of standardization is to provide the necessary tools for professionals who work developing interventions in the landscape. To do this, it has been developed a normative document about terminology on the key concept and the associated terms in Castilian, as a reference for a future normative document; a normative document that regulates studies of landscape integration and impact in Spain, defining a set of guidelines to help professionals to develop intervention projects in the landscape; a document to regulate and define the activities developed by the professionals, defining the profession of landscape architect, their capabilities and competencies. Finally, the document of landscape impact and integration is applied to a particular case of transport infrastructures within the OASIS project, serving as an example to professionals in the field to develop future interventions. The focus of this document coincides with the ecological landscape; the landscape analysis is approached from the visible (fenosystem) and from the processes that shape it (cryptosystem); and integration measures aim to achieve that the infrastructure take part of the landscape and its existing processes, which in this thesis is defined as Green Infrastructures.

Standing together for reproducibility in large-scale computing: report on reproducibility@XSEDE

This is the final report on reproducibility@xsede, a one-day workshop held in conjunction with XSEDE14, the annual conference of the Extreme Science and Engineering Discovery Environment (XSEDE). The workshop's discussion-oriented agenda focused on reproducibility in large-scale computational research. Two important themes capture the spirit of the workshop submissions and discussions: (1) organizational stakeholders, especially supercomputer centers, are in a unique position to promote, enable, and support reproducible research; and (2) individual researchers should conduct each experiment as though someone will replicate that experiment. Participants documented numerous issues, questions, technologies, practices, and potentially promising initiatives emerging from the discussion, but also highlighted four areas of particular interest to XSEDE: (1) documentation and training that promotes reproducible research; (2) system-level tools that provide build- and run-time information at the level of the individual job; (3) the need to model best practices in research collaborations involving XSEDE staff; and (4) continued work on gateways and related technologies. In addition, an intriguing question emerged from the day's interactions: would there be value in establishing an annual award for excellence in reproducible research? Overview

La arquitectura religiosa de Luis Cubillo de Arteaga (1954-1974)

Esta Tesis Doctoral viene a cubrir el vacío existente referido a la arquitectura religiosa de Luis Cubillo de Arteaga, arquitecto conocido fundamentalmente por su aportación a la vivienda social madrileña en los años 50 y 60, pero con una abundante obra sacra. Para ello se ha estudiado la totalidad de su producción, que abarca desde 1954 hasta 1974. La Tesis analiza su arquitectura religiosa desde varios puntos de vista, que incluyen la implantación de los edificios y sus aspectos formales, constructivos y tipológicos, estos últimos especialmente destacados tras las directrices emanadas del Concilio Vaticano II. Previamente se analizan cuatro ámbitos relevantes en la arquitectura religiosa de Cubillo. En primer lugar se estudia la labor de la Dirección General de Asuntos Eclesiásticos, a la que estaba adscrito el arquitecto y para la que realizó sus primeros trabajos. Dentro de ella se expone la evolución del modelo de Seminario entre los años 40 y 60, para analizar la relevancia de la propuesta de Cubillo para el Seminario de Castellón. A continuación se trata la participación de Cubillo en la construcción de la periferia de Madrid, aunque no referida a sus conocidos trabajos sobre vivienda social, sino a los edificios dotacionales. Así mismo se expone una iniciativa hasta ahora inédita de la Comisaría de Ordenación Urbana de Madrid para dotar de centros parroquiales a los nuevos barrios. Un tercer bloque estudia un tema recurrente a finales de los años 50, la integración de las artes en la nueva arquitectura religiosa, propiciada principalmente por José Luis Fernández del Amo. En el caso de Cubillo, las colaboraciones más notables y objeto de estudio en esta Tesis, fueron las realizadas con los artistas Arcadio Blasco y José Luis Sánchez. Por último se describe la situación de la iglesia madrileña posconciliar y su plan de construcción de nuevos templos, en el que jugó un papel muy destacado Cubillo, convertido en arquitecto de confianza de la Oficina Técnica del Arzobispado-------------------------ABSTRACT------------------------------ This Doctoral Thesis fills the emptiness of knowledge about the religious architecture of Luis Cubillo de Arteaga, architect mainly known for his contribution to Madrid's social housing in the 50s and 60s, but with a wide sacred work. To this end it have been studied his entire production, ranging from 1954 to 1974. The thesis discusses his religious architecture from several points of view, including the implementation of the buildings and their formal, constructive and typological aspects, the latter especially important by following the guidelines issued by Vatican II. Previously, four relevant areas in Cubillo’s religious architecture are analyzed. First of all, it’s studied the work of the Department of Ecclesiastical Affairs, to which the architect was assigned and for whom he made his early works. As a part of it, is exposed the evolution of Seminar model between 40s and 60s, to discuss the relevance of Cubillo’s design for the Seminar of Castellón. Next, it´s studied the participation of Cubillo in the construction of the outskirts of Madrid, although not referring to his well known work on social housing, but to the design of the comunitary buildings. It’s also explained an unpublished initiative from Commissariat for Urban Planning of Madrid to provide parish centers to new neighborhoods. A third section examines a recurring theme in the late 50s, the integration of the arts in the new religious architecture, mainly leaded by José Luis Fernández del Amo. For Cubillo, the most notable collaborations, studied in this thesis, were with the artists Arcadio Blasco and José Luis Sánchez. Finally, it´s described the situation of the post-conciliar church in Madrid and its plan to build new temples, with a prominent role of Cubillo, that became in trusted architect of the Technical Office of the Archbishop.

Biomimetismo entre los endemismos arquitectónicos y taxones en Cantabria

Es notoria la importancia de la naturaleza en la evolución de la arquitectura. Hasta la gran eclosión de la industria manufacturera y la mejora en las infraestructuras de comunicación, se podría decir que ambas corrían paralelas, para a partir de ahí dejar “congelada” la sabiduría popular y dar un salto a la globalidad, generando una situación de libertad arquitectónica prácticamente total, que independiza la construcción de su ubicación. "El biomimetismo es esencialmente un campo de investigación interdisciplinar, una serie de colaboraciones entre botánicos, físicos, matemáticos, ingenieros y zoólogos; donde la rígida división entre disciplinas «puras» cede lugar a un área de investigación que apunta a generar tecnología inteligente (smarttechnologies), utilizando materiales o procesos que sean de alguna manera sensibles al medio ambiente." (M. Weinstock, 1998). “La morfología de las plantas en los diferentes climas parece tener cierta analogía con la edificación, ya que algunas de las tensiones que inciden en su forma (tales como las variaciones de temperatura) corresponden de manera similar a las necesidades humanas.” (V. Olgyay 1963). En el presente trabajo se han estudiado las especies endémicas que nos rodean, para poder leer a través de ellas millones de años de supervivencia en este entorno, con el fin de mimetizar sus respuestas. También se han estudiado diferentes tipologías de arquitectura vernácula y su simulación energética, con el propósito de evaluar la demanda energética optima exigible. A partir de una ubicación específica, la orientación, compacidad, perforación y las características de la envolvente son los elementos que más influyen en la demanda energética de una edificación. Tanto la forma como los materiales pueden ser mimetizados con la naturaleza. En esta Tesis se han cuantificado los parámetros de diseño formales tomando como referencia las especies vegetales o la arquitectura vernácula, sin perder de vista los objetivos buscados por normativas o institutos en la reducción del consumo energético vinculado a la calefacción y ventilación. ABSTRACT The importance of the nature in the evolution of the architecture is well-known. Until the great burst of the manufacturing industry and the improvement in communication infrastructures, it would be possible to be said that both ran parallel, stops there from leaving “frozen” the popular wisdom and jump to the globalization, creating a situation almost complete architectural freedom, that it frees the construction of its location. "Biomimicry is essentially an interdisciplinary field of research, a series of collaborations among botanists, physicists, mathematicians, engineers and zoologists; where the rigid division between "pure" disciplines gives way to an area of research that aims to generate intelligent technology (smarttechnologies), using materials and processes that are in some environmentally sensitive manner. "(M. Weinstock, 1998). “The morphology of the plants in different climates seems to have some analogy with the building, as some of the tensions that affect their form (such as the temperature variations) are similar to the human necessities.” (V. Olgyay 1963). In the present work, the endemic species that surround to us have been studied, to be able to read through them millions of years of survival in this environment, in order to mimic their answers. Also different types or popular architecture and their energy simulation have been studied, in order to evaluate the rate of energy optimum demand. Orientation, compactness, perforation and characteristics of the envelope are the elements that influence more in the energy demand of a building. The shape and materials can be mimic with nature. Each of them has been quantified in this work by reference plant species or popular architecture, without losing sight of the objectives sought by regulations or institutes about reduction in energy consumption.

The University of Minnesota Biocatalysis/Biodegradation Database: emphasizing enzymes

The University of Minnesota Biocatalysis/Biodegradation Database (UM-BBD, http://umbbd.ahc.umn.edu/) provides curated information on microbial catabolic enzymes and their organization into metabolic pathways. Currently, it contains information on over 400 enzymes. In the last year the enzyme page was enhanced to contain more internal and external links; it also displays the different metabolic pathways in which each enzyme participates. In collaboration with the Nomenclature Commission of the International Union of Biochemistry and Molecular Biology, 35 UM-BBD enzymes were assigned complete EC codes during 2000. Bacterial oxygenases are heavily represented in the UM-BBD; they are known to have broad substrate specificity. A compilation of known reactions of naphthalene and toluene dioxygenases were recently added to the UM-BBD; 73 and 108 were listed respectively. In 2000 the UM-BBD is mirrored by two prestigious groups: the European Bioinformatics Institute and KEGG (the Kyoto Encyclopedia of Genes and Genomes). Collaborations with other groups are being developed. The increased emphasis on UM-BBD enzymes is important for predicting novel metabolic pathways that might exist in nature or could be engineered. It also is important for current efforts in microbial genome annotation.

Multiwavelength study of quiescent states of MrK 421 with unprecedented hard x-Ray coverage provided by NuStar in 2013

We present coordinated multiwavelength observations of the bright, nearby BL Lacertae object Mrk 421 taken in 2013 January–March, involving GASP-WEBT, Swift, NuSTAR, Fermi-LAT, MAGIC, VERITAS, and other collaborations and instruments, providing data from radio to very high energy (VHE) γ-ray bands. NuSTAR yielded previously unattainable sensitivity in the 3–79 keV range, revealing that the spectrum softens when the source is dimmer until the X-ray spectral shape saturates into a steep G » 3 power law, with no evidence for an exponential cutoff or additional hard components up "aprox" 80keV. For the first time, we observed both the synchrotron and the inverse-Compton peaks of the spectral energy distribution (SED) simultaneously shifted to frequencies below the typical quiescent state by an order of magnitude. The fractional variability as a function of photon energy shows a double-bump structure that relates to the two bumps of the broadband SED. In each bump, the variability increases with energy, which, in the framework of the synchrotron self-Compton model, implies that the electrons with higher energies are more variable. The measured multi band variability, the significant X-ray-toVHE correlation down to some of the lowest fluxes ever observed in both bands, the lack of correlation between optical/UV and X-ray flux, the low degree of polarization and its significant (random) variations, the short estimated electron cooling time, and the significantly longer variability timescale observed in the NuSTAR light curves point toward in situ electron acceleration and suggest that there are multiple compact regions contributing to the broadband emission of Mrk 421 during low-activity states.

Multiple Perspectives on Academic Service-Learning Partnerships at the American University in Cairo: A Mixed Method Study

This mixed method study aimed to redress the gap in the literature on academic service-learning partnerships, especially in Eastern settings. It utilized Enos and Morton's (2003) theoretical framework to explore these partnerships at the American University in Cairo (AUC). Seventy-nine community partners, administrators, faculty members, and students from a diverse range of age, citizenship, racial, educational, and professional backgrounds participated in the study. Qualitative interviews were conducted with members of these four groups, and a survey with both close-ended and open-ended questions administered to students yielded 61 responses. Qualitative analyses revealed that the primary motivators for partners' engagement in service-learning partnerships included contributing to the community, enhancing students' learning and growth, and achieving the civic mission of the University. These partnerships were characterized by short-term relationships with partners' aspiring to progress toward long-term commitments. The challenges to these partnerships included issues pertaining to the institution, partnering organizations, culture, politics, pedagogy, students, and faculty members. Key strategies for improving these partnerships included institutionalizing service-learning in the University and cultivating an institutional culture supportive of community engagement. Quantitative analyses showed statistically significant relationships between students' scores on the Community Awareness and Interpersonal Effectiveness scales and their overall participation in community service activities inside and outside the classroom, as well as a statistically significant difference between their scores on the Community Awareness scale and department offering service-learning courses. The study's outcomes underscore the role of the local culture in shaping service-learning partnerships, as well as the role of both curricular and extracurricular activities in boosting students' awareness of their community and interpersonal effectiveness. Cultivating a culture of community engagement and building support mechanisms for engaged scholarship are among the critical steps required by public policy-makers in Egypt to promote service-learning in Egyptian higher education. Institutionalizing service-learning partnerships at AUC and enhancing the visibility of these partnerships on campus and in the community are essential to the future growth of these collaborations. Future studies should explore factors affecting community partners' satisfaction with these partnerships, top-down and bottom-up support to service-learning, the value of reflection to faculty members, and the influence of students' economic backgrounds on their involvement in service-learning partnerships.

La narrativa en La Ilustración (1849-1857): la «Serie B» del Semanario Pintoresco Español

En los ocho años de vida de La Ilustración, la narrativa, larga y breve, fue uno de los elementos fundamentales de este periódico ilustrado. El artículo analiza los relatos que allí aparecieron y los efectos que las necesidades industriales y comerciales tuvieron en una revista que luchaba por sobrevivir económicamente. Ángel Fernández de los Ríos, propietario del Semanario Pintoresco Español y de La Ilustración, convirtió a esta última, en lo que toca a la narrativa, en una especie de serie B, en la que se entremezclaban reediciones, traducciones y colaboraciones que no habían llegado a tener el nivel suficiente para llegar a las páginas del Semanario Pintoresco Español. La abundancia de reediciones y las diversas fuentes de las que proceden hacen ver que en su selección fue más importante la imperiosa necesidad de sacar la publicación a la calle cada quince días que otros criterios. Ello también explica la abundancia de traducciones de novelas y cuentos en las páginas de La Ilustración. Traducciones y reediciones son el cuerpo principal de la narrativa publicada en La Ilustración y si tenemos que detenernos en las obras de más calidad que allí aparecen, será en este tipo de relatos, puesto que los textos narrativos originales, muy a menudo publicados sin firma de autor, resultan de muy escaso interés. Solo podemos contra con la excepción de dos relatos de José Güell y Renté (Anacaona y Quibiam) y uno de Gertrudis Gómez de Avellaneda: La baronesa de Joux. No representa, pues, La Ilustración una fuente de importancia para la narración española del medio siglo. Su posición subordinada al Semanario Pintoresco Español impidió que la publicación desarrollara una línea de narraciones de calidad. Es testimonio, sin embargo, de un proceso de industrialización de la labor periodística y literaria que estaba desarrollándose con gran celeridad si tenemos en cuenta el fracaso de El Artista y del No me olvides apenas quince años antes. A la altura del medio siglo el periodismo literario se había convertido en una industria que exigía ingentes esfuerzos de trabajo y una producción torrencial.

The donor star of the X-ray pulsar X1908+075

High-mass X-ray binaries consist of a massive donor star and a compact object. While several of those systems have been well studied in X-rays, little is known for most of the donor stars as they are often heavily obscured in the optical and ultraviolet regime. There is an opportunity to observe them at infrared wavelengths, however. The goal of this study is to obtain the stellar and wind parameters of the donor star in the X1908+075 high-mass X-ray binary system with a stellar atmosphere model to check whether previous studies from X-ray observations and spectral morphology lead to a sufficient description of the donor star. We obtained H- and K-band spectra of X1908+075 and analysed them with the Potsdam Wolf-Rayet (PoWR) model atmosphere code. For the first time, we calculated a stellar atmosphere model for the donor star, whose main parameters are: Mspec = 15 ± 6 M⊙, T∗ = 23-3+6 kK, log geff = 3.0 ± 0.2 and log L/L⊙ = 4.81 ± 0.25. The obtained parameters point towards an early B-type (B0–B3) star, probably in a supergiant phase. Moreover we determined a more accurate distance to the system of 4.85 ± 0.50 kpc than the previously reported value.